New Holland Discbine®
Disc Mower-Conditioner Specifications
H7220 H7320 H7230 H7330
MODEL |
H7220 |
H7320 |
H7230 |
H7330 |
MOWMAX™ CUTTERBAR WITH SHOCKPRO™ HUBS |
|
|
|
|
Number of discs |
7 |
7 |
8 |
8 |
Number of knives |
14 (2 per disc) |
14 (2 per disc) |
16 (2 per disc) |
16 (2 per disc) |
Speed, rpm |
3000 |
3000 |
3000 |
3000 |
Cutting width, ft. in. (mm) |
9' 2" (2800) |
9' 2" (2800) |
10' 4" (3160) |
10' 4" (3160) |
Cutting angle |
.......2 to 10 degrees, mechanical or hydraulic control....... |
........................2 to 10 degrees hydraulic control ........................... |
||
Cutting height, in. (mm) .......................................................................... |
|
0.95 to 3.2 (24 to 81) with standard skid shoes...................................................................................... |
|
|
Ground clearance with header |
|
|
|
|
fully raised, in. (mm) |
17 (432) |
17 (432) |
18 (457) |
17 (432) |
Flotation..................................................................................................... |
|
.....Vertical and lateral, adjustable springs ............................................................................................. |
|
|
MATERIAL DISCHARGE |
|
|
|
|
Swath, ft. (mm) |
6 (1829) |
6 (1829) |
7 (2134) |
7 (2134) |
Windrow, ft. (mm) |
................Adjustable from 3 to 6 (914 to 1829)................ |
.....................Adjustable from 3 to 7 (914 to 2134) ........................ |
||
HYDRAULICS |
|
|
|
|
Hydraulic swing.................................................................................................... |
|
Standard (double-acting cylinder)................................................................................................. |
|
|
Hydraulic lift ................................................................................ |
Standard (operated by two single-acting cylinders; master/slave)........................................................................ |
|
||
Hydraulic tilt |
.......Optional (operated by single-acting cylinder and....... |
...........Standard (operated by single-acting cylinder and ............... |
||
|
incorporated into the lift system) |
incorporated into the lift system) |
||
CONDITIONER |
|
|
|
|
Type |
Chevron-design intermeshing |
Flail rotor with 90 tapered flails |
Chevron-design intermeshing |
Flail system with 102 tapered |
|
molded rubber rolls |
and optional textured hood liner |
molded rubber rolls |
flails and optional textured |
|
|
|
|
hood liner |
Length, in. (mm) |
90 (2286) |
90 (2286) |
102 (2591) |
102 (2591) |
Diameter, in. (mm) |
10.4 (264) |
22 (560) |
10.4 (264) |
22 (560) |
Drive |
4 HB V-belt and enclosed gears |
4 HB V-belt |
4 HB V-belt and enclosed gears |
4 HB V-belt |
Speed, rpm |
647 |
1016 std. or optional 730 |
635 |
1000 std. or optional 718 |
Conditioner adjustment |
Single crank adjustable roll |
Adjustable rotor hood with |
Single crank adjustable roll |
Adjustable rotor hood with |
|
pressure and two stop bolts to |
replaceable smooth liner |
pressure and two stop bolts to |
replaceable smooth liner |
|
adjust roll gap |
|
adjust roll gap |
|
SPEEDS |
|
|
|
|
Operating, mph (kph) |
0 to 9 (0 to 14.5) |
0 to 9 (0 to 14.5) |
0 to 9 (0 to 14.5) |
0 to 9 (0 to 14.5) |
Transport, mph (kph) |
20 (32) |
20 (32) |
20 (32) |
20 (32) |
TUBELESS AG RIB IMPLEMENT TIRES |
|
|
|
|
Size |
9.5L x 14 6PR |
9.5L x 14 6PR |
11L x 15 6PR |
9.5L x 14 6PR |
Page 1of 4
New Holland Discbine®
Disc Mower-Conditioner Specifications
H7220 H7320 H7230 H7330
MODEL |
H7220 |
|
H7320 |
H7230 |
H7330 |
DIMENSIONS |
|
|
|
|
|
Height, transport, ft. in. (m) |
5' 8" (1.7) |
|
5' 8" (1.7) |
5' 8" (1.7) |
5' 8" (1.7) |
Height, operating, ft. in. (m) |
4' 5" (1.3) |
|
4' 5" (1.3) |
4' 5" (1.3) |
4' 5" (1.3) |
Width, transport, ft. in. (m) |
..............9' 11" |
(3.0) with standard drawbar hitch ............. |
..................11' 3" (3.4) with standard drawbar hitch...................... |
||
Width, operating, ft. in. (m) |
............14' 10" |
(4.52) with standard drawbar hitch ........... |
..................16' 0" (4.6) with standard drawbar hitch...................... |
||
Length, transport, ft. in. (m) |
..............17' 7" |
(5.3) with standard drawbar hitch ............. |
..................17' 7" (5.3) with standard drawbar hitch...................... |
||
Length, operating, ft. in. (m) |
17' 2" (5.2) with standard |
17' 2" (5.2) with standard |
17' 2" (5.2) with standard |
17' 8" (5.4) ) with standard |
|
|
drawbar hitch |
|
drawbar hitch |
drawbar hitch |
drawbar hitch |
Weight, operating lbs. (kg) |
3,690 (1674) |
|
3,740 (1696) |
4,165 (1889) |
4,065 (1844) |
NOTE: Rear curtain up for transport position on flail units. Windrow shields out for field and transport positions on flail and roll units.
DRIVE |
........540 rpm PTO, enclosed gears and four HB belt........ |
......540 or 1000 rpm PTO, enclosed gears and four HB belt.......... |
DRIVE PROTECTION........................................................................................... |
Slip clutch and over-running clutch................................................................................................ |
|
TRACTOR REQUIREMENT |
65 PTO hp (48 kW) or greater with standard |
.............. 80 PTO hp (60 kW) or greater with standard |
|
||
|
ASAE Category II and III drawbar. |
ASAE Category II and III drawbar. |
...................... |
All models require two remote hydraulic valves capable of 1500 psi (10343 kPa), 7-pin SAE J560 connector for transport lights ..................... |
Page 2 of 4