Motorola MTM800 User Manual

0 (0)

MTM800

TETRA Mobile Terminal

Basic User Guide

When printed by Motorola

Motorola MTM800 User Manual

1

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

15

13

14

11

12 10

9

8

7

6

17

18

Contents

 

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Disposal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Copyright Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Icon Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

MTM800 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Audio Signal Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Periodic Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Key and Button Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Mode Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Soft Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Menu Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Emergency Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9

The LED Status Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

To Enter the Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

To Exit the Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

List of Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

The Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Display Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Displaying Long Numbers or Messages . . . . . . . . . . . . . .

15

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Powering the MTM800 On/Off (On/Off Button) . . . . . . . . . . . . .

16

Powering On the MTM800 (Ignition Sense) . . . . . . . . . . . . . . .

16

Powering On the MTM800 (Emergency Foot Switch) . . . . . . . .

16

Powering On with Transmit Inhibit Active . . . . . . . . . . . . . . . . .

16

Uninstalling the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Unlocking the MTM800 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Selecting TMO or DMO Operation . . . . . . . . . . . . . . . . . 18

Entering TMO or DMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Calls (Trunked Mode Operation) . . . . . . . . . . . . . . . . . . . . . . . . 18 TMO Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Making a TMO Group Call . . . . . . . . . . . . . . . . . . . . . . . . 18

English

1

English

Receiving a TMO Group Call . . . . . . . . . . . . . . . . . . . . . . 19 Receiving a TMO Broadcast Call . . . . . . . . . . . . . . . . . . . 19 Calls (Direct Mode Operation) . . . . . . . . . . . . . . . . . . . . . . . . . . 19 DMO Group Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Making a DMO Group Call . . . . . . . . . . . . . . . . . . . . . . . . 20 Receiving a DMO Group Call . . . . . . . . . . . . . . . . . . . . . . 20 Exiting DMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Calls (Private and Phone Calls) . . . . . . . . . . . . . . . . . . . 21

Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Making a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Receiving a Private Call . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Phone and PABX Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Making a Phone or PABX Call . . . . . . . . . . . . . . . . . . . . .

22

VOX Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Entering or Exiting Emergency Mode (TMO & DMO) . . . . . . . .

24

Invisible Emergency Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .

24

Sending an Emergency Alarm . . . . . . . . . . . . . . . . . . . . . . . . .

24

Hot Microphone Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

25

Making an Emergency Group Call . . . . . . . . . . . . . . . . . . . . . .

26

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Sending a Status Message . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Sending a New Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Sending a User-defined Message . . . . . . . . . . . . . . . . . . . . . . .

27

Sending a Predefined Message . . . . . . . . . . . . . . . . . . . . . . . .

27

Handling New Incoming Text Messages . . . . . . . . . . . . . . . . . .

27

Handling Old Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

27

Tips & Tricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Quick Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . 29

© Motorola Inc., 2008

MOTOROLA and the stylized M Logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners.

2

Safety Information

Before using these products, read the operating instructions for safe usage contained in the Product Safety and RF Exposure booklet Safety Leaflet 6866537D37.

The accessories are restricted to occupational use only to satisfy ICNIRP RF energy exposure requirements. Before using the products, read the RF energy awareness information and operating instructions in the Product Safety and RF Exposure booklet (Motorola Publication part number Safety Leaflet 6864117B25) to ensure compliance with RF energy exposure limits.

Keep this User Guide and the Product Safety and RF Exposure booklet in a safe place and make it available to other operators in case the accessories are passed on to other people.

Disposal Information

The European Union's Waste of Electrical and Electronic Equipment directive requires that products sold into EU countries must have the crossed out trashbin label on the product (or the package in some cases). As defined by the

WEEE directive, this cross-out trashbin label means that customers and end-users in EU countries should not dispose of electronic and electrical equipment or accessories in household waste.

Customers or end-users in EU countries should contact their local equipment supplier representative or service centre for information about the waste collection system in their country.

Copyright Information

The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other mediums. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, but not limited to, including the exclusive right to copy or reproduce in any form the copyrighted computer program.

English

3

English

Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any licence under the copyrights, patents, or patent applications of Motorola, except for the normal non-exclusive licence to use that arises by operation of the law in the sale of a product.

This document is copyright protected. Duplications for the purpose of the use of Motorola products are permitted to an appropriate extent. Duplications for other purposes, changes, additions or other processing of this document are not permitted. Only this electronically-saved document is considered to be the original. Duplications are considered merely copies. The group companies of Motorola, Inc. do not vouch for the correctness of such kinds of copies.

Icon Conventions

The document set is designed to give the reader more visual cues. The following graphic icons are used throughout the documentation set. These icons and their associated meanings are described below.

The signal word Warning with the associated safety icon implies information that, if disregarded, could result in death or serious injury, or serious product damage.

The signal word Caution with the associated safety icon implies information that, if disregarded, may result in minor or moderate injury, or serious product damage.

The signal word Caution may be used without the safety icon to state potential damage or injury that is not related to the product.

Notes contain information more important than the surrounding text, such as exceptions or preconditions. They also refer the reader elsewhere for additional information, remind the reader how to complete an action (when it’s not part of the current procedure, for instance), or tell the reader where something is located on the screen. There is no warning level associated with a Note.

4

MTM800 Overview

Controls and Indicators

The numbers below refer to the illustration on the inside front cover.

Number

Description

 

 

1

On-Off Key

 

Used to turn the MTM800 On/Off (press and hold).

 

 

2

LED (Indicator)

 

 

4

Alphanumeric Display

 

Provides four lines of 16 characters with backlighting.

 

 

5

Alphanumeric Keypad

 

Use the keypad to enter alphanumeric characters for

 

dialing, address book entries and text messages.

 

 

6

Backlight Key

 

Dims and intensifies the terminal’s backlight.

 

 

7

Programmable Keys 1, 2 and 3.

 

 

8

External Alarm Key

 

Used to activate and deactivate the External Alarm

 

(Horn & Lights).

 

 

9

Send/End Key

 

Used to initiate or answer calls, end calls (not Group

 

mode) or send status and text messages.

 

 

10

Menu Key

 

Used to enter the main menu and scroll the menu

 

options.

 

 

11

Soft Keys

 

Press to select the option that appears directly above

 

the left or right key on the display.

 

 

12

Navigation Keys

 

Press up, down, left or right for list scrolling while

 

moving around the menu hierarchy or for

 

alphanumeric text editing.

 

 

13

Mode-Key

 

Used to change modes.

 

 

14

Emergency Key

 

Used to send Emergency Alarms (press and hold).

 

 

English

5

English

Number

Description

 

 

15Microphone Connector

Provides connection for a fist or desk microphone with PTT button, or the telephone style handset.

16Volume Knob

Adjusts the volume level.

17Push-To-Talk Button (PTT)

Press and hold this button to talk, release it to listen.

18Microphone

Before using your MTM800 for the first time, remove the plastic lens protector from the display.

Audio Signal Tones

= High Tone;

 

 

 

= Low Tone;

 

 

 

 

 

 

 

 

 

 

Description

 

 

 

 

 

Type

Repeated

 

 

 

 

 

 

 

 

 

Idle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Back to Home display

 

 

 

 

 

 

 

Once

• Back to rotary volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

use when rotary scroll

 

 

 

 

 

 

 

 

timer expires

 

 

 

 

 

 

 

 

• Back to coverage

 

 

 

 

 

 

 

 

• Back to full service

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clear-to-send

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bad key press

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Good key press

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

• MTM800 self-test fails at

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power up

 

 

 

 

 

 

 

 

• From out-of-service to

 

 

 

 

 

 

 

 

in-service

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In Call

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Call clear warning

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

Call waiting tone while

 

 

 

 

 

 

 

Every 6 seconds, until

 

 

 

 

 

 

 

Phone or Private Call are

 

 

 

 

 

 

 

a call is terminated.

pending.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Data connected or

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

Data disconnected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

Description

 

 

 

 

 

 

 

Type

Repeated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Talk Permit sounds upon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once (Normal Tone)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing the PTT.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once (Short Tone)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Talk permit without

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Twice

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gateway sounds upon

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pressing PTT. The tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

indicates the gateway is no

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

longer available.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Talk prohibit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Until you release the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System busy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PTT.

• Time-out timer expire

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Called MTM800 not

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

available or busy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Call disconnected or failed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

due to network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Wrong number dialed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DMO (Direct Mode)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Entering

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DMO Exiting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Local site trunking —

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Entering/Exiting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone ring back (sending)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Every three seconds,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

until the called user

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

answers or call is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rejected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone busy

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Every 0.5 seconds

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Status message sent to the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Twice

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dispatcher or failed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Incoming Calls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Status message

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Four times

acknowledged by the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

dispatcher.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Your MTM800 received a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Group Call without

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

gateway (setup only).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

High-priority Group Call

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

7

English

Description

 

 

 

 

 

 

Type

Repeated

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emergency Alarm sent or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Twice

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emergency Alarm failed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Four times

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emergency Call received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Phone ring, full-duplex

 

According to the Ring Style

Until you answer or

Private Call (reception

 

sub-menu setting.

the call is rejected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Private Call received

 

According to the Ring Style

Until you answer or

 

 

sub-menu setting.

the call is rejected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Private Call ringing to the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Until the call is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

caller

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

answered.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Half-duplex Private

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Every 4 seconds, until

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pre-emptive Priority Call

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the call is answered or

(PPC) ring

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rejected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Full-duplex Private PPC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Every 4 seconds, until

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ring

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the call is answered or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

rejected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Limited service

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once, upon entering

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

limited service.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

New mail received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

New Group Call

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

General

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume setting (earpiece,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Continuous

keypad, speaker)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume setting (ringer)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

While setting the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

volume.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transmit Inhibit (TXI)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Periodic Alert

This feature can be disabled/enabled by the user.

Press Menu - 4 Setup - 1 Tones - 5 Periodic Alert also to set the period of time between the indications.

8

Key and Button Overview

Mode Key

The MTM800 has four call modes when operating in Trunked Mode (TMO):

Group mode—to send and receive Group Calls.

Private mode—to send and receive Private Calls.

Phone mode—to send and receive Phone Calls.

PABX mode—to send and receive local (office) extension calls. Group mode is the default mode to which your MTM800 returns when there is no activity for a few seconds.

To cycle through the Group, Private, Phone, and optional PABX modes, press Mode successively.

Soft Keys

Press to select the option that appears in the screen directly above the left or right soft key.

Menu Key

Press Menu to enter the menu. The MTM800 menus allow you to control your MTM800 settings.

Emergency Button

Press and hold from any mode to enter the Emergency mode.

The required time you need to press the Emergency button is set as default to 0.5 seconds. This time may be set, however, by your service provider.

Function Keys
F1 to F3 Keys

These keys support the one-touch feature that allows you to select or activate commonly used features by pressing and holding a single key.

Numeric Keys

The MTM800 supports the one-touch feature that allows you to select or activate commonly used features by pressing and holding a numeric key.

English

9

English

One Touch Private Call

The MTM800 supports the one-touch private call if it is set by the Service Provider. User can dial the last group call originator number via pressing the assigned one touch private call button.

The required time you need to press the Numeric keys to activate a one-touch function is set as default to 1 second. This time may be set, however, by your service provider.

For information on the function assigned to each F1 to F3 or Numeric keys please refer to your Service Provider.

List of Available Characters:

Key

 

 

 

 

Alphanumeric Mode

 

 

1 !

. , ? ! 0 1 @ ' " - ( ) / : _ ; + & % × * = < > € £ $ ¥ ¤ [ ]

{ } \ ~ ^ ¿ ¡ § #

 

 

 

 

2 abc

A B C 2

 

 

a

b

c

2

 

 

 

 

 

 

3 def

D

E

F 3

 

 

d

e

f

3

 

 

 

 

 

 

 

4 ghi

G

H

I

4

 

 

g

h

i

4

 

 

 

 

 

 

 

5 jkl

J

K

L

5

 

 

j

k

l

5

 

 

 

 

6 mno

M N O 6

 

 

m

n o

6

 

 

 

 

7pqrs

P Q R S

7

 

p

q

r

s

7

 

 

 

 

 

8 tuv

T

U

V 8

 

 

t

u

v

8

 

 

 

 

9wxyz

W X Y Z

9

 

w

x

y

z

9

 

 

 

 

 

 

10

Key

 

 

 

Alphanumeric Mode

 

Space

* / %

0

0

+

-

 

 

#

=

<

>

The LED Status Indicator

The LED indicator shows the states of your MTM800.

Indicator

Status

 

 

Solid green

In use

 

 

Flashing green

In service

 

 

Solid red

Out of service

 

 

Flashing red

Connecting to a network/Entering DMO

 

 

Solid orange

Transmit Inhibit (TXI) in service /

 

Channel busy in DMO

 

 

First solid then

Incoming call

flashing orange

 

 

 

No indication

Switched off

 

 

To Enter the Menu Options

1.From any mode, press Menu .

2.Scroll to the required option, press Ok or to select.

3.Alternatively, key the numbers of the required option, typically 2 2 4 to reach 4 Mem Usage.

To Exit the Menu Options

Press Back or .

Your MTM800 may exit if no key presses are detected for a time-out period.

English

11

English

List of Menu Options

1 Messages

1

Send Sts

 

 

 

2

Inbox

 

 

 

3

Send Msg

 

 

1

New

 

 

 

 

2

Templates

 

 

 

 

 

 

 

 

3

Predefined

 

 

 

 

 

 

 

 

 

 

2 Addr. Book

1 Private

2 Phone

3 PABX

4 My Groups

3 Security

 

 

 

 

 

1

Keylock

 

 

 

 

 

 

2

PIN Protect

 

 

 

 

 

 

 

 

 

 

 

 

3

Change Code

 

 

 

 

 

 

 

 

 

 

 

 

4

Air Encrypt

 

 

 

 

 

 

 

 

 

 

 

 

5

K Validity

 

 

 

 

 

 

 

 

 

 

 

6

TMSCK Validity

 

 

 

 

 

 

 

 

 

7

DMSCK Validity

 

 

 

 

 

 

 

8

DMO SCK

 

 

 

 

 

 

 

9

Covert Mode

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Add ID / Add Phone / Add Ext

2 abc Order

3 By LocatÕn

4 Mem Usage

1 Select

2 View

3 Add Group

4 Remove Grp

5 Remove All

1 On

2 Off

1 On

2 Off

1 Add TMO

2 Add DMO

4 Setup

 

 

 

1

Tones

 

 

 

1

Ring Style

 

 

 

 

1

Duplex

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Keypad Tones

 

 

 

 

 

2

Simplex

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

1 On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

All Tones

 

 

 

 

1

On

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Talk Permit

 

 

2

Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

No Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Short Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Periodic Alert

 

 

3

Normal Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Alert

 

 

 

 

2

Language

 

 

 

1

English

 

2

Period

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Deutsch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Français

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Español

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Nederlands

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Svenska

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Русский

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Data Setup

 

 

 

 

8

<User Defined>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Voice Only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Data Only

 

 

 

 

 

 

 

 

 

 

4

Backlight

 

 

 

 

3

Voice & Data

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Manual

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Semi-auto

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Auto

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disablef

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See next page

<9 Styles>

<9 Styles>

12

List of Menu Options (Cont’d)

4 Setup

 

 

 

5 Time & Date

 

 

 

(cont’d)

 

 

 

5

Own Number

 

 

6

Acc’ry Type

 

 

 

 

 

 

 

1

Private Num

6

Networks

 

 

 

 

 

2

Phone Num

 

 

 

 

 

 

 

 

 

 

 

1

Networks Sel

 

 

 

 

 

 

 

2

Oper. Mode

 

 

 

 

 

 

 

7

Scan

 

 

 

 

3

TXI Mode

 

 

 

 

 

 

 

 

 

 

1

Scanning

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Active List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Scan Lists

 

 

 

 

 

 

 

8

Recent Call

 

 

 

 

 

 

 

<40 lists>

 

 

 

 

 

1

Dialed

 

 

 

 

 

 

 

2

Received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Missed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Display

2 Set

3 Time Offset

4 Format Time

5 Format Date

1Standard 2 Handset 3 External

4 External & Std

1Home Only

2 Select Net

1Trunk Mode 2 Direct Mode

1Activate

2 Deactivate

1 On

2 Off

1 Add Group

2 View List

3 Edit List

4 Rename

5 Clear List

9 More ...

 

 

1

Location

 

 

 

1

Position

 

 

 

2

Packet Data

 

 

 

2

Interface

 

 

 

 

 

1

Sent

 

 

 

 

 

 

 

 

2

Received

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Bandwidth

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Encryption

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Time & Date

Time Only

Date Only

Off

1 On

2 Off

Some menu numbers may be different than the listed as some menu options can be enabled/disabled by your Service Provider.

English

13

English

The Display

Display Icons

When you turn on your MTM800, icons appear along the top of the display to indicate the following conditions:

Display Icon

Description

 

 

Trunked Mode Operation

Signal Strength (TMO)

Allows you to check signal strength. More bars indicate a stronger signal.

Priority Scan

Indicates priority scanning is activated in the MTM800.

Data Connected

Displayed when the MTM800 is successfully connected to an external device and ready for data transfer.

Data Transmit/Receive

Displayed when the MTM800 is transferring data to/ receiving data from the external device (laptop or desktop PC).

Direct Mode Operation

Signal Strength (DMO)

Indicates an incoming Direct Mode Group Call.

Direct Mode

Displayed when the MTM800 is in Direct mode.

DMO Gateway

Indicates that gateway is selected. The icon has three states:

Solid — while the MTM800 is synchronised with the gateway.

Flashing — while the MTM800 is not synchronised or during attachment.

No icon — during a terminal to terminal and repeater call.

14

Display Icon

Description

 

 

DMO Repeater

Displayed when the repeater option in DMO is selected. This icon has three states:

Solid — while the terminal has detected the repeater (i.e., when the terminal receives a presence signal). Blinking — while the terminal has not detected the repeater or during attachment.

No icon — during a terminal to terminal and gateway call.

General Icons

Unread Message

Indicates that you have unread messages in your

Inbox.

New Message Has Arrived

Your Inbox could not open due to an on-going activity. The icon remains to remind you of new messages in your Inbox.

Emergency

Appears while the MTM800 is in Emergency mode.

Displaying Long Numbers or Messages

Three dots after a number or message indicate that it continues on the next page. Press More to read the next “numerical” page and More again to return to the previous page. Press to read the next “text” page and to return to the previous page.

English

15

English

Getting Started

Powering the MTM800 On/Off (On/Off Button)

To power On, Press and hold the On/Off push button. Your MTM800 performs a self-check and registration routine. After successful registration, the MTM800 is in service.

To power Off, press and hold the On/Off pushbutton. You will hear an audible beep and the Powering Off message is displayed.

Powering On the MTM800 (Ignition Sense)

If the MTM800 is configured with ignition sense, the terminal will automatically turn on whenever the vehicle ignition is turned on.

Powering On the MTM800 (Emergency Foot Switch)

If an Emergency Foot Switch is connected and the MTM800 is powered off, press the Emergency Foot Switch to power on. The MTM800 will power on in Emergency mode.

Powering On with Transmit Inhibit Active

The TXI Mode remains active at power On.

You will be asked whether to leave the TXI Mode On or not.

Ensure you have left the restricted area before deactivating Transmit Inhibit.

Press the Yes soft key to deactivate the TXI Mode. If the MTM800 was previously used in Trunked Mode (TMO), it will register to the network. If the MTM800 was previously used in Direct Mode it will remain in Direct Mode.

Press No in Trunked Mode and the MTM800 powers down; press No in DMO mode and you remain in DMO with TXI selected.

16

Uninstalling the Radio

OPTION 1:

Before disconnecting the 13.2V main power supply from the radio:

1.Switch off the radio.

2.Wait for a minimum of 4 seconds after the radio Off Switch is released.

Disconnect the 13.2V main power supply.

OPTION 2:

Turn off the main power supply WITHOUT switching OFF the radio.

Unlocking the MTM800

Your MTM800 may be locked at power up.

To unlock the MTM800 after powering on, enter the code at the prompt. The MTM800 enters the default home mode.

English

17

English

Selecting TMO or DMO Operation

Entering TMO or DMO

Enter TMO or DMO in one of the following ways:

Press

Menu

6 2 1 (TMO) if the MTM800 is in DMO.

Press

Menu

6 2 2 (DMO) if the MTM800 is in TMO.

Press the TMO/DMO one-touch button (configured by your Service Provider).

Calls (Trunked Mode Operation)

TMO Group Calls

A Group Call is a communication between you and others in a talkgroup. A Talkgroup is a pre-defined set of subscribers enabled to participate in and/or invoke a Group Call.

Talkgroups are divided into ranges. Each range may contain several talkgroups.

Making a TMO Group Call

1.Press Mode until “Group Mode” appears on your display.

2.If this is the required talkgroup and range, press and hold the PTT. Wait for the talk permit tone and then speak into the microphone.

Release the PTT button to listen.

3.If you wish to call a talkgroup other than the one shown, scroll through the talkgroups.

4.To select a range other than the one shown, press Optns, followed by Range. Scroll through the ranges. Press Ok to select the range, press Back to cancel range scrolling.

When you start a call, all members of the selected talkgroup who have their units turned on, will receive the transmission.

The “No Group” message is displayed when you are out of the normal coverage area of your selected talkgroup. You must then select a new talkgroup that is valid for your working location.

18

Receiving a TMO Group Call

Unless it is engaged in an active call, your MTM800 will automatically switch to Group Mode and receive the transmission. To answer the call, press and hold PTT.

Your MTM800 shows the Group name and the caller’s private number or alias if previously stored in your address book.

When receiving a Group call, you will hear a “New Group Call” tone.

For incoming call alert, see settings in the Tones menu option.

Receiving a TMO Broadcast Call

The Broadcast Call (also called Site Wide Call) is a high-priority group call from the console operator (or dispatcher) to all users. The MTM800s are configured to monitor a Broadcast Call, but users cannot talk back.

The Broadcast Call pre-empts an on-going Group Call that has the same (or lower) call priority.

Calls (Direct Mode Operation)

DMO Group Calls

In DMO, the MTM800 can be used without your Service Provider’s infrastructure.

Direct Mode allows communication with other terminals also operating in Direct Mode, which are on the same frequency and talkgroup as your MTM800.

In DMO it is only possible to place the following call types: Group Calls, Emergency Group Calls and Private Half-duplex Calls.

You can receive a call from the selected talkgroup and from an open group. (An open group is a super-group of all DMO groups.)

When you start a call, the members of the selected talkgroup who have their units turned on will receive the transmission.

In DMO the MTM800 can communicate with the trunking system (and vice-versa) if the Gateway option is enabled in the MTM800.

English

19

Making a DMO Group Call

 

1.

Enter Direct Mode by selecting the Direct Mode option via the

 

 

menu.

English

2.

If this is the required talkgroup and range, press and hold the PTT

 

button. Wait for the talk permit tone and then speak into the

 

 

 

 

microphone.

 

 

Release the PTT button to listen.

Receiving a DMO Group Call

You can receive a DMO Group Call only when your MTM800 is in DMO.

Your MTM800 will display the caller’s private number or alias, and the talkgroup name.

Exiting DMO

To exit DMO, select the Operating Mode option your MTM800 should be operating on.

20

Calls (Private and Phone Calls)

Private Call

A Private Call, also called Point-to-Point or individual call, is a call between two individuals. No other terminal can hear the conversation. This call can be:

full-duplex call (if the system allows) in TMO

standard half-duplex call in TMO or DMO

Making a Private Call

1.To enter the Private Mode, press until Private Mode appears on the display.

2.Enter the number of the person you wish to call.

3.Press and release the PTT button. You will hear a ringing tone. Wait for the called person to answer your call.

4.Press and hold PTT. Wait for the talk permit tone (if configured) before talking, and release the PTT when listening.

5.To end the call, press . If the called person ends the call, the Call Ended message is displayed.

6.Press Back to return to the Private Mode display.

While Transmit Inhibit is activated, an incoming Private Call is indicated, but it is not possible to answer the call.

Receiving a Private Call

If the Service Provider configured the MTM800 to Automatic Mode Switch:

1.The MTM800 automatically switches to Private Mode. The display shows the caller’s identity.

2.To answer the incoming call, press PTT.

3.To end the call, press . The display returns automatically to the mode it was in before the incoming call arrived.

English

21

If the Service Provider configured the MTM800 to Manual Mode

Switch:

 

1.

If the MTM800 is NOT in Private Mode, a Prvt Call message and

 

 

 

the caller ID is displayed momentarily. The display returns to the

English

 

mode it was in before the incoming call arrived.

3.

To end the call, press

.

 

2.

To answer the call, press

, and then the PTT key.

 

If the called person ends the call, the Call Ended message is

 

displayed.

 

 

 

For call alert, see settings in the Tones menu option.

Phone and PABX Calls

The Phone Mode allows you to call a landline telephone number or a cellular mobile phone number. In this publication we use “phone number” when referring to these numbers.

The Private Automatic Branch Exchange (PABX) Mode allows you to call local (office) extension numbers. This mode needs to be activated by your Service Provider.

Both modes have the same dialling features.

While Transmit Inhibit is activated, an incoming Phone or PABX

Call is indicated, but it is not possible to answer the call.

Making a Phone or PABX Call

1. Press until Phone Mode appears on your display.

If a PABX call is required, press again. PABX Mode appears on your display.

2. Proceed as for making and receiving Private phone calls.

22

VOX Control

VOX (Voice Operating Transmission) allows the user to transmit voice in a hands-free condition. The radio is detecting audio automatically when full duplex private call and telephone call use the fist microphone.

This feature is only available if set up by your Service Provider. If it is disabled, transmission can start upon pressing PTT.

English

23

English

Emergency Mode

You can send and receive Emergency Group Calls in

Trunked Mode (TMO) or in Direct Mode (DMO). If your terminal is configured to operate through a gateway, Emergency calls can be placed through the gateway.

You can initiate an Emergency Group Call to and receive it from the selected talkgroup (TMO and DMO).

Your Service Provider will configure the Emergency Alarm and Hot Microphone features.

Emergency calls will be allocated emergency priority in the system.

Entering or Exiting Emergency Mode (TMO & DMO)

To enter Emergency mode from any mode, press and hold the emergency key .

The required time you need to press the Emergency button is set to default to 0.5 seconds. The time can be configured by your Service Provider.

For call alerts, see settings in the Tones menu option.

To exit Emergency mode, press and hold Back. You will switch to normal Group mode.

Invisible Emergency Mode

If the Invisible Emergency Mode is enabled by your Service Provider, all the audible and visible indications for operations in Emergency Mode are disabled.

Only the Emergency Private Call is exception for this feature.

Sending an Emergency Alarm

Your MTM800 will automatically send an Emergency Alarm when in Emergency mode. This is sent:

automatically, upon entering Emergency mode

24

if you press the Emergency key again while the MTM800 is in Emergency mode.

After sending the alarm, the screen will show one of the following delivery reports:

Alarm Sent

Alarm Failed

In both cases the screen returns within a few seconds to the main screen of the Emergency mode.

Due to no delivery confirmation in DMO, Alarm Sent information confirms only sending the alarm.

Some systems do not support the Emergency Alarm feature when the user is in a “Local Area Service” area.

The Emergency Alarm is a special status message sent to the dispatcher monitoring the selected talkgroup. This can be used in dispatch systems to highlight emergency calls.

Pressing the Emergency button, even if Transmit Inhibit is activated, causes the MTM800 to radiate immediately. The MTM800 must NOT be within the RF sensitive area when entering Emergency mode.

Hot Microphone Feature

If the Hot Microphone feature was programmed into your MTM800 by your Service Provider, you can make an Emergency Group Call and talk to the dispatcher (and members of your talkgroup) without the need to press and hold the PTT.

The microphone will stay open for a time period (programmed by your Service Provider). The microphone will stay open until:

the Hot microphone time period expires

you press PTT during the Hot Microphone period

you press the End key

At the end of the Hot Microphone the Emgcy Mic Ended message will be displayed and the MTM800 reverts back to the Emergency Mode. The Hot Microphone feature is disabled and PTT operation returns to normal.

If required you can resume Hot Microphone by pressing the emergency key again.

English

25

Making an Emergency Group Call

English

Hot Microphone enabled - to initiate an Emergency Group Call, press and hold Emergency Button.

Hot Microphone disabled - to initiate an Emergency Group Call, press and hold Emergency Button. When the display has changed to Emergency Group Call hold PTT and wait for talk permit tone (if configured) and talk. Release the PTT to be able to listen.

26

Messages

Sending a Status Message

Select the desired group, then press Menu - 1 Messages - 1 Send Sts - Ok. Select status and press PTT to send the status message.

Sending a New Message

Press Menu - 1 Messages - 1 New - Ok. Write your message. Press Optns and select Send. Select your mail recipient or enter number. Press PTT to send the new message.

Sending a User-defined Message

Press Menu - 1 Messages - 2 Templates - Ok. Scroll and choose your required template. Press Optns and select Send. Select your mail recipient or enter number. Press PTT to send the message.

Sending a Predefined Message

Press Menu - 1 Messages - 2 Templates - Ok. Scroll and choose your required template. Press Edit to edit the message. Type required information. Press PTT to send the message.

Handling New Incoming Text Messages

The icon will flash on your display and the MTM800 sounds a tone.

To enter the Inbox press Menu - 1 Messages - 2 Inbox - Ok. Scroll to the messages and select Read soft key. To read a long message, press More to read the next page and Exit to return to the previous page.

Handling Old Messages

Press Menu - 1 Messages - 2 Inbox - Ok. Scroll to the messages and select Optns. You can read, erase one message or erase all by selecting the relevant option.

English

27

English

Tips & Tricks

One Touch

Your Service Provider can program the two Side keys and the Numeric keys (0-9) to many functions such as TMO to DMO switching and vice-versa.

Press and hold the keys to see to which function they are programmed.

“My Groups” Folder

You can select any group (TMO or DMO) and add it to your personal folder.

Press Menu - 2 Addr. Book - 4 My Groups to quickly access your “My Groups” folder.

Mode Change

To cycle through the Group, Private, Phone, and PABX modes, press Mode successively.

Switching between TMO and DMO

To switch from TMO to DMO press Menu 6 2 2.

To switch from DMO to TMO press Menu 6 2 1.

Setting Time & Date

Time and date are synchronized by the infrastructure. When not within the infrastructure signal range you can set the values manually.

To set time and date press Menu 4 5 2. Enter time and date using navigation key and/or alphanumeric keypad.

28

Loading...
+ 138 hidden pages