NEC NP-P350W, NP-P420X User Manual

0 (0)

Portable Projector

P420X/P350X/P350W

User’s Manual

Model No.

NP-P420X, NP-P350X, NP-P350W

2nd edition, January 2011

Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc. registered in the U.S. and other countries.

Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

MicroSaver is a registered trademark of Kensington Computer Products Group, a division of ACCO Brands.

Virtual Remote Tool uses WinI2C/DDC library, © Nicomsoft Ltd.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other countries and areas.

Wi-Fi®, Wi-Fi Alliance®, and Wi-Fi Protected Access (WPA, WPA2)® are registered trademarks of the Wi-Fi Alliance.

Blu-ray is a trademark of Blu-ray Disc Association

Crestron, Crestron Control, and Crestron RoomView are trademarks or registered trademarks of Crestron Electronics, Inc.

Other product and company names mentioned in this user’s manual may be the trademarks or registered trademarks of their respective holders.

GPL/LGPL Software Licenses

The product includes software licensed under GNU General Public License (GPL), GNU Lesser General Public License (LGPL), and others.

For more information on each software, see “readme.pdf” inside the “about GPL&LGPL” folder on the supplied CDROM.

NOTES

(1)The contents of this user’s manual may not be reprinted in part or whole without permission.

(2)The contents of this user’s manual are subject to change without notice.

(3)Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us.

(4)Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

Important Information

Safety Cautions

Precautions

Please read this manual carefully before using your NEC projector and keep the manual handy for future reference.

CAUTION

To turn off main power, be sure to remove the plug from power outlet.

The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

CAUTION

TO PREVENT SHOCK, DO NOT OPEN THE CABINET.

THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock.Therefore, it is dangerous to make any kind of contact with any part inside of the unit.

This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided.

The information should be read carefully to avoid problems.

WARNING: TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

DO NOT USETHIS UNIT’S PLUGWITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALLTHE PRONGS CAN BE FULLY INSERTED.

DOC Compliance Notice (for Canada only)

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Machine Noise Information Regulation - 3. GPSGV,

The highest sound pressure level is less than 70 dB (A) in accordance with EN ISO 7779.

CAUTION

Avoid displaying stationary images for a prolonged period of time.

Doing so can result in these images being temporarily sustained on the surface of the LCD panel.

If this should happen, continue to use your projector. The static background from previous images will disappear.

Disposing of your used product

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.This includes projectors and their electrical accessories or lamps. When you dispose of such products, please

follow the guidance of your local authority and/or ask the shop where you purchased the product. After collecting the used products, they are reused and recycled in a proper way. This effort will help us reduce the wastes as well as the negative impact such as mercury contained in a lamp to the human health and the environment at the minimum level.

The mark on the electrical and electronic products only applies to the current European Union Member States.

i

Important Information

WARNING TO CALIFORNIA RESIDENTS:

Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING.

RF Interference (for USA only)

WARNING

The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

For UK only: In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier.

Important Safeguards

These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings.

Installation

Do not place the projector in the following conditions:

-on an unstable cart, stand, or table.

-near water, baths, or damp rooms.

-in direct sunlight, near heaters, or heat radiating appliances.

-in a dusty, smoky or steamy environment.

-on a sheet of paper or cloth, rugs or carpets.

If you wish to have the projector installed on the ceiling:

-Do not attempt to install the projector yourself.

-The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

-In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes.

-Please consult your dealer for more information.

ii

Important Information

WARNING

Do not use any other object than the projector’s sliding lens cover to cover the lens while the projector is on.

Doing so can cause the object to get extremely hot, and possibly resulting in a fire or damage due to the heat emitted from the light output.

Place the projector in a horizontal position

The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically.

10°

Fire and Shock Precautions

Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.

Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off. Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the AC power supply is disconnected during normal projector operation.

Use caution when picking up the projector.

Prevent foreign objects such as paper clips and bits of paper from falling into your projector.Do not attempt to retrieve any objects that might fall into your projector. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified service personnel.

Do not place any objects on top of the projector.

Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

The projector is designed to operate on a power supply of 100-240V AC 50/60 Hz. Ensure that your power supply fits this requirement before attempting to use your projector.

Do not look into the lens while the projector is on. Serious damage to your eyes could result.

Keep any items (magnifying glass etc.) out of the light path of the projector.The light path being projected from the lens is extensive, therefore any kind of abnormal objects that can redirect light coming out of the lens, can cause an unpredictable outcome such as a fire or injury to the eyes.

iii

Important Information

Do not place any objects, which are easily affected by heat, in front of a projector exhaust vent.

Doing so could lead to the object melting or getting your hands burned from the heat that is emitted from the exhaust.

Handle the power cord carefully. A damaged or frayed power cord can cause electric shock or fire.

-Do not use any power cord other than the one supplied with the projector.

-Do not bend or tug the power cord excessively.

-Do not place the power cord under the projector, or any heavy object.

-Do not cover the power cord with other soft materials such as rugs.

-Do not heat the power cord.

-Do not handle the power plug with wet hands.

Turn off the projector, unplug the power cord and have the projector serviced by a qualified service personnel under the following conditions:

-When the power cord or plug is damaged or frayed.

-If liquid has been spilled into the projector, or if it has been exposed to rain or water.

-If the projector does not operate normally when you follow the instructions described in this user’s manual.

-If the projector has been dropped or the cabinet has been damaged.

-If the projector exhibits a distinct change in performance, indicating a need for service.

Disconnect the power cord and any other cables before carrying the projector.

Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.

Turn off the projector and unplug the power cord if the projector is not to be used for an extended period of time.

When using a LAN cable (only models with the RJ-45 LAN port):

For safety, do not connect to the connector for peripheral device wiring that might have excessive voltage.

CAUTION

Do not use the tilt-foot for purposes other than originally intended. Misuses such as gripping the tilt-foot or hanging on the wall can cause damage to the projector.

Do not send the projector in the soft case by parcel delivery service or cargo shipment.The projector inside the soft case could be damaged.

Select [HIGH] in Fan mode if you continue to use the projector for consecutive days. (From the menu, select [SETUP] → [OPTIONS(1)] → [FAN MODE] → [HIGH].)

Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on and immediately after the projector is turned off.

Do not turn off the AC power for 60 seconds after the lamp is turned on and while the POWER indicator is blinking blue. Doing so could cause premature lamp failure.

Remote Control Precautions

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into fire.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

iv

Important Information

Note for US Residents

The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws.

Lamp Replacement

Use the specified lamp for safety and performance.

To replace the lamp, follow all instructions provided on page 147.

Be sure to replace the lamp and filter when the message [THE LAMP HAS REACHEDTHE END OF ITS USABLE LIFE. PLEASE REPLACE THE LAMP AND FILTER.] appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your dealer for lamp replacement.

A Lamp Characteristic

The projector has a high-pressure mercury lamp as a light source.

A lamp has a characteristic that its brightness gradually decreases with age. Also repeatedly turning the lamp on and off will increase the possibility of its lower brightness.

CAUTION:

DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling.

When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out.

About High Altitude mode

Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher.

Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.

Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker. Switch [FAN MODE] to [AUTO].

Using the projector at altitudes approximately 5500 feet/1600 meters or higher can shorten the life of optical components such as the lamp.

About Copyright of original projected pictures:

Please note that using this projector for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with the following functions may raise concern about the infringement of copyrights which are protected by copyright law.

[ASPECT RATIO], [KEYSTONE], Magnifying feature and other similar features.

Turkish RoHS information relevant for Turkish market

EEE Yönetmeliğine Uygundur.

This device is not intended for use in the direct field of view at visual display workplaces.To avoid incommoding reflections at visual display workplaces this device must not be placed in the direct field of view.

v

NEC NP-P350W, NP-P420X User Manual

Important Information

Information on Wireless LAN:

In some areas and countries, the P420X, P350X, and P350W series projectors come standard with the USB Wireless LAN Unit. If you purchase the projector model without the Wireless LAN Unit, the optional Wireless LAN Unit must be installed to use the projector via a wireless connection.

Note that use in other than supported countries and areas may violate radio wave laws of the country where a wireless LAN unit is used. Use the wireless LAN Unit according to the combinations of the product names and supported countries listed on page viii.

Certificate marks and codes of the NP02LM Series (English)

NP02LM1

Mexico

CFT ID: RCPNENP10-0740

 

Brazil

 

 

NP02LM2

Argentina

CNC ID: C-8400

 

Australia

 

 

 

New Zealand

N56

 

 

Hong Kong

 

 

 

 

HK0011000150

 

Vietnam

 

 

 

 

 

FPT Distribution Co, Ltd.

 

 

A0557240610AE01A2

A0557-240610

 

 

 

 

Indonesia

 

 

 

 

15809/POSTEL/2010

 

South Africa

 

 

 

India

730/2010/WRLO

 

Singapore

Complies with

 

 

IDA Standards

 

 

DB00901

 

 

UAE

TRA

 

 

 

 

 

 

REGISTERED

No:

 

 

ER0042849/10

 

 

 

DEALER

No:

 

 

DA0038690/10

 

 

Pakistan

 

 

 

South Korea

 

 

 

 

: NDS-NP02LM

 

 

vi

 

 

Important Information

 

 

English

Hereby, NEC Display Solutions, Ltd. declares that this Wireless LAN Unit (Model: NP02LM)

 

is in compliance with the essential requirements and other relevant provisions of Directive

 

1999/5/EC.

 

 

Finnish

NEC Display Solutions, Ltd. vakuuttaa täten että Wireless LAN Unit (Model: NP02LM) tyyp-

 

pinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden

 

ehtojen mukainen.

 

 

German

Hiermit erklärt NEC Display Solutions, Ltd., dass sich dieser/diese/dieses Wireless LAN Unit

 

(Model:NP02LM) in Übereinstimmung mit den grundlegenden Anforderungen und den anderen

 

relevanten Vorschriften der Richtlinie 1999/5/EG befindet”. (BMWi)

 

 

 

Hiermit erklärt NEC Display Solutions, Ltd. die Übereinstimmung des Gerätes Wireless LAN

 

Unit (Model: NP02LM) mit den grundlegenden Anforderungen und den anderen relevanten

 

Festlegungen der Richtlinie 1999/5/EG. (Wien)

 

 

French

Par la presente NEC Display Solutions, Ltd. declare que l’appareil Wireless LAN Unit (Model:

 

NP02LM) est conforme aux exigences essentielles et aux autres dispositions pertinentes de

 

la directive 1999/5/CE.

 

 

 

Par la presente, NEC Display Solutions, Ltd. declare que ce Wireless LAN Unit (Model:

 

NP02LM) est conforme aux exigences essentielles et aux autres dispositions de la directive

 

1999/5/CE qui lui sont applicables.

 

 

Italian

Con la presente NEC Display Solutions, Ltd. dichiara che questo Wireless LAN Unit (Model:

 

NP02LM) è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla

 

direttiva 1999/5/CE.

 

 

Spanish

Por medio de la presente NEC Display Solutions, Ltd.declara que elWireless LAN Unit (Model:

 

NP02LM) cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables

 

o exigibles de la Directiva 1999/5/CE.

 

 

Portuguese

NEC Display Solutions, Ltd. declara que este Wireless LAN Unit (Model: NP02LM) está con-

 

forme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.

 

 

Swedish

Härmed intygar NEC Display Solutions, Ltd. att denna Wireless LAN Unit (Model: NP02LM)

 

står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser

 

som framgår av direktiv 1999/5/EG.

 

 

Dutch

Hierbij verklaart NEC Display Solutions, Ltd. dat het toestel Wireless LAN Unit (Model:

 

NP02LM) in overeenstemming is met de essentiële eisen en de andere relevante bepalingen

 

van richtlijn 1999/5/EG.

 

 

 

Bij deze verklaart NEC Display Solutions, Ltd. dat deze Wireless LAN Unit (Model: NP02LM)

 

voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/

 

EC.

 

 

Danish

Undertegnede NEC Display Solutions, Ltd. erklærer herved, at følgende udstyr Wireless

 

LAN Unit (Model: NP02LM) overholder de væsentlige krav og øvrige relevante krav i direktiv

 

1999/5/EF.

 

 

Greek

ΜΕ ΤΗΝ ΠΑΡOΥΣΑ NEC Display Solutions, Ltd. ΔΗΛΩΝΕΙ OΤΙ Wireless LAN Unit (Model:

 

NP02LM) ΣΥΜΜOΡΦΩΝΕΤΑΙ ΠΡOΣ ΤΙΣ OΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛOΙΠΕΣ ΣXΕΤΙΚΕΣ

 

ΔΙΑΤΑΞΕΙΣ ΤΗΣ OΔΗΓΙΑΣ 1999/5/ΕΚ.

 

 

vii

Important Information

Table of Supported Areas and Countries

Note that use with other than the combinations of the product names and supported countries and areas listed below may violate radio wave laws of the country where the device is used.

Product Name

Supported countries and areas

 

 

NP02LM1

Brazil / Canada / Colombia / Mexico / Taiwan / United States

 

 

NP02LM2

Argentina / Australia / Austria / Belgium / Bulgaria / Chile / China / Cyprus / Czech / Denmark

 

/ Ecuador / Egypt / Estonia / Finland / France / Germany / Greece / Hong Kong / Hungary /

 

Iceland / India / Indonesia / Ireland / Israel / Italy / Japan / Latvia / Liechtenstein / Lithuania /

 

Luxembourg / Malaysia / Malta / New Zealand / Norway / Oman / Pakistan / Peru / Philippines

 

/ Poland / Portugal / Romania / Saudi Arabia / Singapore / Slovak / Slovenia / South Africa /

 

South Korea / Spain / Sri Lanka / Sweden / Switzerland / Thailand / The Netherlands / Turkey

 

/ Ukraine / United Arab Emirates / United Kingdom / Vietnam

 

 

NP02LM3

Russia

 

 

Cautions

• Cautions on Usage

Warning

The Wireless LAN Unit is not meant for use with facilities or equipment involving the safeguard of human life, such as medical equipment, nuclear facilities or equipment, aeronautical or space equipment, transportation facilities or equipment, etc., or with facilities or equipment requiring high levels of reliability. Do not use the Wireless LAN Unit in such cases.

Do not use the Wireless LAN Unit near cardiac pacemakers.

Do not use the Wireless LAN Unit near medical equipment. Doing so may cause electromagnetic interference with the medical equipment, possible leading to death.

Do not disassemble or modify the Wireless LAN Unit in any way. Doing so could lead to fire or electric shock.

Do not use the Wireless LAN Unit in wet or moist places, such as in bathrooms or near humidifiers. Doing so could lead to fire, electric shock or malfunction.

Caution

To prevent damage due to static electricity, eliminate any static electricity from your body before touching the Wireless LAN Unit.

Static electricity from the human body may damage the Wireless LAN Unit. Before touching the Wireless LAN Unit, touch an aluminum sash, a door knob, or some other metal object around you to eliminate the static electricity.

Caution

The radio waves used by the Wireless LAN Unit pass through the wood or glass used in normal homes (but not through window panes with built-in metallic mesh).

The radio waves do not pass through iron reinforcing bars, metal or concrete, however, so the Wireless LAN Unit cannot be used for communicating through walls or floors made with these materials.

viii

Important Information

• FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Personal Computer and Peripheral, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested to comply with the limits for a Class B personal computer and periph-eral, pursuant to Subpart B of Part 15 of FCC Rules.Only peripherals (computer input/output devices, terminals, printers, etc.) certified (DoC) or verified to comply with Class B limits may be attached to this equipment. Operation with non-certified (DoC) or non-verified personal computer and/or peripherals is likely to result in Interference to radio and TV reception.

The connection of a unshielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which Exceed the limits established by FCC for equipment.

You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Regulatory Information/Disclaimers

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines.

IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.

CAUTION

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 7.87"/20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

This Class B digital apparatus complies with Canadian RSS-210.

Cet appareil numerique de la Classe B est conforme a la norme CNR-210 du Canada.

Industry Canada Statement

This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:

1)this device may not cause interference and

2)this device must accept any interference, including interference that may cause undesired operation of the device

ix

Important Information

Regulatory Statement:

Operation of this device is subjected to the following National regulations and may be prohibited to use if certain restriction should be applied.

France:

Outdoor use limited to 10mW e.i.r.p.within the band 2454 – 2483.5 MHz.Derogation in French overseas departments of Guyane and La Reunion: outdoor use not allowed in band 2400 - 2420 MHz.

• Cautions on security when using wireless LAN products

With a wireless LAN, radio waves are used instead of LAN cables for the exchange of data between the wireless access points (computers, etc.), offering the advantage that LAN connections can be made freely within the range of the radio waves.

On the other hand, the radio waves reach all points within this range, regardless of walls or other obstacles, possibly resulting in the problems described below if the proper security measures are not taken.

Contents of transmissions may be intercepted

Malicious third parties may purposely intercept the radio waves and steal information contained in the transmissions, including such personal information as ID numbers, passwords, credit card numbers, e-mail messages, etc.

Improper intrusions

Malicious third parties may without permission access the personal or company network and steal personal or confidential information, pretend to be someone else and leak incorrect information, rewrite information that has been intercepted, introduce computer viruses or otherwise damage data or the system, etc.

Wireless LAN cards and wireless access points generally include security measures for dealing with these problems. Making the proper security settings before using the products can reduce the risk of such problems arising.

We recommend that you fully understand the problems that can arise when using the products without making the security settings, then that you make the security settings based on your own decision and at your own discretion.

x

Important Information

Specifications

(1) Specifications common to the NP02LM series

Operating Voltage

5V (power supplied from the projector)

 

 

 

 

MAX Amps

460 mA

 

 

 

 

Wireless Standard

IEEE802.11b / IEEE802.11g / IEEE802.11n

 

 

 

Modulation Method

CCK / DQPSK / DBPSK / OFDM / DS-SS

 

 

 

 

LED Display

During communication: blinking

 

(Green)

Standby: slow blinking

 

 

No operation: light off

 

 

 

 

Interface

USB 2.0 (connected to USB wireless LAN port on the projector)

 

 

 

 

Dimensions

Width: 1.1" / 28 mm

 

 

Height: 0.43" / 11 mm

 

 

Length: 3.03" / 81 mm (including the cap)

 

 

 

Weight

0.049 lbs / 22 g (including the cap)

 

 

 

 

Environmental

Operational Temperatures :

 

Considerations

41° to 104°F / 5° to 40°C, 20% to 80% humidity

 

(non-condensing)

 

 

Storage Temperatures :

 

 

14° to 122°F (-10° to 50°C), 20% to 80% humidity

 

(non-condensing)

 

 

 

 

 

(2) Compliant standards according to model

 

NP02LM1

 

 

 

 

 

 

 

IEEE802.11b

Center Frequency Range/

 

2412 to 2462 MHz

 

Operating channels

 

1 to 11 channels

 

 

 

 

 

Transmission method

 

DS-SS method (direct dispersion spectrum dispersion

 

 

 

method)

 

 

 

 

 

Data Rates

 

11/5.5/2/1 Mbps

 

 

 

 

IEEE802.11g

Center Frequency Range/

 

2412 to 2462 MHz

 

Operating channels

 

1 to 11 channels

 

 

 

 

 

Transmission method

 

OFDM method (Orthogonal Frequency Division Multiplex-

 

 

 

ing method)

 

 

 

 

 

Data Rates

 

54/48/36/24/18/12/9/6 Mbps

 

 

 

 

IEEE802.11n

Center Frequency Range/

 

2412 to 2462 MHz

 

Operating channels

 

1 to 11 channels

 

 

 

 

 

Transmission method

 

OFDM method (Orthogonal Frequency Division Multiplex-

 

 

 

ing method)/

 

 

 

MIMO method (Multiple-Input

 

 

 

Multiple-Output method)

 

 

 

 

 

Data Rates*

 

When dual channel communication is disabled

 

 

 

130/117/104/78/52/39/26/19.5/13 Mbps

 

 

 

When dual channel communication is enabled

 

 

 

300/270/243/216/162/108/81/54/40.5/27/13.5 Mbps

 

 

 

 

xi

 

 

Important Information

NP02LM2

 

 

 

 

 

IEEE802.11b

Center Frequency Range/

2412 to 2472 MHz

 

Operating channels

1 to 13 channels

 

 

 

 

Transmission method

DS-SS method (direct dispersion spectrum dispersion

 

 

method)

 

 

 

 

Data Rates

11/5.5/2/1 Mbps

 

 

 

IEEE802.11g

Center Frequency Range/

2412 to 2472 MHz

 

Operating channels

1 to 13 channels

 

 

 

 

Transmission method

OFDM method (Orthogonal Frequency Division Multiplex-

 

 

ing method)

 

 

 

 

Data Rates

54/48/36/24/18/12/9/6 Mbps

 

 

 

IEEE802.11n

Center Frequency Range/

2412 to 2472 MHz

 

Operating channels

1 to 13 channels

 

 

 

 

Transmission method

OFDM method (Orthogonal Frequency Division Multiplex-

 

 

ing method)/

 

 

MIMO method (Multiple-Input

 

 

Multiple-Output method)

 

 

 

 

Data Rates*

When dual channel communication is disabled

 

 

130/117/104/78/52/39/26/19.5/13 Mbps

 

 

When dual channel communication is enabled

 

 

300/270/243/216/162/108/81/54/40.5/27/13.5 Mbps

 

 

 

NP02LM3

 

 

 

 

 

IEEE802.11b

Center Frequency Range/

2412 to 2472 MHz

 

Operating channels

1 to 13 channels

 

 

 

 

Transmission method

DS-SS method (direct dispersion spectrum dispersion

 

 

method)

 

 

 

 

Data Rates

11/5.5/2/1 Mbps

 

 

 

IEEE802.11g

Center Frequency Range/

2412 to 2472 MHz

 

Operating channels

1 to 13 channels

 

 

 

 

Transmission method

OFDM method (Orthogonal Frequency Division Multiplex-

 

 

ing method)

 

 

 

 

Data Rates

54/48/36/24/18/12/9/6 Mbps

 

 

 

IEEE802.11n

Center Frequency Range/

Not available

 

Operating channels

 

 

 

 

 

Transmission method

Not available

 

 

 

 

Data Rates

Not available

 

 

 

*Dual channel communication will be automatically switched between "enabled" and "disabled" according to the usage environment.

變更原設計之特性及功能。

業、科學及醫療用電波輻射性電機設備之干擾。

xii

Table of Contents

Important Information............................................................................................

i

1. Introduction...........................................................................................................

1

1 What’s in the Box?..........................................................................................................

1

Introduction to the Projector...........................................................................................

2

Congratulations on Your Purchase of the Projector..................................................

2

Features you’ll enjoy:................................................................................................

2

About this user’s manual..........................................................................................

3

Part Names of the Projector...........................................................................................

4

Front/Top...................................................................................................................

4

Rear..........................................................................................................................

5

Top Features.............................................................................................................

6

Terminal Panel Features...........................................................................................

7

Part Names of the Remote Control................................................................................

8

Battery Installation....................................................................................................

9

Remote Control Precautions....................................................................................

9

Operating Range for Wireless Remote Control........................................................

9

Operating Environment for Software Included on CD-ROM.........................................

10

Operating Environment...........................................................................................

11

2. Projecting an Image (Basic Operation)...............................................

12

Flow of Projecting an Image.........................................................................................

12

Connecting Your Computer/Connecting the Power Cord.............................................

13

Turning on the Projector...............................................................................................

14

Note on Startup screen (Menu Language Select screen)......................................

15

Selecting a Source.......................................................................................................

16

Selecting the computer or video source.................................................................

16

Adjusting the Picture Size and Position........................................................................

17

Adjusting the vertical position of a projected image (Lens shift).............................

18

Focus......................................................................................................................

19

Zoom......................................................................................................................

20

Adjust the Tilt Foot..................................................................................................

21

Correcting Keystone Distortion Manually.....................................................................

22

Adjusting with buttons on the cabinet.....................................................................

22

Adjusting with the remote control...........................................................................

23

Optimizing Computer Signal Automatically..................................................................

24

Adjusting the Image Using Auto Adjust..................................................................

24

Turning Up or Down Volume.........................................................................................

24

Turning off the Projector...............................................................................................

25

After Use......................................................................................................................

26

3. Convenient Features......................................................................................

27

1 Turning off the Image and Sound.................................................................................

27

2 Freezing a Picture........................................................................................................

27

Enlarging a Picture.......................................................................................................

27

Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO

 

MODE]....................................................................................................................

28

xiii

Table of Contents

Checking Energy-Saving Effect [CARBON METER]..............................................

29

5 Preventing the Unauthorized Use of the Projector [SECURITY]..................................

30

Operating Your Computer’s Mouse Functions from the Projector’s Remote Control

 

via the USB Cable (Remote Mouse Function)........................................................

33

Projecting Your Computer’s Screen Image from the Projector via the USB Cable

 

(USB Display).........................................................................................................

34

Controlling the Projector by Using an HTTP Browser..................................................

36

Projecting Your Computer’s Screen Image from the Projector via a Network

 

[NETWORK PROJECTOR]....................................................................................

43

Using the Projector to Operate Your Computer via a Network [REMOTE

 

DESKTOP].............................................................................................................

47

4. Using the Viewer..............................................................................................

52

What you can do with the Viewer.................................................................................

52

Preparing presentation materials.................................................................................

55

Projecting images stored in a USB memory device.....................................................

56

Starting the Viewer.................................................................................................

56

Exiting the Viewer...................................................................................................

59

Names and functions of Viewer screen..................................................................

60

Viewer option settings............................................................................................

65

Projecting data from shared folder...............................................................................

68

Connecting the projector to the shared folder .......................................................

68

Disconnecting the shared folder from the projector................................................

71

Projecting data from media server...............................................................................

72

Setting up “Media Sharing” in Windows Media Player 11.......................................

72

Setting up “Media Sharing” in Windows Media Player 12.......................................

74

Connecting the projector to the media server.........................................................

75

Disconnecting the projector from the media server................................................

76

Restrictions on displaying files.....................................................................................

77

Some restrictions on PowerPoint files....................................................................

77

Some restrictions on PDF files...............................................................................

77

5. Using On-Screen Menu................................................................................

78

Using the Menus..........................................................................................................

78

2 Menu Elements............................................................................................................

79

3 List of Menu Items........................................................................................................

80

4 Menu Descriptions & Functions [SOURCE].................................................................

82

COMPUTER 1 and 2..............................................................................................

82

HDMI......................................................................................................................

82

VIDEO....................................................................................................................

82

S-VIDEO.................................................................................................................

82

VIEWER.................................................................................................................

82

NETWORK.............................................................................................................

82

USB DISPLAY........................................................................................................

82

5 Menu Descriptions & Functions [ADJUST]..................................................................

83

[PICTURE]..............................................................................................................

83

[IMAGE OPTIONS].................................................................................................

86

[AUDIO]..................................................................................................................

90

xiv

Table of Contents

6 Menu Descriptions & Functions [SETUP]....................................................................

91

[GENERAL]............................................................................................................

91

[MENU]...................................................................................................................

93

[INSTALLATION].....................................................................................................

95

[OPTIONS(1)].........................................................................................................

97

[OPTIONS(2)].........................................................................................................

99

7 Menu Descriptions & Functions [INFO.].....................................................................

101

[USAGE TIME]......................................................................................................

101

[SOURCE]............................................................................................................

102

[WIRED LAN]........................................................................................................

102

[WIRELESS LAN].................................................................................................

102

[VERSION(1)].......................................................................................................

103

[VERSION(2)].......................................................................................................

103

[OTHERS].............................................................................................................

103

8 Menu Descriptions & Functions [RESET]..................................................................

104

Returning to Factory Default [RESET]..................................................................

104

Application Menu........................................................................................................

105

IMAGE EXPRESS UTILITY..................................................................................

105

DESKTOP CONTROL UTILITY............................................................................

105

NETWORK PROJECTOR....................................................................................

106

REMOTE DESKTOP CONNECTION...................................................................

106

NETWORK SETTINGS........................................................................................

107

TOOLS.................................................................................................................

123

6. Installation and Connections..................................................................

128

Setting Up the Screen and the Projector....................................................................

128

Selecting a Location.............................................................................................

128

Throw Distance and Screen Size.........................................................................

130

Making Connections...................................................................................................

132

Connecting Your Computer...................................................................................

132

Connecting an External Monitor...........................................................................

134

Connecting Your DVD Player or Other AV Equipment..........................................

135

Connecting Component Input...............................................................................

136

Connecting HDMI Input........................................................................................

137

Connecting to a Wired LAN..................................................................................

138

Connecting to a Wireless LAN (NP02LM series)..................................................

139

Attaching the Optional Cable Cover (NP01CV)....................................................

142

7. Maintenance.....................................................................................................

143

Cleaning the Filters....................................................................................................

143

2 Cleaning the Lens......................................................................................................

146

3 Cleaning the Cabinet..................................................................................................

146

4 Replacing the Lamp and the Filters...........................................................................

147

8. User Supportware..........................................................................................

152

Installing Software Program.......................................................................................

152

Installation for Windows software.........................................................................

152

Installation for Macintosh software.......................................................................

154

Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)....

155

xv

Table of Contents

Projecting Your Computer’s Screen Image from the Projector over a LAN (Image

 

Express Utility Lite)...............................................................................................

160

Projecting an Image from an Angle (Geometric Correction Tool in Image Express

 

Utility Lite).............................................................................................................

163

What you can do with GCT...................................................................................

163

Projecting an Image from an Angle (GCT)...........................................................

163

Projecting Images or Videos from the Projector over a LAN (Image Express Utility

 

2.0).......................................................................................................................

165

What you can do with Image Express Utility 2.0..................................................

165

Connecting the projector to a LAN.......................................................................

166

Basic Operation of Image Express Utility 2.0.......................................................

167

Using the Projector to Operate Your Computer over a LAN (Desktop Control Utility

 

1.0).......................................................................................................................

176

What you can do with Desktop Control Utility 1.0.................................................

176

Connecting the projector to a LAN.......................................................................

176

Using the projector to operate your computer’s desktop screen..........................

177

Controlling the Projector over a LAN (PC Control Utility Pro 4).................................

185

Converting PowerPoint files to Slides (Viewer PPT Converter 3.0)............................

186

Projecting Your Mac’s Screen Image from the Projector over a LAN (Image

 

Express Utility 2 for Mac)......................................................................................

188

What you can do with Image Express Utility 2.....................................................

188

Operating environment.........................................................................................

188

Connecting the projector to a LAN.......................................................................

188

Using Image Express Utility 2...............................................................................

189

9. Appendix.............................................................................................................

192

Troubleshooting..........................................................................................................

192

Indicator Messages..............................................................................................

192

Common Problems & Solutions............................................................................

193

If there is no picture, or the picture is not displayed correctly...............................

194

Specifications.............................................................................................................

195

Cabinet Dimensions...................................................................................................

197

4 Pin Assignments of D-Sub COMPUTER Input Connector.........................................

198

5 Compatible Input Signal List......................................................................................

199

6 PC Control Codes and Cable Connection..................................................................

200

7 Troubleshooting Check List........................................................................................

201

8 TravelCare Guide........................................................................................................

203

xvi

1. Introduction

1 What’s in the Box?

Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector.

Projector

Remote control

Batteries (AAA × 2)

(7N900922)

 

Power cord

Computer cable (VGA)

(US: 7N080236)

(7N520073)

(EU: 7N080022)

 

Important Infomation (For North America:

7N8N1261) (For Other countries than North America: 7N8N1261 and 7N8N1271)

Quick Setup Guide (For North America:

7N8N1281) (For Other countries than North

America: 7N8N1281 and 7N8N1291)

NEC Projector CD-ROM

User’s manual (PDF) and the utility software

(7N951551)

For North America only

Registration card Limited warranty

For customers in Europe:

Youwillfind ourcurrentvalidGuarantee Policy on our Web Site: www.nec-display-solutions.com

In some areas and countries, the projector comes standard with the USB Wireless LAN Unit. If you purchase the projector model without the Wireless LAN Unit, the optionalWireless LAN Unit must be installed to use the projector via a wireless connection.

Unless otherwise described in the user’s manual, the drawings for the projector cabinet show examples of the P420X.

1

1. Introduction

Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.

Congratulations on Your Purchase of the Projector

This projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches across (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player, or document camera.

You can use the projector on a tabletop or cart, you can use the projector to project images from behind the screen, and the projector can be permanently mounted on a ceiling*1.The remote control can be used wirelessly.

*1 Do not attempt to mount the projector on a ceiling yourself.

The projector must be installed by qualified technicians in order to ensure proper operation and reduce the risk of bodily injury.

In addition, the ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. Please consult your dealer for more information.

Features you’ll enjoy:

Quick start (3 seconds*1), Quick Power Off (0 seconds), Direct Power Off

3 seconds*1 after turning on the power, the projector is ready to display PC or video images.

The projector can be put away immediately after the projector is powered down. No cool down period is required after the projector is turned off from the remote control or cabinet control panel.

The projector has a feature called “Direct Power Off”.This feature allows the projector to be turned off (even when projecting an image) by using the Main Power Switch or disconnecting the AC power supply.

To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker.

*1 The quick start time is only when [STANDBY MODE] is set to [NORMAL] in the on-screen message.

0.2 W (100-130 V AC)/0.4 W (200-240 V AC) in standby condition with energy saving technology

Selecting [POWER-SAVING] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes only 0.2 W (100-130 V AC)/0.4 W (200-240 V AC).

Carbon Meter

This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [AUTO ECO], [ECO1], or [ECO2]*2.

The amount of CO2 emission reduction will be displayed in the confirmation message at the time of power-off and in the INFO of the on-screen menu.

*2 [ECO2] is available on P350X only.

Lamp life up to 5000 hours (P350X)/3500 hours (P420X/P350W) without cleaning the filters regularly

Using in Eco Mode allows you to prolong the projector’s lamp life up to 5000 hours (up to 4000 hours in NORMAL Mode (ECO Mode OFF)).

For P420X and P350W:

Using in Eco Mode allows you to prolong the projector’s lamp life up to 3500 hours (up to 3000 hours in NORMAL Mode (ECO Mode OFF))

The two-layer, large filters require no regular cleaning. Filter replacement is requred only when lamp replacement is done.

Vertical lens shift mechanism offers installation flexibility

Manual lens shift that can be adjusted by turning dials on the top of the projector.

HDMI input port provides digital signal

The HDMI input provides HDCP compatible digital signals.The HDMI input also supports audio signal.

2

1. Introduction

10 W built-in speaker for an integrated audio solution

Powerful 10 watt monaural speaker provides volume need for large rooms.

The supplied remote control allows you to assign a CONTROL ID to the projector

Multiple projectors can be operated separately and independently with the same single remote control by assigning an ID number to each projector.

Vertical keystone correction

Keystone feature allows the projector to correct vertical distortion.

USB Display

Using a commercially available USB cable (compatible with USB 2.0 specifications) to connect the computer with the projector allows you to send your computer screen image to the projector without the need of a traditional computer cable (VGA).

Integrated RJ-45 connector for wired networking capability along with wireless networking capabilities

An RJ-45 connector is standard. A wireless LAN unit is equipped with the projector for models distributed in North America models. An optional wireless LAN unit is available for models for Europe, Australia, Asia and other countries than North America.

Software programs (User Supportware) contained in the supplied CD-ROM

The supplied NEC Projector includes seven programs: Virtual Remote Tool, Image Express Utility Lite, Image Express Utility 2.0, Desktop Control Utility 1.0, PC Control Utility Pro 4, Viewer PPT Converter 3.0, and Image Express Utility 2 for Mac.

LAN-compatible Viewer

The projector’s built-in Viewer allows you to view images or movie files in the shared folder of your PC connected to a wired or wireless LAN.

* The Viewer supports the Media Sharing function of Windows Media Player 11.

AUTO POWER ON and AUTO POWER OFF features

The AUTO POWER ON(AC), AUTO POWER ON(COMP1), AUTO POWER OFF, and OFFTIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet.

Preventing unauthorized use of the projector

Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, and security chain opening to help prevent unauthorized access, adjustments and theft deterrence.

High resolution up to UXGA

High resolution display - up to UXGA compatible, XGA (P420X/P350X)/WXGA (P350W) native resolution.

Crestron RoomView® supported

The projector suppors Crestron RoomView which allows you to control and manage equipment connected to your network from your computer.

About this user’s manual

The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user’s manual. This may save you time later on. At the beginning of each section of the manual you’ll find an overview. If the section doesn’t apply, you can skip it.

3

1. Introduction

Part Names of the Projector

Front/Top

Zoom Lever (page 20)

Focus Lever (page 19)

Ventilation (outlet) Heated air is exhausted from here.

Lens Cover

Adjustable Tilt Foot Lever

(page 21)

Adjustable Tilt Foot

(page 21)

Controls (page 6)

Lens Shift Dial (Vertical) (page 18)

Ventilation (inlet) / Filter Cover

(page 143, 150)

Remote Sensor (page 9)

Lens

4

1. Introduction

Rear

Port Cover for USB Wireless LAN Unit

When using the USB Wireless LAN

Unit, first remove the cover. (page 141)

Monaural Speaker (10 W)

Terminal Panel (page 7)

AC Input Connect the supplied power cord’s three-pin plug here, and plug the other end into an active wall outlet. (page 13)

Cable cover connection (right and left)

Screw holes and grooves for the optional cable cover

* This security slot supports the MicroSaver ® Security System.

Opening and closing the lens cover

Slide the lens cover to the left to uncover the lens.

To cover the lens, slide the lens cover to the right.

Remote Sensor (page 9)

Lamp Cover (page 148)

Built-in Security Slot ( )*

Security chain opening

Attach an anti-theft device.

The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.

Rear Foot (page 21)

NOTE:

The lens cover works in conjunction with the AV mute function. Closing the lens cover will turn off the image and sound during normal projector operation; opening it will restore the image and sound.

With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about 2 hours, it will turn off automatically.

Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause damage to the lens cover sliding mechanism!

5

1. Introduction

Top Features

9

10

8

11

 

5

6

7

3

4

 

1/2

1. (POWER) Button (→ page 14, 25)

2.POWER Indicator (→ page 13, 14, 25, 192)

3.STATUS Indicator (→ page 192)

4.LAMP Indicator (→ page 147, 192)

5.ECO Button (→ page 28)

6.SOURCE Button (→ page 16)

7.AUTO ADJ. Button (→ page 24)

8.MENU Button (→ page 78)

9./ Volume Buttons / Keystone Buttons

(→ page 22, 24)

10.ENTER Button (→ page 78)

11.EXIT Button (→ page 78)

6

1. Introduction

Terminal Panel Features

13

12

6

5

 

4

3

2

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 11 9 7 8 14

1.COMPUTER 1 IN/ Component Input Connector

(Mini D-Sub 15 Pin) (→ page 132, 136, 157)

2.COMPUTER 1 AUDIO IN Mini Jack (Stereo Mini)

(→ page 132, 134, 136)

3.COMPUTER 2 IN / Component Input Connector

(Mini D-Sub 15 Pin) (→ page 132, 136)

4.COMPUTER 2 AUDIO IN Mini Jack (Stereo Mini)

(→ page 132, 134, 136)

5.HDMI IN Connector (Type A)

(→ page 132, 137)

6.USB (PC) Port (Type B)

(→ page 33, 34, 132)

7.MONITOR OUT (COMP. 1) Connector (Mini D-Sub 15 Pin) (→ page 134)

8.AUDIO OUT Mini Jack (Stereo Mini) (→ page 134)

9.S-VIDEO IN Connector (Mini DIN 4 Pin)

(→ page 135)

10.VIDEO IN Connector (RCA) (→ page 135)

11.VIDEO/S-VIDEO AUDIO IN L/MONO, R (RCA)

(→ page 135)

12.LAN Port (RJ-45) (→ page 141)

13.USB Port (Type A) (→ page 59, 180)

14.PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin)

(→ page 200)

Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 200.

7

1. Introduction

Part Names of the Remote Control

1

3

2

7

5

4

6

8

10

9 15 1113

14

12

17

16

18

19

21

20

25

22

27

 

23

24

28

26

29

 

32

30

 

31

11.VIEWER Button (→ page 16, 56)

12.NETWORK Button (→ page 16)

13.USB DISPLAY Button (→ page 16)

14.ID SET Button

(→ page 96)

15.Numeric Keypad Button/CLEAR Button

(→ page 96)

16.FREEZE Button

(→ page 27)

17.AV-MUTE Button

(→ page 27)

18.MENU Button

(→ page 78)

19.EXIT Button (→ page 78)

20.Button (→ page 78)

21.ENTER Button (→ page 78)

22.D-ZOOM (+)(–) Button

(→ page 27)

 

 

23. MOUSE L-CLICK Button*

 

 

(→ page 33)

 

 

24. MOUSE R-CLICK Button*

1.

Infrared Transmitter

(→ page 33)

 

(→ page 9)

25. PAGE / Button*

2.

POWER ON Button

(→ page 33)

 

(→ page 14)

26. ECO Button (→ page 28)

3.

POWER OFF Button

27. KEYSTONE Button

 

(→ page 25)

(→ page 23)

4, 5, 6. COMPUTER 1/2/3 Button

28. PICTURE Button

 

(→ page 16)

(→ page 83, 85)

 

(COMPUTER 3 button is not available.)

29. VOL. (+)(–) Button

7.

AUTO ADJ. Button

(→ page 24)

 

(→ page 24)

30. ASPECT Button

8.

VIDEO Button

(→ page 88)

 

(→ page 16)

31. FOCUS/ZOOM Button

9.

S-VIDEO Button

(not available on this series of projectors)

 

(→ page 16)

32. HELP Button

10. HDMI Button (→ page 16)

(→ page 101)

*The PAGE / , , MOUSE L-CLICK and MOUSE R-CLICK buttons work only when a USB cable is connected with your computer..

8

1. Introduction

Battery Installation

1 Press firmly and slide the battery

2 Install new batteries (AAA).Ensure

cover off.

that you have the batteries’polarity

 

(+/−) aligned correctly.

Remote Control Precautions

3 Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries.

Handle the remote control carefully.

If the remote control gets wet, wipe it dry immediately.

Avoid excessive heat and humidity.

Do not short, heat, or take apart batteries.

Do not throw batteries into fire.

If you will not be using the remote control for a long time, remove the batteries.

Ensure that you have the batteries’ polarity (+/−) aligned correctly.

Do not use new and old batteries together, or use different types of batteries together.

Dispose of used batteries according to your local regulations.

Operating Range for Wireless Remote Control

 

7 m/22 feet

 

 

 

30°

 

 

30°

 

30°

 

Remote control

30°

7 m/22 feet

 

Remote sensor on projector cabinet

 

 

30°

Remote control

30°

30°

 

 

 

30°

 

 

7 m/22 feet

7 m/22 feet

The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle of the remote sensor on the projector cabinet.

The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

9

1. Introduction

Operating Environment for Software Included on CD-ROM

Names and Features of Bundled Software Programs

Name of software program

Features

Virtual Remote Tool

This is a software program used to control the power ON/OFF and source selec-

 

tion of the projector from your computer by using the supplied computer cable

 

(VGA) and it is also used to send an image to the projector and register it as the

 

logo data of the projector. After registering it, you can lock the logo to prevent it

 

from changing. (→ page 155)

Image Express Utility Lite

This is a software program used to project your computer’s screen over the

 

 

USB cable or the wired/wireless network. The computer cable (VGA) is not

 

 

required. (→ page 34, page 160)

 

This software program can be used to control the power ON/OFF and source

 

 

selection of the projector from your computer.

 

• The Geometric CorrectionTool (GCT) function allows you to correct distortion

 

 

of images projected on a curved wall. (→ page 163)

 

 

Image Express Utility 2.0

• This is a software program used to send the screens of your personal comput-

 

 

ers to the projector via wired/wireless LAN (Meeting mode).

 

 

Projected images can be transferred and saved to personal computers.

 

 

When “Meeting Mode” is used, projected images can be sent and saved to

 

 

the personal computers. Images can be sent from a personal computer to

 

 

not only one projector but also to two or more projectors at the same time.

 

 

(→ page 165)

Desktop Control Utility 1.0

• This is a software program used to operate the desktop screen of a personal

 

 

computer at a remote location by using a projector via wired/wireless LAN.

 

 

(→ page 176)

 

 

PC Control Utility Pro 4

This is a software program used to operate the projector from the computer when

 

the computer and the projector are connected with LAN (wired or wireless) or

 

a serial cable. (→ page 185)

 

 

Viewer PPT Converter 3.0

This is a software program used to convert files created with PowerPoint into

 

JPEG files that can be displayed with the viewer function of the projector when

 

a USB memory device is inserted into the projector. (→ page 186)

 

 

Image Express Utility for Mac

• This is a software program used to send the Mac’s screen image to the projec-

 

 

tor over a network (wired or wireless LAN).(→page 188) For Mac’s operating

 

 

environment, see page 188.

 

 

 

NOTE:

Image Express Utility Lite does not support “Meeting Mode” in Image Express Utility 2.0 and Image Express Utility 2 for Mac included with our other models.

Download service

For the update information about these software programs, visit our website:

URL: http://www.nec-display.com/dl/en/index.html

10

1. Introduction

Operating Environment

The following is the operating environment for Image Express Utility Lite. For the operating environment of other software program, refer to the help function of each software program.

Supported OS

Windows 7 Home Basic

 

Windows 7 Home Premium

 

Windows 7 Professional

 

Windows 7 Ultimate

 

Windows 7 Enterprise

 

Windows Vista Home Basic

 

Windows Vista Home Premium

 

Windows Vista Business

 

Windows Vista Ultimate

 

Windows Vista Enterprise

 

Windows XP Home Edition Service Pack 3 or later

 

Windows XP Professional Service Pack 3 or later

 

Only 32-bit version

 

Windows power-saving function is not supported.

 

 

 

Processor

Windows 7/Windows Vista

 

 

Pentium M 1.2 GHz equivalent or higher required

 

 

Dual core 1.5 GHz or higher recommended

 

• Windows XP

 

 

Pentium M 1.0 GHz equivalent or higher required

 

 

Dual core 1.0 GHz or higher recommended

 

 

 

Memory

Windows 7/Windows Vista

 

 

512 MB or more required

 

 

1 GB or more recommended

 

• Windows XP

 

 

256 MB or more required

 

 

512 MB or more recommended

 

 

* More memory may be required to run additional applications simultaneously.

 

 

 

Graphic processor

Windows 7/Windows Vista

 

 

The “Graphics” score 3.0 or more of “Windows Experience Index” recommended.

 

 

Network environment

TCP/IP-compatible wired LAN or wireless LAN

 

(* Use a wireless LAN unit complying with the Wi-Fi standard.)

 

 

 

Resolution

Windows 7/Windows Vista

 

 

SVGA (800 × 600) or higher required

 

 

XGA (1024 × 768) recommended

 

• Windows XP

 

 

VGA (640 × 480) or higher required

 

 

XGA (1024 × 768) recommended

 

1024 dots × 768 lines - 1280 dots × 800 lines recommended (P350W)

 

 

Screen Colors

High Color (15 bits, 16 bits)

 

True Color (24 bits, 32 bits) (recommended)

 

256 or fewer colors are not supported.

 

 

 

11

2. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

Flow of Projecting an Image

Step 1

• Connecting your computer / Connecting the power cord (page 13)

Step 2

• Turning on the projector (page 14)

Step 3

• Selecting a source (page 16)

Step 4

Adjusting the picture size and position (page 17)

Correcting keystone distortion [KEYSTONE] (page 22)

Step 5

Adjusting a picture and sound

-Optimizing a computer signal automatically (page 24)

-Turning up or down volume (page 24)

Step 6

• Making a presentation

Step 7

• Turning off the projector (page 25)

Step 8

• After use (page 26)

12

Loading...
+ 192 hidden pages