Magnavox MDV560VR-17 User Manual

SMART. VERY SMART.

User guide

DIGITAL VIDEO DISC PLAYER

Read this manual first!

Congratulations on purchasing this Magnavox product.

We’ve included everything you need to get started.

If you have any problems, Magnavox Representatives can

help you get the most from your new product by explaining:

• Hookups,

• First Time Setup, and

• Feature Operation.

Do not attempt to return this product to the store.

For fast help, call us first!

1-800-705-2000

Thank you for making Magnavox a part of your home!

S

E

E

W

H

Y

I

N

S

I

D

E

I

M

P

O

R

T

A

N

T

!

Return

your Warranty

Registration Card

within 10 days

MDV560VR

VIDEO CASSETTE RECORDER

Once your MAGNAVOX purchase is registered,you’re eligible to receive all the privileges of owning a

MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once.And take advantage of these important benefits.

Return your W ar ranty Registration card today to

ensure y ou r eceive all the

benefits

you’ r e entitled to .

For Customer Use

Enter below the Serial No.which is

located on the rear of the cabinet.

Retain this information for future

reference.

Model No.____________________

Serial No. ____________________

Congratulations on your purchase,

and welcome to the “family!”

Dear MAGNAVOX product owner:

Thank you for your confidence in MAGNAVOX.You’ve selected

one of the best-built,best-backed products available today.And

we’ll do everything in our power to keep you happy with your

purchase for many years to come .

As a member of the MAGNAVOX “family,” you’re entitled to

protection by one of the most comprehensive warranties and

outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the

information and special offers for which you qualify,plus easy

access to accessories from our convenient home shopping

network.

And most importantly you can count on our uncompromising

commitment to your total satisfaction.

All of this is our way of saying welcome-and thanks for investing

in a MAGNAVOX product.

P.S. Remember, to get the most from your

MAGNAVOX product, you must return your

Warranty Registration Card within 10 days.So

please mail it to us right now!

Know these

safetysymbols

This “bolt of lightning” indicates

uninsulated material within your

unit may cause an electrical shock.

For the safety of everyone in your

household, please do not remove

product covering.

The “exclamation point” calls

attention to features for which

you should read the enclosed lit-

erature closely to prevent operating

and maintenance problems.

WARNING: TO PREVENT FIRE

OR SHOCK HAZARD, DO NOT

EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

CAUTION: To prevent electric

shock, match wide blade of plug to

wide slot,fully insert.

ATTENTION:Pour éviter les choc

électriques, introduire la lame la plus

large de la fiche dans la borne corre-

spondante de la prise et pousser

jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.



Warranty

Verification

Registering your product within

10 days confirms your right to

maximum protection under the

terms and conditions of your

MAGNAVOX warranty.

Owner

Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the event

of product theft or loss.

Model

Registration

Returning your Warranty Registration

Card right away

guarantees you’ll receive all the infor-

mation and special offers which you

qualify for as

the owner of your model.

Visit our World Wide Web Site at http://www.magnavox.com

Safety and General Information 3

Safety Precautions

Warning:To prevent fire or shock hazard,do not expose this equipment to rain or moisture.

Federal Communications Commission (FCC) Warning:Any unauthorized changes or modifications to this

equipment void the user’s authority to operate it.

Department of Health and Human Services (DHHS) Cer tification: Complies with 21 Center for

Radiation (CFR) chapter 1 subchapter J applicable at time of manufacture.

Laser Safety:This unit employs a laser. Only a qualified service person should remove the cover or attempt

to service this device, due to possible eye injury.

CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO

NOT STARE INTO BEAM.THE BEAM IS LOC ATED INSIDE,NEAR THE DECK MECHANISM.

Special Information for Canadian Users:This Class B digital apparatus complies with Canadian

ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio/TV Interference:This equipment has been tested and found to comply with the limits for a Class B

digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection

against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio

frequency energy and,if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications.However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,which

can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference

by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and the receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

Copyright Protection: Unauthorized copying,broadcasting, public performance and lending of Discs are

prohibited.This product incorporates copyright protection technology that is protected by method claims of

certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights

owners.Use of this copyright protection technology must be authorized by Macrovision Corporation and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.

Reverse engineering or disassembly is prohibited.

Note to the Cable TV System Installer: This reminder is provided to call the Cable TV system

installer’s attention to Article 820-40 of the National Electrical Code,which provides guidelines for proper

grounding – in particular, specifying that the cable ground shall be connected to the grounding system of the

building,as close to the point of cable entry as possible .

Declaration of Conformity

Model Number: MDV560VR

Trade Name: Magnavox

Responsible Party: Philips Consumer Electronics

P.O. Box 14810

Knoxville, TN 37914-1810

[phone]

Manufactured under license from Dolby Laboratories."Dolby","Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

"DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.

Copyright 2004 Magnavox. All rights reserved.

English

4 Table of Contents

General Information

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Disc Related Terms . . . . . . . . . . . . . . . . . . . . . . . . . .5

Types of video CDs . . . . . . . . . . . . . . . . . . . . . . . . . .5

Remote Control Battery Installation . . . . . . . . . . . . .5

Remote Control Operation Range . . . . . . . . . . . . . .5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Selecting the Viewing Source . . . . . . . . . . . . . . . . . . .6

Basic Controls

Front Panel Controls . . . . . . . . . . . . . . . . . . . . . .7

Display Window . . . . . . . . . . . . . . . . . . . . . . . . . .8

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .9

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Getting Started

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Connecting Antenna/Cable TV to DVD+VCR .11

Basic TV Connections . . . . . . . . . . . . . . . . . . .12-

Optional, Preferred TV Connections . . . . .12-13

Before VCROperation . . . . . . . . . . . . . . . . . . . .14-16

On-Screen Display (OSD) . . . . . . . . . . . . . . . .14

Setting the On-Screen Display . . . . . . . . . . . . .14

Setting the VCR Setup Menu . . . . . . . . . . . . . .15

Channel Selection . . . . . . . . . . . . . . . . . . . . . . .15

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . .16

Before DVDOperation . . . . . . . . . . . . . . . . . . .17-20

General Explanation . . . . . . . . . . . . . . . . . . . . .17

On-Screen Display . . . . . . . . . . . . . . . . . . . . . .17

Initial Settings . . . . . . . . . . . . . . . . . . . . . . .18-20

General Operation . . . . . . . . . . . . . . . . . . . . . . .18

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Parental Control . . . . . . . . . . . . . . . . . . . . . . . . .20

Operation

Tape Operation . . . . . . . . . . . . . . . . . . . . . . . . .21-25

Normal Playback . . . . . . . . . . . . . . . . . . . . . . .21

Special Effect Playbacks . . . . . . . . . . . . . . . . . . .21

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Still Picture and Frame-by-Frame Playback . . . . . .21

Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Normal Recording . . . . . . . . . . . . . . . . . . . . . .22

Timer Recording . . . . . . . . . . . . . . . . . . . . .22-23

Instant Timer Recording . . . . . . . . . . . . . . . . . .24

Dubbing and Editing . . . . . . . . . . . . . . . . . . . . .24

Copying from DVD to VCR . . . . . . . . . . . . . . .24

VHS Hi-Fi Stereo System/MTS Broadcast . . . . .25

Tape Counter Memory Feature . . . . . . . . . . . .26

Additional Information . . . . . . . . . . . . . . . . . . .26

DVD and Video CD Operation . . . . . . . . . . . .27-29

Playing DVDs and Video CD . . . . . . . . . . . . . .27

General Features . . . . . . . . . . . . . . . . . . . . . . .27

Moving to another TITLE . . . . . . . . . . . . . . . .27

Moving to another CHAPTER/TRACK . . . . . . .27

Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .27

Still Picture and Frame-by-Frame Playback . . .28

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .28

Time Search . . . . . . . . . . . . . . . . . . . . . . . . .28

3DSurround . . . . . . . . . . . . . . . . . . . . . . . . .28

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Marker Search . . . . . . . . . . . . . . . . . . . . . . .29

Special DVD Features . . . . . . . . . . . . . . . . . . .29

Checking the contents of DVD Video discs:Menus 29

Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29

Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . .29

Camera Angle . . . . . . . . . . . . . . . . . . . . . . . .29

Changing the Audio Language . . . . . . . . . . . .29

Changing the Audio Channel . . . . . . . . . . . . . .29

Operation with Audio CD and MP3/WMA Disc . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-31

Playing an Audio CD and MP3/WMA Disc . . .30

Notes on MP3/WMA Recordings . . . . . . . . . .30

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Moving to another Trac k . . . . . . . . . . . . . . . .31

Repeat Track / All / Off . . . . . . . . . . . . . . . . .31

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . .31

3DSurround . . . . . . . . . . . . . . . . . . . . . . . . .31

Changing the Audio Channel . . . . . . . . . . . . .31

Operation with JPEG Disc . . . . . . . . . . . . . . . . . .32

Viewing a JPEGdisc . . . . . . . . . . . . . . . . . . . . .32

Moving to another File . . . . . . . . . . . . . . . . . .32

Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . .32

To flip the picture . . . . . . . . . . . . . . . . . . . . .32

To rotate picture . . . . . . . . . . . . . . . . . . . . . .32

Notes on JPEG Recordings . . . . . . . . . . . . . . .32

Programmed Playback . . . . . . . . . . . . . . . . . . . . .33

Programmed Playback with Audio CD and MP3/

WMA Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Programmed Playback with Video CD . . . . . . .33

Repeat Programmed Tracks . . . . . . . . . . . . . .33

Erasing a Trac k from Program List . . . . . . . . .33

Erasing the Complete Program List . . . . . . . . .33

Additional Information - DVD . . . . . . . . . . . . . . .34

Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Last Condition Memory . . . . . . . . . . . . . . . . . .34

Video Mode Setting . . . . . . . . . . . . . . . . . . . . .34

Troubleshooting . . . . . . . . . . . . . . . . . .35-36

Language Code List . . . . . . . . . . . . . . . .37

Country Code List . . . . . . . . . . . . . . . . . .38

Specifications . . . . . . . . . . . . . . . . . . . . . . .39

English

General Information 5

Playable Discs

DVD

(8 cm/12 cm disc)

Video CD (VCD)

(8 cm / 12 cm disc)

Audio CD

(8 cm/12 cm disc)

In addition, this unit can play a SVCD, Kodak PICTURE CD,

and CD-R/RW, DVD-R/±RW that contains audio titles, MP3,

JPEG or WMA files.

Notes

– Depending on the conditions of the recording

equipment or the CD-R/RW (or DVD-R/±RW) disc itself,

some CD-R/RW (or DVD-R/±RW) discs cannot be played

on the unit.

– The unit cannot play discs that contain data other than

MP3 and CD-DA data.

– Do not attach any seal or label to either side

(the labeled side or the recorded side) of a disc.

– Do not use irregularly shaped CDs (e.g., heart-shaped or

octagonal). The unit may malfunction.

DVDs and Video CDs

Some playback operations of DVDs and Video CDs may be

intentionally fixed by software manufacturers. As this unit

plays DVDs and Video CDs according to disc content

designed by the software manufacturer, some playback fea-

tures of the unit may not be available or other functions may

be added.

Refer also to the instructions supplied with the DVDs and

Video CDs. Some DVDs made for business purposes may

not be played on the unit.

Regional code of this DVD+VCR and DVDs

This DVD+VCR is designed and manufactured for playback of

Region 1 encoded DVD software. The region code

on the labels of some DVD discs indicate which type

of DVD+VCR can play those discs. This unit can play

only DVD discs labeled 1 or ALL. If you try to play

any other discs, the message “Check Regional Code” will

appear on the TV screen. Some DVD discs may not have a

region code label even though their playback is prohibited by

area limits.

DTS-encoded CDs

When playing DTS-encoded CDs, excessive noise may be

exhibited from the analog stereo output. To avoid possible

damage to the audio system, turn down the volume before

playing back such discs, adjust the volume gradually, and

keep the volume level low. To enjoy DTS Digital Surround

TM

playback, an external 5.1 channel Digital Surround

TM

decoder

system must be connected to the digital output of the unit.

Disc-related Terms

Title (DVD only)

The main film content, title or accompanying feature content

or music album.

Each title is assigned a title reference number enabling you

to locate it easily.

Chapter (DVD only)

Sections of a picture or a musical piece that are smaller than

titles. A title is composed of one or several chapters. Each

chapter is assigned a chapter number to enable you to locate

the chapter you want. Depending on the disc, chapters may

not be recorded.

Track (Video CD and audio CD only)

Sections of a picture or a musical piece on a video CD or an

audio CD. Each track is assigned a track number, enabling

you to locate the track you want.

Scene

On a video CD with PBC (Playback control) functions, mov-

ing pictures and still pictures are divided into sections called

“Scenes”. Each scene is displayed in the menu screen and

assigned a scene number, enabling you to locate the scene

you want.

A scene is composed of one or several tracks.

Types of video CDs

There are two types of video CDs:

Video CDs equipped with PBC (Version 2.0)

PBC (Playback control) functions allow you to interact with

the system via menus, search functions, or other typical

computer-like operations. Moreover, still pictures of high

resolution can be played if they are included in the disc.

Video CDs not equipped with PBC (Version 1.1)

Operated in the same way as audio CDs, these discs allow

playback of video pictures as well as sound, but they are not

equipped with PBC.

Remote Control Battery

Installation

Detach the battery cover on the rear of the

remote control, and insert two R06 (size AA)

batteries with and aligned

correctly.

Caution

Do not mix old and new batteries. Never mix different types

of batteries (standard, alkaline, etc.).

Remote Control Operating Range

Point the remote control at the remote sensor and press

the buttons.

"

Distance: About 23 ft (7 m) from the front of the

remote sensor

"

Angle: About 30° in each direction of the front of the

remote sensor

1

AAA

AAA

English

6 General Information

Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials come in

handy. For maximum protection, re-pack the unit as it was

originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio may

be distorted during playback. In this case, position the unit

away from the TV, VCR, or radio, or turn off the unit after

removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near

the unit. Do not leave rubber or plastic products in contact

with the unit for a long period of time. They will leave marks

on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use

a soft cloth lightly moistened with a mild detergent solution.

Do not use strong solvents such as alcohol, benzine, or thin-

ner, as these might damage the surface of the unit.

To obtain a clear picture

The DVD+VCR is a high-tech, precision device. If the optical

pick-up lens and disc drive parts are dirty or worn, the pic-

ture quality will be poor.

Regular inspection and maintenance are recommended after

every 1,000 hours of use. (This depends on the operating

environment.)

For details, please contact your nearest dealer.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not get

on the surface.

Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat,

or leave it in a parked car exposed to direct sunlight, as

there may be a considerable temperature increase inside the

car.

Cleaning discs

Fingerprints and dust on the disc can cause poor picture

quality and sound distortion. Before playing, clean the disc

with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner,

commercially available cleaners, or anti-static spray intended

for older vinyl records.

About Symbols

About the symbol display

“ ” may appear on the TV screen during operation. This

icon means the function explained in this owner’s manual is

not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbols are

applicable only to those discs represented by the symbol.

DVDs

Video CDs with the PBC (playback control) func-

tion.

Video CDs without the PBC (playback control)

function.

Audio CDs.

MP3 Discs.

WMA Discs.

JPEG Discs.

JPEG

WMA

MP3

CD

VCD1.1

VCD2.0

DVD

Yes No

Selecting the Viewing Source

You must select one of your output sources (DVD or

VCR) to view on the TV screen.

• If you want to view DVD deck output source:

Press DVD on the remote or DVD/VCR on the front panel. DVD

indicator in the display window lights and output source of DVD

deck is viewed on the TV screen.

• If you want to view VCR deck output source:

Press VCR on the remote or DVD/VCR on the front panel. VCR

indicator in the display window lights and output source of VCR

deck is viewed on the TV screen.

Notes

• If you insert a disc while the DVD+VCR is in the VCR

mode, the DVD+VCR will switch to DVD mode

automatically.

• If you insert a cassette tape without prevention tab while

the DVD+VCR is in the DVD mode, the DVD+VCR will

switch to VCR mode automatically.

English

Basic Controls 7

PAUSE (

XX

)

Pause playback of a disc in the DVD

deck temporarily. Press repeatedly for

frame-by-frame playback.

IMPORTANT

Child Lock Feature Notice

The control buttons on the front panel of the

DVD+VCR can be switched off so that your

DVD+VCR can only be operated using the remote

control.

Press C.(Child)LOCK on the remote control to turn

on the LOCK function, SAFE appears in the

display window.

To cancel the LOCK function, press C.LOCK on the

remote control until OFF drops from the

display window.

OPEN/CLOSE (

ZZ

)

Opens or closes the disc tray.

Remote Sensor

Point the DVD+VCR remote con-

trol here.

Display window

Shows the current status of the

DVD+VCR.

Disc Tray (DVD deck)

Insert a disc here.

STANDBY ON

Switches the DVD+VCR ON and OFF.

DVD indicator

Indicates the DVD deck is active.

SOURCE, DVD/VCR

(output select)

Sets the output source of

the player to DVD or VCR.

RECORD (

zz

)

To record normally or to activate

Instant Timer Recording.

CHANNEL (

VV//vv

)

To scan up or down through memorized

channels.

PLAY ( N )

Starts playback of a disc or tape.

STOP (

xx

)

Stops playback of disc or tape.

VIDEO IN/AUDIO IN (Left/Right)

Connect the audio/video output of an external

source (Audio system, TV/Monitor, VCR).

Cassette Compartment

(VCR deck)

Insert a video cassette here.

VCR EJECT (

ZZ

)

Ejects the tape in the

VCR deck.

F.FWD (

M

)

DVD: Go to NEXT chapter/track. Press

and hold for fast forward search.

VCR: Advances the tape from STOP mode

or for fast forward picture search.

REW (

m

)

DVD: Go to beginning of current chapter/track

or to previous chapter/track.

Press and hold for fast reverse search.

VCR: Rewinds the tape from STOP mode or

for fast reverse picture search.

VCR indicator

Indicates the VCR deck is

active.

D.DUBBING

Copies a DVD in the DVD deck to a

VHS tape in the VCR deck.

Front Panel Controls

English

8 Basic Controls

DVD

VCR

REC

PM

TV

[P]

A timer recording is programmed or in progress

(VCR deck only).

A cassette is in the VCR deck.

The VCR deck is selected.

DVD+VCR is Recording.

(VCR deck only)

Indicates PM time. (AM is not displayed.)

Lights when TV mode is active (See page 22.)

Lights when a disc is loaded in the DVD

deck. Flashes when there is no disc.

Indicates when Progressive scan is active.

Indicates when the DVD+VCR is locked.

Indicates total playing time, elapsed time, remaining time or

current deck status (Playback, Pause, etc).

The DVD deck is selected.

Indicates repeat mode.

Display Windo w

English

Basic Controls 9

Note

The remote control uses one set of playback buttons to operate both DVD and

VCR decks:

To use the VCR, first press the VCR button.

To use the DVD, first press the DVD button.

OPEN/CLOSE, EJECT

- Opens and closes the disc tray.

- Ejects the tape in the VCR deck.

0-9 number buttons

"

Selects channels or menu items.

RETURN

"

Exits the setup menu.

DISPLAY

"

Shows the on-screen display.

Switches among the clock, tape counter and

tape remaining modes on the display.

SUBTITLE

"

Selects available subtitle languages.

ANGLE

"

Selects a DVD camera angle if

available.

ZOOM

"

Magnifies video image.

AUDIO

"

Selects DVD audio languages or CD audio

channels (Stereo/Left/Right).

STOP ( x )

"

Stops playback.

PLAY ( N )

Starts playback.

PAUSE/STEP ( ]] )

"

Pauses playback or recording

temporarily. Press repeatedly for frame-by-

frame playback.

REC/ITR

"

Records normally or starts Instant Timer

Recording.

b/Bv/V (left/right/up/down)

- Selects menu items

-

v/V

: Selects channels on the VCR.

OK

-

Confirms menu selections.

- Displays functions on the TV screen.

MARKER

"

Marks any point during playback.

SEARCH

"

Displays MARK SEARCH menu.

REPEAT

"

Repeats chapters, tracks, titles or all.

REPEAT A-B

"

Repeats playback between two points.

POWER

Turns the DVD+VCR ON and OFF.

TV Control Buttons

- CH +/–: Selects TV channels.

- TV VOL +/–: Adjusts TV volume.

TV/VCR

Switches between your TV tuner and the

DVD+VCR tuner.

DVD select button

Sets the remote control to operate the

DVD deck.

VCR select button

Sets the remote control to operate the

VCR deck.

INPUT

Selects the VCR deck’s source (Tuner, LINE

1, or LINE 2).

"

.

DVD: Skips to start of current chapter/track

or to previous chapter/track. Press and hold

for fast reverse search.

VCR: Rewinds the tape during Stop mode or

scans backward in Play mode

.

"

>

DVD: Skips to NEXT chapter/track. Press

and hold for fast-forward search.

VCR: Fast forwards the tape during Stop

mode or scans forward in Play mode.

"

C.LOCK

Disables front panel buttons.

"

SPEED

Selects recording speed

DISC/MENU

Opens menu on a DVD disc.

SYSTEM/MENU

Opens or exits DVD setup menu and VCR

menu.

"

PROGRAM

Selects or exits Program menu.

"

CLEAR

Removes a track number on the

Program menu or a mark on the MARK

SEARCH menu. Also clears VCR tape

counter settings.

"

TITLE

Displays the disc’s Title,

if available.

"

SHUFFLE

- Plays tracks in random order.

Remote Control

English

10 Basic Controls

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/Monitor,

another VCR).

ANT.IN (ANTENNA INPUT)

Connect the VHF/UHF/CATV antenna to this terminal.

DVD/VCR OUT (VIDEO/AUDIO (Left/Right))

Connect to a TV with video and audio inputs.

AUDIO OUT (Left/Right) (DVD OUT)

Connect to a TV, amplifier, receiver, or stereo system.

AC Power Cord

Plug into the power source.

S-VIDEO OUT (DVD OUT)

Connect to a S-Video Input on TV.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD

OUT)

Connect to a TV with Y Pb Pr inputs.

RF. OUT(DVD/VCR OUT)

Connect to a TV with RF coaxial inputs.

DIGITAL AUDIO OUT (COAXIAL) (DVD

OUT)

Connect to digital (coaxial) audio equipment.

Rear Panel

English

Getting Star ted 11

Connections

Tips

"

Depending on your TV and other equipment, there are various

ways you could connect the DVD+VCR. Use connections

described on pages 11-13.

"

Please refer to the manuals of your TV, VCR, Stereo System or

other devices as necessary to make the best connections.

"

For better sound reproduction, connect the DVD+VCR’s

DVD/VCR AUDIO OUT jack to the audio in jacks of your ampli-

fier, receiver, stereo or audio/video equipment. See “Optional,

Preferred TV Connections” on pages 12-13.

Caution

"

Make sure the DVD+VCR is connected directly to the TV. Tune

the TV to the correct video input channel.

"

Do not connect the DVD+VCR’s DVD/VCR AUDIO OUT jack

to the phono in jack (record deck) of your audio

system.

"

Do not connect your DVD+VCR via your VCR. The DVD image

could be distorted by the copy protection system.

Connecting Antenna/Cable TV to

DVD+VCR

11

Disconnect the antenna leads from the rear of the TV.

22

Identify the type of cable from your antenna. If it is a

round cable as illustrated, it is a 75 ohm coaxial antenna

cable. This cable will connect directly to the jack

marked ANT.IN on your DVD+VCR.

Tip

If your antenna lead wire is a flat type antenna cable, connect

it to a Antenna Adaptor (300-ohm to 75-ohm) (not supplied)

and slip the Adaptor onto the ANT.IN jack. The Adaptor

does not screw on to the DVD+VCR, it just slips over the

jack.

Without Cable Box

If your cable wire is connected to your TV without a converter or

descrambler box, unscrew the wire from your TV and attach it to

the ANT.IN jack on the DVD+VCR. Use the supplied round coaxial

cable to connect between the DVD+VCR’s RF.OUT jack and the 75

ohm antenna input jack on the TV. With this connection, you can

receive all midband, super band, and hyperband channels.

With Cable Box

If a converter is required in your cable system, follow the instruc-

tion below:

The cable hookup permits both TV and DVD+VCR operation.

To view or record CATV channel

1 Tune the TV to the DVD+VCR output channel (CH 3 or 4).

2 Set the DVD+VCR channel selector to the output channel of the

Cable Converter box by using the CHANNEL (v/V)or number

(0-9) of your DVD+VCR. (Example: CH3)

3 Select the channel to view at the Cable Converter Box.

Notes

" With this connection, you CANNOT record one program while

viewing another.

" If you are using a cable box to tune channels, it is not necessary

to do Auto Channel Set as indicated on page 15.

English

12 Getting Star ted

Basic TV Connections

"

Make one of the following connections, depending on the

capabilities of your existing equipment.

RF coaxial connection

Connect the RF.OUT jack on the DVD+VCR to the

Antenna In jack on the TV using the supplied 75-ohm

Coaxial Cable (R).

Note

If you use this connection, tune the TV to the DVD+VCR’s

RF output channel (CH 3 or 4).

How to set the DVD+VCR’s RF output channel

1.Set the TV to the VCR channel (3 or 4) depending upon

the selected channel.

2.When the DVD+VCR is turned off,

press and hold

CHANNEL (V/v) on the front panel for about five sec-

onds.

It will turn itself on and “RF03” or “RF04” appears in the display

window.

3.

Press CHANNEL (V/v) on the front panel or v/V on the

remote control to change the RF output channel (CH 03

or CH 04).

4.

Turn off the DVD+VCR.

Audio/Video connection

11

Connect the DVD/VCR VIDEO OUT jack on the

DVD+VCR to the Video In jack on the TV using the

supplied video cable (V).

22

Connect the Left and Right DVD/VCR AUDIO OUT

jacks on the DVD+VCR to the Audio Left/Right In jacks

on the TV (A1) using the supplied audio cables.

Note

If you use this connection, set the TV’s source selector to

VIDEO.

Optional, Preferred TV Connections

Note

You can watch and listen to DVD playback also through the

connections shown below.

S-Video connection

11

Connect the S-VIDEO OUT jack on the DVD+VCR to

the S-Video In jack on the TV using an optional S-Video

cable (S).

22

Connect the Left and Right AUDIO OUT jacks of the

DVD+VCR to the Audio Left/Right In jacks on the TV

using the supplied audio cables (A2).

Component Video / Progressive Scan connection

""

If your television is a high-definition or “digital ready” tel-

evision, you may take advantage of the DVD+VCR’s pro-

gressive scan output for the highest video resolution pos-

sible.

""

If your TV does not accept the Progressive Scan format,

the picture will appear scrambled if you try Progressive

Scan on the DVD+VCR.

11

Connect the COMPONENT / PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD+VCR to the correspon-

ding In jacks on the TV using an optional Y Pb Pr cable

(C).

22

Connect the Left and Right AUDIO OUT jacks of the

DVD+VCR to the Audio Left/Right In jacks on the TV

(A2) using the supplied audio cables.

Notes

" Set Progressive Scan to “On” in the setup menu for pro-

gressive scan signal, see page 18.

" When you use Composite Video signal, set Progressive

Scan to “Off” in the setup menu.

" If you accidentally set Progressive Scan to ON (within

Analog TV), press STOP 9 for five seconds to restore the

picture to normal operation.

English

Getting Star ted 13

Optional, Preferred TV Connections

(Continued)

Note

You can listen to DVD playback using COAXIAL (X) and

AUDIO OUT (A2) connections. The tuner and VCR will

still be heard through the RF.OUT (R) or DVD/VCR

AUDIO OUT (A1) jacks. (See page 12.)

Connecting to an amplifier equipped with two chan-

nel analog stereo or Dolby Surround

Connect the Left and Right AUDIO OUT (or DVD/VCR

AUDIO OUT) jacks on the DVD+VCR to the Audio Left

and Right In jacks on your amplifier, receiver, or stereo sys-

tem using the supplied audio cables (A1, A2).

Connecting to an amplifier equipped with two chan-

nel digital stereo (PCM) or to an Audio/Video receiv-

er equipped with a multi-channel decoder (Dolby

Digital™, MPEG 2, or DTS)

11

Connect one of the DVD+VCR’s DIGITAL AUDIO

OUT jacks (COAXIAL X) to the corresponding In jack

on your amplifier. Use an optional digital (coaxial X)

audio cable.

22

You will need to activate the DVD+VCR’s digital out-

put. (See “Digital Audio Output” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound

quality. For this you need a multi-channel Audio/Video

receiver that supports one or more of the audio formats

supported by your DVD+VCR (MPEG 2, Dolby Digital and

DTS). Check the receiver manual and the logos on the front

of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will

be in DTS digital out when DTS audio stream is selected.

Notes

–

If the audio format of the digital output does not match the

capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– Six Channel Digital Surround Sound via digital

connection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder.

– To see the audio format of the current DVD with the

on-screen display, press AUDIO.

Accessory Audio/Video (A/V) Connections to

DVD+VCR

Connect the VCR IN LINE 1 or AV INPUT jacks on the

DVD+VCR to the Audio/Video Out jacks on your

accessory component, using the optional audio/video cables.

English

14 Getting Star ted

Before VCR Operation

On-Screen Display (OSD)

The On-Screen display provides feedback on the current sta-

tus of the DVD+VCR.

❶❷ ❸ ❹ ❺

❻❼

❶TAPE SPEED DISPLAY

Shows the current tape speed.

❷FUNCTION DISPLAY

Indicates playback function status.

❸HI-FI DISPLAY

Indicates when unit is playing back tape recorded in Hi-Fi.

❹CHANNEL DISPLAY

I

ndicates the selected channel (or LINE1, LINE2 input mode).

❺STEREO/SAP DISPLAY (MONO is not displayed)

Shows the type of audio signal received by the VCR tuner.

❻DATE DISPLAY

Shows the current date.

❼CLOCK/COUNT/REMAIN DISPLAY

Shows the current time, tape counter and remaining time on the

tape.

Each press of the OK button changes the TV screen in the

following sequence.

Notes

" Function displays remain on the TV screen for 5 seconds.

" Clock (or tape counter, tape remaining) mode will continue until

you press OK.

" Tape counter and remaining tape length indicator appear only

when a cassette is inserted. Also, the remaining tape length indica-

tor appears after any tape operation.

EASY INFORMATION

If Extended Data Service (XDS) signals are provided along

with normal TV signals in your area (or with playback of a

tape recorded with Extended Data Service (XDS) signals),

the station ID, program title and program details are shown

on the TV screen.

When viewing a channel with Extended Data Service (XDS) sig-

nals, press OK and the station ID will appear on the TV screen.

Press OK again to view program details, etc.

When viewing a tape recorded with Extended Data Service

(XDS) signals, press

OK

twice and the program title and

program details will appear on the TV screen.

PROGRAM DETAILS

LENGTH: Indicates the run length of a program.

TIME REMAINING: Indicates the remaining time of a

program.

RATING: Indicates the rating of the current program (N/A,

G, PG, PG-13, R, NC-17, X and Not Rated). The rating N/A

means that the motion picture ratings are not applicable to

this program.

Setting the On-Screen Display

The VCR's on-screen menu system allows you to set the

clock, channels, timer recordings, and other setup options.

Menu Selection

Follow these steps to access the VCR's on-screen menu

system.

11

Press SYSTEM MENU and the MAIN menu will

appear.

22

Select the desired menu using the v/V buttons

and then press

OK

.

Note

Menus remain on-screen for 3 minutes.

33

Press SYSTEM MENU when finished.

PLAY HI-FI CH 4

SP STEREO

OCT 8 , FRI 2:15 PM

REM 1:58

0:35:40

2:15 PM

STOP CH 4

SP STEREO

OCT 8 , FRI 2:15 PM

Easy Information Screen

(Program details)

Easy Information Screen

(Station ID)

CH 4

SP WABC STEREO

“Home video”

OCT 8 , FRI 2:15 PM

PROGRAM DETAILS

“Home video”

LENGTH 01:00

TIME REMAINING 00:26

RATING N/A

CLOCK SET (page 16)

PROGRAM (page 22)

TUNING (page 15)

SETUP (page 15)

MAIN MENU

English

Getting Star ted 15

Setting the VCR Setup Menu

11

Press SYSTEM MENU and the MAIN menu will

appear.

22

Press

vv

/

VV

to select the SETUP menu, then press

OK.

The SETUP menu will appear.

33

Press

vv

/

VV

to choose a desired option on the

SETUP menu. Then press

bb

/

BB

to choose a

desired setting.

FUNCTION OSD

The on-screen display of this DVD+VCR can be turned on or off.

" FUNCTION OSD can be switched between ON and OFF by

pressing b/B.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the high

quality VHS Hi-Fi system and standard NORMAL mono system. The

same audio is generally recorded on both systems. The VHS Hi-Fi

system plays on separate (Left and Right) channels, and the NOR-

MAL system plays monaural sound. The normal track is always

played so the cassette can be played on a DVD+VCR that does not

have VHS Hi-Fi.

" AUDIO MODE can be switched between HI-FI and

NORMAL by pressing b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second

Audio Program (SAP) bilingual signals. Set this display to the desired

position when both MTS stereo and SAP signals are received. When

only one MTS signal is received, the DVD+VCR automatically selects

the corresponding receiving mode (Stereo or SAP) regardless of the

selected position. For normal operation, the display should be in the

STEREO position.

The DVD+VCR will then record a STEREO program

when available, and record a mono program IF the program is NOT IN

STEREO.

For weak STEREO and/or SAP broadcasts, changing the display to

mono may give clearer sound.

" BROADCAST TYPE can be switched between STEREO, SAP, and

MONO by pressing b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE-HI-FI/NORMAL is in

HI-FI position] for selecting the audio output signals from the

AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo position, so

that when a stereo tape is played, the stereo sound will be heard

through the left and right channels. If a mono tape is played and the

audio output is set to stereo, the same mono sound will be heard

from both left and right channels.

" AUDIO OUTPUT can be switched between STEREO, LEFT, and

RIGHT by pressing b/B.

44

Press SYSTEM MENU when finished.

Channel Selection

This DVD+VCR is equipped with a frequency synthesized

tuner capable of receiving up to 181 channels. These include

VHF channels 2-13, UHF channels 14-69 and CATV channels

1-125.

Preparation:

"

Connect the DVD+VCR to the desired type of antenna or cable

TV system, as shown in Connecting Antenna/Cable TV to

DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

11

Press SYSTEM MENU and the MAIN menu will

appear.

22

Press

vv

/

VV

to select the TUNING menu, then

press OK.

The TUNING menu will appear.

33

Press

VV

to choose the SOURCE SELECT option,

then press

bb

/

BB

to select TUNER.

Press b/B repeatedly to switch among TUNER, LINE1 and

LINE2.

44

Press

vv

/

VV

to choose the AUTO CHANNEL SET

option, then press

bb

/

BB

to set the channel.

The tuner will automatically cycle through all

available channels in the area and place them in the

tuner’s memory.

• After AUTO CHANNEL SET is complete, the TUN-

ING menu will close and return to the TV screen auto-

matically.

55

Make sure the TUNING BAND is set appropri-

ately (TV or CATV).

•

TV : If you are using a standard antenna to receive chan-

nels.

CATV : If you are using basic cable to receive channels.

66

Use CHANNEL (+/–) on the remote control or

CHANNEL (

VV//vv

) on the front panel of the

DVD+VCR to cycle through the channels in

memory.

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from mem-

ory manually.

1 Press

VV

to choose the CH. ADD/DEL option on the

TUNING menu. Press b/B to select a channel to add or

erase.

2 Press OK to add or erase the channel.

Repeat steps 1 and 2 to add or erase channels.

3 Press MENU to return to the TV screen.

English

16 Getting Star ted

Setting the Clock

The DVD+VCR gives you two ways to set the time and date:

the Auto Clock Feature or manually. The Auto Clock Feature

enables the DVD+VCR to set the clock when the DVD+VCR

is turned off.

Auto Clock Set

The Auto Clock Set feature is set to ON at the factory. In the ON

setting, the DVD+VCR looks for a channel carrying XDS (Extended

Data Services) information. XDS updates the clock using the

Coordinated Universal Time.

The Auto Clock Feature enables the DVD+VCR to set up the

clock when the DVD+VCR is turned off.

11

Press SYSTEM MENU and the MAIN menu will

appear.

22

Press

vv

/

VV

to choose the CLOCK menu.

Press OK and the CLOCK menu will appear.

33

Press

VV

to choose the AUTO CLOCK SET option.

Press

bb

/

BB

to choose ON.

The Auto Clock Set feature is set to ON at the factory. In the

ON setting, the DVD+VCR looks for a channel

carrying XDS (Extended Data Services) information. XDS

updates the clock using the Coordinated Universal Time.

44

Press V to choose the DAYLIGHT SAVINGS

item.

Press b/B to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the DST

information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the Daylight

Saving Time starts and ends.

55

Press V to choose the TIME ZONE item.

Press b/B to choose the correct time zone

(AUTO, EASTERN, CENTRAL, MOUNTAIN,

PACIFIC, ALASKA, or HAWAII).

If “AUTO” is selected as the time zone, the VCR sets the clock

using the first Coordinated Universal Time information when it

finds a proper broadcast signal.

66

Press MENU when finished.

77

Turn off the DVD+VCR and Auto Clock is set to

work (if selected in step).

Note

There are cases where the TV station does not send out or correct

date/time information for the DVD+VCR to set itself.

If this happens we recommend that you set the clock manually.

Manual Clock Set

1

Press SYSTEM MENU and the MAIN menu will

appear.

22

Press

vv

/

VV

to choose the CLOCK menu.

Press OK and the CLOCK menu will appear.

33

Press

bb

/

BB

to choose the month.

44

Press

VV

to choose the DAY option.

Use

bb

/

BB

to choose the day.

The day of the week will display automatically.

55

Press

VV

to choose the YEAR option.

Use

bb

/

BB

to choose the year.

66

Press

VV

to choose the TIME option.

Use

bb

/

BB

to choose the time.

77

Press V to choose the DAYLIGHT SAVINGS

item.

Press b/B to choose AUTO, ON or OFF.

If you choose AUTO, the VCR sets the clock using the DST

information broadcast in the signal (channel).

If you choose ON, the VCR sets the clock when the Daylight

Savings Time starts and ends.

88

Press MENU when finished.

Note

If setting the clock manually, “AUTO CLOCK SET” must be

set to “OFF”.

If set to “ON”, an incorrect date and/or time will be entered

again when the DVD+VCR is turned off.

"

The clock uses the 12-hour system. (Be sure to set AM and PM

correctly.)

"

The initial Clock Setting is JANUARY 1, 2004, 12:00 AM.

Things to know before starting

2004

2004

2004

English

Getting Star ted 17

Before DVD Operation

General Explanation

This manual gives the basic instructions for operating the

DVD+VCR. Some DVDs require specific features or allow

only limited operation during playback. When this occurs,

the symbol appears on the TV screen. This shows that

the operation is not permitted by the DVD+VCR or is not

available on the disc.

On-Screen Display

The general playback status can be displayed on the TV

screen. Some options can be changed on the menu.

On-screen display operation

11

Press DISPLAY during playback.

22

Use

vv

/

VV

to select an option.

The selected option will be highlighted.

33

Use

bb

/

BB

to change the setting of an option.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions, press

OK to set the option.

Temporar y Feedback Field Icons

Repeat Title(DVD)

Repeat Chapter(DVD)

Repeat Track (non-PBC Video CDs only)

Repeat All Tracks (non-PBC Video CDs only)

Repeat A-B

Repeat Off

Resume play from this point

Selected action prohibited or not available

Notes

" Some discs may not provide all of the features on the on-

screen display example shown below.

" If no button is pressed for 10 seconds, the on-screen dis-

play disappears.

OFF

A B

ALL

TRACK

CHAPT

TITLE

Options

Title Number

Chapter Number

Time search

Audio language

and Digital Audio

Output mode

Subtitle language

Angle

Sound

Function (Use

vv

/

VV

to select desired option)

Shows the current title number and total number of

titles, and skips to the desired title number.

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

Shows the elapsed playing time, and

searches the point by the elapsed time directly.

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

Shows the current subtitles language, and

changes the setting.

Shows the current angle number and total number of

angles, and changes the angle number.

Shows the current sound mode, and

changes the setting.

Selection Method

bb

/

BB

,or

Numeric, OK

bb

/

BB

,or

Numeric, OK

Numeric, OK

bb

/

BB

, AUDIO

bb

/

BB

, SUBTITLE

bb

/

BB

, ANGLE

bb

/

BB

1/3

1/12

0:16:57

1 ENG

D

5.1CH

OFF

1/1

NORM.

ABC

DVD

Options

Track Number

Time

Audio Channel

Sound

Function (Use v/V to select desired option)

Shows the current track number, total number of tracks

and PBC On mode, and skip to the desired track number.

Shows the elapsed playing time (Display only)

Shows the audio channel, and

changes the audio channel.

Shows the current sound mode, and

changes the setting.

Selection Method

b/B

,or

Numbers, OK

–

b/B

,or

AUDIO

b/B

1 /4

0:20:09

STER.

NORM.

VCD2.0

VCD1.1

English

18 Getting Star ted

Initial Settings

You can set your own Personal Preferences on the

DVD+VCR.

General Operation

1

Press SYSTEM MENU.

The setup menu appears.

22

Use

vv

/

VV

to select the desired option.

The screen will show the current setting for the select-

ed option, as well as alternate setting(s).

3

With the desired option selected, press

BB

, then

vv

/

VV

to select the desired control setting.

4

Press OK to confirm your selection.

Some options require additional steps.

5

Press SYSTEM MENU, RETURN, or PLAY (N)

to exit the setup menu.

Language

Disc Language

Select a language for the disc’s Menu, Audio, and Subtitle.

O

riginal : The original language set for the disc is selected.

Other : To select another language, use number buttons to enter

the corresponding 4-digit number according to the

language code list on page 37. If you enter the wrong

language code, press CLEAR.

Note

Disc Language selection may not work for some DVDs.

Menu Language

Select a language for the Setup menu. This is the menu you

see when you press SYSTEM MENU.

Picture

TV Aspect

4:3 Letterbox: Select when a standard 4:3 TV is connect-

ed. Displays playback images with masking bars above and

below the picture.

4:3 Panscan: Select when a standard 4:3 TV is connected.

Displays pictures cropped to fill your TV screen. Both sides

of the picture are cut off.

16:9 Wide: Select when a 16:9 wide TV is connected.

Progressive Scan

Progressive Scan Video provides the highest quality picture

with less flickering and increased image resolution. If you are

using the COMPONENT/PROGRESSIVE SCAN VIDEO

OUT jacks, but are connecting the DVD+VCR to a standard

(analog) television, set Progressive Scan to Off. If you are

using the Component Video jacks for connection to a TV or

monitor that is compatible with a progressive scan signal, set

Progressive Scan to On.

Caution

•Once the setting for progressive scan output is entered, a

confirmation message ‘Progressive Scan Mode’ appears on

screen. Use the 3/4 buttons to select “ON” and press

the SYSTEM MENU button. An image will be visible only

on a progressive scan compatible TV or monitor.

Note

If you set Progressive Scan to ON in error, you must

reset the DVD+VCR. Press STOP (x) and hold it for five

seconds before releasing it. The video output will be

restored to the standard setting, and a picture will once

again be visible on a conventional analog TV or monitor.

• Do not turn off the DVD+VCR while the "PROGRESSIVE

SCAN MODE" message is displayed on the TV screen.

DVD

DVD

DVD

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Original

German

English

Italian

Chinese

Polish

Portuguese

French

Spanish

Other — — — —

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Disc Audio

English

Spanish

French

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

4:3 Letterbox

4:3 Panscan

16:9 Wide

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Original

German

English

Italian

Chinese

Polish

Portuguese

French

Spanish

Other — — — —

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Off

On

English

Getting Star ted 19

Sound

Digital Audio Output

Each DVD disc has a variety of audio output options. Set the

DVD+VCR’s Digital Audio Output according to the type of

audio system you use.

DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if

you have connected the DVD+VCR’s DIGITAL AUDIO

OUT jack to a Dolby Digital decoder (or an amplifier or

other equipment with a Dolby Digital decoder).

Stream/PCM: Select Stream/PCM if you have

connected the DVD+VCR’s DIGITAL AUDIO OUT jack to

an amplifier or other equipment with a DTS decoder, Dolby

Digital decoder or MPEG decoder.

PCM: Select when connected to a 2 channel digital stereo

amplifier. The DVD+VCR outputs sounds in the PCM 2ch

format when you play a DVD video disc recorded with a

Dolby Digital, MPEG1, or MPEG2 recording system.

Sample Frequency

To change the Sample Frequency setting, first select the

desired Digital Audio Output as indicated as above.

If your receiver or amplifier is NOT capable of handling

96KHz signals, select 48KHz. With this selection the

DVD+VCR will automatically convert any 96KHz signals to

48KHz so your system can decode them.

If your receiver or amplifier is capable of handling 96KHz sig-

nals, select 96KHz. With this selection the unit will pass each

type of signal through without any further processing.

Others

The DRC, Vocal, PBC and Auto Play settings can be

changed.

" Use v/V to select the desired option and press OK. The

setting of the selected option is changed between On and

Off.

Dynamic Range Control (DRC)

With DVD digital audio technology, you can hear a pro-

gram’s soundtrack in the most accurate and realistic presen-

tation possible. However, you may wish to compress the

dynamic range of the audio output (the difference between

the loudest sounds and the quietest ones). Then, you may

listen to a movie at a lower volume without losing clarity of

sound. Set DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke DVD is

playing. The karaoke channels on the disc will mix into nor-

mal stereo sound.

PBC

Set Playback Control (PBC) to On or Off.

On: Video CDs with PBC are played with PBC active or in place.

Off: Video CDs with PBC are played the same way as Audio CDs.

Auto Play

You can set up the DVD Player so a DVD disc automatically

starts playing whenever the DVD is inserted.

If Auto Play mode is set to On, the DVD player will search a

title with the longest playback time and then play back the

title automatically.

On: Auto Play function is active.

Off: Auto Play function is turn off.

Note

The Auto Play function may not work for some DVDs.

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

DRC On

On

Off

Vocal

PBC

OffAuto Play

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

DOLBY

DIGITAL

/PCM

Stream/PCM

PCM

Sample Freq.

48 KHz

96KHz

English

20 Getting Star ted

Parental Control

Rating

Movies on DVDs may contain scenes not suitable for chil-

dren. Therefore, discs may contain Parental Control infor-

mation that applies to the complete disc or to certain scenes

on the disc. These scenes are rated from 1 to 8, where

some discs offer more suitable scenes for selection. Ratings

are country dependent. The Parental Control feature allows

you to prevent discs from being played by your children or

have certain discs played with alternative scenes.

11

Select Rating on the Setup menu using

vv

/

VV

buttons.

22

While Rating is selected, press

BB

.

33

When you have not setup a password yet.

Enter a 4-digit password using the numbered buttons to

create a personal 4-digit security password, then press

OK. Enter the 4-digit password again and press OK to

verify.

When you have already setup a password;

Enter a 4-digit password using the numerical buttons to

confirm the personal 4-digit security password, then

press OK.

If you make a mistake before pressing OK, press CLEAR and

enter 4-digit security password again.

44

Select a rating from 1 to 8 using

vv

/

VV

buttons.

One (1) has the least playback restrictions. Eight

(8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is not active.

The disc will play in full with all scenes offered.

Ratings 1 to 8: Some discs contain scenes not suitable for

children. If you set a rating for the DVD+VCR, all disc scenes

with the same rating or lower will be played. Higher rated

scenes will not be played unless an alternative scene is avail-

able on the disc. The alternative must have the same rating

or a lower one. If no suitable alternative is found, playback

will stop. You must enter the 4-digit password or change the

rating level in order to play the disc.

55

Press OK to confirm your rating selection, then

press SYSTEM MENU to exit the menu.

Country Code

Enter the code of a country whose standards were used to

rate the DVD video disc, referring to the list (See “Country

Code List”, page 38.).

11

Select the Country Code option using the v/V

buttons on the setup menu.

22

While Country Code is selected, press B.

33

Follow step 3 (see “Rating” section on left) or

use of password entry step.

44

Select the first character using the v/V buttons.

55

Press B to shift to second character and select

the second character using v/V buttons.

66

Press OK to confirm your Country Code selec-

tion, then press SYSTEM MENU to exit the

menu.

Note

Confirmation of the 4-digit password is necessary when the

password is changed (see “Changing the 4-digit password”

below).

Changing the 4-digit password

1 Follow Steps 1-2 as shown in Rating section (see left).

2 Enter the old password, then press OK.

3 Select Change using v/V buttons then press OK.

4 Enter the new 4-digit password, then press OK.

5 Enter exactly the same password a second time and verify

by pressing OK.

6 Press SYSTEM MENU to exit the menu.

If you forget your 4-digit password

If you forget your password, to clear the current password

follow the steps below.

1 Press SYSTEM MENU to display the setup menu.

2 Enter the 6-digit number 210499.

The existing 4-digit password is cleared.

3 Enter a new password as shown previously (in Rating sec-

tion).

DVD

DVD

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

Code Set

U S

5.1 Speaker Setup

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

Others

Disc Audio

8

7

6

5

4

3

2

1

Unlock

Change

English

Operation 21

Tape Operation

Normal Playback

Preparation:

"

Turn on the TV.

"

Tune the TV to the DVD+VCR output channel (CH 3 or 4) or

set the TV’s source selector to VIDEO (if using Video Inputs).

"

If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to correct

VIDEO mode.

"

Set the Output Source to VCR as shown in “Setting the Output

Source” on page 6.

11

Insert a prerecorded video cassette.

The indicator will light and the DVD+VCR will power-

up automatically.

" Make sure that the indicator in the display

window is not lit. If it is, press POWER once.

" If a tape without a safety tab is inserted, the unit will start

playback automatically.

22

Press PLAY ( N ) once.

PLAY appears on the TV screen .

" It is not necessary to select the tape speed for playback. It

will be automatically selected by the DVD+VCR.

" During playback, the TV/VCR selector switches to VCR

mode automatically.

33

Press STOP (

xx

) to stop playback.

STOP appears on the TV screen.

" If the tape reaches the end of its playback, the DVD+VCR

will automatically stop, rewind, eject the tape, and turn itself

off (Functions only with no disc in unit).

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to

remove snow or streaks.

The AUTO TRACKING function works in the following

cases:

" A tape is played back for the first time.

" Tape speed (SP, LP, SLP) changes.

" Streaks or snow appear because of scratches on the tape.

Manual Tracking

If noise appears on the screen during playback, press either

v/V on the remote control or CHANNEL (

VV//vv

) on the

front panel until the noise on the screen is reduced.

"

In case of vertical tremble, adjust these controls very carefully.

" Tracking is automatically reset to normal when the tape is ejected

or the power cord is unplugged for more than 3 seconds.

Special Effect Playbacks

Special effects playback

" Horizontal lines (noise bars) can appear on-screen with some VCR

playback adjustments This is normal.

" The audio is automatically muted during special effect modes.

(Example: there is no sound during search).

" During high-speed picture search modes, a short time is needed to

stabilize tape speed (when re-entering the PLAY mode). Slight inter-

ference may be seen during this period.

Search

This function lets you visually search for a desired tape sec-

tion in either direction (forward or reverse).

1 Press . or > during playback.

The DVD+VCR will start SEARCH mode.

" If the DVD+VCR is left in the SEARCH mode for more than 3

minutes, the DVD+VCR will automatically enter the PLAY

mode. This is done to protect the tape and video heads.

2 To return to playback, press PLAY ( N ).

Still Picture and Frame-by-Frame Playback

1 Press PAUSE/STEP (X) during playback.

Still picture appears on the TV screen.

" If a still picture vibrates vertically, stabilize it by pressing

v/V on the remote control.

" If the DVD+VCR is left in the STILL mode for more than 5

minutes, the DVD+VCR will automatically enter the STOP

mode.

2

Press PAUSE/STEP (X) repeatedly to advance the

video picture one frame at a time while viewing a still pic-

ture.

3 To return to playback, press PLAY ( N ).

Slow Motion

1 During the still mode, press >.

The tape will playback 1/19 times slower than normal

speed.

" During slow playback, use v/V on the Remote Control to

adjust any noise bands.

" If slow motion mode continues for more than 3 minutes, the

DVD+VCR will automatically change to playback mode.

2 To return to playback, press PLAY ( N ).

English

22 Operation

Normal Recording

Preparation:

"

Turn on the power for both the DVD+VCR and TV.

"

Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set

the TV’s source selector to VIDEO (if using Video Inputs).

"

If a direct VIDEO/AUDIO connection is made between the

DVD+VCR and the TV, set the TV’s source selector to correct

VIDEO mode.

11

Insert a video cassette with the safety tab intact.

22

Select the desired channel by using

vv

/

VV

.

"

If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the LINE1 or

LINE2 by pressing INPUT.

33

Set the desired recording speed (SP or SLP) by

pressing SPEED.

"

This DVD+VCR is not designed to record in LP mode.

44

Set the MTS mode as desired (See page 15, 25).

55

Press REC/ITR (

zz

) once.

Recording will start. (The REC indicator will light in the

display window.)

"

REC indicator appears only when the Output Source is set

to VCR.

"

If a cassette with no safety tab is loaded, the cassette will be

ejected automatically.

66

Press STOP (

xx

) to stop recording.

If the tape reaches the end of its playback, the DVD+VCR will

automatically stop, rewind, eject, and turn itself off (Functions

only with no disc in unit).

To pause the recording

1 Press PAUSE/STEP (X) to pause the tape during

recording.

The REC indicator will flash in the display window.

2 When you want to continue recording, press

PAUSE/STEP (X) or press REC/ITR (

zz

).

"

After 5 minutes in pause mode, the unit will stop automatically

to protect the tape and the video heads.

To record one TV program while watching another

1 Press TV/VCR to select the TV mode during recording.

The TV indicator appears.

2 Using the TV, select the desired channel to be viewed.

Tips

Always use PAUSE/STEP (X) for the best results when making

changes during recording.

For example: To change channels during recording, first press

PAUSE/STEP (

X) to put the unit in pause mode. Then select the

desired channel on the DVD+VCR, and press PAUSE/STEP (

X)

again to resume recording.

Timer Recording

This DVD+VCR can be programmed to record up to 8 pro-

grams within a period of 1 year. For unattended recording,

the timer needs to know the channels to be recorded and the

program start and end times.

Preparation:

"

Turn on the power of both the DVD+VCR and the TV.

"

Be sure the TV is set to the DVD+VCR output channel (3 or 4).

"

Make sure the TUNING BAND in the TUNING menu is set cor-

rectly (TV or CATV).

11

Press SYSTEM MENU and the MAIN menu will

appear.

22

Use

vv

/

VV

to choose the PROGRAM menu.

33

Press OK to go to the PROGRAM menu.

The PROGRAM menu will appear.

"

If all programs had been entered, ‘FULLY PROGRAMMED’

message would appear, and then PROGRAM 1 would show

on the TV screen.

44

Use

bb

/

BB

to choose the PROGRAM No. (1-8).

55

Use

VV

to choose the MONTH option.

Use

bb

/

BB

to choose the desired month.

66

Use

VV

to choose the DAY option.

Use

bb

/

BB

to choose the desired day.

77

Use

VV

to choose the START option.

Use

bb

/

BB

to choose the desired start time.

88

Use

VV

to choose the STOP option.

Use

bb

/

BB

to choose the desired stop time.

99

Use

VV

to choose the CHANNEL option.

Use

bb

/

BB

to choose the desired channel (Channel,

LINE1 or LINE2).

Cable Users: If you have CABLE TV and used a Cable Box in

Connecting to the DVD+VCR, you must set the channel to

match the cable box output channel (usually CH 3 or 4). Select

or change channels on the cable box instead of on the

DVD+VCR.

"

If you try to set the program timer before setting the clock,

PLEASE SET THE CLOCK appears for a moment and then

CLOCK menu appears on the TV screen. Set the time and date

to continue.

"

Make sure a tape is in the DVD+VCR and the safety tab is in

place or the tape will be automatically ejected.

Things to know before starting

English

1100

Use

VV

to choose the SPEED option.

Use

bb

/

BB

to choose between AUTO, SP or

SLP.

"

AUTO mode determines how much tape is left and

switches speed from SP to SLP, if necessary, to complete

recording the program. There will be some picture and

sound distortion at the point of the speed change.

1111

Use

VV

to choose the REPEAT option.

Use

bb

/

BB

to choose between ONCE, WEEKLY

or DAILY events.

ONCE ....for recording up to 8 programs on a single day

or other days up to 1 year.

WEEKLY ....for recording up to 8 programs on a certain

day of every week.

DAILY ....for recording up to 8 programs at the same

time(s) from Monday through Friday.

Tip

If the input data is wrong, use

vv

to select the data

and correct it using

bb

/

BB

.

1122

Press MENU, the program will be memorized

at the DVD+VCR.

"

indicator lights in the display window.

"

If the program preset time is past, a ‘PAST TIME PRO-

GRAMMED’ message will appear on the TV screen.

Return to the incorrect program and update it with the

correct time.

"

If you had entered a past date, the timer recording will

be performed on that date for the next year.

"

Additional programs may be entered by repeating steps

1-12.

Cable Users: If your cable hookup is via a TV converter

box, you can program multiple recordings only on the con-

verter box output channel. This is because the converter

must be kept on the channel you view through your

DVD+VCR.

Tip

When finished programming and you want to set the DVD+VCR to

record the programs you have entered.

MAKE SURE YOU HAVE INSERTED A TAPE INTO THE

DVD+VCR. The DVD+VCR is now set to record the preset pro-

grams.

Note

If the power fails or the DVD+VCR is unplugged from the AC

outlet, the correct clock time and timer settings are kept in memory

for about 3 seconds. After 3 seconds, the clock and program timer

will be reset when power is restored. Reset the clock according to

instructions.

After setting up a timer recording, recording will start if no other

timer recordings are scheduled to occur at the same time (see

“Program Priority” in next section).

Checking (Erasing) the Timer Program

Programming can be checked whenever the DVD+VCR is

turned on.

1 Press SYSTEM MENU and the MAIN menu will appear.

2 Use v/V to choose the PROGRAM menu.

Press ENTER and the PROGRAM menu will appear.

3 Use b/B to select a program you want to check or

erase. If you want to erase the program, press CLEAR.

4 Press MENU to return to the TV screen.

Program Priority

If the starting and ending times of two or more timer

recordings overlap on the same

day, priority is given to the earli-

est recording. For example, in

the diagram at left Program num-

ber 2 will not be recorded until

Program number 1 is finished.

The first part of Program number

2 will not be recorded. Likewise,

Program number 3 will not be recorded until Program num-

ber 2 is finished, and so on.

Operation 23

English

24 Operation

Instant Timer Recording

Instant Timer Recording allows you to easily make a preset

recording without using the program timer.

Preparation:

" Turn on the power of both the DVD+VCR and the TV.

" Be sure the TV is tuned to the DVD+VCR output channel (3 or 4).

" If a direct VIDEO/AUDIO connection is made between the DVD+VCR

and the TV, set the TV’s source selector to correct VIDEO Input

mode.

11

Insert a video cassette with the safety tab intact.

22

Select the desired channel by using

vv

/

VV

or num-

ber (0-9).

The channel number appears on the TV screen.

" If you are recording from another source via audio/video

input jacks (at the Rear or Front panel), select the LINE1 or

LINE2.

33

Set the desired recording speed (SP or SLP) by

pressing SPEED.

The tape speed will appear on the TV screen.

44

Press REC/ITR (

zz

) twice.

The menu as shows, will appear on the TV screen.

" Recording will start. (The indicator will light)

55

Press REC/ITR (

zz

) repeatedly to select the

recording time length.

At the end of the recording, the DVD+VCR will stop

recording and shut off.

" During Instant Timer Recording, changing the channel on the

DVD+VCR will not be possible.

" You can stop the recording by pressing STOP (x).

INSTANT TIMER RECORD MENU

Checking the Recording Time

Press REC/ITR (z) once to check the recording time. The

recalled setting will automatically return to the TV screen

after 6 seconds.

To extend the Recording Time

The recording time can be extended anytime by pressing

REC/ITR (z).

Each press results in advancing the recording time by 30-

minutes.

Notes

" If you press PAUSE/STEP (X) during instant timer recording, the

DVD+VCR will enter the recording pause mode. Instant timer

recording is cancelled.

" If the DVD+VCR is set to “0H00M”, the DVD+VCR goes to nor-

mal recording mode.

Dubbing and Editing

If you wish to edit or dub your camcorder (or VCR)

recordings to this DVD+VCR, the rear (or Front) panel

mounted Audio and Video (A/V) input jacks make connec-

tions quick and easy. These direct A/V jacks will also pro-

vide better picture results than using the RF jack on the

rear panel.

11

Connect the camcorder’s (or VCR’s) A/V

outputs to your DVD+VCR as illustrated on page

13.

22

Set the DVD+VCR input channel to “LINE2”.

(Press INPUT to select LINE2.)

"

If you have connected your DVD+VCR to the A/V input

jacks on the rear of DVD+VCR, you should select the

input channel LINE1 by pressing INPUT twice.

33

Play the tape in the camcorder (or VCR). If you

have a TV connected to your DVD+VCR, you

can see the video playing.

44

When you want recording to begin, press

DVD+VCR’s REC/ITR (

zz

) once to start.

" You can stop the recording by pressing STOP (x).

Note

Before recording, please confirm the recording start position.

Copying from DVD to VCR

This unit allows you to copy the contents of a DVD to a

VHS tape.

Note

If the DVD you are attempting to copy is copy protected,

you will not be able to copy the disc. It is not permitted to

copy Macrovision encoded DVDs. “Lock” is displayed in the

display window.

11

Insert Disc

Insert the disc you wish to copy in the DVD deck and

close the disc tray.

22

Insert VHS Tape

Insert a blank VHS video tape into the VCR deck.

33

Press PLAY ( N ) on the DVD deck.

The DVD will go into play mode

" If the DVD disc menu appears, you may need to press the

PLAY (

NN

) manually to begin copying.

44

Press REC/ITR (

zz

) on the VCR deck or on the

remote control.

" The DVD+VCR will go into Record mode.

55

Stop the Copy Process

When the DVD is finished playing, press STOP (x) to end the

copy.

You must stop the Copy process manually when the DVD

movie ends, otherwise the unit may record over again.

Note

When you stop the DVD playback during copying, the recording on

VCR is stopped automatically.

INSTANT TIMER RECORD

CHANNEL 2

SPEED SP

START NOW

LENGTH 0H30M

0H30M ..... 9H00M

→

0H00M

Length Display

(each additional press of

REC/ITR (

zz

) increases recording

time 30 minutes)