Moen 4962 series User Manual

Size:
299.76 Kb
Download

S p e c i f i c a t i o n s

There is more than 1 version of this model.

Page down to identify the version you have.

DESCRIPTION

 

 

Hydrolock® quick connect system

 

 

Metal construction with various finishes identified by suffix

 

 

1/2" IPS shanks

 

 

Designed to be installed on 8" to 16" centers

 

 

Includes metalpop-uptype waste assembly

 

 

OPERATION

 

 

Acrylic knob style handles.

 

CHATEAU®

Rotate either handle in a counterclockwise

 

 

manner to open and clockwise to close

 

Two-HandleWidespread

FLOW

 

Lavatory Faucet

Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,

 

 

 

 

for products made before October 2008 flow is limited to

 

With Metal Waste Assembly

 

2.2 gpm max (8.3 L/min)

 

Model: 4962 series

CARTRIDGE

 

 

 

1224 cartridge design

 

With 50/50 Waste Assembly

Nonmetallic and stainless steel material

 

STANDARDS

 

Bulk Pack (6 per carton)

Third party certified WaterSense,® CSAB-125.1,ASME

 

Model: 64962 series

 

A112.18.1 and all applicable requirements

NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA.

 

referenced therein

Certified to ANSI/NSF 61/9

HOLE. VALVES INSTALL THROUGH 1-1/8"MIN. DIA. HOLE

Complies with California Proposition 65 and with

 

 

 

the Federal Safe Water Drinking Act

 

 

WARRANTY

 

 

Lifetime limited warranty against leaks, drips and

 

 

 

finish defects to the original consumer purchaser

 

 

5 year warranty if used in commercial installations

 

 

 

 

8"

 

 

 

(203mm)

4"

 

 

 

(101mm)

 

5-1/2"

 

4-1/4"

(140mm)

2-3/4"

(108mm)

ESCUTCHEON DIA.

(70mm)

 

2-1/8"

 

 

 

(54mm)

 

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 9/08

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

S p e c i f i c a t i o n s

DESCRIPTION

Metal construction with various finishes identified by suffix

1/2" IPS shanks

Designed to be installed on 8" to 16" centers

Includes metal pop-uptype waste assembly

OPERATION

Acrylic knob style handles.

Rotate either handle in a counterclockwise manner to open and clockwise to close

FLOW

Flow is limited to 2.2 gpm max (8.3 L/min)

CARTRIDGE

1224 cartridge design

Nonmetallic and stainless steel material

STANDARDS

Third party certified WaterSense,® CSA B-125.1,ASME A112.18.1 and all applicable requirements referenced therein

Certified to ANSI/NSF 61/9

Complies with California Proposition 65 and with the Federal Safe Water Drinking Act

WARRANTY

Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser

5 year warranty if used in commercial installations

DISCONTINUED STYLE

CHATEAU®

Two-HandleWidespread

Lavatory Faucet

With Metal Waste Assembly

Models: 4962 series

NOTE: SPOUT INSTALLS THROUGH 1" MIN. DIA. HOLE. VALVES INSTALL THROUGH1-1/8"MIN. DIA. HOLE

8"(203mm) MIN.

16"(406mm) MAX.

 

 

 

4"(102mm)

 

 

 

 

 

5-1/8"

 

 

 

 

 

 

 

 

 

 

 

MIN.

 

 

 

 

 

 

 

 

 

 

 

 

(130mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ESC

2-7/8"

2-1/2"

(73mm)

(64mm)

 

DIA.

 

HOT

COLD

INLET

INLET

 

FLEXIBLE

 

CONNECTORS

1-11/16"(43mm)

1-1/4"(32mm)MAX. DECK THICKNESS

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 9/08

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com