Moen Chateau 64920 Series User Manual

Size:
311.66 Kb
Download

S p e c i f i c a t i o n s

There is more than 1 version of this model.

Page down to identify the version you have.

DESCRIPTION

Metal construction with various finishes identified by suffix

1/2" IPS connections

Includes metal pop-uptype waste assembly

OPERATION

Knob style handles

Rotate either handle counterclockwise to open and clockwise to close

FLOW

Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

1224 cartridge design

Nonmetallic and stainless steel material

STANDARDS

Third party certified to: WaterSense,® CSA B-125.1,ASME A112.18.1 and all applicable requirements referenced therein

Certified to ANSI/NSF 61/9

Complies with California Proposition 65 and with the Federal Safe Water Drinking Act

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

CHATEAU®

Two-Handle4” Lavatory Faucet

With Metal Waste Assembly

Model: 4920 series

With 50/50 Waste Assembly Bulk Pack Model (12 per Carton):

64920 series, 64919 series

Less Waste Assembly

Model: 4900

Bulk Pack (12 per Carton):

64900

NOTE: 50/50 or metal waste assembly models are designed to be installed through 3 - 1” dia. holes 2” on center Models less waste assembly are designed to install through 2 - 1” min. dia. holes 4” on center

2"

2"

(50mm)

(50mm)

3-3/16"

 

(80mm)

ESCUTCHEON DIA.

 

 

6-1/4"x2-19/32"

 

(159mm x 66 mm)

HOT

COLD

1/2" NPT INLET

1/2" NPT INLET

6-9/64"

(156mm) 1-13/64"(30mm)

3-11/32"(85mm)

2-9/32"(57mm)

4-11/32"

3/4" (19mm)

MAX. DECK

(110mm)

THICKNESS

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 6/08

www.moen.com

DESCRIPTION

Metal construction with various finishes identified by suffix

1/2" IPS connections

Includes metal pop-uptype waste assembly

OPERATION

Knob style handles

Rotate either handle in a counterclockwise manner to open and clockwise to close

FLOW

Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

1224 cartridge design

Nonmetallic and stainless steel material

STANDARDS

Third party certified to WaterSense,® CSA B-125and ASME A112.18.1M and all applicable requirements referenced therein.

Certified to ANSI/NSF 61/9

Complies with California Proposition 65 and with the Federal Safe Water Drinking Act

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

S p e c i f i c a t i o n s

C

H

CHATEAU®

4” Lavatory Faucet with Metal Waste Assembly

Models: 4920 series

NOTE: THIS FAUCET IS DESIGNED TO BE I NSTALLED THRU 3 HOLES, 1" MIN. DIA.

5"(127mm)

 

 

 

 

 

 

1-1/4"(32mm)

 

 

 

2"

2"

 

 

 

 

 

(51mm)

(51mm)

 

 

DECK

 

 

 

 

 

 

GASKET

3-1/4"

 

 

 

 

 

 

 

 

 

2-3/4"

 

 

(83mm)

 

 

 

(70mm)

 

 

 

 

 

 

1-17/32"(39mm)

 

 

 

 

 

 

 

3/4"(19mm)MAX.

 

 

 

 

DECK THICKNESS

 

 

 

CHAIN

 

 

 

 

 

 

STAY

MOUNTING

13/16" (21mm)

HOT

 

COLD

 

O.D. SHANK

 

3-9/32"

1/2" NPT

 

1/2" NPT

NUT/WASHER

LIFT

(2) PLACES

(83mm)

 

INLET

INLET

 

 

 

ROD

 

 

 

 

 

 

 

CRITICAL DIMENSIONS

 

 

(DO NOT SCALE)

 

 

 

 

 

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 10/01

 

www.moen.com