LG SAC33601903, 47LH41, 32CL40, 42LH40, 37LH41 User Manual

...
0 (0)

LCD TV

OWNER’S MANUAL

32LH40

37LH55

32CL40

37LH40

42LH55

42CL40

42LH40

47LH55

47CL40

47LH40

55LH55

 

55LH40

55LH400C

 

32LH41

 

37LH41

 

 

42LH41

 

 

47LH41

55LH41

Please read this manual carefully before operating your set and retain it for future reference.

The model and serial number of the TV is located on the back and one side of the TV.

Record it below should you ever need service.

Model:

Serial:

This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.

Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR.

1-800-243-0000 USA, Consumer User

1-888-865-3026 USA, Commercial User

1-888-542-2623 CANADA

LG Customer Information Center

P/NO : SAC33601903 (0910-REV04)

www.lgusa.com / www.lg.ca

WARNING / CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

2

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

1Do not use this apparatus near water.

2Clean only with dry cloth.

3Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

5Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

6Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

7Only use attachments/accessories specified by the manufacturer.

8Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

9Unplug this apparatus during lighting storms or when unused for long periods of time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

Refer all servicing to qualified service personnel.

 

Servicing is required when the apparatus has

been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3

SAFETY INSTRUCTIONS

11

Never touch this apparatus or antenna during

a thunder or lighting storm.

 

 

12

When mounting a TV on the wall, make sure

not to install the TV by the hanging power and

 

signal cables on the back of the TV.

 

 

13

Do not allow an impact shock or any objects to

 

fall into the product, and do not drop onto the

 

screen with something.

 

 

14

CAUTION concerning the Power Cord:

It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

15 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.

 

 

 

 

 

 

 

 

16

Do not expose to dripping or splashing and do

 

not place objects filled with liquids, such as

vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

17 GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power

Supply

Short-circuit

Breaker

18 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.

19 As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH.

4

20 ANTENNAS

Outdoor antenna grounding

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

 

 

Antenna Lead in Wire

 

 

 

 

Antenna Discharge Unit

 

 

(NEC Section 810-20)

 

 

Grounding Conductor

Electric Service

 

(NEC Section 810-21)

 

 

Equipment

 

Ground Clamps

 

 

 

 

Power Service Grounding

 

 

Electrode System (NEC

 

 

Art 250, Part H)

NEC: National Electrical Code

 

 

Cleaning

21 When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene.

22 Moving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV.

23

Ventilation

 

Install your TV where there is proper ventila-

 

tion. Do not install in a confined space such as

 

a bookcase. Do not cover the product with

 

cloth or other materials (e.g.) plastic while

 

plugged in. Do not install in excessively dusty

 

places.

 

 

24

Take care not to touch the ventilation open-

 

ings. When watching the TV for a long period,

 

the ventilation openings may become hot.

 

 

25

If you smell smoke or other odors coming from

 

the TV or hear strange sounds, unplug the power

 

cord contact an authorized service center.

 

 

26

Do not press strongly upon the panel with

 

hand or sharp object such as nail, pencil or

pen, or make a scratch on it.

27 Keep the product away from direct sunlight.

For LCD TV

28

If the TV feels cold to the touch, there may be

 

 

a small “flicker” when it is turned on. This is

 

normal, there is nothing wrong with TV.

 

Some minute dot defects may be visible on the

 

screen, appearing as tiny red, green, or blue

 

spots. However, they have no adverse effect on

 

the monitor's performance.

 

Avoid touching the LCD screen or holding your

 

finger(s) against it for long periods of time.

 

Doing so may produce some temporary dis-

 

tortion effects on the screen.

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

5

CONTENTS

 

WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 2

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . .

. . 3

FEATURE OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . 8

PREPARATION

 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 9

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

21

Attaching the TV to a Desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Kensington Security System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22

Securing the TV to the wall to prevent falling when

the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . .

24

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Audio out Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Initial Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Channel Setup

- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

- Add / Delete Channel (Manual Tuning) . . . . . . 49

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Favorite Channel Setup / Favorite Channel List . . 52

Brief Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Simple Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

SIMPLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 68

Picture Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Preset Picture Settings (Picture Mode) . . . . . . . . . . . . . 72

Manual Picture Adjustment - User Mode . . . . . . . . . . 73

Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 74

Expert Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Energy Saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Power Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

6

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 82

Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Preset Sound Setting (Sound Mode) . . . . . . . . . . . . . . . . 84

Sound Setting Adjustment - User Mode . . . . . . . . . . . 85

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Stereo/SAP Broadcasts Setup . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

On-Screen Menus Language Selection . . . . . . . . . . . . . . 91

Caption Mode

- Analog Broadcasting System Captions . . . . . . . 92

- Digital Broadcasting System Captions . . . . . . . . 93

- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

TIME SETTING

Clock Setting

- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

External Control Through RS-232C . . . . . . . . . . . . . . . . .116

Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

7

FEATURE OF THIS TV

High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.

This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation. The resulting ISF “day” and “night” modes will then be accessible by the user to experience the best their LG HDTV has to offer.

CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician. Please contact your local dealer to inquire about an ISF certified technician.

The AV Mode optimizes the picture into Cinema, Sports, and game Mode according to the video and audio content. The viewer has the ability to quickly choose the correct mode for the picture they are viewing.

LG TV include a unique invisible speaker system, tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result is a clean, polished look, and enhanced audio by increasing the “sweet spot”, giving a wider and richer sound field.

Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.

is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

Displays HDTV programs in full 1920 x 1080p resolution for a more detailed picture.

Advance 120Hz panel provides clearer, smoother images, even during fast action scenes creating a more stable structure for a crisper picture.

TruMotion 240Hz displays 240 scenes per second by combining advanced 120Hz technology with scanning backlight. This technology is verified from Intertek &TüV Rheinland.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN

/BURN-IN” ON YOUR TV SCREEN

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect ratio setting for an extended period.

8

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images below.

 

 

 

 

RATIO

POWER

 

 

 

 

MENU

 

 

 

 

Q. SLEEP

 

 

 

 

 

MENU

ENERGYINPUT

 

 

 

 

SAVING

 

 

 

 

ENTER

 

 

 

 

RE

 

 

 

 

 

TURN

 

 

 

 

 

INFO

 

 

 

 

MARK

AV

 

 

 

V

M

 

 

 

OL

ODE

 

 

 

 

FAV

 

 

 

1

M

CH

P

 

 

 

UTE

 

GA

 

 

4

2

 

E

 

7

5

 

3

 

 

 

8

6

 

 

 

 

9

 

 

 

 

 

FLASHBK

 

 

 

 

Owner’s Manual

CD Manual

Not included with all models

*

Wipe spots on the exterior only with

 

the polishing cloth.

*

Do not wipe roughly when removing

 

stain. Excessive pressure may cause

Polishing Cloth

scratch or discoloration.

 

 

 

 

 

 

 

Remote Control,

Power Cord

Batteries

 

Option Extras

When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain

standards compliance.

D-sub 15 pin Cable

For 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C

(Except 55LH40, 55LH41,

(Except 47/55LH40, 47/55LH41,

55LH55, 55LH400C)

47/55LH55, 55LH400C)

 

x 4

 

 

Bolts for stand assembly

Screw for stand fixing

Protection Cover

(Refer to P.16)

(Refer to P.22)

 

For 32/42/47CL40

 

 

(Except 47CL40)

(Except 47CL40)

 

x 4

x 4

 

or

 

 

Bolts for stand assembly

Screw for stand fixing

Protection Cover

(Refer to P.14)

(Refer to P.22)

 

PREPARATION

9

PREPARATION

PREPARATION

FRONT PANEL INFORMATION

Image shown may differ from your TV.

32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C

CHANNEL (D,E)

Buttons

CH

VOLUME (+, -)

Buttons

VOL

ENTER Button

ENTER

SPEAKER

MENU Button

MENU

Remote Control Sensor, Intelligent Sensor

Adjusts picture according to the surrounding conditions

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is switched on. (Can be adjusted Power Indicator in the OPTION menu. G p.80)

INPUT Button

INPUT

POWER Button

OFF ON

AC power control switch

10

32/42/47CL40

CH

CHANNEL ( , ) Buttons

VOL

VOLUME (+, -) Buttons

SPEAKER

 

 

ENTER

 

ENTER Button

 

MENU

Intelligent Sensor

MENU Button

INPUT

Adjusts picture according to the

INPUT Button

surrounding conditions

 

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the set is switched on.

Remote Control Sensor

POWER Button

PREPARATION

11

PREPARATION

BACK PANEL INFORMATION

Image shown may differ from your TV.

PREPARATION

9

 

 

 

 

 

 

IN

 

1

 

2

3

4

USB

 

 

 

 

AV IN 1

 

 

/DVI IN

 

 

 

 

 

 

RGB IN (PC)

 

4

 

VIDEO L (MONO) AUDIO R

 

 

 

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

AUDIO IN

OPTICAL DIGITAL

 

 

 

 

 

 

 

2

 

 

2

 

AUDIO OUT

R

 

 

 

 

AUDIO

 

 

 

 

(RGB/DVI)

 

 

L

R

 

 

 

 

1

 

 

1

 

 

L/MONO

VIDEO

AUDIO

 

RS-232C IN

ANTENNA/

 

CABLE IN

 

 

 

 

(CONTROL&SERVICE)

COMPONENT IN

 

 

 

 

7

 

 

6

5

VIDEO

 

 

 

 

AV IN 2

8

2

1

12

1AV (Audio/Video) IN

Analog composite connection. Supports standard definition video only (480i).

2HDMI/DVI IN, HDMI IN

Digital Connection.

Supports HD video and Digital audio. Doesn’t support 480i.

Accepts DVI video using an adapter or HDMI to DVI cable (not included).

3RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).

AUDIO IN (RGB/DVI)

1/8" (0.32 cm) headphone jack for analog PC audio input.

4OPTICAL DIGITAL AUDIO OUT

Digital optical audio output for use with amps and home theater systems.

Note: In standby mode, this port doesn’t work.

5ANTENNA/CABLE IN

Connect over-the air signals to this jack. Connect cable signals to this jack.

PREPARATION

6RS-232C IN (CONTROL & SERVICE) PORT

Used by third party devices.

This port is used for Service or Hotel mode.

7COMPONENT IN

Analog Connection. Supports HD.

Uses a red, green, and blue cable for video & red and white for audio.

8USB INPUT

Used for viewing photos and listening to MP3s.

9Power Cord Socket

For operation with AC power.

Caution: Never attempt to operate the TV on DC power.

13

PREPARATION

STAND INSTRUCTION (For 32/42/47CL40)

Image shown may differ from your TV.

INSTALLATION (Only 32/42CL40)

PREPARATION

1

Carefully place the TV screen side down on a

 

cushioned surface to protect the screen from damage.

2Assemble the parts of the STAND BODY with COVER BASE of the TV by using the 4 screws supplied.

3Assemble the TV as shown.

4Fix the 4 bolts securely using the holes in the back of the TV.

! NOTE

GWhen assembling the desk type stand, make sure the screws are fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.

STAND BODY

COVER BASE

14

LG SAC33601903, 47LH41, 32CL40, 42LH40, 37LH41 User Manual

DETACHMENT

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Loose the bolts from TV.

3Detach the stand from TV.

PROTECTION COVER

After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.

PREPARATION

15

PREPARATION

PREPARATION

STAND INSTRUCTION

(For 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C)

Image shown may differ from your TV.

INSTALLATION (Except 55LH40, 55LH41, 55LH55, 55LH400C)

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the TV as shown.

3Fix the 4 bolts securely using the holes in the back of the TV.

! NOTE

GWhen assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.

16

DETACHMENT

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Loose the bolts from TV.

3Detach the stand from TV.

PROTECTION COVER

After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.

PREPARATION

17

PREPARATION

PREPARATION

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.

 

VESA (A * B)

Wall Mounting Bracket

Model

A

Standard Screw Quantity

 

B

(sold separately)

 

 

32LH40, 32LH41,

200 * 100

M4

4

 

32CL40

 

 

 

 

RW230

AW-47LG30M

37LH40, 37LH41,

 

 

 

 

37LH55, 42LH40,

 

 

 

 

42LH41, 42LH55,

200 * 200

M6

4

 

42CL40, 47LH40,

 

 

 

 

 

47LH41, 47LH55,

 

 

AW-47LG30M

47CL40

 

 

 

 

 

 

55LH40, 55LH41,

400 * 400

M6

4

 

55LH55, 55LH400C

 

AW-55LH40M

! NOTE

G Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.

G Standard dimensions for wall mount kits are shown in the table.

G When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

G Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV.

G For wall mounts that do not comply with the VESA

standard screw specifications, the length of the screws may differ depending on their specifications.

G Do not use screws that do not comply with the VESA standard screw specifications.

Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents.

G LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.

CAUTION G Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.

18

CABLE MANAGEMENT

Image shown may differ from your TV.

For 32/42/47CL40

1Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

2 Install the CABLE MANAGEMENT CLIP as

shown.

CABLE MANAGEMENT CLIP

3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.

PREPARATION

19

PREPARATION

PREPARATION

CABLE MANAGEMENT

Image shown may differ from your TV.

For 32/37/42/47/55LH40, 32/37/42/47/55LH41, 37/42/47/55LH55, 55LH400C

1Connect the cables as necessary.

To connect additional equipment, see the

EXTERNAL EQUIPMENT SETUP section.

2 Install the CABLE MANAGEMENT CLIP as

shown.

CABLE MANAGEMENT CLIP

3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.

20

DESKTOP PEDESTAL INSTALLATION

Image shown may differ from your TV.

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

4 inches

4 inches

4 inches

4 inches

CAUTION G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source.

PREPARATION

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

21

PREPARATION

ATTACHING THE TV TO A DESK

(Except 47/55LH40, 47/55LH41, 47/55LH55, 47CL40, 55LH400C)

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

PREPARATION

Stand

 

1-Screw (provided as parts of the product)

Desk

WARNING

G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

KENSINGTON SECURITY SYSTEM

This feature is not available for all models.

-The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.

-For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System.

For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors.

NOTE: The Kensington Security System is an optional accessory.

22

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

Image shown may differ from your TV.

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. *If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

PREPARATION

! NOTE

G Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

G To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

23

PREPARATION

PREPARATION

To prevent damage do not connect to the power outlet until all connections are made between the devices.

Image shown may differ from your TV.

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box

Connections.

For optimum picture quality, adjust antenna direction if needed.

Wall

Multi-family Dwellings/Apartments

 

(Connect to wall antenna socket)

 

Antenna

 

 

Socket

 

ANTENNA/

 

 

CABLE IN

Outdoor

RF Coaxial Wire (75 ohm)

 

Antenna

 

 

(VHF, UHF)

Single-family Dwellings /Houses

Copper Wire

 

(Connect to wall jack for outdoor antenna)

 

 

 

 

Be careful not to bend the copper wire

 

 

when connecting the antenna.

2. Cable

ANTENNA/

CABLE IN

Cable TV

Wall Jack

RF Coaxial Wire (75 ohm)

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

If the antenna is not installed properly, contact your dealer for assistance.

24

EXTERNAL EQUIPMENT SETUP

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.

Component Connection

1. How to connect

1

Connect the video outputs (Y, PB, PR) of the digital set-

 

top box to the COMPONENT IN VIDEO 1 jacks on

Y PB PR L R

 

 

the TV. Match the jack colors (Y = green, PB = blue, and

 

 

PR = red).

 

 

2

Connect the audio output of the digital set-top box to

1

2

 

 

the COMPONENT IN AUDIO 1 jacks on the TV.

 

 

 

2. How to use

 

1

/DVI IN

L(

AUDIO

 

 

 

 

 

 

 

 

 

 

3

Turn on the digital set-top box.

 

 

 

 

(Refer to the owner’s manual for the digital set-top box operation.)

2

 

2

 

 

 

 

Select the Component1 input source on the TV using the

1

 

1

 

INPUT button on the remote control.

VIDEO

AUDIO

 

 

 

 

COMPONENT IN

 

If connected to COMPONENT IN 2 input, select the

 

 

 

 

Component2 input source on the TV.

 

 

 

Supported Resolutions

 

 

 

Y, CB/PB, CR/PR

 

 

 

 

 

 

 

 

 

 

 

Signal

Component

HDMI

 

Resolution

Horizontal

Vertical

 

 

 

 

 

Frequency(KHz) Frequency(Hz)

 

 

 

 

 

 

 

 

Yes

No

 

 

 

 

480i

 

 

15.73

59.94

720x480i

 

480p

Yes

Yes

 

 

15.73

60.00

 

 

720p

Yes

Yes

720x480p

 

31.47

59.94

 

 

 

 

 

 

1080i

Yes

Yes

 

31.50

60.00

 

 

1080p

Yes

Yes

1280x720p

 

44.96

59.94

 

 

 

 

 

 

45.00

60.00

 

 

 

 

 

 

 

 

 

 

 

 

1920x1080i

 

33.72

59.94

 

 

 

 

 

 

33.75

60.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26.97

23.976

 

 

 

 

 

 

 

27.00

24.00

 

 

 

 

 

1920x1080p

 

33.71

29.97

 

 

 

 

 

 

33.75

30.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

67.432

59.94

 

 

 

 

 

 

 

67.50

60.00

 

 

 

 

 

 

 

 

 

SETUP EQUIPMENT EXTERNAL

25

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

HDMI Connection

1. How to connect

Connect the digital set-top box to HDMI/DVI IN 1,

12, 3, or 4 jack on the TV.

2No separate audio connection is necessary. HDMI supports both audio and video.

2.How to use

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.

!NOTE

G Check HDMI cable over version 1.3.

If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

 

AV IN 1

 

/DVI IN

 

 

VIDEO L(MONO) AUDIO R

RGB IN (PC)

 

 

 

 

 

 

 

3

 

 

 

 

AUDIO IN

O

 

 

 

 

 

 

 

2

 

 

L

R

(RGB/DVI)

 

 

 

 

 

 

 

1

 

O

AUDIO

RS-232C IN

 

MPONENT IN

 

 

 

(CONTROL&SERVICE)

 

1

HDMI OUTPUT

HDMI-DTV

 

 

 

 

 

Resolution

Horizontal

Vertical

Frequency(KHz) Frequency(Hz)

 

 

 

 

 

31.47

59.94

720x480p

31.50

60.00

 

1280x720p

44.96

59.94

45.00

60.00

 

1920x1080i

33.72

59.94

33.75

60.00

 

 

26.97

23.976

 

27.00

24.00

1920x1080p

33.71

29.97

33.75

30.00

 

 

67.432

59.94

 

67.50

60.00

 

 

 

26

DVI to HDMI Connection

1. How to connect

Connect the DVI output of the digital set-top box to

1the H DMI/DVI IN 1, 2, or 3 jack on the TV.

2Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV.

2.How to use

AV IN 1

 

 

/DVI IN

 

L(MONO) AUDIO R

 

RGB IN (PC)

 

 

 

 

 

 

3

 

 

 

 

 

AUDIO IN

OPTICAL DIG

 

 

 

 

 

 

2

 

AUDIO OU

 

 

 

 

L

R

 

(RGB/DVI)

 

 

 

 

 

 

1

 

 

AUDIO

 

 

ANTENNA

 

IN CABLE IN

NT IN

 

 

(CONTROL&SERVICE)

 

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select the HDMI1, HDMI2, or HDMI3 input source on the TV using the INPUT button on the remote control.

!NOTE

G A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

R

 

 

DVI OUTPUT

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETUP EQUIPMENT EXTERNAL

27

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

DVD SETUP

Component Connection

1. How to connect

1

Connect the video outputs (Y, PB, PR) of the DVD to the

Y PB PR L R

COMPONENT IN VIDEO 1 jacks on the TV.

 

 

 

 

Match the jack colors (Y = green, PB = blue, and PR = red).

 

2Connect the audio outputs of the DVD to the

 

COMPONENT IN AUDIO 1 jacks on the TV.

1

2

 

2. How to use

 

1

/DVI

 

 

 

Turn on the DVD player, insert a DVD.

L(

AUDIO

 

 

 

 

 

Select the Component1 input source on the TV using

 

 

3

 

 

 

 

the INPUT button on the remote control.

2

 

2

If connected to COMPONENT IN 2 input, select the

1

 

 

 

 

 

1

 

Component2 input source on the TV.

VIDEO

AUDIO

 

 

Refer to the DVD player's manual for operating instructions.

COMPONENT IN

 

 

 

 

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Y

PB

PR

 

 

 

 

 

 

 

 

 

Y

PB

PR

Video output ports

Y

B-Y

R-Y

on DVD player

Y

Cb

Cr

 

Y

Pb

Pr

 

 

 

 

28

Composite (RCA) Connection

 

 

 

1. How to connect

 

AV IN 1

/DVI IN

 

 

 

 

VIDEO L(MONO) AUDIO R

 

 

 

Connect the AUDIO/VIDEO jacks between TV and

 

 

3

1

 

 

 

DVD. Match the jack colors (Video = yellow, Audio Left

2

 

2

 

 

 

 

 

= white, and Audio Right = red)

 

 

 

 

 

 

1

 

1

 

 

 

VIDEO

AUDIO

 

 

 

 

COMPONENT IN

 

2. How to use

 

 

 

Turn on the DVD player, insert a DVD.

 

1

 

 

 

 

Select the AV1 or AV2 input source on the TV using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions.

VIDEO

L

R

AUDIO

HDMI Connection

1. How to connect

SETUP EQUIPMENT EXTERNAL

Connect the HDMI output of the DVD to the

1H DMI/DVI IN 1, 2, 3 or 4 jack on the TV.

2

No separate audio connection is necessary.

HDMI supports both audio and video.

2.How to use

Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions.

! NOTE

G Check HDMI cable over version 1.3.

If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.

AV IN 1

 

/DVI IN

 

VIDEO L(MONO) AUDIO R

RGB IN (PC)

 

 

 

 

 

3

 

 

 

AUDIO IN

OP

 

 

 

 

 

2

 

L

R

(RGB/DVI)

 

 

 

 

 

1

 

AUDIO

 

A

RS-232C IN C

MPONENT IN

 

(CONTROL&SERVICE)

 

1

HDMI OUTPUT

29

EXTERNAL EQUIPMENT SETUP

VCR SETUP

SETUP EQUIPMENT EXTERNAL

Antenna Connection

 

 

 

 

 

 

 

 

 

1. How to connect

 

 

 

 

 

 

 

 

 

 

 

 

 

RGB IN (PC)

 

 

 

 

 

 

1

Connect the RF antenna out socket of the

 

 

 

 

 

 

 

 

VCR to the ANTENNA/CABLE IN sock-

UDIO IN

OPTICAL DIGITAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO OUT

 

 

 

 

 

 

et on the TV.

 

 

GB/DVI)

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANTENNA/

ANT OUT

S-VIDEO

VIDEO

L

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RS-232C IN

CABLE IN

 

 

 

 

AUDIO

 

 

 

 

(CONTROL&SERVICE)

 

 

 

 

 

 

 

 

 

 

 

 

ANT IN

OUTPUT

 

 

 

2

Connect the antenna cable to

the

RF

 

 

 

SWITCH

 

 

 

 

 

 

 

 

 

 

 

antenna in socket of the VCR.

 

 

 

 

 

Wall Jack

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

2. How to use

Antenna

 

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

30

Loading...
+ 106 hidden pages