LST ECO1000BREL24L User Manual

Size:
88.06 Kb
Download

DetectorRelayBase

ECO1000BREL24L

Suitable for automatic detectors in conventional technology

Relay output with dry change-overcontact

Screw terminals for secure connection of multiple wires

Test contact for examining the detector line without detectors

Mechanical theft protection can be activated

Description

The Detector Relay Base ECO1000BREL24L with integrated relay output is designed for the easy connection of automatic detectors Series ECO1000. Due to its robust multi-wirescrew terminals, the detectors can be wired with ease, thus achieving a secure and durable connection.

The relay output is activated through the alarm activation of the inserted detector and remains active until the alarm is reset on the fire detection control panel. The application has to comply with the guidelines in the LST Connection of Detectors.

During construction work (or when the detector has been removed) the detector line can be connected through via an auxiliary contact, which is integrated into the base. With that, the whole wiring of the detector line can be examined without risking contamination of the detectors. The contact is automatically opened by installing the detector.

The base is designed for surface mounting in dry rooms. A mechanical theft protection of the detector can optionally be activated at the detector base.

Specifi cations

Operating voltage

Supply through the detector line voltage

Current consumption

1µA (quiescent), 30mA (active)

Contact rating

1A at 30VDC

Ambient temperature

-30°Cto +70°C

Relative humidity

5 – 93% (no condensation)

Dimensions ø × H

102.5 × 33 (mm)

Colour

white

Weight

70g

Order number

246141

Order name

Detector Relay Base/Conv./1000/SS ECO1000BREL24L

Building Safety. Building Security.

A

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231WIEN • WIEGELESTRASSE 36 • TEL +43 152114-0• FAX +43 152114-27

ECO1000BREL24L_DBL_LST_EN_0804.PDF • PAGE 1

OFFICE@LST.AT • WWW.LST.AT • ALL RIGHTS RESERVED