LG 60LA7400, 55LA7400, 47LA6900 User Manual

0 (0)

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

47LA6900 47LA6950 47LA7400 55LA6900 55LA6950 55LA7400 60LA7400

P/NO : MFL67652612 (1302-REV01)

www.lg.com

ENGLISH

2 IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

 

Read these instructions.

 

Keep these instructions.

WARNING/CAUTION

Heed all warnings.

 

Follow all instructions.

RISK OF ELECTRIC SHOCK

 

DO NOT OPEN

 

 

 

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

yyDo not use this apparatus near water.

yyClean only with a dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

IMPORTANT SAFETY INSTRUCTIONS

3

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed

by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyCAUTION concerning the Power Cord (Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do

not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyWarning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

yyDo not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

ENGLISH

ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yyGrounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit

Breaker

yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

yyDo not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

yyOutdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

 

 

 

 

 

 

 

 

 

 

Antenna Lead in Wire

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna Discharge Unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Electric Service

 

 

 

 

 

 

 

 

 

 

 

(NEC Section 810-20)

Equipment

 

 

 

 

 

 

 

 

Grounding Conductor

Ground Clamp

 

 

 

 

 

 

 

 

 

 

 

(NEC Section 810-21)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power Service Grounding

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NEC: National Electrical Code

Electrode System

 

 

 

 

 

 

 

 

 

 

 

 

 

(NEC Art 250, Part H)

yyCleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzine.

yyMoving

Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

yyVentilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yyKeep the product away from direct sunlight. yyNever touch this apparatus or antenna during a

thunder or lightning storm.

yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyDisconnecting the Main Power

The power outlet used with this device must remain easily accessible.

yyStore the accessories (battery, etc.) in a safe location out of the reach of children.

yyThis apparatus use batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

yyDo not dispose of batteries in a fire.

yyDo not short circuit, disassemble or allow the batteries to overheat.

 

 

IMPORTANT SAFETY INSTRUCTIONS

5

yyDot Defect

For USA and Canada

 

 

The Plasma or LCD panel is a high technology

 

 

 

 

 

 

product with resolution of two million to six million

 

 

 

 

 

pixels. In a very few cases, you could see fine dots

 

 

 

 

 

 

FCC NOTICE

 

 

 

on the screen while you’re viewing the TV. Those

 

 

 

 

dots are deactivated pixels and do not affect the

This equipment has been tested and found to

 

performance and reliability of the TV.

 

comply with the limits for a Class B digital device,

yyGenerated Sound

pursuant to Part 15 of the FCC Rules. These limits

 

“Cracking” noise: A cracking noise that occurs

 

are designed to provide reasonable protection

 

when watching or turning off the TV is generated by

 

against harmful interference in a residential

 

plastic thermal contraction due to temperature and

 

installation. This equipment generates, uses and can

 

humidity. This noise is common for products where

 

radiate radio frequency energy and, if not installed

 

thermal deformation is required.

 

and used in accordance with the instructions, may

 

Electrical circuit humming/panel buzzing: A low level

 

cause harmful interference to radio communications.

 

noise is generated from a high-speed switching

 

However, there is no guarantee that interference

 

circuit, which supplies a large amount of current

 

will not occur in a particular installation. If this

 

to operate a product. It varies depending on the

 

equipment does cause harmful interference to radio

 

product.

 

or television reception, which can be determined

 

This generated sound does not affect the

 

by turning the equipment off and on, the user is

 

performance and reliability of the product.

 

encouraged to try to correct the interference by one

yyTake care not to touch the ventilation openings.

or more of the following measures:

 

When watching the TV for a long period, the

 

 

- Reorient or relocate the receiving antenna.

 

ventilation openings may become hot. This does

 

 

 

- Increase the separation between the

 

not affect the performance of the product or cause

 

 

 

equipment and the receiver.

 

defects in the product.

 

 

 

- Connect the equipment to an outlet on a circuit

yyIf the TV feels cold to the touch, there may be a

 

 

different from that to which the receiver is

 

small “flicker” when it is turned on. This is normal,

 

 

 

connected.

 

there is nothing wrong with TV. Some minute dot

 

 

 

- Consult the dealer or an experienced radio/TV

 

defects may be visible on the screen, appearing as

 

 

 

technician for help.

 

tiny red, green, or blue spots. However, they have

 

 

This device complies with part 15 of the FCC Rules.

 

no adverse effect on the TV’s performance. Avoid

 

Operation is subject to the following two conditions:

 

touching the LCD screen or holding your finger(s)

 

(1) this device may not cause harmful interference

 

against it for long periods of time. Doing so may

 

and (2) this device must accept any interference

 

produce some temporary distortion effects on the

 

received, including interference that may cause

 

screen.

 

undesired operation of the device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Any changes or modifications in construction of

 

Preventing “Image burn” or “Burn-in” on your TV

this device which are not expressly approved by

 

the party responsible for compliance could void the

 

screen

 

 

 

 

 

 

 

 

 

 

 

user’s authority to operate the equipment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE TO CABLE/TV INSTALLER

 

 

 

 

 

 

 

 

 

 

 

yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.

yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

ENGLISH

ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment

yyViewing Time

-When watching 3D content, take 5 - 15 minute breaks every hour. Viewing 3D content for a long period of time may cause headache, dizziness, fatigue or eye strain.

Those that have a photosensitive seizure or chronic illness

yySome users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D content.

yyDo not watch 3D videos if you feel nauseous, are pregnant and/ or have a chronic illness such as epilepsy, cardiac disorder, or blood pressure disease, etc.

yy3D Content is not recommended for those who suffer from stereo blindness or stereo anomaly. Double images or discomfort in viewing may be experienced.

yyIf you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than the average adult.

yyIf your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D content.

Symptoms which require discontinuation or refraining from watching 3D content

yyDo not watch 3D content when you feel fatigue from lack of sleep, overwork or intoxication.

yyWhen these symptoms are experienced, stop using/ watching 3D content and get enough rest until the symptom subsides.

-Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball

pain, dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.

CAUTION

Viewing Environment

yyViewing Distance

-Maintain a distance of at least twice the screen diagonal length when watching 3D content. If you feel discomfort in viewing 3D content, move further away from the TV.

Viewing Age

yyInfants / Children

-Usage/ Viewing 3D content for children under the age of 5 are prohibited.

-Children under the age of 10 may overreact and become overly excited because their vision is in development (for example: trying to touch the screen or trying to jump into it. Special monitoring and extra attention is required for children watching 3D content.

-Children have greater binocular disparity of 3D presentations than adults because the distance between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth compared to adults for the same 3D image.

yyTeenagers

-Teenagers under the age of 19 may be stimulated to light coming from 3D videos. Advise them not to watch 3D videos for a long time when they are tired.

yyElderly

-The elderly may perceive less of a 3D effect than the youth. Do not sit closer to the TV than the recommended distance.

Cautions when using the 3D glasses

yyOnly use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

yyDo not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.

yyUsing modified 3D glasses may cause eye strain or image distortion.

yyDo not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

yyThe 3D glasses are fragile and are easy to scratched. Use a soft, clean piece of cloth when wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with chemicals.

LICENSES / OPEN SOURCE SOFTWARE NOTICE 7

LICENSES

Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.” “DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.

ENGLISH

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit ‘http://opensource.lge.com’.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to ‘opensource@lge.com’. This offer is valid for three (3) years from the date on which you purchased the product.

ENGLISH

8 TABLE OF CONTENTS

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

6Viewing 3D Imaging

7LICENSES

7OPEN SOURCE SOFTWARE NOTICE

8TABLE OF CONTENTS

9Installation Procedure

9 ASSEMBLING AND PREPARING

9 Unpacking

11Optional Extras

12Parts and Buttons

13Lifting and moving the TV

14Setting up the TV

14- Attaching the stand

15- Mounting on a table

16- Tidying cables

17- Mounting on a wall

18MAKING CONNECTIONS

18Connecting to an antenna or cable

19Connecting to a HD receiver, DVD Player or VCR

19- HDMI Connection

20- DVI to HDMI Connection

21- Connecting to a mobile phone

22- Component Connection

23- Composite Connection

24Connecting a PC

24 - HDMI Connection DVI to HDMI Connection

26Connecting to an Audio System

26- Digital Optical Audio Connection

27Connecting Headphones

27 Connecting a USB Device

28Magic Remote Control Functions

29Registering Magic Remote Control

29 How to use Magic Remote Control

29Precautions to Take when Using the Magic Remote Control

30WATCHING TV

30Turning the TV on for the first time

31Using the user guide

32SPECIFICATIONS

36external control device setup

37MAINTENANCE

37 Cleaning Your TV

37 - Screen, frame, cabinet and stand

37 - Power cord

37 TROUBLESHOOTING

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.

yyThe available menus and options may differ from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9

Installation Procedure

1

2

3

4

Open the package and make sure all the accessories are included.

Attach the stand to the TV set.

Connect an external device to the TV set.

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty.

yySome models appear to have a thin film on the screen. It is actually part of the screen, do not remove it.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

AA

ENGLISH

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

10 ASSEMBLING AND PREPARING

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Magic Remote Control,

 

 

 

 

 

 

 

Owner’s Manual

 

Power Cord

Batteries (AA)

 

 

 

 

 

 

(See p.28)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cinema 3D Glasses

 

Stand Screws

Cable Holder

The number of 3D glasses may

 

4 EA, M4 x 20

(See p.16)

differ depending on the model

 

(See p.14)

 

or country.

 

 

 

 

 

 

 

 

 

Tag On

Stand Base

 

Tag On

(See p.14)

 

Near Field Communication (NFC)

 

 

tag.

 

 

 

ASSEMBLING AND PREPARING 11

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items.

These devices only work with certain models.

The model name or design may be changed manufacturer’s circumstances or policies.

AN-MR400

AG-F***

 

AG-F**DP

Magic Remote

Cinema 3D Glasses. All glasses

 

Dual Play Glasses. For playing

 

 

with the Cinema 3D logo

 

head-to-head games. Converts

 

 

support the TVs in this manual.

 

most 2 player split-screen

 

 

 

 

games to full screen.

 

 

 

 

 

Tag On

AN-VC***

 

Tag On

 

LG Audio device

Video Call Camera

 

Near Field Communication (NFC)

 

 

 

 

tag.

 

 

 

 

 

 

 

ENGLISH

12 ASSEMBLING AND PREPARING

Parts and Buttons

For LA6900, LA6950 series, 47, 55LA7400

Screen

ENGLISH

OK

SETTINGS

INPUT

 

 

 

 

Speakers

 

 

Buttons

 

 

 

 

Remote control and

 

 

Intellgent sensors1

 

 

Logo light

For 60LA7400

Screen

OK

SETTINGS

INPUT

Speakers

Buttons

Remote control and

Intellgent sensors1

Logo light

 

 

Button

Description

 

 

 

 

 

 

/

(

/

)

Scrolls through the saved channels.

 

 

 

 

 

 

/

 

/

)

Adjusts the volume level.

 

 

 

 

 

 

 

 

(OK

)

 

 

 

Selects the highlighted menu option or confirms an input.

 

 

 

 

(SETTINGS)

 

Accesses the main menus, or saves your input and exits the menus.

 

 

 

 

 

(INPUT

 

)

 

Changes the input source.

 

 

 

 

 

 

 

 

(

)

 

 

 

Turns the power on or off.

 

 

 

 

 

 

 

 

 

 

1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

ASSEMBLING AND PREPARING 13

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

CAUTION

yyAvoid touching the screen at all times, as this may result in damage to the screen.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in. yyBefore moving or lifting the TV, disconnect the

power cord and all cables.

yyWhen holding the TV, the screen should face away from you to avoid damage.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

ENGLISH

yyWhen transporting a large TV, there should be at least 2 people.

yyWhen transporting the TV by hand, hold the TV as shown in the following illustration.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

LG 60LA7400, 55LA7400, 47LA6900 User Manual

ENGLISH

14 ASSEMBLING AND PREPARING

Setting up the TV

You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

CAUTION

yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.

NOTE

yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

1

4

Front

Stand Base

M4 x 20

M4 x 20

 

 

2 EA

2 EA

2

Wrapping bag

(Depending on model)

 

3

 

 

ASSEMBLING AND PREPARING 15

Mounting on a table

 

 

 

Adjusting the angle of the TV to suit view

 

1 Lift and tilt the TV into its upright position on a table.

Swivel 10 degrees to the left or right and adjust the

angle of the TV to suit your view.

- Leave a 10 cm (minimum) space from the wall for

 

 

 

 

proper ventilation.

 

 

 

 

10 cm

10 cm (4 inches)

10

cm

 

10 cm

Swivel 8 degrees to the left or right and adjust the angle of the TV to suit your view.

2 Connect the power cord to a wall outlet.

CAUTION

yyDo not place the TV near or on sources of heat, as this may result in fire or other damage.

ENGLISH

CAUTION

yyInstall the product on a flat surface for easy swivel. Make sure to use the TV cabinet or stand that can properly support the TV.

yyAfter installing the TV, the angle of the screen can be adjusted to the left or right.

yyWhen adjusting the angle, make sure there are no objects near the TV and the TV has enough distance from the wall. A space of at least 5 cm on the front and 10 cm on the back should be available. Otherwise, the product could fall due to

balance problems, which may cause personal injury or damage to the product.

16 ASSEMBLING AND PREPARING

Securing the TV to a wall (optional)

Tidying cables

(Depending on model)

1 Gather and bind the cables with the cable holder on

 

 

the back of the TV.

ENGLISH

bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat surface.

CAUTION

sure that children do not climb on or hang on TV.

NOTE

platform or cabinet that is strong and large enough to support the TV securely.

yyBrackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.

2 Gather

cable

Cable Management Clip

CAUTION

not move the TV by holding the cable holder cable management clip, as the cable holders

may break, and injuries and damage to the TV may occur.

Loading...
+ 36 hidden pages