Niles Audio DXS-65 User Manual

Size:
245.68 Kb
Download

DXS-65

 

 

 

1. PRODUCT DESCRIPTION

2. FEATURES

 

 

 

 

 

The Model DXS-65is a supervisedwater-resistantemergency alarm transmitter designed for use with Linear’s

 

 

OPTIONAL BLANK

 

 

 

PERS Consoles and can also be used with other Linear DX or DXS format receivers. This transmitter features

 

 

 

 

 

BY

a large, easy to fi nd, HELP button. An optional blank face aqua colored button is included for custom labeling

 

 

AQUA BUTTON

 

 

 

 

or alternate uses. Pressing the button activates the transmitter and sends a digitally coded wireless signal to its

 

DXS-65

TRANSMIT

 

 

 

 

 

companion receiver. To insure sending a complete signal, press the transmitter button for a minimum of

 

INDICATOR

 

Supervised Emergency

 

 

 

TRANSMITTER

MOUNTING

 

 

two seconds.

 

 

 

 

 

 

 

 

 

PLATE

 

 

 

 

 

 

 

 

 

Alarm Transmitter

 

 

The transmitter can be wall mounted using the integral snap-onmounting bracket, or simply be placed on a table.

 

 

 

 

 

 

required. The transmitter can send a signal for up to 10 seconds per activation. The red operation indicator lights

 

 

 

 

 

 

 

 

Four rubber “feet” are supplied for table-topuse. TheDXS-65is factory set to a unique code, so no fi eld coding is

 

 

 

 

Installation

 

 

 

when the transmitter is activated.

 

 

 

 

 

 

 

 

An optional supervisory status timer is included in the DXS-65.Status transmissions occur every two hours and

 

 

 

 

 

 

 

 

 

 

 

 

Instructions

 

 

 

inform the receiver of the condition of the transmitter and its batteries. The factory setting has the status timer

 

 

 

 

 

 

 

disabled. The status timer can be enabled by pressing the HELP button continuously for fi ve seconds. The red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

operation indicator will blink as the status timer is enabled. The status timer can be disabled by removing the

 

 

 

 

 

 

 

 

power from the transmitter. NOTE: If the status timer is required for the installation, be sure to enable it after

 

 

 

 

 

 

 

 

replacing the transmitter’s batteries.

 

 

 

 

 

 

 

 

 

Every two hours the transmitter tests for low batteries. This test takes place even if the status transmissions have

 

 

 

 

 

 

 

 

not been enabled. If the batteries test low, a low battery signal is sent to the receiver.

 

 

 

 

 

 

 

 

Each transmitter is sealed to provide water-resistance.The transmitter is powered by two 2032“coin-cell”batteries

 

 

ACTIVATION

 

 

 

 

 

and must be disassembled to replace the batteries.

 

 

 

 

 

 

 

 

 

BUTTON

 

 

 

 

 

Before system testing and operation, each transmitter must be programmed into its receiver. Refer to the receiver’s

 

 

MOUNTING

 

 

 

 

 

 

TABLE-TOP

 

USA & Canada (800) 421-1587& (800)392-0123

 

or Console’s instructions for details on programming transmitters into the system. When using a PERS or DVS

 

 

 

 

 

 

FEET (4)

SCREWS (2)

 

(760) 438-7000- Toll Free FAX (800)468-1340

 

Console, be sure to program the receiver for the correct sensor type and supervision option using the

 

 

 

www.linearcorp.com

 

 

RA-2400 programming software. (Note: DVS Consoles default theDXS-65as an arm/disarm transmitter.)

 

 

 

 

3. OPTIONAL WALL MOUNTING

 

 

4. STATUS SUPERVISION OPTION

5. PROGRAM TRANSMITTER INTO RECEIVER

 

 

ATTACH WALL

HOOK TOP OF TRANSMITTER

 

 

 

 

 

 

 

MOUNT BRACKET

 

RED INDICATOR

 

 

1 PLACE THE CONSOLE OR RECEIVER

 

ONTO THE BRACKET TABS

TO ENABLE THE HOURLY

 

 

 

WITH TWO SCREWS

WILL BLINK WHEN

 

 

 

 

 

SUPERVISORY STATUS

 

 

INTO PROGRAMMING MODE

 

 

 

SWING TRANSMITTER

STATUS IS ENABLED

 

 

 

 

 

 

 

REPORTS, PRESS THE HELP

 

 

 

 

 

 

 

 

 

 

2 ACTIVATE THE TRANSMITTER

 

 

 

ONTO BRACKET

BUTTON FOR 5 SECONDS

 

 

 

 

 

 

 

 

 

 

 

TO PROGRAM IT INTO THE

 

 

 

 

 

NOTE: THE RED INDICATOR

 

 

CONSOLE OR RECEIVER

 

 

 

 

 

 

WILL NOT LIGHT EACH TIME

 

 

 

 

 

 

 

 

 

AN AUTOMATIC HOURLY

 

 

 

 

 

 

 

 

 

STATUS REPORT IS SENT

 

 

 

 

 

 

 

 

 

 

 

NOTE: IF THE TRANSMITTER

 

 

 

 

 

 

 

 

HAS SUPERVISION ENABLED,

 

 

 

 

 

 

IMPORTANT!

 

BE SURE TO PROGRAM THE

 

 

 

 

 

 

 

CONSOLE WITH THE SENSOR

 

 

 

 

 

AFTER ENABLING STATUS REPORTS ON THE

 

 

 

 

 

TO REMOVE

 

OPTION SET AS SUPERVISED

 

FOR NON-WALLMOUNT APPLICATIONS,

 

TRANSMITTER, BE SURE TO SET THE SENSOR NUMBER

 

 

 

 

FOR THIS TRANSMITTER

 

 

TRANSMITTER

 

 

 

IN THE PERS OR DVS CONSOLE TO SUPERVISED USING THE

 

 

STICK THE FOUR ADHESIVE "FEET"

 

 

 

PERS-3600B

 

 

PRESS TAB ON

 

 

 

ONTO THE MOUNTING BRACKET

 

 

RA-2400PROGRAMMING SOFTWARE

 

 

CONSOLE

 

 

BRACKET

 

 

 

 

 

 

 

 

 

 

 

 

 

6. TESTING TRANSMITTER

 

 

7. BATTERY REPLACEMENT OR BUTTON EXCHANGING

 

 

LINEAR LIMITED WARRANTY

 

 

 

 

 

 

1 TWIST A COIN OR SCREWDRIVER IN

This Linear product is warranted against defects in material and workmanship for twelve (12) months. This

 

 

 

 

 

warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal

 

1 PLACE THE CONSOLE OR RECEIVER

 

THE SLOT ON TOP OF TRANSMITTER

distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their

 

INTO TEST MODE

 

TO OPEN THE CASE

selling dealer as to the nature of the dealer’s warranty, if any. There are no obligations or liabilities on the part

 

 

 

 

 

 

of Linear LLC for consequential damages arising out of or in connection with use or performance of this

 

2 ACTIVATE THE TRANSMITTER,

 

2 REMOVE THE CASE TOP, BUTTON, SILICONE

product or other indirect damages with respect to loss of property, revenue, or profit, or cost of removal,

 

 

SEAL, AND LIFT OUT THE TRANSMITTER

installation, or reinstallation. All implied warranties, including implied warranties for merchantability and implied

 

VERIFY THAT THE SIGNAL WAS

 

CIRCUIT BOARD

warranties for fi tness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of all other

 

 

warranties express or implied.

 

 

RECEIVED

 

3

 

 

 

 

 

All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear

 

 

 

 

REPLACE THE BATTERIES WITH

Technical Services at 1-800-421-1587for an RPA# and other important details.

 

 

 

 

 

TWO TYPE 2032 COIN-CELL

 

 

 

IMPORTANT !!!

 

 

 

 

 

BATTERIES, PLUS SIDE AWAY

 

Linear radio controls provide a reliable communications link and fi ll an important need in portable wireless

NOTE: TO VERIFY THE RADIO

 

 

FROM THE CIRCUIT BOARD

 

signaling. However, there are some limitations which must be observed.

 

 

 

4

 

For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15

RANGE, BE SURE TO TEST

 

 

 

 

devices. As such, they have limited transmitter power and therefore limited range.

 

 

 

 

 

 

 

THE TRANSMITTER FROM THE

 

 

RE-ASSEMBLETHE UNIT

 

A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals

INTENDED MOUNTED OR

 

 

BY REVERSING THE STEPS

 

 

that occur on or near their operating frequencies, regardless of code settings.

 

 

 

 

• Changes or modifi cations to the device may void FCC compliance.

 

TABLE-TOPLOCATION

 

 

 

5

 

 

 

 

 

 

• Infrequently used radio links should be tested regularly to protect against undetected interference or fault.

 

 

 

 

NOTE: IF THE STATUS TIMER IS REQUIRED

 

PERS-3600B

 

 

TEST THE TRANSMITTER

A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or

TEST SYSTEM WEEKLY!

 

 

FOR THE INSTALLATION, BE SURE TO ENABLE

 

dealer, and these facts should be communicated to the ultimate users.

 

CONSOLE

 

 

AFTER RE-ASSEMBLING

IT AFTER REPLACING THE BATTERIES

Copyright © 2008 Linear LLC

228490 B