Maytag W10097007A - SP, W10096990A User Manual

0 (0)

ELECTRIC or GAS DRYER

SÉCHEUSE

ÉLECTRIQUE ou À GAZ GUIDE

USE AND CARE GUIDE

D’UTILISATION

 

ET D’ENTRETIEN

 

 

 

 

Para una versión de estas instrucciones en español, visite www.maytag.com

Table of Contents

 

 

DRYER SAFETY................................................................

 

2

CHECK YOUR VENT SYSTEM

 

 

FOR GOOD AIR FLOW...................................................

 

4

USE SENSOR DRY/AUTOMATIC DRY CYCLES FOR

 

BETTER FABRIC CARE AND ENERGY SAVINGS..............

4

CONTROL PANEL & FEATURES......................................

 

5

CYCLE GUIDE.................................................................

 

6

USING YOUR DRYER......................................................

 

7

DRYER CARE...................................................................

 

9

TROUBLESHOOTING...................................................

 

11

WARRANTY...................................................................

 

13

ASSISTANCE OR SERVICE...........................

BACK COVER

Table des matières

 

SÉCURITÉ DE LA SÉCHEUSE.........................................

 

14

VÉRIFICATION D’UNE CIRCULATION D’AIR

 

ADÉQUATE POUR LE SYSTÈME D’ÉVACUATION ........

16

UTILISATION DES PROGRAMMES DE SÉCHAGE PAR

 

DÉTECTION/PROGRAMMES AUTOMATIQUES POUR

 

UN MEILLEUR SOIN DU TISSU ET DAVANTAGE

 

D’ÉCONOMIES D’ÉNERGIE..........................................

 

16

TABLEAU DE COMMANDE

 

 

ET CARACTÉRISTIQUES................................................

 

17

GUIDE DE PROGRAMMES............................................

 

18

UTILISATION DE LA SÉCHEUSE...................................

 

19

ENTRETIEN DE LA SÉCHEUSE.......................................

 

21

DÉPANNAGE.................................................................

 

24

GARANTIE.....................................................................

 

26

ASSISTANCE OU SERVICE...........

COUVERTURE ARRIÈRE

W10096990A W10097007A - SP

DRYER SAFETY

2

Maytag W10097007A - SP, W10096990A User Manual

3

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Good air flow

Along with heat, dryers require good air flow to efficiently dry laundry. Proper venting will reduce your drying times and improve your energy savings. See “Installation Instructions.”

The venting system attached to the dryer plays a big role in good air flow.

Service calls caused by improper venting are not covered by the warranty and will be paid by the customer, regardless of who installed the dryer.

Maintain good air flow by:

nCleaning your lint screen before each load.

nReplace plastic or foil vent material with 4" (102 mm) diameter heavy, rigid vent material.

nUse the shortest length of vent possible.

nUse no more than four 90° elbows in a vent system; each bend and curve reduces air flow.

Good

Better

nRemove lint and debris from the exhaust hood.

nRemove lint from the entire length of the vent system at least every 2 years. When cleaning is complete, be sure to follow the “Installation Instructions” supplied with your dryer for final product check.

nClear away items from the front of the dryer.

USE SENSOR DRY/AUTOMATIC DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS

Use the SENSOR DRY/Automatic Dry cycles to provide the most energy savings and enhanced fabric care from the dryer. During SENSOR DRY/Automatic Dry cycles, drying air temperature or moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts off when the load reaches the selected dryness. The Energy Preferred cycle will provide optimal energy savings.

With Timed Dry, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due to over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time or when using the drying rack.

4

CONTROL PANEL & FEATURES

 

1

 

 

2

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Not all features and options are available on all models.

Appearance may vary.

1CYCLE KNOB

Use Cycle Knob to select available cycles on your dryer. Turn the knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.

TIMED DRY

Will run the dryer for the specified time on the control. On models with a selectable temperature knob, you may

choose a setting based on the fabrics in your load. On some models, temperature is included in the cycle selections. Drying time and temperature will depend on your dryer model.

SENSOR DRY/AUTOMATIC DRY

Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Gives the best drying in the shortest time. Drying time will vary based on fabric type, load size, and temperature setting.

WRINKLE PREVENT Feature (on some models)

The WRINKLE PREVENT feature will run after your drying cycle is complete. It periodically starts and stops the dryer, tumbling the load without heat to help avoid wrinkling.

On some models, WRINKLE PREVENT automatically starts at the end of the cycle. Opening the door will stop this feature.

NOTE: A signal will sound periodically when the WRINKLE PREVENT setting is selected, but only if the End of Cycle signal is also selected.

2TEMPERATURE / FABRIC

Select a drying temperature based on the fabrics in your load. If you are unsure of the temperature to select for a load, select the lower setting rather than the higher setting.

3PUSH TO START/END OF CYCLE SIGNAL

The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

Turn the END OF CYCLE SIGNAL knob to select the desired setting (On or Off). Press the PUSH TO START knob to start the dryer.

5

CYCLE GUIDE — SENSOR DRY/AUTOMATIC DRY CYCLES

SENSOR DRY/AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level. Choose ENERGY PREFERRED cycle for optimal energy savings.

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.

Items to dry:

Dryness Level:

Temperature

Available

Cycle Details:

 

 

Fabric:

Options:

 

 

 

 

 

 

Jeans, heavy work

More or Very Dry

High Heavy

End of Cycle Signal

Automatic cycles give the best drying in the

clothes, towels

Energy Preferred

or

Wrinkle Prevent

shortest time. Drying time varies based on

High Heat

 

Less Dry

 

fabric type, load size, and dryness setting.

 

 

 

Select a drying temperature based on the

 

 

 

 

 

 

 

 

fabrics in your load. If you are unsure of the

 

 

 

 

temperature to select for a load, select the

 

 

 

 

Work clothes, medium

More or Very Dry

Medium Casual

End of Cycle Signal

lower setting rather than the higher setting.

weight fabrics, sheets

Energy Preferred

or

Wrinkle Prevent

 

Low Heat

 

 

Less Dry

 

 

 

 

 

 

 

 

 

 

 

Casual, shirts, pants,

More or Very Dry

Low Delicate

End of Cycle Signal

 

lightweight items,

Energy Preferred

or

Wrinkle Prevent

 

Low Heat

 

synthetics, delicates,

Less Dry

 

 

athletic wear

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you like, select Less Dry next time you dry a similar load.

CYCLE GUIDE — TIMED DRY CYCLES

TIMED DRY - Will run the dryer for the specified time on the control.

Not all cycles and settings are available on all models.

Items to dry:

Cycle:

Temperature:

Available

Cycle Details:

 

 

 

Options:

 

 

 

 

 

 

Heavy or bulky

High Heat

High

End of Cycle Signal

Completes drying if items are still damp.

items

 

 

 

 

Any load

Freshen Up

Any

End of Cycle Signal

Use low to medium temperature to

 

 

 

 

smooth out wrinkles, such as those found

 

 

 

 

in clothes packed in a suitcase or in items

 

 

 

 

wrinkled from being left in the dryer too

 

 

 

 

long.

Rubber, plastic, heat

Timed Dry or

Air Fluff or

End of Cycle Signal

No heat drying.

sensitive fabrics

Air Fluff

No Heat

 

 

 

 

 

 

 

Setting the Drying Temperature

 

If your dryer has multiple heat settings:

Use the Air Fluff (no heat) setting for foam, rubber, plastic, or

 

 

A High Heavy temperature setting may be used for drying

heat-sensitive fabrics.

 

 

heavyweight items such as towels and work clothes.

Line dry bonded or laminated fabrics.

 

 

A Low Delicate to Medium Casual temperature setting may be

NOTE: If you have questions about drying temperatures for

 

 

used for drying medium-weight items such as sheets, blouses,

various loads, refer to the care label directions.

 

 

dresses, underwear, permanent press fabrics, and some knits.

 

 

 

 

 

 

 

 

 

 

6

USING YOUR DRYER

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this dryer.

Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping.

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen out of its holder. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Push the lint screen firmly back into place.

For additional cleaning information, see “Dryer Care”.

2. Load the dryer

Place laundry in the dryer. Close the door.

NOTE: Your model may have a different door than the one shown. Some models have drop down doors.

Do not tightly pack the dryer; clothes should be able to tumble freely.

7

3. Select the desired cycle

Select the desired cycle for your load. See the Cycle Guide for more information about each cycle.

SENSOR DRY/AUTOMATIC DRY Cycles

You can select a different dryness level, depending on your load, by turning the knob to dryness level.

Selecting Very or More Dry, Energy Preferred, or Less Dry automatically adjusts the dryness level of the fabrics at which the dryer will shut off.

SENSOR DRY/AUTOMATIC DRY cycles give the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting. Choose Energy Preferred for optimal energy savings. Less Dry removes less moisture and is used for loads you may want to put on a hanger to complete drying.

Very or More Dry removes more load moisture. Energy Preferred is used for a starting point for SENSOR DRY/AUTOMATIC DRY cycles.

4. Set temperature (on some models)

Select temperature by turning the knob to the desired position or select the Automatic Dry Cycle that has the temperature included in the cycle selections.

NOTE: Not all options and settings are available with all cycles.

TEMPERATURE / Fabric

Turn the TEMPERATURE / Fabric knob to change the drying temperature setting. See “Setting the Drying Temperature”.

5. Select End of Cycle Signal (if desired)

Turn the END OF CYCLE SIGNAL knob to select the desired setting (On or Off). The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

6. Press PUSH TO START to begin cycle

Push and hold the PUSH TO START knob to begin the cycle.

DRYING RACK

To purchase a drying rack for your dryer, please refer to “Assistance or Service” on the back cover of the manual or contact the dealer from whom you purchased your dryer.

Part Number

Accessory

3406839

Drying rack - fits 29" Super Capacity Plus

 

 

8

DRYER CARE

Cleaning the dryer location

Keep dryer area clear and free from items that would block the air flow for proper dryer operation. This includes clearing piles of laundry in front of the dryer.

Cleaning the dryer interior

To clean dryer drum

1.Apply a liquid, nonflammable household cleaner to the stained area of the drum and rub with a soft cloth until stain is removed.

2.Wipe drum thoroughly with a damp cloth.

3.Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry these items inside out to avoid drum staining.

Removing accumulated lint

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified servicer.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Cleaning the lint screen

Every load cleaning

The lint screen is located in the dryer. A screen blocked by lint can increase drying time.

To clean:

1.Pull the lint screen out of its holder. Roll lint off the screen with your fingers. Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

2. Push the lint screen firmly back into place.

IMPORTANT:

nDo not run the dryer with the lint screen loose, damaged, blocked, or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

nIf lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint. See “Venting Requirements.”

As needed cleaning

Laundry detergent and fabric softener residue can build up on the lint screen. This buildup can cause longer drying times for your clothes, or cause the dryer to stop before your load is completely dry. The screen is probably clogged if lint falls off while the screen is in the dryer.

Clean the lint screen with a nylon brush every 6 months, or more frequently, if it becomes clogged due to a residue buildup.

To wash:

1.Roll lint off the screen with your fingers.

2.Wet both sides of lint screen with hot water.

3.Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4.Rinse screen with hot water.

5.Thoroughly dry lint screen with a clean towel. Reinstall screen in dryer.

9

Loading...
+ 19 hidden pages