Niles Audio CAM-DFMK User Manual

Size:
2.47 Mb
Download

I N S TA L L AT I O N G U I D E

FOR USE WITH COLOR CCTV CAMERA D O M E C A M E R A K I T

CAM-DFMK

CONGRATULATIONS!

Thank you for choosing the CAM-DFMKDome Camera Kit from Niles. With proper installation and operation, you should enjoy years oftrouble-freeuse.

Niles manufactures the industry’s most complete line of custom installation components and accessories for audio/video systems. To see the complete Niles product assortment, visit us on the Internet at: www.nilesaudio.com.

TABLE OF CONTENTS

 

Introduction

2

 

 

Features

2

 

 

Installation Considerations

3

 

 

Limited Warranty

8

 

 

Warranty Registration Card

9

 

 

NILES AUDIO CORPORATION – 1-800-BUY-HIFI

 

1

 

INTRODUCTION

NILES’ CAM-DFMKDome Camera Kit is designed to enhance the installation options of theCAM-PBColor CCTV camera (sold separately). Available in white or black, this unit enablesflush-mountorsurface-mountoptions for discrete, attractive CCTV camera installation. Please see theCAM-PBcolor CCTV Camerapre-wireand installation instructions for detailed specifications for theCAM-PB.

The dome assembly can be installed flush-mountorsurface-mountdepending on the application. Installers desiring stealthy,low-profilemounting should use theflush-mountoption, whileretro-fitapplications take advantage of thesurface-mountoption. Hardware is included for both installation methods.

FEATURES

Low-Profile/SmallSize

Flush-Mount/Surface-Mount

Easy Assembly/Installation

2

INSTALLATION

SURFACE MOUNT

The surface-mounthardware included with the Dome Camera Kit allows easy installation in almost anysituation–includingretro-fitapplications. Provisions must be made for physical wire connections, but the camera assembly itself is simply screwed in place.

TO INSTALL CAMERA USING SURFACE-MOUNTKIT:

Figure 1

Camera Main housing top bracket

Dome

Camera housing base

1.Drill 3/4” diameter hole in mounting surface to accommodate wiring.

2.Mount main bracket to desired location using three 1/2” screws.

Figure 2

Use 1/2" Screws

3.Place camera inside of camera housing base. Make sure wires extend through base.

4.Place camera housing top on camera housing base and secure with two 1/4” screws.

Figure 3

Use 1/4" Screws

 

NILES AUDIO CORPORATION – 1-800-BUY-HIFI

3

5.Feed camera leads through hole in mounting surface. Connect wires (see WIRING.)

6.Place assembled camera housing into main bracket.

7.Place dome over camera housing and attach to main bracket with 3 large screws. Do not tighten completely.

Figure 4

Use 1/2" Screws

8.Make provisions to view the camera image and point the camera at the desired location. Note: Make sure image is level!

9.With camera properly aimed, tighten screws.

Figure 5

WIRING

1. Adjust view

2.Tighten screws

NOTE: THE CAM-PBREQUIRES RG6 OR RG59 COAXIAL CABLE FOR VIDEO, ANDTWO-CONDUCTOR,18 AWG WIRE FOR POWER. USE THE CAMERA’S INCLUDED POWER SUPPLY FOR PROPER OPERATION. NO CABLES OR WIRES ARE SHIPPED WITH THE CAMERA KIT.

Figure 6

RG6 or

RG59

Coax

To video display,

Male RCA to

female F

Z880, MOD3000 etc.

connector

12VDC

Stripe = +

Black

 

+

 

Supplied with CAM-PB

 

Red

 

 

 

4

Remove

 

FLUSH-MOUNT

The flush-mountkit is used to acheivelow-profileinstallations where stealth and concealment are priorities. A hole must be cut in the desired mounting surface.

Figure 7

Camera Main housing top bracket

Trim ring

Bayonet Cameramount housing base

TO INSTALL CAMERA USING FLUSH-MOUNTKIT:

1. Cut a 3 1/4” diameter hole in mounting surface.

Figure 8

3 1/4" inch

 

diameter hole

2.Place camera inside of camera housing base. Make sure wires extend through base.

3.Place camera housing top on camera housing base and secure with two 1/4” screws.

Figure 9

Use 1/4" screws

4.Connect wires.

5.Place assembled camera housing into main bracket. Place bayonet mount over camera housing and attach to main bracket with three 1/2” screws. Do not tighten completely.

Figure 10

Use 1/2" screws

NILES AUDIO CORPORATION – 1-800-BUY-HIFI

 

5

 

6.Place entire assembly into hole.

Figure 11

7.Turn dog screws clockwise until dogs are snug. Over-tighteningdogs can keep trim ring from snapping in place. If trim ring does not snap into place, loosen screws slightly.

Figure 12

Front view

Re

Rear view

Access holes

NOTE: ACCESS HOLES ARE PROVIDED TO LOOSEN DOGS IN CASE THEY BECOME STUCK.

8.Make provisions to view the camera image and point the camera at the desired location.

IMPORTANT: MAKE SURE THAT THE IMAGE IS LEVEL!

9.With camera properly aimed, tighten screws.

10. Align trim ring with slots in bayonnet mount. Snap in place.

11. To remove trim ring, insert small, flat screwdriver tip into one of three slots on outer edge and pry off.

Figure 13

6

NOTES

NILES AUDIO CORPORATION – 1-800-BUY-HIFI

 

7

 

LIMITED WARRANTY

Niles Audio Corporation (“NILES”) warrants its passive products (those not requiring AC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of ten years from date of purchase.

Niles Audio Corporation (“NILES”) warrants its passive loudspeaker products (those not requiring AC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of five years from date of purchase.

Niles Audio Corporation (“NILES”) warrants its outdoor loudspeaker products to the original purchaser to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase.

NilesAudio Corporation (“NILES”) warrants its active products (those requiringAC or battery power) to the original purchaser to be free of manufacturing defects in material and workmanship for a period of two years from date of purchase.

This Warranty is subject to the following additional conditions and limitations. The Warranty is void and inapplicable if NILES deems that the product has been used or handled other than in accordance with the instructions provided by the manufacturer, including but not limited to damage caused by accident, mishandling, improper installation, abuse, negligence, or normal wear and tear, or any defect caused by repair to the product by anyone other than NILES or an authorized NILES dealer.

To obtain warranty service, take the unit to the nearest authorized NILES dealer, who will test the product and if necessary, forward it to NILES for service. If there are no authorized NILES dealers in your area, you must write to NILES and include your name, model and serial number of your unit, along with a brief description of the problem. A factory Return Authorization Number will be sent to you. DO NOT RETURN ANY UNIT WITHOUT FIRST RECEIVING WRITTEN AUTHORIZATION AND SHIPPING INSTRUCTIONS FROM NILES.

If the above conditions are met, the purchaser’s sole remedy shall be to return the product to NILES, in which case NILES will repair or replace, at its sole option, the defective product without charge for parts or labor. NILES will return a unit repaired or replaced under warranty by shipping same by its usual shipping method from the factory (only) at its expense within the United States of America. THERE ARE NO OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION, EITHER EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PRODUCT.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER/ PURCHASER. NILES SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES EXCEPT TO THE EXTENT PROVIDED (OR PROHIBITED) BY APPLICABLE LAW.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the name of your nearest authorized NILES dealer, contact:

NILES AUDIO CORPORATION, P.O. BOX 160818, Miami, Florida 33116.

Please fill in your product information and retain for your records.

Model______________________ Serial No.___________________ Purchase Date_______

8