Life Fitness Parabody 807 User Manual

0 (0)
Life Fitness Parabody 807 User Manual

807 BODYSYSTEM WORKOUT CENTER

WARNING:

Read and follow all directions for each step to insure proper assembly of this product.

USER’S GUIDE

CLASS H

1

Version:

807107

PART # 7052601

 

Revision:

07/09/01

REV. B

 

 

 

TABLE OF CONTENTS

Safety Statement

.............2

General Notes..................

3

Tools Required................

3

Gym Layout.....................

4

Parts list..........................

5

Assembly Instructions.....

6-15

General Maintenance.......

16

Warranty Statement..........

17

Product Services..............

18

Insert-Registration Card

 

IMPORTANT SAFETY INFORMATION

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1.Before using, read all the warnings and instructions on the use of this machine. Use only for intended exercise. DO NOT modify the machine.

2.Obtain a medical exam before beginning any exercise program.

3.Keep body and clothing free of all moving objects.

4.Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or

jammed machine. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.

5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized ParaBody dealer.

7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.

8.Make sure all spring loaded pull pins are fully engaged in the adjustment position and fully tighten thumbscrew before use.

9.Children must not be allowed near this machine. Supervise teenagers.

.

NOTE: In a continual effort to improve our products, specifications are subject to change ©2001 Life Fitness, a division of Brunswick Corporation. All rights reserved. ParaBody is a trademark of Brunswick Corporation

www.parabody.com

2

IMPORTANT NOTES

Please note:

* Thank you for purchasing the ParaBody 807 Gym System. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.

*This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated.

Tools Required for Assembly

*3/4” wrench

*9/16” wrench

*Ratchet with 3/4” and 9/16” sockets

*Adjustable wrench

*Tape measure

Bolt Length Ruler

NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH

BOLT LENGTH RULER:

 

1/2

 

1/2

 

1/2

 

1/2

 

1/2

 

 

1/2

 

0

 

 

1

 

 

2

 

 

3

 

 

4

 

 

5

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

1’

2’

3’

4’

5’

6’

7’

1’

2’

3’

4’

5’

1 Square = 1’ X 1’

4

PARTS LIST

KEY

PART #

DESCRIPTION

QTY

1

7058908

UPRIGHT FRAME

1

2

6407508

BENCH FRAME

1

3

6111002

HEIGHT ADJUSTMENT BAR

1

4

6406602

WOLFF SLEEVE

1

5

6407802

BASE LEG

1

6

6407302

SADDLE

2

7

6407202

LEG EXTENSION NECK

1

8

6024702

LEG EXTENSION

1

9

6406401

HINGE TAB

4

10

6406501

U-PIN

2

11

6125101

ROLLER PAD SHAFT

2

12

6194601

ROLLER PAD

6

13

6654521

SEAT PAD

1

14

6654121

BACK PAD

1

15

3102909

3/8 X 1” BOLT

4

16

3102922

3/8 X 2-3/4” BOLT

1

17

3102904

3/8 X 3” BOLT

2

18

3102910

1/2 X 3” BOLT

1

19

3102501

3/8” WASHER

10

20

3102601

3/8” LOCK WASHER

4

21

3102802

3/8” LOCK NUT

3

22

3102502

1/2” WASHER

2

23

6236701

1-3/4” SQ. END CAP

4

24

3102804

1/2” LOW HEIGHT LOCK NUT

1

25

6412001

3/8” SPRING PIN ASSEMBLY

3

26

6020601

1/2” FLANGE BEARING

2

27

3105401

3/4” STARLOCK COLLAR

6

28

3109602

PAL NUT

2

29

6145801

THUMBSCREW

6

30

3103101

1-1/4 X 5” GRIP

2

31

6416601

PARAGLIDE STRIP (8 ct.)

3

32

3104301

3/4” SQ. RUBBER BUMPER

1

33

6405201

2” SQ. END CAP

6

5

 

28

 

4

 

25

10

31

 

FIGURE 1

 

STEP 1:

Attach eight PARAGLIDE STRIPS (31) to the WOLFF SLEEVE (4) (FOUR ON EACH END) as shown in FIGURE 1 using the following steps:

Thoroughly clean all surfaces where the PARAGLIDE STRIPS are to be attached.

Remove the PARAGLIDE STRIPS from the paper backing and firmly apply them to all shown surfaces.

Insert one U-PIN (10) through the BUSHING of the WOLFF SLEEVE (4) and attach one PAL NUT (28) to the end of the U-PIN (10) as shown in FIGURE 1.

SECURELY assemble one 3/8” SPRING PIN ASSEMBLY (25) to the SPRING PIN HOUSING on the WOLFF SLEEVE (4) as shown in FIGURE 1. (!!! IMPORTANT !!! TIGHTEN THE NUT OF THE SPRING PIN ASSEMBLY SECURELY)

 

1/2

 

1/2

 

1/2

 

1/2

 

1/2

 

 

1/2

0

1

2

3

4

5

6

6

Loading...
+ 12 hidden pages