LG D2524W, DLE2514W, DLE2512W, D2522W User Manual

0 (0)

DLE2514W/DLG2524W DLE2512W/DLG2522W

DLE2512W/DLG2522W

DLE2514W/DLG2524W

P/No.: 3828EL3004B

PRODUCT FEATURES

1

2

3

4

5

OUTSTANDING PERFORMANCE

Not to mention unmatched big capacity, you can benefit from good time efficiency, quiet operation and energy saving system.

DOUBLE-COATED STEEL DRUM

It is coated with one metal coating and the other polymer coating in order to guarantee high durability and the long life.

ARTISTIC DESIGN

Modern front panel look and big crystal-clear glass door make your house look stylish.

DIGITAL FABRIC CARE

Multi-level temperature control heater takes a better care on your valued clothes.

EASY OF USE

A whole selection of user-friendly functions always make you comfortable with dryer operation.

TABLE OF CONTENTS

 

PART1. SPECIFICATIONS .....................................................................................................................................

3

PART2. IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS .................................................................

4-6

PART3. INITIAL STEPS FOR INSTALLING YOUR DRYER .............................................................................

7-12

PART4. ACCESSORIES INSTALLATION .......................................................................................................

13-14

PART5. ELECTRICAL REQUIREMENTS FOR ELECTRIC DRYER ...............................................................

15-18

PART6. ELECTRICAL REQUIREMENTS FOR GAS DRYERS ............................................................................

19

PART7. GAS REQUIREMENTS AND INSTRUCTIONS........................................................................................

20

PART8. EXHAUST REQUIREMENTS AND MAINTENANCE..........................................................................

21-22

PART9. OPERATING YOUR DRYER...............................................................................................................

23-28

PART10. TROUBLESHOOTING GUIDE ..........................................................................................................

29-31

LG DRYER LIMITED WARRANTY ........................................................................................................................

32

2

Part 1 SPECIFICATIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

■ Name

: Electric and Gas Dryer

■ Power supply

: Please refer to the rating label regarding detailed

 

 

 

information.

■ Size

: 68.6 X 96.5 X 73.0 (cm)

■ Dryer capacity

: IEC 7.0 cu.ft.

■ Weight

: 126(Ibs)

Specifications are subject to change by manufacturer.

■ ACCESSORIES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dryer rack (1 each)

 

 

 

 

 

 

Stacking kit (1 each)

 

 

 

 

 

Pedestal (1 each)

 

 

 

 

 

 

 

 

 

 

Purchased Separately

 

 

 

 

 

Purchased Separately

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

See page 26 for how to use.

 

 

 

 

See page 13 for how to use.

 

See page 14 for how to use.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS

SEEKING WARRANTY ASSISTANCE

Warranty Service. The warranty for your dryer is printed the end of this manual. Warranty service is available by contacting your nearest LG Service Center and, for warranty period from the date of purchase, if this dryer is installed and operated according to the instructions in this manual, LG will repair or replace any of its mechanical or electrical parts if they are defective in material or workmanship.

!WARNING!

For your safety, the recommendations in this manual must be followed. To reduce the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death when using your appliance, follow basic precautions, including the following.

Warranty Restriction: If the dryer is subjected to other than private family use, all warranty coverage is effective for only 90 days.

You will need the complete model and serial numbers when requesting information. We recommend that you staple your sales slip or cancelled check here, because proof of original purchase date is needed to obtain warranty service. Your dryer’s model and serial numbers are located on the Model and Serial Number Plate located on the front of the dryer behind the door.

Use the space below to record the model number and serial number of your new LG dryer.

Model No.

Serial No.

Date of Purchase

Staple your receipt hear.

4

Part 2 IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

!WARNING!

to help reduce any risk of electric shock, fire, or other personal or property injury when using your dryer, please exercise care and follow basic safety precautions, including the following:

SAVE THESE INSTRUCTIONS

codes and ordinances.

WARNING - Improper connection of the equipmentgrounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the appliance is properly grounded.

5

IMPORTANT WARRANTY AND SAFETY INSTRUCTIONS

!WHAT TO DO IF YOU SMELL GAS:

Do not try to light a match or cigarette, or turn on any gas or electrical appliance.

Do not touch any electrical switches. Do not use any phone in your building.

Clear the room, building or area of all occupants.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions carefully.

If you cannot reach your gas supplier, call the fire department.

!WARNING

To reduce the risk of fire or explosion, electric shock, property damage, personal injury or death when using this appliance, please follow all instructions and information, including those in this manual and instructions and information provided by your gas supplier, including the following:

Do not store or use any gasoline, dry-cleaning solvents any other flammable vapors or liquids in the area surrounding this appliance.

Do not dry anything that has ever had anything flammable on it, even after washing.

No washer can completely remove oil. Do not dry any articles that have ever had any kind of oil on them, including cooking oil.

Articles containing foam, rubber, rubber-like materials, plastic or similar materials should be dried on a clothesline or by using an air cycle.

Failure to follow these instructions can result in fire, death or serious injury.

A qualified service person or company must perform installation and service of this appliance.

!WARNING!

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches above the floor for a garage installation.

Failure to do so can result in death, explosion or fire.

California safe drinking water and toxic enforcement act

This act requires the governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm and requires businesses to warn customers of potential exposure to such substances.

Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon monoxide, formaldehyde and soot, caused primarily by the incomplete combustion of natural gas or LP fuels.

Properly adjusted dryers will minimize combustion. Exposure to these substances can be minimized further by properly venting the dryer to the outdoors.

6

Part 3 INITIAL STEPS FOR INSTALLING YOUR DRYER

through the initial steps of setting up your dryer for use. provides important information regarding the preparation and review this entire manual before proceeding with any

concerning electrical connections, gas connections, and of this manual.

STEP 1 Positioning the Dryer.

Choose a location with a solid floor for your dryer. Place the dryer at least eighteen inches above the floor for a garage installation. After placing the dryer in the desired location, please confirm that the dryer has the required clearances through reference to the following information and manual sections on Exhaust Requirements and Maintenance.

If you are installing your dryer in a manufactured or mobile home, please refer to STEP 9 below for additional instructions.

48.4” (123 cm)

38.7” (98.3 cm)

27”

29.6”

(68.6 cm)

(75.3 cm)

Certain minimum clearance are required above,behind, and to the sides of the dryer in the ever you install it any closer of other recessed area. Those required minimum clearances are set forth in the picture below. Please also keep the following instructions in mind when installing in a closet or recessed area:

Consider allowing additional clearance for installation and servicing.

Wall,door and flow molding may require additional clearance.

Additional space of 1inch (2.5cm) is recommended an all sides in order to reduce noise transfer.

Consider space needed for companion appliances.

For closer installation, the picture below shows the minimum required ventilation openings for the door. A louvered door with comparable ventilation openings are also acceptable.

ventilation

hole

ventilation

hole

<Closet door>

<Closet-Side view>

* Most installations require a minimum 5 1/2 in.

(14 cm) clearance behind the dryer for the exhaust vent with elbow.

0"

 

 

27"

 

 

 

0"

 

 

 

 

(0 cm)

(68.6 cm)

 

(0 cm)

<Closet-Front view>

7

LG D2524W, DLE2514W, DLE2512W, D2522W User Manual

Part 3 INITIAL STEPS FOR INSTALLING YOUR DRYER

Once in position, adjust the leveling legs of the dryer until it is level from left to right and from front to back. The leveling legs must remain firmly on the floor and the dryer should not rock. The maximum slope of the dryer from left to right or from front to back should not exceed 2.5 cm (1 inch). If the dryer

STEP 2 Procedure for Reversing the Door

The door on your dryer can be installed to open either to the left or the right. Follow these procedures to reverse the direction in which your door opens:

1

2

3

INSTALLING YOUR DRYER

STEP 3 Connecting the Exhaust

and Venting System.

In addition to the following warnings, please refer to manual section on Exhaust Requirements and Maintenance. IMPORTANT: To reduce the risk of fire, combustion, and gas accumulation, the dryer must be vented to the outdoors. Please follow the instructions (and all others in this manual) very carefully.

Do not use thin plastic or foil ducting.

Use 4" (10.2 cm) diameter rigid or flexible metal duct (note: venting materials are not supplied with the dryer, and you should obtain the venting materials necessary for proper installation)

Position the dryer where the exhaust duct is shorter as possible

Clean old ducts before installing this dryer

The male end of each section of exhaust duct must point away from the dryer

Use fewer elbow joints as possible

Use duct tape on all duct joints

Insulate ductwork that runs through unheated areas in order to reduce condensation and lint build-up on pipe walls; and

PLEASE BE AWARE THAT FAILURE TO EXHAUST THE DRYER CORRECTLY WILL VOID THE DRYER’S WARRANTY.

!WARNING!

Use a heavy metal vent.

Do not use a plastic vent.

Do not use a metal foil vent.

Failure to follow these instructions can result in death or fire.

Clean old ducts before installing this dryer

ALTERNATE EXHAUST DIRECTIONS

1.Remove a screw and exhaust duct.

2-1. Detach and remove a knockout at the button, left or right side as desired. (Right Side Vent not available on Gas dryer)

, , the order of work.

2-2. Reconnect the another duct[11 in(28cm)] to the blower housing, and attach the duct to the base. (Duct is a SVC part)

3-1. Pre-assemble 4" elbow with 4" duct. Wrap duct tape around joint.

3-2. Insert elbow duct assembly first through the side opening and connect the elbow to the internal duct.

9

Loading...
+ 23 hidden pages