Light X3e
Operator´s Manual
PageScope Light
Fiery Z4/X3e for CF9001
7664-1179--11
i
Foreword
Welcome
PageScope Light Fiery Z4/X3e for CF9001 is a device control utility
program provided by the HTTP server built into the Fiery Z4/X3e
(printer controller for CF9001). With a standard Web browser, this
utility can be used as an interface for remote control of the CF9001.
Trademark Acknowledgements
Minolta is a registered trademark of MINOLTA CO., LTD.
Apple and Macintosh are registered trademarks of Apple Computer,
Inc.
Ethernet is a registered trademark of Xerox Corporation.
Fiery and the Fiery logo are registered trademarks of Electronics for
Imaging, Inc. Fiery WebTools is a trademark of Electronics for
Imaging, Inc.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation.
Netscape Communications, the Netscape Communications logo,
Netscape Navigator, Netscape Communicator, and Netscape are
trademarks of Netscape Communications Corporation.
PostScript is a registered trademark of Adobe Systems, Inc.
Solaris is a trademark of Sun Microsystems, Inc.
All other product names are trademarks or registered trademarks of
their respective holders.
Copyright 2000 MINOLTA CO., LTD.
The information contained in this manual is subject to change
without notice to incorporate improvements made on the product
or products the manual covers.
ii
Contents
CONTENTS
1 System Requirements
.......................................1
2 Access
....................................................................2
2.1 Operation ...........................................................2
3 Screen Configuration
........................................3
4 System Tab
............................................................5
4.1 Summary ...........................................................5
4.2 Details ................................................................6
4.2.1 Input Tray .................................................6
4.2.2 Output Tray ..............................................7
4.2.3 Hard Disk Status ......................................8
4.2.4 ROM Version ............................................9
4.2.5 Interface Information .............................10
4.2.6 Consumable Status ...............................11
4.3 Preference .......................................................12
4.4 Online Assistance ...........................................13
Contents
iii
5Printer Tab
...........................................................15
5.1 Printer Front Panel ..........................................15
5.2 Test Print ..........................................................16
5.3 PostScript Font ...............................................17
Appendix Status List ...................................
18
1 System Requirements
1
1 System Requirements
The following items are required to use this utility.
Computer
• Software
• NIC (Network Interface Card)
• Ethernet or Token Ring
• TCP/IP Protocol
CF9001
Printer Controller
• Fiery Z4 for CF9001 (external) or Fiery X3e for CF9001 (built-
in)
Operating System Web Browser
Windows 95/98/NT 4.0/2000 Internet Explorer 3.02 or higher
Netscape Navigator 3 or higher
Macintosh System 7 or higher Internet Explorer 4.5 or higher
Netscape Navigator 4 or higher
Solaris 2.5.1/2.6/7 (2.7) Netscape Navigator 4 or higher
Linux Netscape Navigator 4 or higher
2 Access
2
2 Access
PageScope Light Fiery Z4/X3e for CF9001 can be accessed directly
from a Web browser.
1. Start the Web browser.
2. In the URL field, enter the IP address of the printer controller as
shown below.
http://
<IP address of printer controller>
/
(Example) When the IP address of the printer controller is
192.9.200.200:
http://192.9.200.200/
3. This causes the PageScope Light Fiery Z4/X3e for CF9001 screen
to appear.
2.1 Operation
PageScope Light Fiery Z4/X3e for CF9001 operation is identical to
that for Internet Web pages. Clicking a hot link jumps to the link
destination, and the
Back
and
Forward
buttons scroll through pages
backwards and forward.
3 Screen Configuration
3
3 Screen Configuration
The configuration of the PageScope Light Fiery Z4/X3e for CF9001
screen is shown below.
Note
➀ Minolta PageScope Light Logo
Clicking the logo jumps to the Website shown below.
www.minolta.com
➁ Status Display
The current status of the CF9001 is indicated by both icons and
text. The message
Ready
appears in the top line of text when
the CF9001 is operating normally. For full details about screen
contents, see Appendix – Status List.
• Screen images shown in this manual may differ slightly from actual
ones. In addition, specifications are subject to change without prior
notice.
➀
➀➀
➀
➁
➁➁
➁
➂
➂➂
➂
➃
➃➃
➃
➅
➅➅
➅
➄
➄➄
➄
Loading...