|
|
|
|
Tangent™ Track Lighting System FX |
||
Page |
of 3 |
|
|
|
|
|
|
|
|
47 5/8 in [1210 mm] |
|
FX04 |
|
3/16 in |
|
|
95 5/8 in [2489 mm] |
3/16 in |
FX08 |
|
[4.8 mm] |
|
|
143 5/8 in [3648 mm] |
[4.8 mm] |
||
|
|
FX12 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
FX25 |
|
|
|
|
|
|
FX61 |
5 |
|
|
|
|
5 |
FX48 |
|
|
|
|
FX52 |
||
|
|
|
|
|
4 |
|
|
|
|
|
|
FX53 |
|
|
|
|
|
|
|
|
|
|
|
3/8 in [9 mm] |
|
|
FX53 |
|
|
|
|
|
FX54 |
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
FX55 |
|
|
|
|
|
|
|
|
|
|
|
|
|
FX87 |
|
|
|
|
3/4 in [19 mm] |
|
FX89 |
|
|
|
|
|
FX100 |
|
|
|
|
|
|
|
|
|
|
|
3 |
3 |
|
|
|
|
|
2 |
|
|
|
Ordering Information |
|
|
|
|
|
|
Catalog No. |
|
Finish |
Description |
|
Track Mountings |
|
FX04 |
|
Clear Anodized |
4' Track |
|
Tangent Surface Track may be ceiling, |
|
FX08 |
|
Clear Anodized |
8' Track |
|
vertical-wall or horizontal-wall mounted. |
|
FX12 |
|
Clear Anodized |
12' Track |
|
Mounting anchors or clips must be placed |
|
FX25 |
|
Clear Anodized |
Mounting Anchors (5pk) |
no more than 3’ apart for continuous |
|
|
FX48 |
|
Silver |
Surface Power Feed |
|
ceiling-mounted runs, and no more than |
|
FX61, FX61WH |
Silver, White |
J-Box Feed Canopy |
|
2' apart for wall-mounted runs. A mounting |
||
FX52 |
|
Silver |
Variable Angle Connector, Mechanical only |
anchor or clip should also be placed 6" from |
|
|
FX53 |
|
Silver |
Variable Angle Connector, Electro/Mechanical |
each end of the track run. Surface mount |
|
|
FX54 |
|
Silver |
Mini-Coupler, Electro/Mechanical |
anchors and grid clips are sold separately. |
|
|
FX55 |
|
Silver |
Mini-Coupler, Mechanical Only |
|
|
|
FX87 |
|
Silver |
Grid Ceiling Mount Clips, Regressed-Edge (5pk) |
|
|
|
FX89 |
|
Silver |
Grid Ceiling mount Clips, SquareEdge (5pk) |
|
|
|
FX96, FX96WH |
Silver, White |
Grid Ceiling Feed Canopy |
|
|
||
FX100 |
|
N/A |
Bending Tool |
|
|
|
Features
Tangent Surface Track is a one-circuit electrical distribution system designed to support and supply all Tangent lighting units in a flexible manner. The track can be installed individually in straight runs or in a variety of patterns using the appropriate connectors. The track can also be bent by hand in the field or with an FX100 bending tool into curves with a minimum radius of 3'. All track lengths can be field cut.
1.Tangent™ Track: Anodized aluminum with a clear protective coating
2.Insulating Liner: Clear polycarbonate; houses conductors
3.Conductor (2): Tin plated copper
4.Polarity Dimple: Identifies the 120V line conductor
5.End Cap: Silver painted polycarbonate
Finish
Tangent track and mounting anchors are anodized aluminum with a clear protective coating. Connectors and end caps are painted in a coordinating silver finish. All painted finishes are baked enamel.
Electrical
Capacity is 20 amps at 120 volts 60Hz per branch circuit. The track units are polarized and continuously grounded throughout. Electrical conductors are contained in the polycarbonate extrusion. Track is intended for wiring to branch circuit building wire with ground. All wiring must be in accordance with National and Local Codes.
Mechanical
Track units plug together using tangent connectors and lock securely to prevent accidental separation. Tangent™ lighting units can be attached at any point along the track, up to 3" from end of Track.
Labels
cULus; Patent Pending
|
|
|
|
|
|
Job Information |
Type: |
|
|
||
|
|
|
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.
© 2007 Genlyte Group LLC • D0907