Moen 7037 87025 User Manual

Size:
3.14 Mb
Download

INS215A

OWNER’S MANUAL

Exclusively from

Model Numbers 7025, 7030, 7034, 7037 87025, 87030, 87034 Series

U.S. Patent Pending

Other Foreign and Domestic Patents Pending

PRODUCT FEATURES

Deck ring model

Deck plate models

 

Electronic

 

 

 

 

 

Newly styled handle

filter life

 

 

 

 

 

indicator

 

Filtered

and spout receptor

 

 

water

 

 

 

 

 

button

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Filtered

 

 

water outlet

Easy to replace water filter

1

HELPLINE: 1-877-DRINK-H2O

INS215A

 

1-877-(374-6542)

 

WELCOME TO MOEN®

Congratulations! You’ve purchased the revolutionary PureTouch® Classic Filtering Faucet System. This faucet is designed to provide great tasting, cleaner water with just one touch. To get the most enjoyment from your Moen PureTouch Filtering System, please read all installation and operating instructions carefully. With simple care and maintenance, the PureTouch Filtering Faucet System will provide many years of reliable performance. If you should have any questions, please call ustoll-freeat1-877-DRINK-H2O(1-877-374-6542).

TABLE OF CONTENTS

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Water Filtration Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . .3

Parts Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Filter Replacement Instructions . . . . . . . . . . . . . . . . . . . . . . .8

Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

California Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Performance Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

INS215A

HELPLINE: 1-877-DRINK-H2O

2

 

1-877-(374-6542)

 

WATER FILTRATION SAFEGUARDS

Your PureTouch® Classic Filtering Faucet System integrates carbon block filtration technology designed by Culligan® International into a faucet spout. This technology is fast and effective at reducing contaminants commonly found in water and is certified by NSF® International. The PureTouch Filtering Faucet System and installation must comply with State and Local laws and regulations. To ensure optimal operation of your new Moen faucet, please read the following safeguards carefully.

MicroTech™ Filter Cartridges

• MicroTech filter cartridges will reduce :

Chlorine, Taste and Odor (MicroTech 400, 600) Lead (MicroTech 400, 600)

Cysts (Cryptosporidium, Giardia)(MicroTech 600)*

*The contaminants removed or reduced by this filter are not necessarily in your water.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

MicroTech filter cartridges are designed for replacement after dispensing 200 gallons of filtered water. Water conditions and usage may affect filter life and water taste.

The electronic indicator will signal when filter replacement is necessary (see page 9).

Use only MicroTech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet System.

Filter flow rate = .4-.6gpm at rated pressure (20psi min. - 125psi max.).

Water Temperature

Minimum/Maximum faucet operating temperature = 40° - 150°F.

CAUTION: Do not filter water above 100° F.

MicroTech Filter Flushing Instructions

New MicroTech Filter Cartridge: After installing a new filter into the faucet, allow cold water to run through the filtered water outlet for 5 minutes to flush out any loose carbon particles. The filter life indicator will alternately flash amber and green for the first five minutes after the indicator is manually reset (see page 9) as an aid in timing the filter flushing period.

Daily Use: Allow cold water to run through the filter for 10-15seconds prior to first use. If the filter has not been used for several days, run cold water through the filter for 60 seconds prior to use.

Questions

 

 

 

• If you have any questions please call our toll-freehelpline,

 

1-877-DRINK-H2O.Monday through Friday

8:00 a.m. to 8:00 p.m.

1-877-(374-6542)

Saturday

8:00 a.m. to 6:30 p.m.

3

HELPLINE: 1-877-DRINK-H2O

INS215A

 

1-877-(374-6542)

 

 

PARTS DESCRIPTION

1

2

 

 

 

 

3

 

 

4

 

 

5

14

 

 

 

6

 

7

13

 

8

11

 

9

 

 

 

10

15

 

 

 

12

 

24

 

 

16

17

25

 

 

 

28

26

 

18

27

 

 

19

 

 

 

 

30

20

 

31

 

 

 

 

21

 

 

31

22

 

 

23

 

 

29

 

DESCRIPTION

 

 

1

Solid Handle Body

 

 

2

Set Screw

 

 

3

Plug Button

 

 

4

Dome & Pivot

Retainer Assembly

 

 

 

5

Cartridge Screw

 

 

6

Handle Adapter &

Connector Assembly

 

 

 

7

Pivot Stop

 

 

8

Spout Retaining Nut

 

 

9

Bearing Washer

 

 

10

"D" Washer

 

 

11

Retainer Clip

 

 

12

1225 Cartridge

 

 

13

Filter Cartridge

 

 

14

Filltering Appliance

 

 

15

Lower Spout Assembly

 

 

16

Threaded Shank

 

 

17

Supply Tubes (2)

 

 

18

Bottom Bearing Washer

 

 

19

1/2" Threaded Fitting

 

 

20

Deck Ring with Gasket

 

 

21

Deck Plate

 

 

22

Mounting Bracket

 

 

23

Mounting Nut

 

 

24

Side Spray

(Spray Models)

 

 

 

25

Hose Guide with Gasket

(Side Spray Models)

 

 

 

26

Spray Hose

 

 

27

Extended Locknut

(Side Spray Models)

 

 

 

28

Swivel Nut (Spray Models)

 

 

29

Mounting Tool

 

 

30

Deck Plate

(Spray in Deck Models)

 

 

 

31

Support Plate with Gasket

 

 

INS215A

HELPLINE: 1-877-DRINK-H2O

4

 

1-877-(374-6542)

 

INSTALLATION INSTRUCTIONS

CAUTION: Always turn water supplies OFF before removing existing faucet. Turn faucet on to relieve water pressure and to ensure water is completely off.

OLD FAUCET REMOVAL: Your old faucet may attach in a number of different ways depending on the brand. To remove, reverse steps in installation instruction sheet of old faucet, follow instructions in a DIY type of book or follow instructions listed below.

After years of use, you may need to use a penetrating oil spray on the faucet mounting hardware to help loosen corrosion and assist in removing the faucet connections.

Disconnect water supply lines from faucet supply lines. Remove mounting hardware using a basin wrench or channel lock pliers. Lift out faucet. Thoroughly clean and dry the mounting surface after removal of old faucet.

INSTALLING THE PURETOUCH® Classic FILTERING FAUCET SYSTEM

Helpful Tools: Phillips screwdriver, two adjustable wrenches

CAUTION: Do not use with portable washing devices, i.e. dishwashers, washing machines.

NOTE: Do not bend supply tubes until instructed in step 4.

HINTS: When using flexible supplies, we recommend threaded fittings be installed onto supply lines before placing faucet through sink holes (see step 6). For installations on tile countertops, remove rubber gasket from underneath support plate(31) or deck ring(20) and apply a bead of putty in its place. Roll the putty into the diameter of a pencil. When applied in the groove, the putty should protrude a minimum of 1/16".

Side Spray Installation (side spray models only)

1.Locate foam gasket on hose guide (25) by sliding gasket onto shank and tucking outer edge of gasket under the hose guide(25). Do not drive the center of the gasket up into the hose guide. Install hose guide(25) through furthest left or right hole in sink. From under sink, thread extended locknut(27) (either side up) on shank of hose guide and tighten by hand. Feed spray hose(26) down through the hose guide(25) (do not connect spray hose to faucet until step 6 ).

27

25

26

25

5

HELPLINE: 1-877-DRINK-H2O

INS215A

 

1-877-(374-6542)

 

SINK
SINK

2a. WARNING: Do not straighten bent supply tubes until

step 4.

SINK

 

DECK PLATE MODELS: Install faucet through deck holes

 

(threaded shank (16) to back). Center faucet on sink with

 

support plate (31) oriented in sink holes.

GROOVE

DECK RING MODELS: Place deck ring(20) over supply

 

tubes (17) and threaded shank(16) against bottom of

 

faucet body. Install faucet through deck hole (threaded

Back View of

shank (16) to back).

Faucet Installation

FOR ALL MODELS: Position spout to side to keep faucet from tilting forward. Refer to step 2b for installation of mounting bracket(22).

DeckDECKringRING

2b. IMPORTANT: DECK THICKNESS (countertop)

Your deck thickness determines whether the mounting bracket (22) is installed open side up or down. For spray models, a groove on the threaded shank(16) indicates the

minimum amount of thread length which must be exposed for proper attachment of nuts (23) and(28). For models without spray, a minimum of 1/2" of threaded shank(16) must be exposed for proper attachment of nut(23). Position mounting bracket onto threaded shank(16) and around supply tubes(17). Do NOT kink tubing. Install mounting nut(23) and tighten by hand.

For deck thickness up to

For deck thickness over

1-1/8"deep, install

1-1/8"deep, install

mounting bracket (22)

mounting bracket (22)

OPEN SIDE UP.

OPEN SIDE DOWN.

GROOVE

22

GROOVE

3.Be sure faucet is positioned evenly on sink. Make final tightening of mounting nut (23) with mounting tool(29).

4.Carefully straighten each supply tube using two hands. At this time, affix the Caution Hang Tag onto

either supply tube over the 1/2” threaded fitting (19). If using flexible supply lines with compression fittings, thread supply line nuts on finger tight, then holding one threaded fitting with a wrench, tighten nut with another wrench, rotating one half turn. Do not overtighten. Connect the existing hot and cold water supply lines to the two (2) 1/2” threaded fittings. The hot supply tube is always to the left when threaded shank(16) is positioned to rear.

INS215A

HELPLINE: 1-877-DRINK-H2O

 

1-877-(374-6542)

CAUTION:

Severe bends of the supply lines may cause crimping and restricted water flow could result.

6

5. FOR MODELS WITH SPRAY IN DECK PLATE(30),

 

install spray hose (26) and spray head(24)

 

through deck plate hole.

24

6.TO CONNECT SPRAY HOSE FOR ALL SPRAY MODELS:

Connect spray hose swivel nut (28) to the threaded shank(16). Tighten swivel nut by hand plus 1/4 turn with pliers or channel locks being careful not to twist the spray hose(26). DO NOT OVERTIGHTEN.

Flushing is required. See flushing instructions below.

26

Sink

LINE FLUSHING INSTRUCTIONS

IMPORTANT: Pipe chips, sand, stones and other solids found in new and renovated plumbing can damage the sealing surfaces of the filter cartridge and cause a leak. To avoid damage, DO NOT TURN ON SUPPLY VALVES until instructed below.

Before you insert the filter and filtering appliance:

1. Turn faucet on in the full cold position (handle pointing to the right) and allow cold water to flow for 15 seconds

2.Without turning the faucet off, turn the handle to the full hot position (handle pointing to the left) and allow hot water to flow for 15 seconds.

3.If side spray is installed, without turning the faucet off, turn the handle to the mid/mix position (handle pointing toward you) and turn on the spray for 15 seconds.

4.Shut off faucet.

5.You are now ready to insert the filter and filtering appliance.

7

HELPLINE: 1-877-DRINK-H2O

INS215A

 

1-877-(374-6542)

 

Filtering Appliance Faucet head o-ring seal
Spacer
Outlet Ports Filter

MICROTECHFILTER INSTALLATION/REPLACEMENT

1. Install a new filter by wetting the outlet ports with water and then inserting into the round filter ports on the faucet head and pushing the filter and head together. Both outlet ports must be

fully inserted into the filter ports. 2. Install the filter and faucet head

assembly on to the spout by wetting the faucet head o-ringseal and rubber spacer and then carefully sliding the free end of the filter

into the spout. The head will need to be initially

turned approximately 1/2 turn counter clockwise from its normal position to slip past the safety catch. Lock the head into place by simultaneously pushing and twisting the head clockwise. When properly installed the head will feel secure, and will be correctly oriented on the spout.

3. Reset the filter life indicator by pushing the filterbutton 3 times. Wait 10 seconds. You should not berunning water while resetting the filter life indicatorbecause the filter button will remain depressed with thefirst push as it switches to filter mode. The filter life indicator

has been correctly reset if a short series of rapidly flashing green light occurs, indicating that the new filter flushing

period has begun. 4. Flush the filter (see page 3) for 5 minutes before

initial use.

Your new Moen faucet is now ready for normal use.

To replace or install filter - 1. Turn off the faucet. Remove the faucet head by

twisting it approximately 1/4 turn counter clockwise to unlock it. Gently pull the faucet head away from thespout and twist it approximately another 1/4 turn to get the faucet head past the safety catch. The faucet head and depleted filter (if one is installed) can now be pulled

completely out of the spout. 2. The filter is held to the faucet head by two outlet

ports, which connect into the head. Remove the old filter by simply pulling it straight off. Discard the old

and install a new MicroTech 400 or 600 filter.

Note: The faucet will function correctly in unfiltered stream with or without a filter installed. The faucet will not function

filter mode without a filter. If a filter is not installed and the filter button is depressed, unfiltered water will flow from both the filtered water outlet and the stream outlet aerator, and the filter button will not automatically stay depressed.

Use only Microtech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet system. The Microtech filters are high performance carbon block filters developed specifically for the PureTouch system.

INS215A

HELPLINE: 1-877-DRINK-H2O

8

 

1-877-(374-6542)

 

OPERATING INSTRUCTIONS

Controlling The Water

The PureTouch system has two options for water delivery; unfiltered stream and filtered water.

STREAM MODE: Unfiltered water in regular stream flow.

When the water is turned on at the faucet, the spout will always begin operating in the regular stream mode.

FILTERED WATER MODE: Filtered water dispensed through the separate filtered water outlet.

Pressing the front filtered water button will divert water through the filter and dispense filtered water from a separate outlet. To exit the filter mode, shut off the faucet.

CAUTION: Only filter cold water. Do not filter water above 100° F.

Electronic Indicator

The flashing light on the electronic filter life indicator provides information regarding the performance of the filter. The indicator provides you with information throughout the life of the filter to help communicate the level at which it is performing. Only reset the indicator when installing a new filter. Resetting the indicator at any other time will cause incorrect filter life indication.

 

Indicator Color

Performance

 

 

Amber & Green

A new filter must be flushed with cold

 

 

 

water for 5 minutes after it is installed.

 

 

 

This procedure helps clean the filter of

 

 

 

loose carbon particles

 

 

Green

Filter performing with optimum

 

 

 

efficiency

 

 

Amber

Caution: Filter is ready for replacement

 

 

 

(approximately 16 gallons left).

 

 

Red

Warning: Filter is ready for replacement

 

 

 

(approximately 8 gallons left).

 

 

Red (fast)

Filter life is depleted, discard old filter

 

 

 

and replace with a new MicroTech 400

 

 

 

or 600 filter.

 

 

 

 

 

*If fast red doesn’t change to slow amber/green after memory has been reset, reset was not complete and needs to be redone. Follow step 3 on page 8.

The electronic indicator is powered by a replaceable, standard 3V lithium watch battery (2032) designed to last several years.

Battery Replacement

Follow filter replacement instructions to remove filter appliance. Locate battery compartment drawer, pull out and replace battery, positive side up. Keep the battery and battery compartment dry. The electronic indicator will retain the correct filter life information when the battery is removed and replaced.

9

HELPLINE: 1-877-DRINK-H2O

INS215A

 

1-877-(374-6542)