Lightolier SURGICAL PERIMETER LUMINAIRE 632 User Manual

SECTION 8/Folio R50-10 REV. B

SURGICAL PERIMETER LUMINAIRE SUS SERIES 432/632

Page 1 of 4	2'x4' RECESSED FLUORESCENT, ASYMMETRIC/SYMMETRIC ACRYLIC LENS
	RFI SHIELDED, 4 OR 6 LAMP, T8 OR T12

Features

•Asymmetric/symmetric distribution provides: supplemental illumination to operating table.

•Minimizes contrast between surgical and surrounding areas.

•Meets government specification for Radio Frequency Interference (RFI), MIL-STD 461-A, MIL-STD 462 and MIL-STD 463.

•One radio suppressor per fixture (standard).

•High efficiency 60.9% (6 light) 61.2% (4 light).

•One-piece housing.

•Hemmed over side rails for maximum safety.

•Built-in earthquake clips (pat. no. 5,072,344).

•Flat full-size steel lens frame is gasketed.

•2-1/4" lamp to integral light stop for easy lamp removal.

•Black housing exterior for cooler ballast operating temperature.

MOUNTING METHODS

	G	exposed T-grid ceiling.
		(with flat aluminum frame)
		1/4" max.
			1-1/2" max.
		24"	15/16"
			or 1"
		drywall kit (see options)
			Support
		Type “G”	(by others)
		FIxture

		Drywall Kit
		(See Options)
		Drywall
		(by others)
	Ceiling Opening	15/16"
	24-5/16" x 48-5/16"

earthquake clip before installation

F	plaster ceiling/flanged.

Plaster

Opening 24-1/8"

1-1/8" min.

3-3/4" max.

13/16"

24-11/16"

exposed T-grid ceiling (with flat steel frame)

	1/4" max.
	1-1/2" max.
24"	15/16" or 1"

earthquake clip installed (lay-in grid)

DIMENSIONS

5"

(127mm)

	24" (610mm)
6" (152mm)	2" x 2-1/2" access plate
	with two K.O.s

(7/8" dia.)

		39-1/4" (997mm)
		47-31/32" (1218mm)
Job Information			Type:

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com Technical Information: [phone] • Fax [phone]

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone] We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902

SECTION 8/Folio R50-10 REV. B

SURGICAL PERIMETER LUMINAIRE SUS SERIES 432/632

Page 2 of 4	2'x4' RECESSED FLUORESCENT, ASYMMETRIC/SYMMETRIC ACRYLIC LENS
PHOTOMETRY	RFI SHIELDED, 4 OR 6 LAMP, T8 OR T12
MODEL NO. SUS2GFSMA432120O4	MODEL NO. SUS2GFSMA632120O6

G92056

DATE: 04-06-1992

REPORT NUMBER:

ITL38369

DATE: 8-10-1991

PREPARED FOR:

LIGHTOLIER/GENLYTE

SUS2GFSMA432120O4

CATALOG NUMBER: SUS2GFSMA632120O6

4 F32T8 LAMPS

EACH RATED 2850 LUMENS

LUMINAIRE: FABRICATED METAL HOUSING, WHITE PAINTED REFLECTOR, LINEAR

PRISMATIC PLASTIC ENCLOSURE WITH RFI GRID EMBEDDED

LAMPS: 6 F32T8 LAMPS EACH RATED 2850 LUMENS.

BALLASTS: 2-3 LAMP ELEC. T8

Black housing exterior

MOUNTING: RECESSED

One piece housing has

for cooler ballast

Fully

TOTAL INPUT WATTS: 231.0 AT 120.0 VOLTS

ribbed construction

operating temperature

gasketed

LUMEN TO CANDELA RATION USED: 9.17

for added strength

lens frame

THE 0 DEGREE PLANE IS PARALLEL WITH THE LAMPS.

Hemmed

over

side-rails

Symmetrical

Asymmetrical

for

safe

Distribution

Distribution

handling

ORDERING INFORMATION

Explanation of Catalog Number. Example: SUS2GFSMA632120O6GLR

SU

S

2

FS

MA

32

		SURGICAL
		PERIMETER
		LUMINAIRE:
	BLANK = Standard	Asymmetric/	BODY
		Symmetric
	N = NYC Code		STYLE:
		Distribution

Lens Recessed	S = Static
Fluorescent
Troffer

FIXTURE WIDTH

CEILING TYPE: G = Grid (lay-in) T-bar F = Flanged (overlap)

Z spline and plaster frame

	LENS FRAME:	LAMP QUANTITY:
	FS = Flat full-size	(By others)	LAMP/
	steel frame	4 = 4-Lamp
			FIXTURE
	(fully gasketed)	6 = 6-Lamp
			LENGTH:
	LENS/
			32=T8
	SHIELDING
			(Nominal 48")
	TYPE:

MA = Virgin Acrylic Asymmetric/ Symmetric Distribution (Standard)

VOLTAGE:	OPTIONS:
120 or 277	Add appropriate
	suffix to catalog
	no, ie: (GLR)

	BALLAST:
		<20THD	<10THD
2-2	Lamp Elec. (T8)	SO*	HI*
3-2	Lamp Elec. (T8)	SO*	HI*
1-4	Lamp Elec. (T8)	O4*	H4*
2-3	Lamp Elec. (T8)	O6*	H6*
LOL Dimming T8		PS	–
*Instant Start Standard

Other dimming options. Consult factory.

OPTIONS & ACCESSORIES

CONTINUOUS ROW INSTALLATION: For F type fixtures, half-width flanges are required between fixtures. Order Catalog Number S2FCTRIM trim (each joint).

PLASTER FRAMES: Catalog Number: PF24. ELECTRICAL WIRING OPTIONS: Consult factory.

SEISMIC HOLD-DOWN CLIP: For type G troffers. SUFFIX: 4HD (For NYC only). FUSING: Internal fast-blow fusing.

SUFFIX: GLR.

Internal slow-blow fusing. SUFFIX: GMF.

RADIO INTERFERENCE FILTER: (If one per ballast is required) 120 or 277 volt, 50 or 60 Hz. SUFFIX: RF. Not available on SUS632 (6 lamp) with 3-2 lamp ballasts. (Fixture comes standard with one RFI filter).

DRYWALL KIT: Order Catalog Number: FK92X4. (Request Folio OA30-10).

CHICAGO PLENUM: SUFFIX: CP.

SPECIFICATIONS

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing is embossed for rigidity with all edges turned up for safe handling. Lens frame— (FS) flat full-size steel frame fully gasketed (standard) to eliminate any light leaks which may be a potential radio wave leak.

Specifications (continued)

FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. LENS: Extruded virgin acrylic asymmetric/symmetric distribution with Radio Frequency Filter (RF) to meet MIL-STD 461-A, MIL-STD 462 and MIL-STD 463.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

Job Information		Type:
Lightolier a Genlyte Thomas Company		www.lightolier.com

Technical Information: [phone] • Fax [phone]

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone] We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902