LST HT-11001 User Manual

Size:
116.01 Kb
Download

Thermal ROR Detector

HT-11001

Addressable conventional technology

Maximum temperature 57°C

Individual detector addressing by means of optional address module

Optional connection of remote indicator

Extremely fl at design

Sealed electronics

Description

The Thermal ROR Detector HT-11001reacts to temperature changes within defined periods of time, up to a maximum temperature of 57°C. The intelligent evaluation of these data allows the early detection of spreading fires. The detector complies with Class A1R and can be used up to a room height of 7.5m.

Addressable conventional technology is used for alarm transmission to the fire detection control panel. By

means of the optional Address Module NG60-1,each detector can be addressed individually, thus allowing to display the detector address, as well as an assigned element text, on a suitable fire detection control panel.

A detector fault is indicated by a yellow flashing of the multicoloured status LED.

The detector can be attached to various bases and it can be protected against theft.

Specifi cations

Operating voltage

Supply through the detector line voltage

Current consumption

typ. 65µA (quiescent)

Alarm temperature

57°C (maximum-heatcomponent)

Operating temperature

max. +50°C

Ambient temperature

-40°Cto +70°C (no condensation or icing)

Relative humidity

0 – 98% (no condensation)

Dimensions ø × H

100 × 36 (mm)

Colour

white

Weight

70g

Approval

VdS G204033

Order number

242030

Order name

Thermal ROR Detector/Conv./ORBIS/Apo HT-11001

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

HT-11001_DBL_LST_EN_0804.PDF• PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED