LST SG70-1 User Manual

Size:
171.83 Kb
Download

Remote Tableau

SG70-1

Intelligent remote tableau for Fire Detection Control Panels Series BC216 and Series BC016

Indication of the events and operating conditions of a fi re detection system

Remote operation of important system functions

Optional key switch for authorization

Connection to the INFO bus

Description

The Remote Tableau SG70-1is designed for the indication of the events and operating conditions of Fire Detection Control Panels Series BC216 and BC016 at a remote site. Furthermore, important operations of the fire detection system can be carried out on the remote tableau.

On the integrated 4-lineLC display, the events of the fire detectionsystemareindicatedascleartextsandtheycan be displayed one after the other by means of the scroll buttons.Importantoperatingconditionsofthefiredetection system are indicated by LED displays. In addition, alarms and faults are signalled by the integrated buzzer.

By parameterising the appropriate filters and combinations in the PC software PARSOFT, all events or only selected events of the system can be indicated and thus be adapted to the requirements of the user. For example, filters can be set in such a way that one remote tableau only indicates alarms and technical messages, while faults are indicated on a further remote tableau. In the same way, an area tableau for one floor or for one building can be implemented by parameterising combinations in order to restrict the indication of events to certain zones or actuations.

The fields „TRANSMITTING DEVICE“ and „ALARMING DEVICE“ offer the same function as the fields of the Fire Detection Control Panel Series BC216 or BC016 to which the remote tableau is connected. They serve for the remote indication and operation of the primary transmitting device and of the alarming device that is parameterised on the control panel.

The button in the „TRANSMITTING DEVICE“ field is used for toggling between day and night operation of the transmitting device and for starting the alarm delay. By means of the button in the „ALARMING DEVICE“ field, the activated alarming device can be silenced or reactivated.

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

SG70-1_DBL_LST_EN_0913.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

 

The remote tableau is equipped with a USB interface through which the system-specificparameterisation and current firmware versions are loaded by means of the Parameter Setup Software PARSOFT. Varioususer-spe-cific parameters – such as the menu language or the LCD contrast – can be set directly through the menu on the remote tableau.

The LED indicators are lettered by means of labelling strips and are thus easily adapted to the respective language and application.

Furthermore, the remote tableau is equipped with 2 auxiliary inputs and an additional button with parameterisable function. With that, special operations of the fire detection system can be carried out – such as „Silence buzzer“ or „Panel reset“.

The Remote Tableau SG70-1is connected with the Fire Detection Control Panel Series BC216 or Series BC016 via the INFO bus. All in all, up to 6 INFO bus devices can be connected to a control panel.

In applications which require a higher degree of protection against unauthorized access, the authorization can be switched by means of the optional Key Switch SCH70-1.The authorization key switch can also be installed into the housing of the remote tableau at a later stage.

Specifi cations

Remote Tableau SG70-1

 

Operating voltage

15 – 31VDC

Current consumption at 24V

 

without display illumination

typ. 20mA

during display test

max. 90mA

Baud rate INFO bus

600, 1200, 2400, 4800 baud

Serial interface connection

USB socket type B

Ambient temperature

-20°Cto +60°C

Relative humidity

max. 95% (no condensation)

Protection class

IP30

Colour housing

grey white, RAL 9002

Colour front foil

light grey, RAL 7035

Dimensions W × H × D

174 × 250 × 28.5 (mm)

Weight

1.2kg

Order number

250020

Order name

Remote Tableau SG70-1

Key Switch SCH70-1

 

Order number

250021

Order name

Key Switch Set Complete SCH70-1

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

SG70-1_DBL_LST_EN_0913.PDF• PAGE 2

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED