LG MT-42PZ40V, MT-42PZ40S, MT-42PZ43S, MZ-42PZ42V, MT-42PZ43V User Manual

...
0 (0)

PLASMA MONITOR

OWNER’S MANUAL

MT-42PZ40V/B/R/S

MT-42PZ41V/B/R/S

MT-42PZ41M/B/R/S

MT-42PZ42V/B/R/S

MT-42PZ43V/B/R/S

MZ-42PZ42V/B/R/S

MZ-42PZ43V/B/R/S

Please read this manual carefully before operating your set. Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this information to your dealer when you require service.

Model number

:

Serial number

:

P/NO : 3828VA0398A (RF02RA, 092K TX, 373-026H) a

LG Plasma Monitor

What is a Plasma Display ?

If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent substance. At this moment, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon.

160° - Wide angle range of vision

A Plasma Display provides more than 160° angle range of vision so that you can get a picture without distortion from any direction.

Easy installation

A Plasma Display is much lighter and smaller than other same class products so that you can install the Plasma Display at the desired place.

Big screen

The screen of a Plasma Display is 42" so that you can get vivid experience as if you are in a theater.

Multimedia Plasma Display

A Plasma Display can be connected with a computer so that you can use it as a screen for conference, game, internet and so on.

The explanation about coloured dots may be present on PDP screen

The PDP which is the display device of this product is composed of 0.9 to 2.2 million cells and a few cell defects can occur in the manufacture of the PDP. Several coloured dots visible on the screen would be acceptable, in line with other PDP manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product which corresponds to this standard is regarded as acceptable. It means that it could not be changed or refunded.

We promise that we'll do our best to develop our technology to minimize the cell defects.

The explanation about noise of 42" PDP

In the same way that a fan is used in a PC to keep the CPU cool, the PDP is equipped with cooling fans to improve the reliability of this product. Therefore, a certain level of noise could occur when the fan is operated. This noise doesn't have any negative effect on its efficiency and liability and it's also determined to have no difficulty while using this product. The noise from the fans is normal in the operation of this product. We hope you will understand that a certain level of noise is acceptable. It means that it is not changeable nor refundable.

WARNING

MT-42PZ41/43 / MZ-42PZ43 series : This is Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING

MT-42PZ40/42 / MZ-42PZ42 series : This is Class B product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

WARNING

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

2

Contents

After reading this manual, keep it in the place where the user can always contact easily.

Safety Instructions .....................................................................................................

4

Step 1. Monitor Installation & Setup

 

Controls and Connection Options ..............................................................

6

External Equipment Connections ...............................................................

7

External Equipment Viewing Setups ..........................................................

8

Remote Control Key Functions.................................................................

11

Monitor Installation/Mounting Options ......................................................

13

Step 2. Customize your Monitor’s Features

 

Basic Features Setup and Operation

 

Turning on the Monitor .............................................................................

13

Menu Language Selection (option) ..........................................................

15

Picture Menu Options

 

PSM (Picture Status Memory)..................................................................

15

Manual Picture Control.............................................................................

15

Sound Menu Options

 

SSM (Sound Status Memory)...................................................................

16

AVL (Auto Volume Leveler) ......................................................................

16

Adjusting Sound Control...........................................................................

16

Special Menu Options

 

Menu Rotation For Vertical Viewing .........................................................

17

Orbiter.......................................................................................................

17

White Wash ..............................................................................................

17

Sleep Timer ..............................................................................................

17

Adjusting Auto Colour Control ..................................................................

18

Manual Colour Temperature Control .......................................................

18

Child Lock.................................................................................................

18

Screen Menu Options

 

Auto Adjustment .......................................................................................

19

Adjusting Horizontal/Vertical Position.......................................................

19

Picture Phase Adjustments ......................................................................

19

Initializing..................................................................................................

19

Selecting Wide VGA mode .......................................................................

20

Screen Adjustments..................................................................................

20

Luminance Noise Reduction ....................................................................

20

Setting Picture Format..............................................................................

21

Split Zoom ................................................................................................

21

Picture Size Zoom ....................................................................................

21

PIP (Picture In Picture) Feature

 

Watching PIP............................................................................................

22

Selecting a Input Signal Source for PIP...................................................

22

Using Sub picture Still Function ...............................................................

22

Moving the PIP .........................................................................................

22

Selecting PIP Sound Options ...................................................................

22

Twin Picture Setup Options

 

Watching Twin Picture ..............................................................................

23

Selecting a Input Signal Source for Twin Picture.........................................

23

Selecting Twin Picture Sound Options .....................................................

23

Using Sub picture Still Function ...............................................................

23

Step.3 Miscellaneous

 

External Control Device Setup .................................................................

24

IR Code (NEC format) ..............................................................................

29

Troubleshooting Checklist ........................................................................

31

Product Specifications ..............................................................................

35

3

Safety Instructions

-Use the Monitor at the place lower than the altitude of 6562 feet (2000m) to get the best quality of picture and sound.

WARNING

Do not place the Monitor in direct sunlight or near heat sources such as heat registers, stove and so on.

- This may cause a fire.

Do not use the Monitor in damp place such as a bathroom or any place where it is likely to get wet.

- This may cause a fire or could give an electric shock.

Bend antenna cable between inside and outside building to prevent rain from flowing in.

-This may cause water damaged inside the Monitor and could give an electric shock.

Earth wire should be connected.

-If the earth wire is not connected, there is possible a danger of electric shock caused by the current leakage.

-If grounding methods are not possible, a separate circuit breaker should be employed and installed by a qualified electrician.

Power supplier

Short-circuit

breaker

Do not use water the Monitor while cleaning.

-This may cause damaged the Monitor or could give an electric shock.

In case of smoke or strange smell from the Monitor, switch it off ,unplug it from the wall outlet and contact your dealer or service center.

- This may cause a fire or could give an electric shock.

Do not attempt to service the Monitor yourself. Contact your dealer or service center.

-This may cause damaged the Monitor or could give an electric shock.

During a lightning thunder, unplug the Monitor from the wall outlet and don’t touch an antenna cable.

-This may cause damaged the Monitor or could give an electric shock.

-Do not connect ground to telephone wires, lightning rods or gas pipe.

Do not placing anything containing liquid on top of the Monitor.

- This may cause a fire or could give an electric shock.

Do not insert any object into the exhaust vent.

- This may cause a fire or could give an electric shock.

Do not place heavy objects on the Monitor.

- This may cause serious injury to a child or adult.

WARNING in U.K. only

*This set is supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or “LG Electronics U.K. Ltd.” If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.

A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse, either in the plug, or at the distribution board.

The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

4

* Safety instructions have two kinds of information, and each meaning of it is as below.

WARNING The violation of this instruction may cause serious injuries and even death.

The violation of this instruction may cause light injuries or damage of the NOTES product.

Take care of danger that may happen under specific condition.

NOTES

Never touch the power plug with a wet hand.

- This may cause an electric shock.

Disconnect from the mains and remove all connections before moving.

Do not place the Monitor in a built-in installation such as a bookcase or rack.

- Ventilation required.

When installing the Monitor on a table, be careful not to place the edge of its stand.

-This may cause the Monitor to fall, causing serious injury to a child or adult, and serious damage to the Monitor.

Do not place an outside antenna in the vicinity of overhead power lines or other electric light or power circuits.

- This may cause an electric shock.

There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls.

- This may cause an electric shock.

Do not pull the cord but the plug when unplugging.

- This may cause a fire.

Ensure the power cord doesn’t trail across any hot objects like a heater.

- This may cause a fire or an electric shock.

Do not plug when the power cord or the plug is damaged or the connecting part of the power outlet is loose.

- This may cause a fire or an electric shock.

Dispose of used batteries carefully to protect a child from eating them.

- In case that it eats them, take it to see a doctor immediately.

When moving the Monitor assembled with speakers do not carry holding the speakers.

-This may cause the Monitor to fall, causing serious injury to a child or adult, and serious damage to the Monitor.

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

-This may cause damaged the Monitor or could give an electric shock.

Contact the service center once a year to clean the internal part of the Monitor.

- Accumulated dust can cause mechanical failure.

The distance between eyes and the screen should be about 5 ~ 7 times as long as diagonal length of the screen.

- If not, eyes will strain.

Unplug the Monitor from the wall outlet when it is left unattended and unused for long periods of time.

-Accumulated dust may cause a fire or an electric shock from deterioration or electric leakage.

Only use the specified batteries.

-This make cause damaged the Monitor or could give an electric shock.

5

LG MT-42PZ40V, MT-42PZ40S, MT-42PZ43S, MZ-42PZ42V, MT-42PZ43V User Manual

Controls of the Monitor

<Front Panel Controls>

ON/OFF

INPUT

MENU

VOL.

SELECT

Main Power Button

INPUT SELECT Button

 

D,E Buttons

 

 

 

 

Remote Control Sensor

VOLUME (F,G) Buttons

 

 

 

MENU Button

Power Standby Indicator

 

 

Illuminates red in standby mode,

 

Illuminates green when the

 

Monitor is turned on

<Back Panel>

 

 

 

 

 

 

 

 

ON/

OFF

 

Y

PB

PR

 

 

 

 

( ) R ( )

( ) L (

)

 

 

 

 

 

 

 

R AUDIO L

 

 

R AUDIO L (MONO)

 

EXTERNAL SPEAKER

RS-232C INPUT

RGB2 INPUT

RGB1 INPUT

AUDIO INPUT

RGB1 OUTPUT

REMOTE

CONTROL

AUDIO INPUT

COMPONENT(480i/480p)

S-VIDEO

INPUT

AUDIO INPUT

AC INPUT

(CONTROL/SERVICE)

(DIGITAL RGB INPUT)

(PC INPUT)

(PC OUTPUT)

CONTROL

LOCK

 

(DVD INPUT)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

COMPONENT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RS-232C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO

 

 

 

 

 

 

 

AUDIO

INPUT

 

 

RGB2 INPUT

 

 

 

 

 

 

 

 

 

RGB AUDIO

AUDIO INPUT

 

INPUT

 

 

 

 

 

 

 

INPUT

 

 

 

 

 

(DIGITAL

 

RGB1

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

RGB INPUT)

 

INPUT

 

 

 

 

COMPO-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(PC

 

 

 

 

NENT(480i/480p)

 

 

 

 

 

VIDEO INPUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT)

 

 

 

 

(DVD INPUT)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection to PC

Connection to AV equipment

Note: The connection cables shown above to the right are not included with the Monitor. A D-sub 15-pin cable and a DVI cable are provided to connect the Monitor to a PC.

6

Watching External Equipments

<Back Panel>

RCA Type

 

 

 

 

 

 

 

 

 

ON/

OFF

 

Y

PB

PR

 

 

 

 

( ) R ( )

(

) L (

)

 

 

 

 

 

 

 

R AUDIO L

 

 

R AUDIO L (MONO)

 

EXTERNAL SPEAKER

RS-232C INPUT

RGB2 INPUT

RGB1 INPUT

AUDIO INPUT

RGB1 OUTPUT

REMOTE

CONTROL

AUDIO INPUT

COMPONENT(480i/480p)

S-VIDEO

VIDEO INPUT

AUDIO INPUT

AC INPUT

(CONTROL/SERVICE)

(DIGITAL RGB INPUT)

(PC INPUT)

(PC OUTPUT)

CONTROL

LOCK

 

(DVD INPUT)

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

3

 

 

4

 

 

 

 

5

 

 

 

6

Scart Type

 

 

 

 

 

 

 

 

ON/

OFF

 

( ) R ( )

( ) L (

)

 

 

 

 

 

 

 

 

EXTERNAL SPEAKER

RS-232C INPUT

RGB2 INPUT

RGB1 INPUT

AUDIO INPUT

RGB1 OUTPUT

REMOTE

CONTROL

AC INPUT

(CONTROL/SERVICE)

(DIGITAL RGB INPUT)

(PC INPUT)

(PC OUTPUT)

CONTROL

LOCK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

AV1

1.EXTERNAL SPEAKER (8 ohm output)

Connect to optional external speaker(s).

*For further information, refer to ‘Speaker & Speaker Stand’ manual.

2.RS-232C INPUT(CONTROL/SERVICE) PORT

Connect to the RS-232C port on a PC.

3.RGB2 INPUT(DIGITAL RGB INPUT)/RGB1 INPUT(PC INPUT)/AUDIO INPUT SOCKET

Connect the monitor output socket of the PERSONAL COMPUTER to this socket.

RGB1 OUTPUT(PC OUTPUT) SOCKET

You can watch the RGB1 signal on another monitor, connect RGB1 OUTPUT (PC OUTPUT) to another monitor’s PC input port. When the monitor is in standby mode, you can not watch the RGB1 signal on another monitor.

4.CONTROL LOCK Switch REMOTE CONTROL

When “CONTROLOCK” is set “ON”, Monitor is operated by the external control device.

5.AUDIO / COMPONENT(480i/480p)(DVD INPUT) / S-VIDEO / VIDEO INPUT / AUDIO INPUT SOCKETS

EURO SCART SOCKET

Note : The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models. Contact your dealer for buying this optional item.

6.POWER CORD SOCKET

This Monitor operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the Monitor on DC power.

7

External Equipment Viewing Setups

Watching VCR (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-When connecting the Monitor to external equipment, match the colours of connecting ports (Video - yellow, Audio (L) - white,

Audio (R) -red).

-Connect the VIDEO INPUT socket (yellow) with the BNC-RCA adaptor to the VIDEO INPUT on the Monitor.

-If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.

-If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular

VCR to the Video input.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

-Use the orbiter function to Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR.

If a 4:3 picture format is used; the fixed image may remain visible on the screen.

-To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor

1.Use the INPUT SELECT button on the remote control to select Video or (AV1 or AV2). (If connected to S-VIDEO, select the S-Video external input source.)

2.Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)

Watching Cable TV (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming. This monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.

-For further information regarding cable TV service, contact your local cable TV service provider(s).

1.Use the INPUT SELECT button on the remote control and select Video or (AV1 or AV2).

2.Tune to cable service provided channels using the cable box.

Watching external AV source (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ-42PZ42/43 series models.

-When connecting the monitor to an external source, match the colours of AUDIO/VIDEO input jacks on the monitor with

the output jacks on the audio/video equipment: Video = yellow, Audio (Left) = white, Audio (Right) = red.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

1.Use the INPUT SELECT button on the remote control to select Video or (AV1 or AV2).

2.Operate the corresponding external equipment. See external equipment operating guide.

Watching DVD (When the Interface board is installed.)

The interface board(AP-42EA40/41) is not equipped on MT/MZ42PZ42/43 series models.

How to connect

Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO INPUT.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

How to use

1.Turn on the DVD player, and insert a DVD.

2.Use INPUT SELECT button on the remote control to select Component or (AV1 or AV2). Refer to the DVD player's manual for operating instructions.

Component Input ports

You can get better picture quality if you connect DVD player with component input ports as below.

Component ports of the

Y

PB

PR

Monitor

 

 

 

 

 

 

 

Video output ports

Y

Pb

Pr

Y

B-Y

R-Y

of DVD player

Y

Cb

Cr

 

Y

PB

PR

8

Connecting PC

-To enjoy vivid picture and sound, connect a PC to the Monitor.

-Avoid keeping a fixed image on the monitor’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

-Connect PC to the RGB1 INPUT(PC INPUT) or RGB2 INPUT(DIGITAL RGB INPUT) port of the Monitor; change the resolution output of PC accordingly.

-There might be a noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Then change the PC mode into other resolution or change the refresh rate into other rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card.

-The synchronization input form for Horizontal and Vertical frequencies is separate.

Setup Instructions to Connect a PC to your Monitor

-We recommend using 640x480, 60Hz for the PC mode, they provide the best picture quality.

-If the resolution of PC is over UXGA, there will be no picture on the Monitor.

-Connect the signal cable from the monitor output port of the PC to the RGB1 INPUT(PC INPUT) port of the Monitor or the signal cable from the DVI output port of the PC to the RGB2 INPUT(DIGITAL RGB INPUT) port on the Monitor.

-Connect the audio cable from the PC to the Audio input on the Monitor. (Audio cables are not included with the Monitor).

-If using a sound card, adjust PC sound as required.

-This monitor apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically to use this monitor.

-DDC protocol is preset for RGB1 (Analog RGB), RGB2 (DVI, Digital RGB) mode.

-If required, adjust the monitor settings for Plug and Play functionally.

-If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB1 INPUT

(PC INPUT) or RGB2 INPUT (DIGITAL RGB INPUT) to display the PC on the monitor.

If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB1 or RGB2;

(the other mode is set to Plug and Play automatically by the monitor.)

-DOS mode may not work depending on video card if using a DVI-I cable.

-To see a normal picture, match the VGA mode and DVI signal (640x480, 852x480, 848x480). (See page 19)

PC Setup

1.Turn on the PC and apply power to the Monitor.

2.Turn on the display by pressing the POWER button on the Monitor’s remote control.

3.Use the INPUT SELECT button on the remote control to select the RGB1 or RGB2 input source.

4.Set the resolution output of the PC to SXGA or under (1280 x 1024, 60Hz).

9

Displayable Monitor Specification

<RGB1 Mode>

Resolution

Horizontal

Vertical

DDC

Resolution

Horizontal

Vertical

DDC

Frequency(KHz)

Frequency(Hz)

Frequency(KHz)

Frequency(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

640x350

31.468

70.09

 

800x600

64.016

100.00

 

 

 

 

 

 

 

 

37.861

85.08

 

832x624

49.725

74.55

o

 

 

 

 

 

 

 

 

 

 

640x400

31.469

70.08

o

848x480

31.469

59.94

 

37.927

85.03

o

or

35.000

70.06

 

 

 

 

 

 

 

852x480

 

 

 

 

31.469

59.94

o

37.500

75.00

 

 

 

 

 

 

 

 

 

 

35.000

66.66

o

 

48.363

60.00

o

 

37.861

72.80

o

1024x768

56.476

70.06

o

 

37.500

75.00

o

60.023

75.02

o

640x480

 

43.269

85.00

 

 

68.677

84.99

 

 

 

 

 

 

45.913

90.03

 

 

54.348

60.05

o

 

53.011

100.04

 

1152x864

63.995

70.01

o

 

64.062

120.00

 

67.500

75.00

o

 

 

 

 

 

 

 

 

 

 

 

 

35.156

56.25

o

 

77.487

85.05

 

 

 

 

 

 

 

 

 

 

37.879

60.31

o

1152x870

68.681

75.06

o

 

 

 

 

 

 

 

 

800x600

48.077

72.18

o

1280x960

60.000

60.000

o

46.875

75.00

o

75.000

75.00

o

 

 

 

 

 

 

 

 

 

 

 

53.674

85.06

 

1280x1024

63.981

60.02

o

 

56.000

90.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

<RGB2 Mode>

Resolution

Horizontal

Vertical

DDC

Resolution

Horizontal

Vertical

DDC

Frequency(KHz)

Frequency(Hz)

Frequency(KHz)

Frequency(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

640x350

31.468

70.09

 

800x600

64.016

100.00

 

 

 

 

 

 

 

 

37.861

85.08

 

832x624

49.725

74.55

o

 

 

 

 

 

 

 

 

 

 

640x400

31.469

70.08

o

848x480

31.469

59.94

 

37.927

85.03

o

or

35.000

70.06

 

 

 

 

 

 

 

852x480

 

 

 

 

31.469

59.94

o

37.500

75.00

 

 

 

 

 

 

 

 

 

 

35.000

66.66

 

 

48.363

60.00

o

 

37.861

72.80

 

1024x768

56.476

70.06

 

 

37.500

75.00

 

60.023

75.02

 

640x480

 

 

 

43.269

85.00

 

 

68.677

84.99

 

 

 

 

 

 

 

 

 

 

 

 

 

 

45.913

90.03

 

 

54.348

60.05

o

 

53.011

100.04

 

1152x864

63.995

70.01

 

 

64.062

120.00

 

67.500

75.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35.156

56.25

 

 

77.487

85.05

 

 

 

 

 

 

 

 

 

 

37.879

60.31

o

1152x870

68.681

75.06

o

 

 

 

 

 

 

 

 

800x600

48.077

72.18

 

1280x960

60.000

60.000

o

46.875

75.00

 

75.000

75.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

53.674

85.06

 

1280x1024

63.981

60.02

o

 

56.000

90.00

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

Remote Control Key Functions

-When using the remote control aim it at the remote control sensor of the Monitor.

-There's maybe a defect in consecutive operation of remote control in specified brightness according to this monitor feature.

POWER

 

 

 

 

 

 

 

Switches the Monitor on from stand-

 

 

 

 

 

 

 

by or off to standby.

 

 

 

 

 

 

INPUT SELECT

 

 

 

 

 

 

 

SLEEP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sets the sleep timer.

 

POWER

 

 

 

 

 

 

 

 

 

 

 

SSM

 

 

SLEEP

 

INPUT SELECT

 

 

 

To select the sound appropriate to

 

 

 

 

 

 

 

PSM

 

PSM

 

SSM

 

your viewing program character:

Adjusts the factory preset picture

 

 

 

 

 

 

Flat, Speech, Movie, Music, or User

 

ARC

 

AUTO CONFIG.

according to the room.

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM -

 

ZOOM +

 

ARC

 

 

 

 

 

 

AUTO CONFIG.

 

SPLIT ZOOM

 

CHILD LOCK

Changes the picture format.

 

 

 

 

 

 

 

 

MENU

 

MUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZOOM-

 

ZOOM+

Reduces the main picture size.

 

OK

Enlarges the main picture size.

 

VOL

VOL

 

SPLIT ZOOM

 

CHILD LOCK

Enlarge the screen with regular

 

To operate the monitor with remote

 

 

control only.

MENU

 

 

 

MUTE

 

 

 

Switches the sound on or off.

Displays on screen menus one by one.

1

2

3

 

Exits the current menu.

4

5

6

OK

Memorizes menu changes.

 

 

 

 

7

8

9

 

NUMBER buttons

 

0

 

D / E

 

 

 

Selects a menu option.

 

 

 

 

PIP

 

 

 

F / G (Volume button)

 

 

 

Increases/decreases sound level.

Switches the sub picture on

 

 

 

 

POWER

STOP

P/STILL

Adjusts menu settings.

 

 

 

 

TWIN PICTURE

REW

PLAY

FF

 

 

 

PIP INPUT

 

 

REC

VCR BUTTONS

Selects the input mode for the

 

 

 

 

 

 

Controls a LG video cassette

sub picture.

PIP

TWIN PICTURE PIP INPUT

 

 

 

recorder.

 

SOUND SELECT PIP POSITION

 

SOUND SELECT

PIP STILL

 

 

 

 

 

Select main picture sound or

 

 

 

 

sub picture sound for PIP.

 

 

 

 

PIP POSITION change the sub picture position.

PIP STILL

Freeze sub picture motion.

Installing Batteries

• Open the battery compartment cover on the back side and insert the batteries with correct polarity.

• Install two 1.5V alkaline batteries of AAA type. Don’t mix used batteries with new batteries.

11

Loading...
+ 25 hidden pages