LST WMSTR-WR-P02, WMSTR-WR-P01 User Manual

Size:
180.61 Kb
Download

Strobe

WMSTR-WR-P01,WMSTR-WR-P02

ADM loop technology with System Sensor/200 protocol

Long lifetime of strobe due to the use of LEDs

Low power consumption

Versions with or without integrated dual-isolatoravailable

Various base types available – IP24, IP44, IP65

Description

The loop powered strobe is fitted into a round, red plastic case. It is powered and actuated as a module via the ADM loop with System Sensor/200 protocol.

The address of the strobe is selected with two decadic rotary switches located at the bottom of the device.

The strobe is designed for indoor or outdoor wall moun-

ting. For this purpose a special base is needed. Various base types for protection classes IP24, IP44 or IP65 are available, depending on the application. An optional mounting plate can be supplied for surface mounted cabling.

The strobe is available in two different versions: With or without integrated dual-isolatormodule.

Specifi cations

Operating voltage

Supply through loop voltage

Flash frequency

1Hz

Ambient temperature

-25°Cto +70°C

Dimensions ø × H

112 × 37 (mm) (incl. base LPBW)

Weight

80g

Colour

red

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

WMSTR-WR-P0x_DBL_LST_EN_0804.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

 

Loop strobe without isolator

 

Current consumption from loop

max. 450µA (strobe off)

 

max. 3.8mA (strobe active)

Order number

356140

Order name

Strobe/WM/200/Red WMSTR-WR-P01

Loop strobe with isolator

 

Current consumption from loop

max. 450µA (strobe off)

 

max. 4.0mA (strobe active)

Order number

356141

Order name

Strobe/WM/200ISM/Red WMSTR-WR-P02

Base and accessories

For wall mounting of the strobe, various base types with protection classes IP24, IP44 or IP65 are available.

For surface mounted cabling with base LPBW, an optional mounting plate can be supplied.

Specifi cations

Base IP24

 

Order number

359040

Order name

Base Sounder & Strobe/IP24/White LPBW

Base IP44

 

Order number

359041

Order name

Base Sounder & Strobe/IP44/Red SDBR

Base IP65 (not illustrated)

 

Order number

359042

Order name

Base Sounder & Strobe/IP65/Red WDBR

Mounting plate for surface mounted cabling with base LPBW, 5 Pieces

Order number

359049

Order name

Mounting Plate for Sounder/200/5 pcs. DBSPD/5

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

WMSTR-WR-P0x_DBL_LST_EN_0804.PDF• PAGE 2

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED