60ELE
CAF-03
0606
Congratulations on your selection of the Lifebreath Clean
Air Furnace. This is a very advanced unit that combines
an electric furnace with the tremendous health benefits of
year-round fresh air ventilation in every room of your
house.
With the addition of Lifebreath T.F.P. Air Cleaner (optional) you will have the ultimate in comfort and healthy indoor
air quality. (See back cover of this manual)
Once it is correctly installed, safety will never be an issue
with your Lifebreath furnace. No flames, fumes or flue
gases to be concerned about.
This Operating and Installation Guide will help you learn
about your Lifebreath Clean Air Furnace quickly and easily. The table of contents will show you where to find
information on every feature of this unit along with easy to
understand operating instructions. If, however, you do
encounter a question that is not covered in this Guide you
should call the Lifebreath dealer who installed your furnace. Chances are that he will be able to give you a
satisfactory answer but if he is unable to do so then we
invite you to contact us directly.
The purpose of this manual is to act as an
installation guide only for the Lifebreath Clean Air
Furnace.
All national and local code requirements must be met
when installing a Lifebreath Clean Air Furnace. Be sure to
consult the proper authorities.
Introduction ......................................................................1
Table of Contents.............................................................1
General ............................................................................1
Specifications................................................................2-4
Installation...................................................................5-10
Wiring Diagram ..............................................................11
Start-up Procedure.........................................................12
Operation .......................................................................13
Troubleshooting .............................................................14
Maintenance and Service Record ..................................15
Introduction General
Table of Contents
Model 60ELE
“ELECTRIC” CLEAN AIR FURNACE MANUAL
2
Core
Ventilation system has patented aluminum heat
recovery core for energy-efficient ventilation.
Filters
Washable air filters in exhaust and supply air streams of
ventilation section, 1" Pleated in return plenum side.
Case
Prepainted galvanized steel for superior corrosion resistance.
Dimensions & Clearances
Options
99-186 Weatherhoods, Two - 6" c/w
1/4" mesh screen
99-130W Remote Wall Mount Dehumidistat
Control 24 VAC only,
99-122 6” Balancing Damper
99-RSK6 6” Backdraft Damper
Warranty
Units carry a lifetime warranty on the heat recovery core and a
five year replacement parts warranty on all other components.
Specifications 18kw = (60,000 BTUH)
Voltage 240 VAC 60 Hz
Hp 1/3
Amps (total) 85
Stages Single (4 sequence)
Ventilation 6"
Ducts
Return 14" x 22"
Plenum
Supply 17.25" x 16"
Airflow
1350 CFM @ .25 ESP
1180 CFM @ .5 ESP
Ventilation 140 CFM
Airflow
Effectiveness 70%
(HRV)
Note: All connections to be made by qualified contractors.
Net Weight 150 lbs. Shipping Weight 165lbs.
Specifications 60ELE
Side
Front
16"
Duct (coil)
Opening
29.5"
19"
Top
17.25"
12"
6"
4"
6"
14"
*Ventilation
Supply Air
Inlet
*Ventilation
Exhaust Air
Outlet
22"
*Return
Plenum
29.5"
Service Clearance 1'
Latches
CLEAN AIR FURNACE
Blower Section
19"
Service Clearance 3'
47.5"
®
3
Core
Ventilation system has patented aluminum heat
recovery core for energy-efficient ventilation.
Filters
Washable air filters in exhaust and supply air streams of
ventilation section, 1" Pleated in return plenum side.
Case
Prepainted galvanized steel for superior corrosion
resistance.
Dimensions & Clearances
Options
99-186 Weatherhoods, Two - 6" c/w
1/4" mesh screen
99-130W Remote Wall Mount Dehumidistat
Control 24 VAC only,
99-122 6” Balancing Damper
99-RSK6 6” Backdraft Damper
Warranty
Units carry a lifetime warranty on the heat recovery core and a
five year replacement parts warranty on all other components.
Specifications 18kw = (60,000 BTUH)
Voltage 240 VAC 60 Hz
Hp 1/3
Amps (total) 85
Stages Single (4 sequence)
Ventilation 6"
Ducts
Return 14" x 22"
Plenum
Supply 17.25" x 16"
Airflow
1350 CFM @ .25 ESP
1180 CFM @ .5 ESP
Ventilation 140 CFM
Airflow
Effectiveness 70%
(HRV)
Note: All connections to be made by qualified contractors.
Net Weight 150 lbs. Shipping Weight 165lbs.
Specifications 60ELE-DF
Front
Service Clearance 3'
Top
16"
19"
Side
Service Clearance 1'
29.5"
19"
Duct (coil)
Opening
29.5"
17.25"
47.5"
Blower Section
®
CLEAN AIR FURNACE
Latches
14"
*Return
Plenum
22"
*Ventilation
Exhaust Air
Outlet
*Ventilation
Supply Air
Inlet
12"
6"
4"
6"
4
Figure 1
Blower Performance Curve
5
The purpose of this manual is to give the contractor guidelines for installing the Lifebreath Clean Air Furnace. All
national and local codes relating to this type of equipment
must be followed.
Locating The Unit
The Clean Air Furnace is designed to be installed vertically, in a conditioned space,where the surrounding
temperature does not fall below 50°F (10°C). Attic installations are not recommended. Typically the unit is installed
in a mechanical area of the basement, or other
partitioned mechanical room, elsewhere in the home.
A location close to an outside wall is recommended, as
the ventilation supply and exhaust portion will need to be
ducted to the outside air.
Sufficient clearance around the unit is required for service
of the filter, heat recovery core and components.
Duct Connections
To accommodate various installations, the Clean Air
Furnace has knockouts for the return air plenum and ventilation ducts, on both sides of the cabinet. Special care
and attention should be given to determining which knockouts are to be removed. (See Fig. 2 & Fig. 3).
Slide Heat Recovery Core out to remove ventilation
knockouts. Never install ductwork directly to the cabinet
that is smaller than the opening provided.
Figure 2
Option1-Ventilation Ports Off Left Side
NOTE: Return plenum opening can be on either side of cabinet and is not dependent on which side the ventilation ports are on.
Model 60ELE
Model 60ELE-DF
Installation
Remove
styrofoam
knockout
Remove
styrofoam
knockout
Loading...