ASSISTANCE OR SERVICE |
.........................................................1 |
WASHER SAFETY....................................................................... |
2 |
WASHER USE............................................................................. |
3 |
WASHER CARE .......................................................................... |
4 |
TROUBLESHOOTING ............................................................... |
5 |
WARRANTY............................................................................... |
8 |
ASSISTANCE OU SERVICE........................................................ |
9 |
SÉCURITÉ DE LA LAVEUSE .................................................... |
10 |
UTILISATION DE LA LAVEUSE............................................... |
11 |
ENTRETIEN DE LA LAVEUSE................................................... |
12 |
DÉPANNAGE .......................................................................... |
13 |
GARANTIE............................................................................... |
16 |
Assistance or Service
Maytag Services, LLC
Attn: CAIR® Center
P.O. Box 2370
Cleveland, TN 37320-2370
In Canada, for assistance, installation and service, call
1-800-807-6777, visit our website at www.maytag.ca or write:
Whirlpool Canada LP
Customer Interaction Centre
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for inwarranty service.
Write down the following information about your appliance to help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial number. You can find this information on the model and serial number label, located under the washer lid.
Dealer name ____________________________________________________
Serial number ___________________________________________________
Address _________________________________________________________
Phone number ___________________________________________________
Model number ___________________________________________________
Purchase date ___________________________________________________
For more high-quality items or to order, call 1-800-901-2042, or visit us at www.maytag.com/accessories.
In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.
Part Number |
Accessory |
Part Number |
Accessory |
8212656RP |
10 ft (3.0 m) Inlet hose, Black EPDM (2 pack) |
8212641RP |
5 ft (1.5 m) Inlet hose, Black |
|
|
|
EPDM (2 pack) |
|
|
|
|
8212638RP |
6 ft (1.8 m) Nylon braided inlet hose, space-saving |
8212546RP |
4 ft (1.2 m) Inlet hose, Black |
|
90° elbow, hypro-blue steel couplings. (2-pack) |
|
EPDM (2 pack) |
|
|
|
|
8212487RP |
5 ft (1.5 m) Nylon braided inlet hose. (2-pack) |
8212526 |
Washer drip tray, fits under all |
|
|
|
|
8212637RP |
6 ft (1.8 m) Inlet hose, Black EPDM, space-saving |
31682 |
All purpose appliance cleaner |
|
90° elbow, hypro-blue steel couplings. (2-pack) |
|
|
W10092796B
Part Number |
Accessory |
Part Number |
Accessory |
|
|
|
|
8212545RP |
5 ft (1.5 m) Inlet hose, Red and Blue EPDM. |
1903WH |
Laundry supply storage cart |
|
(2-pack) |
|
|
|
|
|
|
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
DANGER
WARNING
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
2
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
■Load evenly to maintain washer balance. Mix large and small items. Items should move easily through the wash water.
■Load only to the top of the basket as shown. Overloading can cause poor cleaning.
NOTE: Follow the garment and the chlorine bleach manufacturers’ directions for proper use. Undiluted bleach will damage any fabric it touches. The damage appears as rips, holes, tears, or color loss and may not show up until several washings later. To avoid spilling, use a cup with a pouring spout. Do not let bleach splash, drip, or run down into the washer basket. Always measure liquid chlorine bleach. Do not guess. Do not use more than the manufacturer’s recommended amount for a full load. Use less with a smaller load size.
■Use only liquid chlorine bleach in this dispenser. Do not use this dispenser to add powdered chlorine or color-safe bleach to your wash load. Pour measured liquid chlorine bleach into the liquid chlorine bleach dispenser. Bleach is immediately fed into the washer and is diluted automatically during the wash part of the cycle.
■Dispensers on Timed Bleach models automatically dispense bleach at the proper time in the cycle for optimal performance, ensuring the cleanest and brightest loads.
|
H |
Style 1 |
Style 2 |
Liquid chlorine |
Dispenser for |
bleach dispenser |
Timed Bleach models |
(on some models) |
|
■Let the washer fill and begin agitating the load.
■Add bleach 5 minutes into the wash cycle for best cleaning and so that bleach can be removed in the rinse cycle. Pour bleach around the agitator, not directly onto the load to avoid damaging clothing or other items in the load.
NOTE: Do not spill or drip any fabric softener onto the clothes. Undiluted fabric softener can stain fabrics. Always dilute fabric softener with warm water. Using too much fabric softener can make some items (diapers and towels) nonabsorbent. If this happens, do not use it in every load, or use less of it in each load.
3
■Use only liquid fabric softener in this dispenser. Pour measured liquid fabric softener into the dispenser. Softener is added automatically during the rinse portion of the cycle. Dilute liquid fabric softener by filling the dispenser with warm water until liquid reaches the underside of the rim. See max fill line arrows.
■In the final rinse only, add fabric softener that has been diluted with ½ to 1 cup (125 to 250 mL) warm water.
■You may change the load size or water level selection after the washer has started filling by turning the selector to a different setting.
■On models with a variable Load Size or Water Level control, you should turn the knob to RESET, then to desired setting.
■Even in Cool wash, some warm water is let into the washer to maintain a minimum temperature of approximately 70ºF (21ºC).
Temperature Guide
Wash Temp |
Suggested Fabrics |
|
|
Hot |
Whites and pastels |
|
Durable garments |
|
Heavy soils |
|
|
Warm |
Bright colors |
|
Moderate to light soils |
|
|
Cool |
Colors that bleed or fade |
|
Light soils |
|
|
Cold |
Dark colors that bleed or fade |
|
Light soils |
NOTE: In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils can be difficult to remove. Some fabrics can retain wear wrinkles and have increased pilling (the formation of small lint-like balls on the surface of garments).
■Extra Rinse - Selecting this option provides a second rinse. An Extra Rinse can be added to any wash cycle.
■Cycle Signal - A tone will sound at the end of the cycle. The sound level cannot be adjusted.
■Extra Rinse & Cycle Signal - This option combines both a Extra Rinse and a Cycle Signal at the end of the wash cycle.
9.The Sensi-Care™ System (on some models) is an integrated set of controls which work together to provide optimal wash temperatures, agitation times, and agitation/spin speeds based on the Fabric Select setting. The controls provide higher wash temperatures for more aggressive, heavy-duty cycles and slightly lower temperatures on cycles for delicate and hand wash items, to provide better fabric care. The timer knob allows you to decrease agitation time for light soils and increase agitation time for heavy soils.
To stop or restart your washer:
■To stop the washer at any time, push in the Timer knob.
■To restart the washer, close the lid (if open) and pull out the Timer knob.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine bleach and enough detergent to equal twice the manufacturer’s recommended amount for a normal wash load. Pour this mixture into your washer and run it through a complete cycle using hot water. Repeat this process if necessary.
NOTE: Some models are equipped with a liquid fabric softener dispenser. To avoid damage to the washer or clothing, do not wash clothes with the liquid fabric softener dispenser removed or add detergent or bleach to this dispenser; it is for liquid fabric softener only.
4
1.Shut off both water faucets. Disconnect and drain water inlet hoses. Pour 1 qt (1 L) of R.V.-type antifreeze into the basket.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly avoid the cost of a service call
In U.S.A. www.maytag.com/help In Canada www.maytag.ca
■Is water deflecting off the tub ring or the load? Center the tub before starting the washer. The wash load should be balanced and not overloaded. The fill or spray rinses can deflect off the load. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See “Level the Washer.”
■Is the load balanced and the washer level? The wash load should be balanced and not overloaded. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See “Starting Your Washer.”
■Check household plumbing for leaks.
■Did you completely remove the yellow shipping strap with shipping pins? See “Remove Shipping Materials.”
■Are the gears engaging after the drain and before spin, or is the upper part of agitator clicking during wash? These are normal washer noises.
■Check the following:
■Is the sink or drain clogged? Sink and standpipe must be able to handle 17 gal. (64 L) of water per minute.
■Was the washer basket pulled forward during loading? Push the basket to the center before starting wash.
■Is the load balanced and the washer level? The wash load should be balanced and not overloaded. The washer must be level. The front feet should be properly installed and the nuts tightened. Reset the rear leveling legs (if needed). See “Level the Washer.”
■The washer basket moves while washing. This is normal.
■The top of the agitator is loose, or moves in only one direction.
This is normal.
5