Magic Chef MCWC30MCG, MCWC16MCG User Manual

5 (1)
Magic Chef MCWC30MCG, MCWC16MCG User Manual

Wine Cooler

Model No. MCWC16MCG MCWC30MCG

Wine Cooler

. Before Putting Into Use . . . . . . . . . . . . . . . . .

2

. Important . . . . . . . . . . . . . . . . . . . . . . . .

3

. Placing and Installation . . . . . . . . . . . . . . . . .

4

. Description of the Appliance . . . . . . . . . . . . . . .

5

. Temperature Control . . . . . . . . . . . . . . . . . . .

5

. Maintenance and Cleaning . . . . . . . . . . . . . . . .

7

. Trouble Shooting Guide . . . . . . . . . . . . . . . . .

8

. Limited Warranty . . . . . . . . . . . . . . . . . .

10

CAUTION:

Read and follow all safety rules and operating instructions before first use of this product.

o F to 66.2

Wine Cooler

Thank you for buying this appliance.

We hope it will successfully serve your requirements for many years.

This appliance is intended for storing bottled wine in the temperature range of 5.5 to 19.0 / 41.9 o F.

SAVE THESE INSTRUCTIONS

Before Putting Into Use . . . . . . . . . . . . .

2

To Assemble Door Handle

 

Instructions for Use

 

Tips for Energy Savings

 

Important . . . . . . . . . . . . . . . . . . . . .

3

Disposing of Worn Out Appliances

 

Placing and Installation . . . . . . . . . . . . .

4

Choosing the Right Place

 

Placing the Self-standing Appliance

 

Connection to Power Supply

 

Description of the Appliance . . . . . . . . . . . . 5

Temperature Control . . . . . . . . . . . . . .

5

Temperature Selection

 

Illustration of the Appliance

 

Maintenance and Cleaning . . . . . . . . . . . . . 7

Automatic Defrosting of the appliance

 

Cleaning of the Appliance

 

Switch Off the Appliance When Not In Use

 

Trouble-Shooting Guide . . . . . . . . . . . . . . . 8

Limited Warranty . . . . . . . . . . . . . . . .

10

1

Before Putting Into Use

To Assemble Door Handle

(Door handle assembling

for MCWC16MCG & MCWC30MCG )

To save shipping space and avoid damage of the unit during transportation, the door handle of this unit is shipped unassembled. Before putting the unit into use you are kindly asked to assemble the door handle as follows:

. Locate the door handle and 2 screws attached inside the cabinet, and prepare an appropriate screwdriver.

. With the 2 screws attached, fasten the door handle onto the frame of the door panel as illustrated. Be sure that the screws must point to the holes on the frame of the door panel when doing so.

·Before connecting the appliance to electrical power supply, leave it to stand for about 2 hours, which will reduce the possibility of malfunctions in the cooling system due to transport handling.

·Clean the appliance thoroughly, especially in the interior (See Cleaning and Maintenance).

·In case the interior accessories are not correctly placed, rearrange them as described in chapter "Description of the Appliance".

Instructions for Use

These instructions for use are intended for the user. They describe the appliance and correct operating procedures for safe use .

SAVE THESE INSTRUCTIONS:

Tips for Energy Saving

·Try not to open the door too often, especially when the weather is hot and humid. Once you open the door , close it as soon as possible. This is especially important if you have an upright model .

·Every now and then check if the appliance is sufficiently ventilated ( adequate air circulation behind the appliance ).

·Set the thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is, ambient temperatures etc.).

·If the gasket is damaged or the door seal is poor, energy consumption is substantially higher. To restore efficiency, replace the gasket.

·Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.

2

Important

·If you have bought this appliance to replace an old one equipped with a door lock that cannot be opened from the inside (lock, bolt), make sure that the lock is removed, disabled or destroyed before discarding. This will make it impossible for children to accidentally lock themselves inside the appliance and suffocate.

·To avoid risk of child entrapment, leave the shelves in place so children can not easily climb inside even when the appliance is in routine use or not in use at home.

·The appliance must be properly connected to an electrical power supply. (See: Connection to Power Supply) .

·Do not use an extension cord.

·Always disconnect the appliance from the power supply before cleaning the appliance, or attempting repairs.

WARNING:

. Repairs should be performed by qualified service personnel only.

·Do not defrost the appliance with other electric appliances (for example a hair dryer) and never attempt to scrape/remove ice/frost with sharp objects.

·The cooling system of the appliance is filled with refrigerant and oil ,so when the appliance is damaged, handle it with care and dispose of it in compliance with environmental protection safeguards.

·The rating plate containing Model No and other technical data specific to this unit, is located either inside the appliance or outside on the rear wall.

Disposing of Worn Out

Appliances

·DANGER OR WARNING: Risk of child entrapment. Before you throw away your old refrigerator or freezer:

-Take off the doors

-Leave the shelves in place so children may not easily climb inside.

·The cooling system of the appliance is filled with refrigerant and insulating substances which should be separately treated and processed. Call your

nearest authorised service agent. If you are unable to locate one, contact your local authorities or your distributor. Be careful not to damage the tubes on

the rear wall of the appliance (danger of pollution).

3

Loading...
+ 8 hidden pages