LST M201E-240 User Manual

Size:
91.69 Kb
Download

Control Module

M201E-240

ADM loop technology with System Sensor/200 protocol

One output with dry relay contacts 230VAC

Status LED

Setting of module address via decadic rotary switches

Supplied with module box (wall-mountcase)

Description

The Control Module M201E-240serves to actuate external devices by means of one normally open and a separate normally closed relay contact, suitable for switching 230VAC. Communication to the fire detection control panel is established via the ADM loop using System Sensor/200 protocol.

A status LED indicates the condition of the module. The addressable control module is supplied in a module box for easy wall mounting. Separate terminals enable the operation of the module with or without the integrated dual-isolator.

Specifi cations

Operating voltage

Supply through loop voltage

Current consumption

approx. 510µA (quiescent)

Contacts

1 × NO, 1 × NC

Contact rating

5A/30VDC or 5A/230VAC

Ambient temperature

-20°Cto +60°C

Dimensions L × W × H

132 × 137 × 40 (mm)

Colour

cream/transparent smoke-coloured

Weight

195g

Approval

VdS G202141

Order number

249105

Order name

Control Module 1xRel.Out/Anal./200/SS M201E-240

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

M201E-240_DBL_LST_EN_0804.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED