LG M4214CCBA, M4214C User Manual

0 (0)

ENGLISH

OWNER’S MANUAL

MONITOR SIGNAGE

Please read this manual carefully before operating your set and retain it for future reference.

MONITOR SIGNAGE MODELS

M4214C

www.lg.com

Table of Contents

 

Accessories

3

Connecting the Stand

4

Connecting the Speakers

5

Portrait Mode

6

Using the Remote Control

7

Part Names and Functions

9

Connecting to External Devices

10

Connecting to Your PC.......................................................................................................

10

Using the LAN......................................................................................................................

12

Daisy Chaining Set..............................................................................................................

13

VESA FDMI Wall Mounting.................................................................................................

14

Cable Management..............................................................................................................

15

Video Input............................................................................................................................

16

Component Input (480i/480p/576i/576p/720p/1080i/1080p)...........................................

17

HDMI Input (480p/576p/720p/1080i/1080p).......................................................................

18

User Menus

19

Screen Adjustment Options...............................................................................................

19

OSD Menu ............................................................................................................................

21

Adjusting the OSD (On-Screen Display) .........................................................................

22

Adjusting the Screen Automatically.................................................................................

22

Adjusting Screen Color.......................................................................................................

23

Adjusting Audio...................................................................................................................

29

Adjusting the Timer.............................................................................................................

30

Selecting Options ...............................................................................................................

31

Screen Tiling Options..........................................................................................................

33

USB Options.........................................................................................................................

35

Troubleshooting

49

Specifications

52

Controlling Multiple Set

A1

2

Accessories

Included Accessories

Thank you for your purchase. Check to make sure that the accessories shown immediately below have been included with your set.

Note that the accessories may look different from those shown here.

Remote Control

D-Sub Signal

Power Cable

Audio Cable (PC)

CD-ROM / Cards

/ Batteries

Cable

 

 

 

 

 

 

 

 

Separately Purchased Accessories

Optional accessories are subject to change without prior notice to improve the performance of the set. New optional accessories may be added periodically.

Optional accessories (purchased separately) may vary depending on the model.

Note that optional accessories may look different from those shown here.

Speaker Kit

Applicable only for models that support the speakers.

Cable holder/Cable tie

 

 

They may not

 

 

be available

 

 

in some areas

 

 

or for some

Speaker(2)

Screws (4)

models.

 

 

/ Cable (2)

 

NC2000 Kit

Applicable only for models that support the NC2000.

Stand Kit

Applicable only for models that support stand.

Stand (1)

Screws (6)

Cable management (1)

NC2000

CD-ROM /

Screws (2)

 

Cards

 

 

 

 

3

Connecting the Stand

- Only on some models.

1. Take the parts for the stand out of the box and assemble them as shown in the picture.

Parts

First, check if the following parts are all present.

Screws (6)

Stand (1)

Cable management (1)

2. Place a soft cloth on a table and place the set screen side down upon the table. Connect the stand as shown below.

3. Use the screws to secure the stand on the rear side of the set as shown below.

4

LG M4214CCBA, M4214C User Manual

Connecting the Speakers

- Only on some models.

Attach the speakers to the set using screws as shown below. Then, connect the speaker cable.

After installing your speakers, use holders and cable ties to organize the speaker cables.

Cable holder

Remove the paper.

* This feature is not available on all models.

Cable ties

When the speakers are installed.

 

*Connect the input terminal with the

* This feature is not available on all models.

proper color match.

 

5

Portrait Mode

- Only on some models.

"When installing in portrait mode, rotate the set clockwise."

6

Using the Remote Control

Remote Control Buttons

1

2

MONITOR ENERGY INPUT

 

ON

OFF

 

 

 

 

SAVING

 

 

. , !

ABC

DFG

 

3

GHI

JKL

MNO

 

 

PQRS

TUV

WXYZ

 

4

1/a/A

- * #

CLEAR

 

5

 

MARK

 

 

 

ARC

 

 

6

 

 

BRIGHT

P

 

PSM

A

 

NESS

G

7

 

 

 

E

 

MUTE

 

 

 

 

 

 

8

MENU

AUTO

S.MENU

 

 

 

 

 

9

 

OK

 

 

10

 

 

 

 

11

BACK

TILE

EXIT

 

 

 

 

ID

 

 

 

12

ON

OFF

 

 

 

 

 

 

13

1POWER On / Off Button

-Switches the set on from standby or off to standby.

2MONITOR On / Off Button

-Turns off the monitor and then turn it back on.

3Number and Letter Buttons

-Type numbers and letters.

41/a/A Button

-Selects numbers and letters. (SuperSign input only).

5Volume Up/Down Button

-Adjusts the volume.

6PSM Button

-Selects the Picture Status mode.

7MUTE Button

-Switches the sound on or off.

8MENU Button

-Selects a menu.

-Clears all on-screen displays and returns to monitor viewing from any menu.

9Up/Down/Left/Right Buttons

-Allows you to navigate the on-screen menus and adjust the system settings to your preference.

10OK Button

-Accepts your selection or displays the current mode.

11BACK Button

-Allows the user to move return one step in an interactive application.

12ID ON/OFF Button

-Enables set lock.

13USB Menu Control Buttons

-Adjusts the USB menu (Photo List, Music List and Movie List).

7

Using the Remote Control

 

 

 

 

 

14

MONITOR

ENERGY INPUT

 

15

ON

OFF

 

 

 

 

SAVING

 

 

. , !

 

ABC

DFG

 

 

GHI

 

JKL

MNO

 

 

PQRS

 

TUV

WXYZ

 

16

1/a/A

- * #

CLEAR

 

 

17

 

 

MARK

 

 

 

 

ARC

 

 

18

 

 

PSM

BRIGHT

P

 

 

A

 

 

 

 

NESS

G

 

 

 

 

 

E

 

 

 

MUTE

 

 

 

MENU

 

AUTO

S.MENU

 

19

 

 

20

 

 

 

 

 

OK

BACK

TILE EXIT

21

22

ID

 

 

 

ON

OFF

 

14ENERGY SAVING Button

- Adjusts the Energy Saving mode of the set.

15INPUT Select Button

Accesses the Input Signal Window.

Selects the signal type you want using ◄ ►.

Input List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

16CLEAR Button

-Deletes the numbers and letters you typed (SuperSign input only).

17ARC Button

-Selects the Aspect Ratio mode.

18BRIGHTNESS Button

-Adjusts the resolution and brightness by pressing Up and Down.

-In USB mode, the OSD menu has the Page function to move to the next file list.

19AUTO Button

-Automatically adjusts picture position and minimizes image instability (RGB input only).

20S.MENU Button (SuperSign Menu Key)

-Selects the SuperSign OSD Menu (SuperSign input only).

21EXIT Button

-Clears all on-screen displays and returns to set normal viewing from any menu.

22TILE Button

-Selects the TILE mode.

Inserting Batteries into the Remote Control

1.Slide off the battery cover.

2.Insert the batteries with correct polarity ( + / - ).

3. Close the battery cover.

4. To remove the batteries, perform the installation actions in reverse.

• Dispose of used batteries accordance with local regulations to prevent environmental pollution.

8

Part Names and Functions

* The set image in the user's guide may be different from the actual image.

Rear View

1

2

3

4

5

6

7

8

1Power Connector

Connect the power cord.

2RS-232C Serial Ports

3RGB, HDMI/DVI Ports

HDMI supports high definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals.

4PC Sound Jack

Connect the audio cable to the LINE OUT* jack of the PC sound card.

5AV Ports

6USB Port

7LAN Port

8Speaker Ports

*LINE OUT

A terminal that is used to connect to the speaker including a built-in amplifier (amp).

Check the connecting terminal of the PC sound card before connecting. If the Audio Out of the PC sound card only has a Speaker Out jack, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (refer to your sound card's manual).

9

Connecting to External Devices

Connecting to Your PC

1Check that the computer, monitor and the peripherals are turned off. Then, connect the signal input cable.

A.Connecting with a D-Sub Signal Input Cable.

B.Connecting with an HDMI-DVI Signal Input Cable (not included)

*When HDMI PC is used, a compatibility problem may occur.

A.

PC

 

Rear back of the set.

 

MAC

PC/MAC

 

Macintosh Adapter (not included)

Use the standard Macintosh adapter since an incompatible adapter

that uses a different signaling system is available on the market.

B.

 

(not included)

Rear back of the set.

PC

 

*Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance with your set.

2

Connect the Audio cable.

 

 

Rear back of the set.

PC

 

 

3

Connect the power cord.

 

Rear back of the set.

10

Connecting to External Devices

4 1. Press Power.

Power button

2. Turn on the PC.

5Select an input signal.

Press INPUT on the remote control to select the input signal.

INPUT → ◄ ► → OK

Or, press SOURCE on the bottom of the set.

SOURCE →◄ ► → AUTO/SET

A. Connecting with a D-Sub Signal Input Cable.

Select RGB: 15-pin D-Sub analog signal.

 

 

Input List

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

 

B.

 

 

 

Connecting with an HDMI to DVI Signal Input Cable.

 

Select HDMI/DVI: DVI Digital signal or HDMI Digital signal.

 

 

 

 

 

 

 

 

 

 

Input List

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

 

 

 

 

 

 

 

Note

 

• Connecting two computers.

 

 

 

 

Connect the signal cables (HDMI-DVI and D-Sub) to each computer.

 

 

 

 

Press INPUT on the remote control to select the computer to use.

Connect to a grounded power outlet directly on the wall or on a grounded power strip.

11

Connecting to External Devices

Using the LAN

1 Connect the LAN cable as shown below.

A. Connect PC to Monitor.

B. Using a Router (Switch).

LAN

LAN

Switch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set

 

 

 

 

 

 

 

PC

 

Set

PC

 

 

 

 

 

 

 

 

 

 

 

 

C. Using the Internet.

LAN

Network

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set

 

 

 

 

 

 

PC

 

 

2Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM.

For more information about the program, please refer to the eZ-Net Guide on the included CD-ROM.

Note

• Using a LAN establishes communication between your PC and the set and enables

 

 

use of the OSD menus on the PC as well as the set.

 

 

 

 

12

Connecting to External Devices

Daisy Chaining Set

A. Using RGB Input

To use different set connected to each other, connect one end of the signal input cable (15-pin D-Sub signal cable) to the RGB OUT connector of set 1 and connect the other end to the RGB IN connector of other set.

15-pin D-Sub Signal Cable

PC

PC

Set 1

B. Using AV Input

Audio Cable

(not included)

Video/TV

BNC Cable (not included)

Set 1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set 2

Set 3

 

 

Set 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set 2

Set 3

Note

 

• The number of set that can be connected to one output may vary depending on signal

 

 

status and cable loss. If the signal status is good, and there is no cable loss, it is pos-

 

 

sible to connect up to 9 set. If you want to connect more than nine, a distributor is

 

 

recommended.

 

 

 

13

Connecting to External Devices

VESA FDMI Wall Mounting

This set supports a VESA FDMI compliant mounting interface. These mounts are purchased separately and are not available from LG. Refer to the instructions included with your wall mount for more info.

Kensington Security Slot

The set is equipped with a Kensington Security System connector on the back panel. The cable and lock are available separately and are not sold by LG. For more info, visit http://www.kensington. com.

Note

• There is a switch on the lower side of the back. You can set the switch to "On"

 

before connecting a power cord to make it more convenient.

 

 

 

 

14

Connecting to External Devices

Cable Management

-Only on some models.

1.Arrange the cables in the center as shown in the following picture.

2. Fit the cable guide to the back to help manage the cables.

Removing the cable guide.

Cable

Management

Hold the Cable management with both hands and pull it downward.

Note

• Do not use the cable management as a handle for the Monitor.

 

15

Connecting to External Devices

Video Input

1Connect the video cable as shown below and then connect the power cord (see page 10).

Connecting with a BNC Cable

• Connect the input terminal with a proper color match.

Set

BNC Cable

 

 

 

Audio Cable

 

 

 

 

(not included)

 

(not included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR/DVD Receiver

2Select an input signal.

Press INPUT on the remote control to select the input signal.

INPUT → ◄ ► → OK

Or, press SOURCE on the bottom of the set.

SOURCE →◄ ► → AUTO/SET

Connecting with a BNC Cable

Select AV.

Input List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

16

Connecting to External Devices

Component Input (480i/480p/576i/576p/720p/1080i/1080p)

1Connect the AV cable as shown in the below figure, then connect the power cord (see page 10).

Connect the input terminal with the matching color.

Set

 

 

 

 

 

 

 

 

 

 

BNC Cable

 

 

 

Audio Cable

 

 

 

(not included)

 

 

 

(not included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HDTV Receiver

Note:

-Some devices may require HDCP in order to display HD signals.

-Component doesn't support HDCP.

2Select an input signal.

Press INPUT on the remote control to select the input signal.

INPUT → ◄ ► → OK

Or, press SOURCE on the bottom of the set.

SOURCE →◄ ► → AUTO/SET

Select Component.

Input List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

 

 

 

 

 

 

 

 

17

Connecting to External Devices

HDMI Input (480p/576p/720p/1080i/1080p)

HDMI supports high definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals.

1 Connect the AV cable as shown below and connect the power cord (see page 10).

Set

Set

 

 

 

 

 

 

 

RCA-PC

 

 

 

 

 

 

 

 

 

HDMI-DVI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Cable

 

 

 

Audio Cable

 

 

 

 

 

 

 

HDMI Signal Cable

(not included)

 

 

 

(not included)

 

 

 

 

 

 

 

(not included)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VCR/DVD/Set-top Box

VCR/DVD/Set-top Box

Note: Dolby Digital is not supported.

2Select an input signal.

Press INPUT on the remote control to select the input signal.

INPUT → ◄ ► → OK

Or, press SOURCE on the bottom of the set.

SOURCE →◄ ► → AUTO/SET

Connecting with an HDMI-DVI Signal Input Cable or an HDMI Signal Input Cable.

Select HDMI/DVI.

Input List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

 

 

 

 

 

 

 

 

18

User Menus

Screen Adjustment Options

7

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

3

4

5

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

 

Power Button

Turns the set on/off.

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Power Indicator

This Indicator lights up green when the set is operating

normally (on mode). If the set is in sleep mode (Energy

 

 

 

 

 

 

 

 

 

 

Saving), the indicator color changes to amber.

 

 

 

 

 

 

 

 

 

3

 

 

MENU Button

Shows/hides the OSD (On-Screen Display) menu.

 

 

 

 

 

 

 

 

 

4

 

 

OSD Select /

Selects an icon or adjusts the setting in the OSD menu.

 

 

Adjust Button

 

 

 

 

 

 

 

 

 

▲ ▼ Adjusts up and down.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

◄ ► Adjusts the volume.

 

 

 

 

 

 

 

 

 

 

Volume

35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

User Menus

Screen Adjustment Options

5

AUTO/SET Button

[For PC Analog signal]

Auto in progress

For optimal display change resolution to 1920 x 1080

[When XGA Mode is active and 1920 x 1080 is selected]

Auto in progress

6

SOURCE Button

 

 

SOURCE → ◄

► → AUTO/SET

- Toggles between inputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Composite Video

 

 

 

 

 

 

 

 

 

Component

HDTV, DVD

 

 

 

 

 

 

 

 

 

RGB

15-pin D-Sub analog signal

 

 

HDMI/DVI

Digital signal

 

 

 

 

 

 

 

 

 

SuperSign

SupeSign

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Input List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV

Component

RGB

HDMI/DVI

SuperSign

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

IR Receiver

The sensor from which the set receives signals from the

remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

 

 

 

 

 

User Menus

 

 

 

OSD Menu

 

 

 

 

 

Icon

Function Description

 

 

 

 

 

 

 

 

 

 

 

 

Adjusts screen brightness, contrast and color to your preference.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Picture

 

 

Adjusts the audio.

Audio

Adjusts the timer.

Time

Adjusts the screen status according to conditions.

Option

Adjusts tile options.

Tile

Adjusts USB options.

USB

Note

 

OSD (On-Screen Display)

 

 

• The OSD function enables you to adjust the screen status conveniently since it

 

 

 

 

provides graphical menu representation.

 

 

 

21

User Menus

Adjusting the OSD (On-Screen Display)

MENU

Pops up

Move where

Select a

Move where

Select a

Adjust the status

Save

Exit from the

the menu

you want to

menu icon

you want to

menu list

adjustment

menu screen.

 

screen

adjust

 

adjust

 

 

 

 

Use the remote control to adjust the OSD.

1Press MENU to bring up the OSD.

2To access a control, use ▲▼.

3When the icon you want becomes highlighted, press OK.

4To access a control, use ▲▼.

5When the list you want becomes highlighted, press OK.

6Use ▲▼◄ ► to adjust the item to the desired level.

7Accept the changes by pressing OK.

8Exit the OSD by pressing EXIT.

Adjusting the Screen Automatically

Press AUTO/SET (AUTO on the remote Control) when viewing a PC analog signal. The optimal screen settings will be selected that suit the current mode. If adjustments are not satisfactory, adjust the screen manually.

[When XGA Mode is active and 1920 x 1080 is selected]

Auto in progress

22

User Menus

Adjusting Screen Color

Aspect Ratio

 

 

 

PICTURE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Move

OK

 

 

 

 

 

 

 

 

 

 

16:916:9

 

 

 

 

 

Aspect Ratio

: 16:9

 

 

Just scan

 

 

 

 

Aspect Ratio

: 16:9

 

 

 

 

 

 

 

Energy Saving

: Off

 

 

 

 

 

 

 

 

 

 

Original

 

 

 

 

 

Picture Mode

: Standard

 

 

4:3

 

 

 

 

 

 

 

• Backlight

70

 

14:9

 

 

 

 

 

 

 

• Contrast

90

 

Zoom

 

 

 

 

 

 

 

 

• Brightness

50

Cinena Zoom 1

 

• Sharpness

70

 

Full

Wide

 

 

 

 

 

• Color

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To select the image size of the screen.

16:9: Widescreen mode.

Just Scan: Displays the full signal data without cropping any of the image.

(* This menu is only active in 720p and 1080i in component mode.)

Original: The aspect ratio is not adjusted from the original signal and is set by the program being watched.

4:3: Selects a 4:3 aspect ratio image.

1:1: The aspect ratio is not adjusted from the original. Used in PC mode (only HDMI/ DVI PC, RGB PC). 14:9: 14:9 programs are viewed normally in 14:9 with black bars added to the top and bottom.

4:3 programs are magnified on the top/bottom and left/right sides.

Zoom: 4:3 programs are magnified until they fill the 16:9 screen. The top and bottom will be cut off. Cinena Zoom 1: Choose Cinema Zoom when you wish the picture to be altered, both horizontally

extended and vertically cropped. This is a good compromise between signal alteration and screen coverage.

Full Wide: When the set receives a wide screen signal, it causes you to adjust the picture horizontally or vertically, in linear proportion, to fill the entire screen.

ARC

MODE

AV Component

RGB

HDMI / DVI

SuperSign

 

 

 

16 : 9

Just Scan

Original

4 : 3

1 : 1

14 : 9

Zoom

Cinema Zoom 1

Full Wide

23

User Menus

Adjusting Screen Color

Energy Saving

PICTURE

Move OK

 

 

 

Aspect Ratio

: 16:9

 

 

 

 

 

 

 

 

 

 

 

OffOff

 

 

 

 

 

 

Energy Saving

: Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Picture Mode

: Standard

 

 

Level

1

 

 

 

 

 

 

Level

2

 

 

 

 

 

 

• Backlight

70

 

 

 

 

 

 

 

• Contrast

90

 

Level

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Brightness

50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Sharpness

70

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Color

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The screen brightness adjusting menu helps you save energy.

Level: 4 screen brightness levels are available.

-Off: 100% light

-Level 1: 80% light

-Level 2: 60% light

-Level 3: 40% light

24

User Menus

Adjusting Screen Color

Picture Mode

 

 

 

PICTURE

Move

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect Ratio

: 16:9

 

 

 

 

 

 

 

 

 

 

 

 

Energy Saving

: Off

 

 

 

 

 

 

 

 

Picture Mode

: Standard

 

Vivid

 

Picture Mode

: Standard

 

Standard

 

 

• Backlight

70

tandard

 

 

Cinema

 

• Contrast

90

 

 

Sport

 

 

• Brightness

50

 

 

Game

 

 

• Sharpness

70

 

 

Expert 1

 

 

• Color

60

 

 

Expert 2

 

 

 

 

 

 

 

 

The picture mode menu toggles between screen presets.

Standard: This is the optimum viewing condition for general users. Vivid: Displays a sharp image.

Cinema: This mode optimizes video for watching movies.

Sport: This mode emphasizes dynamic video and primary colors (e.g. white, uniforms, grass, sky blue, etc.) by realizing the optimal image settings for sports.

Game: This is the mode for fast response speeds for video games. Expert1,2 : Select this option to use the user-defined settings.

Note

• If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,

 

Sport or Game, the subsequent menus will be automatically set.

 

 

 

 

25

User Menus

Adjusting Screen Color

Picture Mode

 

 

 

PICTURE

 

 

 

Move

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Aspect Ratio

: 16:9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Energy Saving

: Off

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Picture Mode

: Standard (User)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Backlight

 

7070

 

 

 

 

 

 

 

 

• Contrast

 

90

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Brightness

50

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Sharpness

70

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Color

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Backlight: Adjusts the brightness of LCD panel.

Contrast: Adjusts the difference between light and dark levels. Brightness: Adjusts the brightness of the screen.

Sharpness: Adjusts the clearness of the screen (function works in DTV mode). Color: Adjusts the color (works in DTV mode).

Tint: Adjusts the tint (function works in DTV mode).

26

User Menus

Adjusting Screen Color

Advanced Control

 

 

 

PICTURE

Move

OK

 

 

 

 

• Contrast

90

Color Temperature

◄ Medium ►

• Brightness

50

Dynamic Contrast

 

• Sharpness

70

High

 

 

• Color

60

Dynamic Color

High

• Tint

0

Noise Reduction

Medium

 

•Advanced Control

 

 

 

Gamma

Medium

 

• Picture Reset

 

Black Level

 

Screen

 

High

 

 

 

 

 

Film Mode

Off

 

 

 

 

Close

Color Temperature: Color Settings

Cool: Slightly purple temperature. Medium: Slightly blue temperature. Warm: Slightly red temperature.

Dynamic Contrast: Optimizes the contrast automatically according to the brightness of the reflection.

Dynamic Color: Adjusts the color of the reflection automatically to reproduce natural colors as closely as possible.

Noise Reduction: Removes noise up to the point where it does not damage the original picture.

Gamma: Sets your own gamma value.

On the set, high gamma values display whitish images and low gamma values display high contrast images.

Black Level: Adjusts the contrast and the brightness using the black level of the screen (function works in the following modes: AV, Component, HDMI-DTV).

Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter.

Film Mode: When you watch a movie, this function adjusts the set to the best picture appearance (function works in the following modes: AV, Component 480i/576i/1080i, HDMI/DTV 480i/576i/1080i).

White Balance: Adjusts the overall color of the screen to your preferences (function works in the following modes - Expert 1, Expert 2 Picture mode).

Color Management System: This is an expert tool used to make adjustments by using test patterns. This does not affect other colors but can be used to selectively adjust the 6 color areas (red/green/blue/cyan/ magenta/yellow). Color differences may not be distinct even when you make general adjustments for video (function works in the following modes: Expert 1, Expert 2 Picture mode).

27

Loading...
+ 62 hidden pages