LG RH188H, RH199H, RH199, RH188 User Manual

0 (0)

RH1878P1/RH1888P1/RH1979P1/RH1989P1-NA4ULL-ENG

HDD/DVD

RECORDER

OWNER’S MANUAL

MODEL: RH188/RH188H

RH199/RH199H

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION:

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION:

CLASS 2M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED DO NOT

STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

CAUTION:

This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center.

Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT

STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water

(dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric shock or fire.

Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

POWER: This HDD/DVD Recorder operates on a mains supply of 200-240V~, 50/60Hz.

WIRING: This DVD & HDD Recorder is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:

WARNING: A mains plug removed from the mains lead of this DVD & HDD Recorder must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol or coloured green or green and yellow. If any other plug is fitted,

use a 5 amp fuse, either in the plug, or at the distribution board.

IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:

- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this DVD & HDD Recorder may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

This product is manufactured to comply with the radio interference requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

2

Contents

 

Introduction . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .4-9

Symbol Used in this Manual . . . . . . . . . . .

. . . . .4

Notes on Discs . . . . . . . . . . . . . . . . . . . . .

. . . . .4

Recordable and Playable Discs . . . . . . . .

. . . . .5

Playable Discs . . . . . . . . . . . . . . . . . . . . .

. . . . .6

Regional Code . . . . . . . . . . . . . . . . . . . . .

. . . . .6

Availability of copying or moving feature . .

. . . . .6

About the internal hard disk drive . . . . . . .

. . . . .7

Front Panel . . . . . . . . . . . . . . . . . . . . . . . .

. . . . .8

Remote Control . . . . . . . . . . . . . . . . . . . .

. . . . .9

Remote Control Operation . . . . . . . . . . . .

. . . . .9

Hookup and Settings . . . . . . . . . . . . . . . . .

. .10-23

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . .

. . . .10

Connecting to the Aerial . . . . . . . . . . . . . . .

. . .10

Connections to Your TV . . . . . . . . . . . . . . .

. . .11

HDMI connection (RH188H, RH199H only) .

. . .12

Connecting to an Amplifier . . . . . . . . . . . . .

. . .13

Accessory Audio/Video (A/V) Connections

. .14-15

Using the Home Menu . . . . . . . . . . . . . . . .

. . .16

Initial Settings . . . . . . . . . . . . . . . . . . . . . . .

. . .16

General Operation . . . . . . . . . . . . . . . . .

. . .16

General Settings . . . . . . . . . . . . . . . . . . . .

.16-19

Auto Programming . . . . . . . . . . . . . . . .

. . .16

Program Edit . . . . . . . . . . . . . . . . . . . . .

. . .17

Auto Clock Set / Manual Clock Set . . . .

. . .18

TV Aspect / Display Mode . . . . . . . . . . .

. . .18

Progressive Scan (RH188/RH199 only) .

. . .18

AV2 Connection / Power Save Mode . . .

. . .18

Initialization . . . . . . . . . . . . . . . . . . . . . .

. . .19

Language Settings . . . . . . . . . . . . . . . . . . .

. . .19

Audio Settings . . . . . . . . . . . . . . . . . . . . . .

. . .19

Dolby Digital / DTS / MPEG . . . . . . . . .

. . .19

Sampling Frequency . . . . . . . . . . . . . . .

. . .19

DRC (Dynamic Range Control) . . . . . . .

. . .19

Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . .19

Lock (Parental Control) Settings . . . . . . . . .

. . .20

Rating / Set Password / Area Code . . . .

. . .20

DivX Registration Code . . . . . . . . . . . .

. . .20

Recording Settings . . . . . . . . . . . . . . . . . . .

. . .21

Record Mode Set / Record Aspect . . . . .

. . .21

DV Recording Audio / TV Recording Audio .21

Auto Chapter / AV2 Recording . . . . . . . .

. . .21

Disc Settings . . . . . . . . . . . . . . . . . . . . . . .

.21-22

Disc Format . . . . . . . . . . . . . . . . . . . . .

. . .21

Finalize / Disc Label . . . . . . . . . . . . . . .

. . .22

Disc Protect / PBC . . . . . . . . . . . . . . . .

. . .22

General Explanation of On-Screen Display

. . . .23

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . .

.24-34

General Playback Features . . . . . . . . . . . .

.24-27

Playing a DivX Movie File . . . . . . . . . . . . . .

. . .28

Playing an Audio CD or MP3/WMA file . . . .

. . .29

Program Playback with Audio CD and

 

MP3/WMA file . . . . . . . . . . . . . . . . . . . . . . .

. . .30

Viewing a JPEG File . . . . . . . . . . . . . . . . .

.31-32

Editing a MP3/WMA, JPEG, DivX file . . . . . .33-34

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-42

About DVD recording . . . . . . . . . . . . . . . . . . . .35 About HDD recording . . . . . . . . . . . . . . . . . . . .35 Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Basic Recording from a TV . . . . . . . . . . . . . . . .37 Instant Timer Recording . . . . . . . . . . . . . . . . . .37 Timer Recording . . . . . . . . . . . . . . . . . . . . . . . .38 Timer Recording with VIDEO Plus+ System . . .39 Checking Timer Recording Details . . . . . . . . . .40 Recording from an External Input . . . . . . . . . . .40 Recording from DV Input . . . . . . . . . . . . . . . . .41 Simultaneous recording and playback . . . . . . . .42

Playback another title during recording . . . .42 Time Slip . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43-50

Title List and Chapter List Menu Overview . . . .43

HDD, VR Mode: Original and Playlist Editing

. . .44

Adding Chapter Markers . . . . . . . . . . . . . . .

. .44

Changing Title Thumbnails . . . . . . . . . . . . . .

. .44

Making a New Playlist . . . . . . . . . . . . . . . . . .

. .45

Adding Additional Title/Chapters to the Playlist .45

Deleting an Original or Playlist Title/Chapter

. . .46

Deleting a Part . . . . . . . . . . . . . . . . . . . . . . .

. .46

Naming a Title . . . . . . . . . . . . . . . . . . . . . . .

. .47

Time Search . . . . . . . . . . . . . . . . . . . . . . . .

. .47

Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. .48

Undoing/Redoing the Last Deletion . . . . . . .

. . .48

Combining Two Titles Into One . . . . . . . . . . .

. .48

Divide One Titles Into Two . . . . . . . . . . . . . .

. .49

Combining Two Chapters Into One . . . . . . .

. . .49

Moving a Playlist Chapter . . . . . . . . . . . . . . .

. .50

Hide a Chapter/Title . . . . . . . . . . . . . . . . . . .

. .50

Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .

. .50

Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-53

Before Dubbing . . . . . . . . . . . . . . . . . . . . . . . . .51 Dubbing from HDD to DVD . . . . . . . . . . . . . . .52 Dubbing from DVD to HDD . . . . . . . . . . . . . . . .52 One Touch Copy (HDD to DVD) . . . . . . . . . . . .53 One Touch Copy (DVD to HDD) . . . . . . . . . . . .53

Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-59

Additional Information . . . . . . . . . . . . . . . . . . . .54 Overwriting Recording . . . . . . . . . . . . . . . . .54 Viewing Title List menu displayed on other DVD Recorders or Players . . . . . . . . . . . . .54 Playing Your Recordings on Other DVD Players (Finalizing a Disc) . . . . . . . . . . . . . .54

Language Codes . . . . . . . . . . . . . . . . . . . . . . .55 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .55 Controlling Your TV with the Supplied

Remote Control . . . . . . . . . . . . . . . . . . . . . . . .56 Troubleshooting . . . . . . . . . . . . . . . . . . . . . .57-58 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .59

Introduction

3

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.

This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location.

About the Symbol Display

” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.

HDD recorded on the HDD

All DVD discs listed below.

-RAM disc

DVD-RW with VR recording mode

DVD-RW with Video recording mode

DVD+RW disc

DVD-R disc

DVD+R (DL) disc

DVD-Video disc

ideo CDs

Audio CDs

DivX files

MP3 files

WMA files

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Moisture Condensation

Never operate this product immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage discs and internal parts.

4

Recordable and Playable Discs

DVD-RW (Digital Video Disc - ReWritable):

DVD-RW discs can be formatted for VR mode recording or Video mode recording.

These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

[VR mode]

Recordings can be extensively edited

Playable only on VR mode compatible players (after finalization) [Video mode]

Playable on regular DVD players (after finalization)

Limited editing features

DVD-R (Digital Video Disc - Recordable)

These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.

DVD-R discs can be only formatted to Video mode.

Playable on regular DVD players (after finalization)

Limited editing features

DVD-RAM (DVD - Random Access Memory)

DVD-RAM discs can be formatted for VR mode recording.

These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

Playable on DVD-RAM compatible players.

Recordings can be extensively edited.

Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.

You cannot use the cartridge-type DVD-RAM disc in this unit.

DVD+RW (Digital Video Disc + ReWritable)

These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

Playable on DVD+RW compatible players (automatically finalization)

The edited contents are playable on DVD+RW compatible players only after finalization

Recordings can be edited the title/chapter

DVD+R (Digital Video Disc + Recordable)

These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any more.

Playable on DVD+R compatible players (after finalization)

Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.)

Limited title/chapter editing features.

DVD+R DL (Digital Video Disc + Recordable; Double Layer)

These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or edit it any more.

Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up to 8.5GB of video on a single DVD+R disc.

Playable on DVD+R DL compatible players (after finalization)

Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added chapter mark, etc.)

Limited title/chapter editing features.

Recommended recordable DVD discs

DVD-R

DVD+R

DVD-RW

DVD+RW

DVD+R(DL)

DVD-RAM

Mitsubishi (8x, 16x)

Mitsubishi (8x, 16x)

Mitsubishi (4x)

Mitsubishi (4x) Mitsubishi (2.4x, 8x)

Fujifilm (2x)

 

 

 

 

 

 

That’s (8x, 16x)

Ricoh (8x, 16x)

Verbatim (4x)

SONY (4x)

Maxell (2.4x)

Mitsubishi (3x)

 

 

 

 

 

 

Verbatim (8x)

Verbatim (8x)

JVC (4x)

Imation (4x)

-

Maxell (5x)

-

-

Victor (4x)

Maxell (4x)

-

-

 

 

 

 

 

 

-

-

Maxell (4x)

Ricoh (4x)

-

-

 

 

 

 

 

 

Note: If a DVD-RW/DVD+RW discs is recorded using a personal computer or other DVD recorder, you cannot format the disc using this recorder. So if you want to use the disc on this recorder, you must format the disc using the original recorder.

Introduction

5

Playable Discs

DVD (8 cm / 12 cm disc)

Discs such as movies that can be purchased or rented

Video CD (VCD) (8 cm / 12 cm disc)

VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format

Audio CD (8 cm / 12 cm disc)

Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased

CD-R/CD-RW (8 cm / 12 cm disc)

CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.

Notes:

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.

Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable.

DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”.

Notes on Regional Codes

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unit’s regional code or the disc cannot play.

If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code. Can’t play back” appears on the TV screen.

Availability of copying or moving feature

From

To

MP3/WMA

JPEG

DivX

Audio CD

Video CD

Title*1

HDD

DISC

No

No

No

No

No

Yes

DISC

HDD

Yes

Yes

Yes

No

No

Yes

*1 The title is recorded from this unit.

6

About the internal hard disk drive

The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the recorder following the guidelines below to protect against possible HDD failure.

We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss.

Do not move the recorder while it is on.

Install and use the recorder on a stable, level surface.

Do not block the rear vent/cooling fan.

Do not use the recorder in excessively hot or humid places, or in places that may be subject to sudden changes in temperature. Sudden changes in temperature can cause condensation to form inside the recorder. This can be a cause of HDD failure.

While the recorder is switched on, do not unplug from the wall socket or switch the electricity off from the breaker switch.

Do not move the recorder immediately after switching it off. If you need to move the recorder, please follow the steps below:

1.After the message POWER OFF is shown in the display, wait at least two minutes.

2.Unplug from the wall socket.

3.Move the recorder.

If there’s a power failure while the recorder is on there is a chance that some data on the HDD will be lost.

The HDD is very delicate. If used improperly or in an unsuitable environment, it is possible that the HDD will fail after a few years of use. Signs of problems include playback unexpectedly freezing and noticeable block noise (mosaic) in the picture. However, sometimes there will be no warning signs of HDD failure.

If the HDD fails, no playback of recorded material will be possible. In this case it will be necessary to replace the HDD unit.

Introduction

7

Front Panel

a

b

c d e f g h i j k

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RH188/RH188H

 

 

 

 

 

 

 

 

 

l m n

a

b

c d e f g h i j k

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RH199/RH199H

l m n

a POWER button

Switches the recorder ON or OFF.

b Disc Tray

Insert a disc here.

c Display window

Shows the current status of the recorder.

T/S: Indicates the timeshifting mode.

REC: The recorder is recording.

HDD: The recorder is HDD mode.

DVD: The recorder is DVD mode.

HDD b B DVD: The recorder is dubbing.

TV: Indicates when the recorder is in TV tuner mode.

: Indicates when the recorder is in timer recording or a timer recording is programmed.

: Indicates clock, total playing time, elapsed time, title number, chapter/track number, channel, etc.

d OPEN/CLOSE (Z)

Opens or closes the disc tray.

eHDD/DVD

Set the recorder’s mode to HDD or DVD.

fx (STOP)

Stops playback or recording.

8

g N / X (PLAY / PAUSE)

Starts playback.

Pause playback or recording temporarily, press again to exit pause mode.

h z (REC)

Starts recording. Press repeatedly to set the recording time.

i PROG. (V/v)

Scans up or down through memorized channels.

j TIMESHIFT (RH188, RH199)

Activates pause live TV/playback (timeshift) for a live TV program.

j RESOLUTION (RH188H, RH199H)

Sets the output resolution for HDMI and COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks.

-HDMI: 1080i, 720p, 576p, 576i

-COMPONENT: 576p, 576i

k Remote Sensor

Point the recorder remote control here.

l DV IN

Connect the DV output of a digital camcorder.

m AV IN 4 (S-VIDEO IN)

Connect the S-Video output of an external source (TV/ Monitor, VCR, Camcorder, etc.).

n AV IN 4 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).

Remote Control

AV/INPUT: Changes the input to

 

use for recording (Tuner, AV1-4,

 

or DV IN).

 

0-9 numerical buttons: Selects

 

numbered options in a menu.

 

DUBBING: Copies DVD to HDD

 

(or HDD to DVD).

 

TV Control Buttons: See page

a

56.

b

 

 

AUDIO ( ): Selects an audio

 

language or audio channel.

 

SUBTITLE ( ): Selects a subtitle

b

language.

CLEAR: Removes a track number

 

 

on the Program List or a mark on

c

the Marker Search menu.

REC (z): Starts recording.

 

 

REC MODE: Selects the recording

 

mode.

d

TIMER REC: Displays Timer

Record menu.

 

c

 

SCAN (m / M): Search

 

backward or forward.

 

SKIP (. / >): Go to next or

e

previous chapter or track.

PAUSE/STEP (X) : Pause

 

playback or recording temporarily.

 

PLAY (N): Starts playback.

 

STOP (x): Stops playback or

 

recording.

 

d

a

HOME: Accesses or removes the

HOME menu.

POWER: Switches the recorder

MENU/LIST: Accesses menu on a

ON or OFF.

DVD disc. Switches between Title

OPEN/CLOSE (Z): Opens and

List-Original and Title List-Playlist

closes the disc tray.

menu.

DVD: Selects the unit’s function

b / B / v / V (left/right/up/down):

mode to DVD.

Selects an option in the menu.

HDD: Selects the unit’s function

 

mode to HDD.

 

ENTER ()

-Acknowledges menu selection.

-Displays information while viewing a TV program.

PR/CH (+/-): Scans up or down through memorized channels. DISPLAY: Accesses On-Screen Display.

RETURN (O)

Removes the menu.

e

TIMESHIFT: Activates pause live TV/playback (timeshift) for a live TV program.

MARKER: Marks any point during playback.

SEARCH: Displays Marker Search menu.

SETUP: Accesses or removes the Setup menu.

PIP: Selects PIP function on or off. ZOOM: Enlarges video image. TITLE: Displays the disc’s Title menu, if available.

CHP. ADD: Inserts a chapter marker when playing/recording.

I.SKIP (INSTANT SKIP): Skips 15 seconds forward during playback. REPEAT: Repeat chapter, track, title, all.

A-B: Repeat sequence. THUMBNAIL: Selects a thumbnail picture.

TV/DVD: To view channels selected by the recorder tuner or by the TV tuner.

RESOLUTION (RH188H, RH199H only): Sets the output resolution for HDMI.

VIDEO Plus+: To display the program menu for VIDEO Plus+ System programming.

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with and matched correctly.

Introduction

9

Hookup and Settings

Rear Panel

a b

c d e

 

f g

h

i

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

j k l m n

aAERIAL

Connect the aerial to this terminal.

bHDMI Connector (Type A) (RH188H, RH199H only)

HDMI output providing a high quality interface for digital audio and video.

cEURO AV 2 DECODER

Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.).

dAV OUT 3 (VIDEO / AUDIO OUT (Left/Right))

Connect to a TV with video/audio inputs.

eAV IN 3 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).

fCOAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

gOPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

hCooling fan

Connecting to the Aerial

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aerial input socket on your TV set.

RF coaxial connection

Connect the RF. OUT jack on the recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack.

i AC Power Cord

Plug into the power source.

j RF. OUT

Passes the signal from the AERIAL to your TV/monitor

k S-VIDEO OUT

Connect to a S-Video Input on TV.

lEURO AV 1 AUDIO/VIDEO

Connect to a TV with SCART jack.

mVIDEO OUT SELECT Switch

Select either COMPONENT or RGB signal of EURO AV1 AUDIO/VIDEO terminal depending on how you connect the recorder to the TV.

nCOMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)

Connect to a TV with Y Pb Pr inputs.

Rear of TV

Aerial

 

 

 

SCART INPUT

 

ANTENNA

AUDIO INPUT

VIDEO

INPUT

 

INPUT

 

L R

 

R

Rear of the recorder

10

Connections to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set the VIDEO OUT SELECT switch to COMPONENT. When using the SCART jack, set the VIDEO OUTPUT SELECT switch to RGB.

Tips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

Make sure the recorder is connected directly to the TV. Tune the TV to the correct video input channel.

Do not connect the recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

Do not connect your recorder via your VCR. The DVD image could be distorted by the copy protection system.

Rear of TV

S-VIDEO

SCART INPUT

 

 

 

 

 

INPUT

COMPONENT VIDEO INPUT

VIDEO

AUDIO INPUT

 

INPUT

 

 

 

Y

Pb

Pr

 

L

R

S

T

C

V

A

Rear of the recorder

SCART connection

Connect the EURO AV1 AUDIO/VIDEO scart jack on the recorder to the corresponding in jacks on the TV using the scart cable (T).

Video connection

Connect the VIDEO OUT jack on the recorder to the video in jack on the TV using the video cable (V).

Audio (Left/Right) Connection

Connect the left and right AUDIO OUT jacks of the recorder to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

S-Video connection

Connect the S-VIDEO OUT jack on the recorder to the S-Video in jack on the TV using the S-Video cable (S).

Component Video connection

Connect the COMPONENT / PROGRESSIVE SCAN VIDEO OUT jacks on the recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C).

If your television is a high-definition or “digital ready” television, you may take advantage of the recorder’s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder.

RH188/RH199: Set the [Progressive Scan] option to [ON] on the setup menu for progressive signal, see page 18.

RH188H/RH199H: Set the resolution to 576p using RESOLUTION button for progressive signal.

Note:

Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection.

Caution (RH188/RH199 only)

Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

Caution (RH188H/RH199H only)

If the resolution is set to 720p or 1080i, the VIDEO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT connections are not available.

Settings

Hookup and

11

HDMI connection (RH188H/RH199H only)

If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable.

1.Connect the HDMI jack on the recorder to the HDMI jack on a HDMI compatible TV or monitor

(H).

2.Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Notes:

If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 19). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 19).

If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 19). To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

The arrow on the cable connector body should face up for correct alignment with the connector on the recorder.

(Type A)

If there is noise or lines on the screen, please check the HDMI cable.

Tip :

When you use HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RESOLUTION button.

Caution

Changing the resolution when the recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the recorder and then turn it on again.

HDMI compatible TV

HDMI

H

Rear of the recorder

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices.

HDMI was developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Additional Information for HDMI

When you connect a HDMI or DVI compatible device make sure of the followings:

-Try switching off the HDMI/DVI device and this recorder. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this recorder.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720(1440)x576i, 720x576p, 1280x720p, or 1920x1080i video input.

Not all HDCP-compatible DVI devices will work with this recorder.

-The picture will not be displayed properly with non-HDCP device.

12

Connecting to an Amplifier

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic

Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1.Connect one of the recorder’s DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.

2.You will need to activate the recorder’s digital output. (See “Audio Settings” on page 19).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Notes:

If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

To see the audio format of the current DVD in the on-screen display, press AUDIO.

This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

Rear of the recorder

A

X

O

L

R

COAXIAL

OPTICAL

AUDIO INPUT

DIGITAL INPUT

DIGITAL INPUT

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double- D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Settings

Hookup and

13

LG RH188H, RH199H, RH199, RH188 User Manual

Accessory Audio/Video (A/V)

Connections

Connecting a PAY-TV/Canal Plus Decoder

You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder.

To watch or record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 18) and set the program’s [Decoder On/Off] option to [On] on the Setup menu (page 17).

Tip:

You do not need to turn on the recorder to view the signals from the connected tuner on your TV.

Note:

If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected decoder.

TV

PAY-TV/Canal Plus

Decorder

SCART AV

Rear of the recorder

Connecting to the EURO AV2 DECODER jack

Connect a VCR or similar recording device to the EURO AV2 DECODER jack of this recorder.

To watch or record the source from EURO AV2 DECODER jack, set [AV2 Connection] option to [Others] (see page 18) and set [AV2 Record] option to [Auto], [CVBS] or [RGB] as required (see page 21).

TV

VCR, Cable Box, or Satellite Tuner, etc.

Rear of the recorder

Tip:

You do not need to turn on the recorder to view the signals from the connected tuner on your TV.

Notes:

Pictures containing copy protection signals that prohibit any copying cannot be recorded.

If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.

Line input 1

VCR RECORDER TV

Line input 2

When you record to a VCR from this recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote.

If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the EURO AV2 DECODER jack.

If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR or tuner.

14

Connecting to the AV IN 3 or AV IN 4 Jacks

Connect the input jacks (AV IN 3, AV IN 4) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables.

Note:

If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available.

Jack panel of Accessory Component (VCR, Camcorder, etc.)

AUDIO

 

OUTPUT

 

R

 

L

 

VIDEO

 

OUTPUT

OR

S-VIDEO

OUTPUT

 

Connecting a Digital Camcorder

Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD.

Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this recorder.

Note:

This jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks.

DV Digital Camcorder

DV

IN/OUT

Rear of

Front of

 

the recorder

the recorder

Front of the recorder

Settings

Hookup and

15

Using the Home Menu

From the Home Menu screen you can access all the Media for playback and recording of the recorder.

1.Press HOME to display the Home Menu screen.

2.Use the b / B buttons to select a main option you want. Sub options appears.

3.Use the v / V and ENTER buttons to select the sub option you want.

4.To exit the HOME menu, press HOME.

TV

TV HDD: Returns to live TV viewing for HDD recording.

TV DVD: Returns to live TV viewing for DVD recording.

MOVIE

HDD: Displays the Title List menu for HDD. (page 43)

HDD DivX: Displays the [Movie List] menu for HDD. (page 28)

DISC:

-Displays Title List menu for recordable disc (page 43)

-Displays [Movie List] menu for DivX disc. (page 28)

-Plays back Video CD or DVD-Video disc (page 24-27).

PHOTO (See page 31)

HDD: Displays [Photo List] menu for HDD.

DISC: Displays [Photo List] menu for disc.

MUSIC (See page 29)

HDD: Displays [Music List] menu for HDD.

DISC: Displays [Music List] (or Audio CD) menu for disc.

SETUP (See page 16)

Start: Displays Setup menu.

Initial Settings

In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.

General Operation

1.Press SETUP and the Setup menu appears.

2.Use v / V to select the desired option.

3.While the desired item is selected, press B to move to the second level.

4.Use v / V to select the second desired option.

5.Press B to move to the third level.

6.Use v / V to select the desired setting then press ENTER to confirm your selection.

Some items require additional steps.

7.Press SETUP to exit the Setup menu.

Note:

Press b to go back to the previous level.

General Settings

Auto Programming

This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels.

Preparation:

Connect the recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 10.

1.Select the [Auto Programming] option.

2.Press B to move to the third level. [Start] icon is highlighted.

3.Press ENTER to begin the channel search. The tuner will automatically cycle through all

available channels in the area and place them in the tuner’s memory.

Note:

After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options.

16

General Settings (Continued)

Program Edit

You can edit a channel manually (add, delete, name, move, etc.).

1.Select [Program Edit] option then press B.

2.Press ENTER while [Edit] is selected. The Program List menu appears.

3.Use v / V to select a PR number then press ENTER.

4.Use v / V to select the program option then press ENTER.

[Program Edit] Sets the channel manually. See “Program Edit” on the right.

[Station Rename] Changes the station name. The display for entering characters appears. To enter characters, see page 47.

Names can be up to 5 characters long.

[Move] Sorts the programme positions on the Program List. Press v / V to move the selected programme position to a new location.

[Delete] Disables a programme position you do not need.

[Decoder On/Off] Sets the channels for the decoder. You need this setting to watch or record PAY-TV/Canal Plus programmes.

Press ENTER so [Decoder] appears on the display. Press ENTER again to turn off the setting.

[NICAM Auto/off] Sets the channels for the NICAM broadcast. Normally, [NICAM] is lit on the display. If the sound from NICAM broadcast is not clear, press ENTER so [NICAM] disappears.

5.Press RETURN (O) repeatedly to exit Program List menu.

Program Edit

You can perform a search to select and store TV channels manually.

When you select [Program Edit] in step 4 above, the display for setting channels appears.

1.Use b / B to select the item and press v / V to change the setting.

[PR] indicates the selected programme position.

[Seek] Searches for a channel automatically. Searching stops when the recorder tunes in a channel.

[Ch.] Changes the channel number.

[MFT] Fine tunes the channel to obtain a clearer picture.

2.Choose OK then press ENTER to confirm the setting and returns to the Program List menu.

AV1 Decoder

Sets the EURO AV1 AUDIO/VIDEO jack for inputting encoded video signals.

1.Press AV/INPUT while the Program List menu appears.

2.Press ENTER so [Canal+] appears on the display. Press ENTER again to turn off the setting.

Off: Inputs the signals from the EURO AV1 AUDIO/VIDEO jack. Normally select this.

On: The encoded video signal input from the EURO AV1 AUDIO/VIDEO jack is output to the EURO AV2 DECODER jack for decoding.

The decoded signal is then input back through the EURO AV2 DECODER jack so you can record or view PAY-TV/Canal Plus programmes.

Settings

Hookup and

17

General Settings (Continued)

Auto Clock Set

When Channel auto search is completed the actual Time and Date are also set automatically. If the time in the recorder display is not correct, the clock must be set manually.

1.Select [Clock set] option then press B.

2.Use v / V to select [Auto] option then press ENTER.

Note:

There are cases where the TV station does not send, or sends wrong date and/or time information and the recorder sets the incorrect time.

If this happens, we recommend that you set the clock manually.

Manual Clock Set

1.Select [Clock set] option then press B.

2.Use v / V to select [Manual] option then press ENTER.

3.Enter the necessary information for date and time. b / B (left/right): Moves the cursor to the previous or next column.

v / V (up/down): Changes the setting at the current cursor position.

4.Press ENTER to confirm your setting.

TV Aspect

Selects the aspect ratio of the connected TV (4:3 standard or wide).

[4:3] Select this when connecting to a 4:3 screen TV. When you select [4:3], set [Display Mode] below.

[16:9] Select this when connecting to a wide-screen TV or TV with a wide mode function.

Display Mode

Selects how to display a wide picture on the screen when [4:3] is selected in [TV Aspect].

[Letter Box] Displays a wide picture with bands on the upper and lower portions of the screen.

[Pan Scan] Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit.

Progressive Scan (RH188/RH199 only)

Progressive Scan Video provides the highest quality pictures with less flickering.

If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to [OFF].

If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to [ON].

Note:

Progressive Scan will be disable in the setup menu when the VIDEO OUT SELECT switch on the rear panel is set to RGB position.

Caution

Once the setting for Progressive Scan output is entered, an image will only be visible on a Progressive Scan compatible TV or monitor. If you set Progressive Scan to [ON] in error, you must reset the recorder. First, remove the disc in the recorder. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor.

AV2 Connection

You can connect a decoder or other device to the EURO AV2 DECODER socket on the back.

[Decoder] Select [Decoder] if you connect the recorder’s EURO AV2 DECODER jack to a PAY-TV or Canal Plus decoder.

[Others] Select [Others] if you connect the recorder’s EURO AV2 DECODER jack to a VCR or similar recording device.

Power Save Mode

You can set up the unit into an economic power save mode. Nothing is displayed in the display window when the unit is turned off.

[OFF] Power Save Mode is not active.

[ON] Power Save Mode is active.

Notes:

The encoded television signals (CANAL+ or PREMIERE) are not decoded in the Power Save Mode.

The Power Save Mode is not available in the standby mode for the timer recording and when power off of the unit after receiving the encoded television signals (CANAL+ or PREMIERE).

18

Loading...
+ 42 hidden pages