LEG PRESS ADAPTER KIT FOR GS4 GYM SYSTEM
WARNING:
Read and follow all directions for each step to insure proper assembly of this product.
USER’S GUIDE
CLASS H |
1 |
Version: GS4-LP5A-101 |
PART # 7362701 |
|
Revision: 11/01/02 |
REV. A |
|
|
TABLE OF CONTENTS
Safety Statement |
.............2 |
General Notes.................. |
3 |
Tools Required................ |
3 |
Parts list.......................... |
4 |
Assembly Instructions..... |
4-11 |
Insert-Registration Card |
|
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1.Before using, read all the warnings and instructions on the use of this machine. Use only for intended exercise. DO NOT modify the machine.
2.Obtain a medical exam before beginning any exercise program.
3.Keep body and clothing free of all moving objects.
4.Inspect the machine before use. DO NOT use it if it appears damaged. DO NOT attempt to fix a broken or
jammed machine. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.
5. Be certain that weight pin is completely inserted. Use only the pin provided by the manufacturer. If unsure, call your authorized ParaBody dealer.
6. Never pin the weights or prop plate into an elevated position. DO NOT use the machine if found in this condition. DO NOT attempt to fix. Notify your authorized ParaBody dealer.
7. Inspect cables and their connections before using machine. Pay particular attention to the cable ends. DO NOT attempt to fix. Notify your authorized ParaBody dealer before use and have repairs made by an authorized service technician.
8.Make sure all spring loaded pull pins are fully engaged in the adjustment position and fully tighten thumbscrew before use.
9.Children must not be allowed near this machine. Supervise teenagers.
.
NOTE: In a continual effort to improve our products, specifications are subject to change ©2002 Life Fitness, a division of Brunswick Corporation. All rights reserved. ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
IMPORTANT NOTES
Please note:
*Thank you for purchasing the ParaBody GS4 Leg Press Adapter Kit. Please read these instructions thoroughly and keep them for future reference. This product must be assembled on a flat, level surface to assure its proper function.
*This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated.
Tools Required for Assembly
*9/16” wrench
*Ratchet with 9/16” socket
*Adjustable wrench
*Tape measure
Bolt Length Ruler
NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOLT LENGTH RULER:
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
1/2 |
|
|
1/2 |
|
|||||||||||
0 |
|
|
1 |
|
|
2 |
|
|
3 |
|
|
4 |
|
|
5 |
|
6 |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3
PARTS LIST
KEY |
PART # |
DESCRIPTION |
QTY |
|
KEY |
PART # |
DESCRIPTION |
QTY |
1 |
ACU04-1525 |
CONNECTINGTUBE |
1 |
|
9 |
ACUDA1E03823416NB |
3/8 X 2-3/4” BOLT |
2 |
2 |
ACU04-1526 |
PULLEYHOUSING |
1 |
|
10 |
ACUDA1E03813416NB |
3/8 X 1-3/4” BOLT |
3 |
3 |
ACU02-0055 |
CABLE RETAINER |
1 |
|
11 |
ACUDC1250100020B |
3/8” WASHER |
9 |
4 |
ACU13-0149 |
LEGPRESSCABLE202-3/4 |
1 |
|
12 |
ACUDB2E03811000B |
3/8” LOCK NUT |
14 |
5 |
ACU06-0024 |
3-1/2PULLEY |
7 |
|
13 |
ACU08-0085 |
STEPSPACER 19/32” |
4 |
6 |
ACUDA1E03853416NB |
3/8” X 5-3/4” BOLT |
2 |
|
14 |
ACU08-0076 |
STEP SPACER 1-9/16” |
4 |
7 |
ACUDA1E03843416NB |
3/8 X 4-3/4” BOLT |
5 |
|
15 |
ACU08-0079 |
STEPSPACER 1-11/16” |
2 |
8 |
ACUDA1E03833416NB |
3/8” X 3-3/4” BOLT |
2 |
|
|
|
|
|
NOTE: The LEG PRESS ATTACHMENT (LP5) must be assembled before connecting it to the PARABODY GS1/GS2 GYM SYSTEMS
FIGURE 1
REMOVE LOWER
PULLEY
1
DISCARD!
CABLE
STEP 1:
•Remove END CAP and the bolts attaching the FRAME BRACE and insert new CONNECTING TUBE (1) using same BOLTS and reinstall endcap.
•Remove the LEG CABLE and the BOLT, NUT and WASHER used to secure CABLE to base. Discard CABLE
4