Motorola QIP7232 P2 User Manual

4.3 (3)

QIP7232 P2

Hybrid QAM/IP High-definition Set-top

Quick Start Guide

Before You Begin

Introduction

Congratulations on receiving a Motorola QIP7232 Hybrid QAM/IP High-definition Set-top. This document will help you set up your Hybrid QAM/IP HD Set-top to quickly get it up and running.

READ THIS FIRST

1. Determine if you are connecting to a:

High-Definition

Use the HDMI, component video (YPbPr), or IEEE-1394 outputs. No other video connection supports HDTV.

TV or monitor

If the TV has no HDMI input but does have a DVI input, connect a DVI-to-HDMI adapter or cable to the HDMI

 

out connector on the QIP set-top instead of the IEEE-1394 connection, and the DVI-HDTV connector on your

 

TV.

 

 

Standard-

Connect the S-Video connector using an S-Video cable, or connect the composite video connector using a

Definition TV

composite (RCA phono) cable. If the TV only has a coaxial RF input, connect it to the QIP7232 series RF OUT

 

connector.

2. Determine if you are connecting the audio to a home theater receiver or directly to the TV:

• For an HDMI or IEEE-1394 video connection, no additional audio connections to the TV are required.

For a DVI video connection, additional audio connections to the TV are required.

If the receiver or TV has a digital audio (S/PDIF) input, use the Optical Audio (S/PDIF) or Digital Audio (Coaxial) outputs. Otherwise, use the baseband left and right audio outputs.

3.Locate the cabling diagram(s) that best match the configuration.

4.Connect the audio and video cables in a manner matching that diagram.

5.Determine if you are connecting to a data device. For installation details, refer to the instructions included with the data device.

6.Connect the FiOS TV In terminal to the coaxial cable wall outlet.

7.Perform the operational check for the remote control.

8.Optimize the high-definition settings.

QIP7232 Quick Start Guide

1

Before You Begin

Front Panel

The front panel controls provide functional navigation if the remote control is lost or is temporarily out of service. Certain functions, such as those requiring a numeric entry, require a remote control. Some connectors are not enabled and require the support of application software.

1

2

3

4

5

 

 

REC

 

 

 

OK

 

 

 

 

 

 

 

POWER

 

 

 

 

QIP7200 2

1

USB connector

 

 

 

2

Cursor — 4-way menu navigation

 

 

3

Display Panel

 

 

 

4

Startup Indicator

 

 

 

5

Power — Turns the set-top on and off (standby)

 

Rear Panel

The rear panel contains a power outlet; connectors for video, audio, and RF cabling; data output; and data interface connectors. Some connectors are not enabled and require the support of application software.

1

2

3

4

5

7

8

11

13

 

 

 

 

Audio

Digital Audio

 

 

 

 

Y

 

 

 

 

 

L

Optical

 

 

 

 

Pb

 

 

 

 

Audio

 

1

 

 

R

 

 

2

 

 

Pr

 

 

3

 

 

 

 

FiOS TV In

4

RF TV Out

1394

Video Out

S-Video

5

 

 

 

 

Firewire

 

 

Removing card will disable Set-Top Box.

IR Remote

eSATA

Reserved

POWER

Input

 

 

6

9

10

12

14

15

16

 

 

 

 

 

 

1

FiOS TV In — Connects to FiOS signal from your service provider

 

 

 

 

 

 

 

 

2

RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR

 

 

 

 

 

 

 

 

 

 

 

3

IEEE-1394 — Audio and video device connection

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

YPbPr — Component video output (HDTV)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Audio — Composite Audio L/R outputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Video — Composite Video (SDTV) output

 

 

 

 

 

 

 

 

 

 

 

7

Digital Audio (RCA)* — Provides Dolby® Digital 5.1 audio or PCM output

 

 

 

 

 

 

8

Optical Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output

 

 

 

 

 

 

 

9

S-Video — Connects to S-Video (SDTV) input of TV or VCR

 

 

 

 

 

 

 

 

 

10

IR Remote Input — Connects to a remote control set-top accessory cable

 

 

 

 

 

 

 

 

 

 

 

11

HDMI — High-Definition TV (HDTV) connector

 

 

 

 

 

 

 

 

 

 

 

 

12

eSATA* — External Serial ATA disk interface (QIP7200 Only)

 

 

 

 

 

 

 

 

 

 

 

 

13

Ethernet* — Network connection

 

 

 

 

 

 

 

 

 

 

 

 

 

14

USB* 2.0 — High-Speed peripheral device connection

 

 

 

 

 

 

 

 

 

 

 

 

 

15

Reserved — Service only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

16

Power cord connector — 3-prong AC outlet

 

 

 

 

 

 

 

*Feature is dependent upon application setting and availability in content

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QIP7232 Quick Start Guide

 

 

 

 

 

 

2

Motorola QIP7232 P2 User Manual

Connecting Your Device

Cabling to an HDTV for Video

For the best possible HDTV video quality:

1.If the TV has an HDMI input, connect it to the QIP7232’s HDMI output. If the TV has a DVI input, you can connect it to the QIP7232’s HDMI output using an HDMI-to-DVI converter cable or adapter.

2. If the TV has neither an HDMI nor a DVI input but has an IEEE-1394 input, connect it to the QIP7232’s IEEE-1394 output. If you use IEEE-1394, on-screen graphics do not display. Otherwise, use the component video (Y, Pb, and Pr) connectors.

L/R audio connection or digital audio S/PDIF connection is required for sound with component video.

Note: Be sure to match up each signal to the same connection on the TV or the colors will not appear correctly on your TV.

Note: Because HDMI provides both video and audio output, no additional audio connections to the TV are required.

QIP7232 Quick Start Guide

3

Loading...
+ 8 hidden pages