Moen 6410 SERIES User Manual

Size:
251.94 Kb
Download

S p e c i f i c a t i o n s

DESCRIPTION

Metal construction with various finishes identified by suffix

1/2" IPS connections

Includes metal pop-upwaste assembly

OPERATION

Lever style handles

Maximum handle(s) rotation angle is 90˚ to full on

Rotate hot side counterclockwise to open (clockwise to close)

Rotate cold side clockwise to open (counterclockwise to close)

FLOW

Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

1224 cartridge design

Nonmetallic and stainless steel material

STANDARDS

Third party certified to WaterSense,® CSA B125, ASME A112.18.1M, ANSI A117.1, and all applicable requirements referenced therein

Certified to ANSI/NSF 61/9

Complies with California Proposition 65 and with the Federal Safe Drinking Water Act

ADA for lever handle

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

EVA™

4" Lavatory Faucet with Metal Waste Assembly

Models: 6410 series

Bulk Models: 66410, 66411*

(Bulk packed 6 per carton), 50/50 waste assembly

*Includes hot (red) and cold (blue) indicators.

NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THRU 3 HOLES, 1" MIN. DIA.

3“

4“

4“

(76mm)

(102mm)

(102mm)

 

 

 

 

6-3/16“

 

 

(157mm)

 

 

4-1/4“

 

 

(108mm)

3-7/8“(98mm)

Hot

Lift

Cold

3/4”

1/2" NPT

Rod

1/2" NPT

 

 

 

(19mm)

 

 

 

Max. Deck

 

 

 

Thickness

CRITICAL DIMENSIONS

(DO NOT SCALE)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

Rev. 7/08

www.moen.com