LST Series 200 User Manual

Size:
114.7 Kb
Download

Detector Base Accessories

Series 200/300

Wet base shroud

Surface mounting kit

Detector base adapter

Recessed mounting kit for fl ush mounting in false ceilings

Detector mounting bracket

fig. D

fig. A fig. B

fig. C fig. E

Wet base shroud

The wet base shroud (fig. A) is used for moist room B524HTR and B524RTE. It is prepared for PG screw mounting and accommodates the Detector Bases connections.

B501, B501DG, B401RM, B524IEFT-1,B524FTXE,

Specifi cations

Dimensions ø × H

105 × 70 (mm)

Colour

cream

Weight

100g

Order number

249012

Order name

Wet Base Shroud/SS WB1

Surface mounting kit

The surface mounting kit (fig. B) is used for surface

B524RTE. It allows to easily insert cable conduits or

mounting of the Detector Bases B501, B501DG,

thick cables and it is prepared for PG screw connec-

B401RM, B524IEFT-1,B524FTXE, B524HTR and

tions.

Specifi cations

Dimensions ø × H

103 × 34 (mm)

Colour

cream

Weight

90g

Order number

246009

Order name

Surface Mounting Kit/SS SMK400

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

MS-ZBH-Sys_DBL_LST_EN_0804.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED

 

Detector base adapter

The base adapter (fig. C) is a supplement to the De-

B524HTR and B524RTE and allows to safely cover the

tector Bases B501, B501DG, B401RM, B524IEFT-1,

mounting area and to compensate an uneven surface.

Specifi cations

Dimensions ø × H

103 × 5 (mm)

Colour

cream

Weight

50g

Order number

246006

Order name

Base Adapter/SS MZP500-1

Recessed mounting kit for fl ush mounting

Therecessedmountingkit(fig.D)isusedforflushmoun-

B524IEFT-1,B524HTR and B524RTE in false ceilings.

ting of the Detector Bases B501, B501DG, B401RM,

 

Specifi cations

Dimensions ø × H

144 × 40 (mm)

Colour

cream

Weight

90g

Order number

246010

Order name

Recessed Mounting Kit/SS RMK400

Detector mounting bracket

The detector mounting bracket (fig. E) is made of galva-

shafts or shelves. The bracket provides all threaded ho-

nised steel sheet and serves for the lateral mounting of

les needed for easy mounting of a detector base.

an automatic fire detector, e.g., in false floors, elevator

 

Specifi cations

Dimensions L × W × H

130 × 120 × 40 (mm)

Weight

225g

Order number

249044

Order name

Detector Mounting Bracket MMW1-1

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

MS-ZBH-Sys_DBL_LST_EN_0804.PDF• PAGE 2

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED