Moen RothBury 3320 Series User Manual

Size:
947.21 Kb
Download

S p e c i f i c a t i o n s

DESCRIPTION

Metal construction with vatious finishes identified by suffix

OPERATION

Pull-on/push-offoperation of temperature and volume, rotational control of transfer valve

Temperature operates through an 180˚ arc of handle travel (full cold to full hot)

Adjustable temperature limit stop to control maximum hot water temperature

180˚ rotation of transfer valve handle with stops

Pressure balancing mechanism maintains selected discharge temperature to ± 3.6˚F (± 2˚C )

STANDARDS

Third party certified by CSA to meet CSA B-125,ASME A112.18.1M

ADA for lever handle

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

ICONMOENTROL®

with Built-In3 Function Transfer Valve Trim

Models: T4112 series

Valves: 3330 series 3320 series

2" Max Wall

(51mm)

54"

(1372mm)

FINISHED WALL LINE

3/16"(typ) (5mm)

Plaster

Ground

1.875"

(47.6mm)

C

L

5.875"

(149mm)

44"

(1142mm)

8.375"

(212.7mm)

Plastic

Tub/Shower

Surround

7" Max

 

(178mm)

THIN WALL APPLICATION

Escutcheon

39"

(991mm)

Floor

THICK WALL APPLICATION

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 11/07

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

S p e c i f i c a t i o n s

FAUCET DESCRIPTION

Metal construction with various finished identified by suffix

OPERATION

Single spray

FLOW

Showerhead limited to 2.5 gpm (9.5 L/min) Max

STANDARDS

Third party certified to meet CSA B125, ASME A112.18.1M and all applicable requirements referenced therein

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

5-7/8"(149mm)

ICON™

Single Function Showerhead

Models: 6312 series

1/2" IPS THREADS

6" (152mm) ARM

2-1/2"(64mm)

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 8/08

www.moen.com

S p e c i f i c a t i o n s

DESCRIPTION

Metallic spray face and shell

Brass swivel ball assembly

Available in various finishes identified by suffix

OPERATION

Single spray function

FLOW

Designed to deliver 1.75 gpm max (6.6 L/min) at 80 psi

STANDARDS

Third party certified to ASME A112.18.1/CSA B125.1 and all applicable requirements referenced therein

WARRANTY

Warranted for one year against material or manufacturing defects

21˚

Small Single Function Body Spray

Models: A501 series

A501 Series

2-1/2“

(63mm) 2“ (51mm)

2-1/2“(63mm)

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 8/08

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com