Moen CAMELOT K-1515-2 User Manual

Size:
71.38 Kb
Download

S p e c i f i c a t i o n s

SINK DESCRIPTION

Manufactured of 20 gauge, type 301 nickel-bearingstainless steel

The large bowl is a minimum of 12" wide by 10" and is 5-1/2"deep

The sink ledge has two fixture mounting holes, 1-11/32"in diameter and 4" on center

Has one 2" diameter SEALTITE recessed drain with drop on basket

Soundshield undercoating maximizes sound deadening and inhibits condensation

The exposed surfaces are polished to a lustrous satin tone finish with a satin band

Includes all necessary mounting hardware

CUT OUT DIMENSIONS

Cut out dimensions are 14-3/8"x14-3/8"with a 3/8" corner radius. A tolerance of plus or minus 1/16" is acceptable

STANDARDS

Designed and manufactured to comply with the requirements of: ASME A112.19.3M and all requirements referenced therein

WARRANTY

Warranted for ten years against material or manufacturing defects

Camelot®

Single Bowl Bar Sink

Model: 22241

(K-1515-2)

SINK OVERALL DIMENSION

COUNTERTOP CUT-OUT

SEALANT MATERIAL

 

COUNTERTOP

BOWL

 

DIMENSION

 

CONTINUOUS

 

"U" CHANNEL

 

 

SINK

 

CLAMP

 

11"

 

 

(279mm)

Installation Detail

 

2"(51mm)

 

TYP

 

 

 

3-1/2"

 

 

(89mm)

8-1/2"

1-11/32"

 

(216mm)

15"

 

DIA. TYP.

 

 

(381mm)

 

 

WIDTH

 

 

10"

 

 

(254mm)

 

 

BOWL

 

2-5/8"R. TYP.

 

3/8" (10mm)

7-1/2"

 

R TY

1-1/2"

 

(191mm)

(38mm)

 

15" (381mm)

 

1-1/2"

1-1/2"

12"

(305mm)

(38mm)

(38mm)

 

 

 

 

5-1/2"

 

 

(140mm)

 

 

BOWL

 

 

DEPTH

 

SEA

 

 

DRAIN

 

 

ASSEMB

 

 

 

CRITICAL DIMENSIONS

 

 

(DO NOT SCALE)

 

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 4/05

www.moen.com