LST IM-10 User Manual

Size:
92.72 Kb
Download

Monitor Module

IM-10

ADM loop technology with System Sensor/200 protocol

10 independent inputs with monitoring for wire breakage and short circuit

Status LED for each input

Setting of module address via decadic rotary switches

Mounting in surface mounting box

Description

The addressable Monitor Module IM-10provides 10 independent inputs and serves for theline-monitoredintegration of contact detectors, such as manual call points, sprinkler system contacts or supervising contacts, into the bidirectional communication on the ADM loop with System Sensor/200 protocol.

The Monitor Module IM-10occupies 10 consecutive

addresses on the ADM loop. During commissioning, the base address, i.e., the lowest one of the 10 addresses, is set by means of decadic rotary switches.

The optional steel sheet Surface Mounting Box M200SMB-MMaccommodates one Monitor ModuleIM-10or Control ModuleCR-6.

Specifi cations

Operating voltage

Supply through loop voltage

Current consumption

approx. 3.5mA (quiescent)

Ambient temperature

0°C to +50°C

Dimensions L × W × H

172 × 147 × 25 (mm)

Weight

500g

Order number

249115

Order name

Monitor Module 10xSurv.In/Anal./200/SS IM-10

Surface Mounting Box

 

Ambient temperature

0°C to +50°C

Dimensions L × W × H

285 × 225 × 62 (mm)

Colour

cream

Weight

2kg

Order number

249117

Order name

Surface Mounting Box for Multimodule/SS M200SMB-MM

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

IM-10_DBL_LST_EN_0804.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED