Loewe L 37, L 42, A 42, L 32 User Manual

5 (1)

Operating Instructions

TV

Xelos A 42

Xelos A 37

Xelos A 32

Xelos A 26

Modus L 42

Modus L 37

Modus L 32

233–32789.021

Neu für 5. Auflage:

Seite 3: Abbildung geändert

Seite 39: Abbildungen geändert

Seite 42: Kontrastverhältnis 1200:1 bei 37“

1 -

Contents

Remote control - TV functions

Control unit

Connections to rear panel

Welcome

Integrated features

Scope of delivery

Transporting

Installation options

Notes on the screen

Cleaning

Disposal

For your safety

First installation

Remote control Connection

Use of the binders for Xelos A 42 and Modus L 42 Using the conditional access module

Switching on Automatic programming

Directing DVB-T antenna

Daily operation

Switching on/off

Changing stations

Basics about the menu operation

For the info system...

For the index...

Setting the sound

Picture settings

Direct control on TV set

Operating modes

TV

How the coloured keys work for the TV mode Show status display

Calling the index

Calling additional functions Calling timer overview Selecting picture format Moving picture up/down TV menu

DVB subtitles CA module

Installing new DVB software Image+

- 2

3

Picture in picture (PIP)

25 – 26

4

 

PIP picture as freeze picture

25

 

Selecting the station of the PIP picture

25

5 – 7

 

 

Selecting the station of the TV picture

25

 

 

8 – 9

 

PIP scan in the PIP picture

25

8

 

Interchanging PIP picture/TV picture

25

8

 

 

Functions in the PIP menu

26

8

 

 

Switch to small PIP

26

8

 

EPG – Programme guide

27 – 28

8 – 9

 

Using the EPG

27

9

 

 

EPG menu

28

9

 

 

Provider/programme selection

28

 

 

10

 

Data capture

28

11 – 14

Teletext

29 – 30

 

Page selection

29

11

 

 

Displaying teletext pages

29

11 – 12

 

 

Programme timer recordings

30

12

 

 

Teletext menu

30

12

 

 

Digital teletext (only UK)

30

12

 

Radio

31

13

 

 

 

14

Operating additional equipment

32 – 39

14 – 19

Login and connect equipment

32

Video playback

33

14

Timer recording with video or DVD recorder

33

15

Assignment of digital audio inputs and outputs

34

16

Connecting Loewe DVD Preceiver Auro 2216 PS

 

17

 

and Individual Sound loudspeaker system

35

18

Connecting other audio amplifiers or active speakers

36

19

HDMI (DVI) connection

37

19

VGA/XGA connection

37

19

Component video connection

38

20 – 31

Operate Loewe DVD player and recorder with the remote control

39

20 – 24

What to do, if ...

40 – 41

20

 

 

 

20

Technical data

42 – 43

20

Accessories

44 – 45

21

Service addresses

46

21

 

 

 

21

 

 

 

21

 

 

 

21 – 22

 

 

 

22

 

 

 

23

 

Dolby and the double ´D´ symbol are

 

 

 

 

 

23

 

 

24

 

trademarks of Dolby Laboratories

 

Remote control – TV functions

Sound off/on

Switch on/off - on stand by

LED indicator for current operating mode

Switch over to the TV mode

Switch over to the RADIO mode (2

 

Switch over to operate Recorder

Switch over to operate DVD-Player

Call timer list

Sound menu on/off

Set picture format

Select station directly;

 

 

MENU: enter numbers or letters

 

Call AV selection

Menu “Other functions“ on/off

 

Electronic Programme Guide (EPG) on/off

PIP on/off (picture in picture)

 

 

Open index;

Teletext on/off (3

MENU: info texts on/off

Show/hide menu

Status display on/off (3;

V–/V+

MENU: hide menu

P+/P–

Volume down/up

 

Select station up/down

PIP: Position of the PIP picture;

 

MENU: select/set

Station list on;

 

 

MENU: confirm/call

Green button: (3

 

Standard settings for picture/sound

Yellow button: (3 previous station

Red button: (3

Blue button: (3 programme info on/off

Freeze picture on/off

 

Select station down (1

Select station up (1

Freeze picture off (1

/in the Wizard: back

 

Direct recording (1

Freeze picture on (1

Freeze picture on/off (1

 

(1 when equipped with

 

Digital Recorder +, these

(3 with DVB-T stations in GB

buttons have different functions,

different function. The coloured

see operating instructions

keys do not work as described

of the Digital Recorder

with DVB-T stations in GB,

(2 Radio only for DVB reception

but they operate as described

if broadcast by the station

on page 30 (Digital Teletext).

 

- 3

3 -

Loewe L 37, L 42, A 42, L 32 User Manual

Control unit

 

 

Display:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Call the menu,

 

 

 

 

red = standby

 

 

 

in the menu: up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

green = operation

 

 

 

 

 

 

 

 

 

 

 

 

orange = operation without screen display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(radio mode, EPG data capture

 

 

 

 

 

 

 

 

 

 

 

 

 

or timer recording)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Station down,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

in the menu: left

 

 

 

 

 

DR+

 

 

 

 

 

 

 

 

 

 

Switch TV set on/off

 

 

 

 

 

 

 

 

 

 

 

 

 

to standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Radio on/off (1 (back to TV mode),

(1

Radio only for DVB reception, provided the station broadcasts

switching on the radio

 

this. Otherwise, switch over to an audio input.

 

 

 

from standby,

(2

Only for sets with Digital Recorder+

 

in the menu: down

Station up,

in the menu: right

Display DR+ : (2

white = Digital Recorder integrated, but not active

(no recording, no play)

green = Digital Recorder active (timeshift or archive playback) red = Digital Recorder active (archive recording)

- 4

Connections to rear panel – Xelos A 26

Common interface (CI-Slot)

Headphone connection

S-VHS connection (AVS) (i.e. for camcorders)

Video input (AVS)

Audio input right

Audio input left

Mains

switch

Antenna/cable/analogue/digital

Center audio input (analogue)

Audio input left/right (analogue)

Audio output left/right (analogue)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Socket for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Service socket

Euro-AV-

Euro-AV-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA/XGA input

socket1

socket2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Satellite connection socket

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDMI (DVI) input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital audio output

 

 

 

 

 

 

 

 

 

 

 

 

Digital audio input

 

 

 

 

 

 

Component video inputs (Cb/Pb–Cr/Pr–Y)

Retrofitting option for satellite tuner, see pages 44 and 45.

5 -

Connections to rear panel – Xelos A 32/37 and Modus L 32/37

Common Interface

(CI-Slot)

Headphones connection

S-VHS connection (AVS)

(i.e. for camcorders)

Video input (AVS)

Audio input right

Audio input left

Mains switch

Antenna/cable PIP tuner

 

 

 

 

 

 

Center Audio input (analogue)

 

 

 

 

 

 

or satellite antenna

Satellite antenna

 

 

 

 

 

Audio input left/right (analogue)

 

 

 

 

 

(Sat tuner 1)

(Sat tuner 2)

 

 

 

 

 

 

 

 

 

Audio output left/right (analogue)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna/cable

Euro-AV-

Euro-AV-

Component

 

 

 

 

 

 

 

 

 

Socket for

analogue/digital

socket 1

socket 2

video inputs

 

 

 

 

 

 

 

 

 

power cable

(tuner 1)

 

 

(Cb/Pb–Cr/Pr–Y)

 

 

 

 

 

 

 

 

 

Service socket

 

 

 

 

 

 

 

 

 

 

 

Antenna output PIP tuner

 

 

 

 

 

 

 

 

 

VGA/XGA input

 

 

 

 

 

 

 

 

 

connect to tuner 1

 

 

 

 

 

 

 

HDMI (DVI) input

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital audio output

 

 

 

 

 

 

 

 

 

 

 

 

Digital audio input

 

 

 

 

 

Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.

- 6

Connections to rear panel – Xelos A 42 and Modus L 42

Common

 

 

 

 

 

 

 

 

Audio input left

interface

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Audio input right

(CI-Slot)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Video input (AVS)

 

 

 

 

 

 

 

 

 

S-VHS input (AVS)

 

 

 

 

 

 

 

 

 

(i.e. for camcorders)

 

 

 

 

 

 

 

 

 

Headphone connection

89352.001

ANT -SAT

 

AUDIO IN

 

AUDIO OUT

 

 

Mains switch

 

13/18 V

/350 mA

 

C L

R

L R

HDTV IN

SERVICE

 

ANT -TV

AV 1

AV 2

SD/HD-COMPONENT IN

AUDIO DIGI TA L

HDMI (DVI )

 

 

5 V

/80 mA

 

( RGB / YUV )

Cb/Pb Cr/Pr

Y

IN OUT

VGA/XGA

 

Power cable

 

 

 

 

 

 

Center Audio input (analogue)

 

 

 

 

 

 

 

 

 

Antenna/cable PIP tuner

Audio input left/right (analogue)

or satellite antenna

Audio output left/right (analogue)

(Sat tuner 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna/cable

 

 

Euro-AV-

Euro-AV-

 

 

 

 

 

 

 

 

 

 

 

 

 

Service socket

 

 

 

 

 

 

 

 

 

 

 

 

 

analogue/digital

 

 

socket 1

socket 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VGA/XGA input

(tuner 1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna output PIP tuner

 

 

 

 

 

 

 

 

 

 

 

HDMI (DVI) input

 

 

 

 

 

 

 

 

 

 

 

 

connect to tuner 1

 

 

 

 

 

 

 

 

 

 

 

Digital audio output

 

 

 

 

 

 

 

 

 

 

 

or satellite antenna

 

 

 

 

 

 

 

 

 

Digital audio input

 

(Sat tuner 2)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Component video inputs (Cb/Pb–Cr/Pr–Y)

 

 

 

 

 

 

 

 

 

 

Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.

7 -

Welcome

Thank you!

At Loewe, we combine the highest standards of technology, design and user friendliness. This applies equally for TV, video and accessories.

Your new TV set is ideally equipped for the TV standard of the future - “HDTV“ (High Definition Television). With its high-resolution screen and the future-proof digital interfaces HDMI, you have the option to view HD content with excellent picture quality. It therefore carries the European quality mark “HD ready“. Digital TV is steadily spreading via terrestrial reception, in the cable network and via satellite. Loewe supplies sets equipped with DVB-T and DVB-C (DVB-C not for

UK). A digital satellite tuner (DVB-S) can be retrofitted. The DVB integrated within the TV set is operated via the TV set menus using the remote control.

We have designed this TV set so that it is easy to operate by using menus. Information about settings in menus is shown automatically; this enables you to understand the context quickly.

You will find the answers to many of your technical queries in the index of your TV. If you want to operate the TV, you can access functions directly from the index. This saves you from having to read through detailed operating instructions and is the reason why this operating manual only explains the most important operating steps.

Integrated features

The maximum equipment is described in these operating instructions. Functions indicated by are not available in all TV sets. Menu contents may differ from the ones shown, depending on how your TV is equipped.

You can display how your set is equipped in the “Integrated features“ index (press the INFO button in the TV mode if no menu is displayed; the “Integrated features“ menu item is also displayed in the index before the initial letter A).

There are separate operating instructions for Digital Recorder +.

Scope of delivery

LCD-TFT TV set or plasma TV set

Table stand mounted

Mains cable for LCD-TFT TV sets

Assist remote control with 2 batteries

Marketing and service card

3 cable loops for plasma TV sets

These operating instructions

Transporting

Only transport the unit in an upright position. Hold the set by the top and bottom edges of the housing. The plasma/LCD screen is made of glass and/or plastic and may break if not handled carefully. Should the LCD screen become damaged or should the liquid crystal begin to leak, then it is imperative you wear rubber gloves when removing the set. Should the liquid come in contact with your skin, thoroughly rinse with water immediately.

Installation options

As a desktop unit

A table stand is already mounted on the set.

As a wall-mounted unit

Wall holder WM52 for Xelos A 26, Loewe order no. 63493A00.

Wall holder WM53 for Xelos A 32/37 and Modus L32/37, Loewe order no. 63493A10.

Screen Wall Mount 1 for Xelos A 26/32 and Modus L 32, Loewe order no. 66484B00

(Only in connection with VESA adapters, see accessories on page 44).

Screen Wall Mount 2 for Xelos A 37 and Modus L 37,

Loewe order no. 65493B00 (Only in connection with VESA adapters, see accessories on page 44).

Wall holder WM61 for Xelos A 42 and Modus L 42, Loewe order no. 64495L00.

As unit mounted on a rack for Xelos A 32/37 and Modus L 32/37

Xelos Rack, Loewe order no. 64496.A00.

Or Flat-TV F-Stand 3, Loewe order no. 64498A00.

As a rotating, free-standing unit mounted on a rack for Xelos A42 and Modus L42

• Xelos 42 Rack, Loewe order no. 64496A01.

Note on the LCD screen

The TV set with an LCD screen you have purchased meets the highest quality requirements and has been tested for pixel errors. Despite the utmost caution in production of the displays, it cannot be totally ruled out that some of the pixels might be defective for technological reasons. Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard.

- 8

Welcome

Note on the plasma screen (Xelos A 42 and Modus L 42)

IMPORTANT!

PLASMA SCREEN TECHNOLOGY IS NOT SUITABLE FOR THE DISPLAY OF FIXED IMAGES FOR EXTENDED PERIODS OF TIME.

A fixed image displayed for an extended period can cause permanent “image retention” to appear on your Plasma screen.

Examples of fixed images include logos, video games, computer images, teletext, interactive applications and images displayed in 4:3 mode etc. If using such applications it is advised to reduce the “Contrast” setting to minimise the risk of image retention. It is recommended that these images are not displayed for long periods.

Note: Permanent “image retention” on a Plasma TV resulting from fixed image use is not an operating defect and as such is not covered by the warranty.

You will be reminded of this warning through an on screen message after switch on. It will not appear if it is deactivated in the menu. To do this press “Menu“ followed by selection of “Settings“ – “Miscellaneous“ –“On screen displays“

– “Automatic Info.“ then finally select “No“, alternatively it will automatically stop appearing after the menu has been entered twenty times.

The TV set with plasma screen you have purchased meets the highest quality requirements and has been tested for pixel errors. Despite the utmost caution in production of the displays, it cannot be totally ruled out that some of the pixels might not light up for technological reasons. Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard.

For plasma screens, the emission of light decreases the longer the unit is used. Plasma screens work by using phosphor. In certain operating conditions, this technology may facilitate image burns. These operating conditions include:

Lengthy, continuous display of a freeze picture (>10 minutes).

Constant display of the same background.

Use of a format that does not entirely fill the screen (such as 4:3) for a longer period of time.

Once an image is burnt into the display, it is usually not possible to remedy the problem; this situation is neither covered by the warranty nor by the guarantee. To avoid or reduce image burns on your screen, please follow these instructions and recommendations:

During the first 100 hours of operation, you should display moving pictures for the most part or freeze pictures that change frequently; these images are to fill the entire screen.

Use your screen in a full-screen format (16:9).

If you use the screen as a PC monitor, always activate the screen saver.

Switch the TV set off when it is not being used.

Reduce the contrast and brightness as much as possible.

The “DRM“ function (Digital Refresh Mode), which can be called in this set, may be able to eliminate or reduce minor visible effects.

Call up the Index using the INFO button on the remote control, select “DRM (Digital Refresh Mode)“ and start the Refresh mode by pressing the OK button. Alternating full-screen colour images will be displayed now instead of the TV picture. Run the Refresh mode for about as long as a freeze picture was displayed earlier. End the Refresh mode by pressing any button on the remote control.

Any effects resulting from an excessively long display of a freeze frame cannot be reversed using the “DRM“ function.

Cleaning

Use only a soft, clean, damp cloth to clean the TV set, the screen and remote control (do not use any caustic or abrasive cleaning agents).

Disposal

Packing and box

You have chosen a long lasting technical product of very high quality. We have paid a fee to authorised recyclers who will collect the packing from your dealer for disposal, pursuant to domestic regulations. Nevertheless, we recommend you to keep the original box and packing material for optimum protection if you have to transport the set.

The set

Attention: The EU directive 2002/96/EC regulates the proper

way to recycle, handle and utilise used electronic devices. Hence, all used electronic devices are to be disposed of separately. Please do not dispose of this set in the normal household rubbish.

You may return your used set free of charge at designated recycling centres or at your specialist dealer whenever you purchase a new, comparable set. You can find out more about recycling (also for countries outside the EU) from your local government.

9 -

10 cm
10 cm
10 cm

For your safety

For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions:

This TV set is designed exclusively for reception and reproduction of video and audio signals.

• This equipment is designed for domestic and office environments and must not be used in rooms with high humidity (e.g. bathroom, sauna) or high concentrations of dust (e.g.

workshops). If the equipment is used in the open air, ensure that

it is protected against moisture (rain, drips, splashes, sprayed water or dew). Do not place any containers filled with liquids or lit

candles on top of the TV. High levels of moisture and con- centrations of dust cause leakage currents in the equipment, which

can lead to danger of electric shock or fire.

The manufacturer‘s warranty is only valid for use in the specified permissible environment.

If you have moved the TV set out of the cold into a warm environment, leave it standing for about an hour since condensation may form.

This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate; use the power cable provided. Incorrect voltages can damage the equipment.

Like all electronic equipment, your TV needs air for cooling. Obstruction of the

air circulation can cause fires. Therefore the air vents on the back must always be kept free. Please do not place newspapers

or cloths on/over the TV. If the TV is placed in a cabinet or on a shelf, leave at least 10 cm at the sides and 10 cm at the top to ensure sufficient air circulation.

Position the set so that it is not exposed to direct sunlight and additional

heating from radiators.

Prevent any metal parts, needles, paper clips, liquids, wax or the like from getting into the TV set through the air venting slits in the rear panel. This can lead to short-circuits and possibly to fire. If something should get into the inside of the TV set, pull out the plug immediately and notify customer service.

Never remove the back of the TV set yourself. Repair and servicing of your TV set should only be carried out by authorised TV technicians.

Place the TV set on a level, firm base. The set should not protrude at the front when installing in cabinets or shelves.

Only use original accessories if possible, e.g. Loewe wall holders and stands. Never let children handle the TV unattended.

Do not allow children to play in the immediate vicinity of the TV, they could knock, shift or pull it over and injure someone.

Never leave the TV on unsupervised.

Do not install the TV where there may be vibrations. Vibrations can lead to material stress.

Pull out the power and antenna cables during thunderstorms. Surge voltages caused by lightning strikes can damage the TV through the antenna system and the mains. Also remove the antenna and mains plugs in long periods of absence.

The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time.

Lay the mains cable in such a way that it will not be damaged. The power cable may not be kinked or laid over sharp edges, not stood on and not exposed to chemicals, the latter also applies to the device as a whole. A mains cable with damaged insulation can lead to electric shocks and is a fire risk.

When removing the mains plug, pull the plug housing and not the cable. The wires in the plug could be damaged and cause a short circuit the next time it is plugged in.

- 10

First installation

Remote control

Batteries

To insert or change the batteries, press on the arrow. Slide the battery compartment cover downwards and remove it. Insert LR 03 alkaline-manganese batteries (AAA) and ensure that the + and - ends are positioned correctly.

Then push the cover back on from the bottom.

LR03

AAA

AAA

 

LR03

 

Connection

Power mains

Remove the cover for the connections.

Connect the TV set to a 220-240V/50- 60 hertz power outlet. For the LCD sets, plug the small plug of the mains cable into the mains socket on the rear of the TV set; plug the large mains plug into a mains socket. For Plasma sets, the mains cable is permanently connected to the set.

Antennas

Plug the antenna plug of your antenna/cable system or the room antenna for DVB- T into the ANT-TV socket (Tuner 1).

 

 

220-240V~

ANT-TV

ANT-SAT

50/60Hz

Xelos A 26

Note on disposing batteries:

The batteries provided contain no harmful materials such as

cadmium, lead or mercury.

Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.

Setting up the remote control for operating the TV

 

 

220-240V~

ANT-TV

ANT-SAT

50/60Hz

Xelos A32/37

Modus L32/37

Press the TV button

How to operate other Loewe equipment is described on page 39.

TV

R

 

 

ANT -SAT

 

 

13/18 V

/350 mA

 

 

ANT -TV

 

AV 1

AV 2

 

 

 

 

 

( RGB / YUV )

5 V

/80 mA

 

 

 

 

 

 

 

 

 

AUDIO IN

 

AUDIO OUT

 

 

 

 

 

 

C

L

R

L

R

SERVICE

 

SD/HD-COMPONENT IN

AUDIO DIGI

TA L

HDTV IN

 

C /P

C /P

Y

IN

OUT

HDMI (DVI ) VGA/XGA

 

Xelos A42

Modus L42

11 -

First installation

If the reception conditions are good, then a room antenna may be used for DVB-T. Passive and active room antennas are available on the market. The power is supplied for an active antenna via the antenna connection. For automatic programming or in “TV Menu – Connections – Antenna DVB – Antenna DVB-T,“ the distribution voltage (5 volts) is to be set correspondingly.

It may be practical to use a nondirectional antenna. If the location is outside the normal transmitting range, then a unidirectional antenna may also be used to improve the reception quality.

You can find out more on the digital stations that can be received in your area at your specialist dealer.

If a set was retrofitted with a PIP tuner or if this is already integrated in a set with a digital recorder, then plug the antenna into the antenna input of the PIP tuner and connect the PIP tuner output with the ANT-TV socket (Tuner 1). See illustrations on page 6/7.

Set-specific equipment and retrofitting options for PIP and satellite tuners, see pages 44 and 45.

If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite antenna system to the ANT-SAT socket.

If a Digital Satellite Tuner 2 has been retrofitted, connect one antenna cable each, for example from the antenna switch or from the twin LNC, to both SAT sockets.

When laying the cable, use the cable clips affixed beneath the TV set. Replace the connection cover on the TV set.

Use of the binders for Xelos A42 and Modus L 42

The enclosed binders are intended for holding the connection cables together and fastening them to the rear panel.

The binders can be opened again by pressing on the binder latch.

Using the conditional access module

In order to be able to receive encrypted digital stations, a Conditional Access module (CA-module (1) and a Smart Card (1, if necessary, must be inserted into the corresponding slot of your TV set. You can find the Common Interface slot (CI-Slot) on the back of your TV set, see the illustration on pages 5 –7.

1. Make sure the TV set is switched off with the mains switch on the set.

2. First push the smart card into the CA module as far as it will go. Insert it so

that the side with the

 

 

 

 

 

 

 

 

 

 

golden contact chip faces

 

side

 

 

 

the side of the module

 

 

 

 

 

Contact

 

 

 

printed with the supplier‘s

 

 

 

 

brand logo. Printed arrows

 

 

 

 

 

 

 

 

 

indicate how to insert the

 

 

 

 

 

card. Also follow the instal-

 

 

 

 

lation instructions included

 

 

 

 

 

 

 

 

with the smart card.

 

 

 

 

3.Slide the CA module (1 carefully into the slot with the contact side facing the front. When you are standing in front of the TV set, the logo on the CA module must face the rear.

Make sure the module is not twisted in the process. Do not use force.

When the module locks, the eject button is pressed outwards.

(1 The CA module and the smart card are not included in the scope of delivery for this set; you can usually obtain them at your specialist dealer.

Eject button

CA module

CISlot-

Switching on

Press the mains switch. The indicator lamp on the set now turns red (standby mode).

 

Switch on the set using the switch integrated in the indicator.

)

The indicator on the TV set lights up and turns green (indicator

lamp).

 

- 12

ANT TV
ANT SAT Connect/disconnect Back
DVB-T
DVB-C
DVB-S
ANT TV
ANT TV
Antenna cable(s) for: Antenna/cable (analogue)
to antenna socket(s):
Initial installation Connect antenna cable(s)

First installation

Automatic programming

Automatic programming of the TV set is started the first time you switch it on. Follow the menus.

Settings can be selected by pressing one of the directions ...

... and confirm your settings by pressing OK. You then go to the next menu.

Back to the previous menu.

1.First you have to select the menu language.

2.By pressing the OK button, you can call the menu “Connect antenna cable(s)“. If you want to receive digital stations via satellite, then choose “DVB-S“ - confirm using the yellow coloured key. If you also want to receive digital terrestrial

stations (DVB-T), then select “DVB-T“. Also select “Antenna/cable (analogue)“ - this way the standard analogue stations can also be searched for

and saved. If you can receive digital

stations from the cable network, then OK Proceed select “DVB-C“ using the yellow

coloured key.

3.For the country-specific station sorting and for presettings for DVB-T and DVB-C, enter the location at which the TV set is operated.

4.If you have selected “DVB-T“, you then reach the menu “Antenna DVB-T“. If you use an active antenna, then select “yes (5V)“.

5.If you have selected “DVB-C“, you generally leave the symbol rates and modulation types unchanged.

If other symbol rates are used in your cable network for broadcasting, enter the values with the numeric buttons of the remote control. If only one symbol rate is used, enter the same value for both symbol rates. If other modulation types are used for broadcasting in your cable network, select them in the menu. If only one modulation type is used, select “none“ for modulation type 2.

If necessary, ask your specialist dealer about the necessary settings for your cable network.

6.In the “Select satellite installation“ menu, make the selection that corresponds to your satellite antenna installation.

Note: If you have any questions on how your satellite antenna installation is configured and on the antenna settings, consult your antenna installer or your specialist dealer.

7.Select the satellite the antenna is directed at, such as ASTRA1.

If you only receive one satellite...

8.In the following menu, specify whether the station search should take place in the high and low band (“Yes“) or only in the low band (“No“).

Note: For most satellites, a station search is required in both bands.

9.For the low band and high band, the standard frequencies 9750 MHz (9.75 GHz) and 10600 MHz (10.6 GHz) are preset.

If your satellite antenna is equipped with an LNC (LNB) with a divergent oscillator frequency, specify the corresponding frequency for low and high band respectively.

Note: The correct display of the received frequencies in the “TV menu – Settings

– Channels – Manual adjustment“ depends upon this setting.

10.You should receive a picture with sound with the settings previously made (only for ASTRA 1 and HOTBIRD). Then press OK.

11.In the “Pre-programming“ menu, select the factory-set pre-programming to programme the satellite stations quickly.

To ensure all stations that can be currently received are searched for and saved, select “No“ at this point.

Symbol rates: The standard symbol rates 22000 and 27500 are preset. If you would like to receive stations with different symbol rates, specify the corresponding values here using the numeric buttons on your remote control.

12.Press OK to obtain an overview of the settings with which the automatic programming is to take place.

13.Press the OK button again and the station search will start. The TV set searches for, sorts and saves all the TV stations that can be received, according to your settings and the antennas connected.

14.When the TV stations are saved, you will receive a corresponding message.

15.Press the OK button and the set then searches for the radio stations.

16.The TV set searches for, saves and sorts all radio stations which can be received with your antenna system.

17.Then log on your video equipment, decoder and audio system using the connection wizard and connect these to the TV according to the connection diagram

displayed. If you want to connect other equipment later, you can find information as of page 32.

You can repeat the initial installation at any time, e.g. after moving house. Call the index using the INFO button (in the TV mode, if no menu is opened). Select the index item “Repeat initial installation“ (you will find this listed separately before the letter A). Press OK to start the initial installation.

Note: For DVB-T stations in UK the stations are tied to “Logical Channel Numbers”

– “LCN” and sorted from 1–799. Digital station without “LCN” are stored from 800 onwards. Analogue stations are stored from1001.

Station sorting

Note: not with DVB-T stations in UK.

You can change the station sorting that was carried out automatically later at any time, see “TV menu – Settings – Stations – Change stations“.

13 -

First installation

Daily operation

Directing DVB-T antenna

Note: not with DVB-T stations in UK.

If you use a room antenna to receive one or more DVB-T stations that have picture and sound interference, then you should change the location of where the antenna is set up. To help you direct your antenna or to help you determine the most suitable location to set up the antenna, your TV set has a display for the signal quality C/N and the signal strength Level.

Consult your specialist dealer to find out which channels and frequency bands (VHF or UHF) are used to broadcast the digital TV stations in your area.

On any one channel, several digital stations are broadcast.

Select a TV channel

 

 

1.

Call the “TV menu“ via the MENU button.

 

2.

Use

to select “Settings“, then use

to select the menu line underneath.

3.

Select “Stations“, then use

to select the menu line underneath.

TV menu

Settings

 

INFO END

 

 

Stations

Parental lock Timer functions Language

 

 

 

Manual adjustment

...

 

4. Select “Manual adjustment“ and call the menu using OK (not possible for MHEG-5 device versions x27/28).

Manual adjustment

 

 

 

 

 

Signal source

DVB-T

DVB-C

Antenna/cable (analogue

Channel

E 05

 

 

Frequency

177.50 MHz

 

 

Name

Test

 

 

Bandwidth

7 MHz

 

 

C/N 96

 

 

 

Level 99

 

 

 

END

 

 

 

 

 

 

 

 

5.For digital stations, select “Signal source – DVB-T“.

6.Use the numerical buttons to specify the corresponding channel number. Depending on the channel selected and country, the system automatically sets the corresponding bandwidth of 7 or 8 MHz. You should only change the bandwidth under special circumstances - if the channel raster in your area is different from the standard.

When you receive a digital station, the system displays the signal quality C/N via a bar/numeric value and the signal strength via Level. The antenna‘s

direction or position is best when the largest values possible are displayed (long bar) for the signal quality and signal strength.

7.Direct the antenna so that the largest numerical value/bar size is reached.

8.If no signal is found in the channel set, you can start the frequency search run by pressing the blue coloured key within the band selected.

9.Check the other channels one after another on which digital stations are broadcast terrestrially in your area.

For the weakest station, direct the antenna so that the maximum numerical value/bar size is achieved.

10.After you position or direct the antenna, we recommend to search for all the stations using the “Search wizard“ (TV menu – Settings – Stations – Search wizard).

Switching on/off

Your TV is equipped with an eco-standby power supply unit. On standby, the power consumption drops to low power. If you want to save even more electricity, switch the set off with the mains switch. However, please bear in mind that EPG data (electronic programme guide) will be lost, and programmed timer recordings will not be performed by the TV.

 

Switching off

 

If the TV set is switched on, you can switch it to standby using

 

the On/Off button O on the remote control or by using the

 

indicator field on the set. The red lamp on the TV set lights up.

 

If the lamp is orange, a timer recording is being made, EPG data

)

is being captured or radio operation without screen display is

active.

 

 

Switching on the TV set

 

From standby, it is best to switch the set back on using the

 

On/Off button O or by using the numeric buttons of the remote

 

control (0 – 99).

 

Or use the switch integrated in the indicator on the set.

)

The green indicator on the TV set lights up.

 

Or switch on the TV set with OK, you can then see the station

 

list and select a station.

 

Switching on the radio

 

With the RADIO button on the remote control

 

or

 

with R on the control ring of the TV set, you can switch on the

 

radio.

)

 

If you switch off the TV set using the mains switch on the set, the indicator no longer lights up.

If the TV set is switched off via the mains switch, then you have to first switch it into standby mode via the mains switch and then switch it on with the remote control or by using the indicator window on the set.

- 14

Loading...
+ 32 hidden pages