LG 42LH260H, SAC34026004, 32LH240H, 37LH250H, 37LH265H User Manual

...
0 (0)

LCD TV

OWNER’S MANUAL

32LH240H 37LH260H 32LH250H 42LH260H 37LH250H 37LH265H 42LH250H

32LH255H

37LH255H

42LH255H

please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set. See the label attched on the back cover and quote this information to your dealer

when you require service.

Model:

Serial:

 

1-800-243-0000

USA, Consumer User

 

This product qualifies for ENERGY STAR in the “factory default

1-888-865-3026

USA, Commercial User

 

(Home Use)” setting.

1-888-542-2623

CANADA

 

 

 

 

Changing the factory default settings or enabling other fea-

LG Customer Information Center

 

 

 

 

tures may increase power consumption that could exceed the

 

 

 

limits necessary to quality for ENERGY STAR.

P/NO : SAC34026004 (0912-REV00)

www.lgcommercial.com

WARNING / CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence

of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture.

FCC NOTICE

Class B digital device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product

1

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

1Do not use this apparatus near water.

2Clean only with dry cloth.

3Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

4Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.

5Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

6Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

7Only use attachments/accessories specified by the manufacturer.

8Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

9Unplug this apparatus during lighting storms or when unused for long periods of time.

10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

2

11

Never touch this apparatus or antenna during a

 

thunder or lighting storm.

 

 

12

When mounting a TV on the wall, make sure not to

 

install the TV by the hanging power and signal

 

cables on the back of the TV.

 

 

13 Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something.

14 CAUTION concerning the Power Cord :

It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

15 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.

16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).

17 GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grouned AC outlet) If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.

Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power

Supply

Short-circuit

Breaker

18 DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.

3

19

ANTENNAS

 

 

 

Outdoor antenna grounding

 

 

 

If an outdoor antenna is installed, follow the precau-

 

tions below. An outdoor antenna system should not

 

be located in the vicinity of overhead power lines or

 

other electric light or power circuits, or where it can

 

come in contact with such power lines or circuits as

 

death or serious injury can occur.

 

 

 

Be sure the antenna system is grounded so as to pro-

 

vide some protection against voltage surges and

 

built-up static charges.

 

 

 

Section 810 of the National Electrical Code (NEC) in

 

the U.S.A. provides information with respect to prop-

 

er grounding of the mast and supporting structure,

 

grounding of the lead-in wire to an antenna dis-

 

charge unit, size of grounding conductors, location of

 

antenna discharge unit, connection to grounding

 

electrodes and requirements for the grounding elec-

 

trode.

 

 

 

Antenna grounding according to the

 

National Electrical Code, ANSI/NFPA 70

 

Ground Clamp

Antenna Lead in Wire

 

 

 

 

 

 

 

 

Antenna Discharge Unit

 

 

 

 

(NEC Section 810-20)

 

 

 

 

Grounding Conductors

 

Electric Service

(NEC Section 810-21)

 

 

 

 

Equipment

Ground Clamps

 

 

 

 

 

 

 

 

Power Service Grounding

 

 

 

 

Electrode System (NEC

 

 

 

 

Art 250, Part H)

 

NEC: National Electrical Code

 

 

 

 

 

 

20

Cleaning

 

 

 

When cleaning, unplug the power cord and scrub

 

gently with a soft cloth to prevent scratching. Do not

 

spray water or other liquids directly on the TV as

 

electric shock may occur. Do not clean with chemi-

 

cals such as alcohol, thinners or benzene.

 

 

 

 

21

Moving

 

 

 

Make sure the product is turned off, unplugged

 

and all cables have been removed. It may take 2 or

 

more people to carry larger TVs. Do not press

 

against or put stress on the front panel of the TV.

4

22

Ventilation

 

 

 

Install your TV where there is proper ventilation. Do

 

 

 

not install in a confined space such as a bookcase.

 

 

 

Do not cover the product with cloth or other mate-

 

 

 

rials (e.g.) plastic while plugged in. Do not install in

 

 

 

excessively dusty places.

 

 

 

 

 

23

Take care not to touch the ventilation openings.

 

 

 

When watching the TV for a long period, the venti-

 

 

 

lation openings may become hot.

 

 

 

 

 

24

If you smell smoke or other odors coming from the

 

 

 

TV or hear strange sounds, unplug the power cord

 

 

 

contact an authorized service center.

 

 

 

 

 

25

Do not press strongly upon the panel with a hand or

 

sharp object such as nail, pencil or pen, or make a

 

scratch on it.

26

Keep the product away from direct sunlight.

 

 

27

For LCD TV

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

ON DISPOSAL

(Only Hg lamp used LCD TV)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.

WARNING / CAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1

SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .

. 2

FEATURES OF THIS TV . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 7

PREPARATION

 

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 8

Front Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 9

Back Panel Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Stand Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

VESA Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Cable Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

15

Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Attaching the TV to a desk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Securing the TV to the wall to prevent falling

 

When the TV is used on a stand . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Antenna or Cable Connection . . . . . . . . . . . . . . . . . . . . . . . . . .

19

EXTERNAL EQUIPMENT SETUP

 

HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

USB Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

WATCHING TV / CHANNEL CONTROL

Remote Control Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Turning On TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

On-Screen Menus Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Channel Setup

- Auto Scan (Auto Tuning) . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

- Add / Delete Channel (Manual Tuning) . . . . . . 39

- Channel Editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Channel Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

CONTENTS

USB

Entry Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

PICTURE CONTROL

Picture Size (Aspect Ratio) Control . . . . . . . . . . . . . . . . . . 52

Preset Picture Settings

- Picture Mode - Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

- Color Tone Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Manual Picture Adjustment - User Mode . . . . . . . . . . 56

Picture Improvement Technology . . . . . . . . . . . . . . . . . . . . . 57

Advanced Control - Black (Darkness) Level . . . . . . . 58

Advanced Control - Eye Care . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Advanced Control - Film Mode . . . . . . . . . . . . . . . . . . . . . . . . .60 Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Demo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

SOUND & LANGUAGE CONTROL

Auto Volume Leveler (Auto Volume) . . . . . . . . . . . . . . . . . 62

Preset Sound Settings (Sound Mode) . . . . . . . . . . . . . . 63

Sound Setting Adjustment - User Mode . . . . . . . . . . . 64

- SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

TV Speakers On/Off Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Stereo/SAP Broadcast Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Audio Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

On-Screen Menus Language Selection . . . . . . . . . . . . . . 72

Caption Mode

- Analog Broadcasting System Captions . . . . . . . 73

- Digital Broadcasting System Captions . . . . . . . . 74

- Caption Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

TIME SETTING

Clock Setting

- Auto Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

- Manual Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Auto On/Off Time Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

5

PARENTAL CONTROL / RATINGS

Set Password & Lock System . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Channel Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Movie & TV Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Downloadable Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

External Input Blocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

APPENDIX

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Open Source License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

6

FEATURES OF THIS TV

HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."

View videos and photos and listen to music on your TV through USB 2.0 (‘videos’ dependent on model).

High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions.

LG TV include a unique invisible speaker system, tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result is a clean, polished look, and enhanced audio by increasing the “sweet spot”, giving a wider and richer sound field.

Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.

is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells.

Matches the original frame rate of the film for a more film-like experience

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN

/BURN-IN” ON YOUR TV SCREEN

When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as “image burn” or “burn-in.” Image burn is not covered under the manufacturer’s warranty.

In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Image burn can also occur on the letterboxed

areas of your TV if you use the 4:3 aspect ratio setting for an extended period.

7

PREPERATION

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

The accessories included may differ from the images

LIST

VOL

ENTER

RETURN

8

6

0

9

 

 

 

 

 

MA

 

 

 

 

 

 

RK

 

 

 

 

 

RATIO

OW

 

 

 

 

 

 

P

 

 

 

 

1

 

ER

 

 

 

 

 

IN

 

 

 

4

 

2

PUT

 

 

 

 

CC

 

 

7

 

5

 

3

 

LI

 

8

6

 

 

ST

0

9

 

VOL

 

 

M

 

FLASHBK

 

 

 

 

UTE

 

 

 

 

 

CH

AP

 

 

 

ENTER

 

EG

 

 

 

 

 

 

 

 

 

 

MENU

 

TIMER

ALAM

RETURN

 

SAP

 

EJECT

Owner’s Manual

CD Manual

Not included with all models

*

Wipe spots on the exterior only with

 

the polishing cloth.

*

Do not wipe roughly when removing

Polishing Cloth

stain. Excessive pressure may cause

scratch or discoloration.

 

x 4

x 2

Remote Control,

Power Cord

Batteries

 

Option Extras

When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain

standards compliance.

D-sub 15 pin Cable

Bolts for stand assembly

Torx plus

Screw for stand fixing

Protection Cover

(Refer to P.12)

Star head screw

(Refer to P.17)

(Refer to P.13)

 

(Refer to P.12)

 

 

Protective Bracket and Bolt for

Cable Holder

Plug in type holder

Power Cord

(Refer to P.15)

(Refer to P.15)

(This feature is not available for all models.)

 

 

(Refer to P.15)

 

 

8

FRONT PANEL INFORMATION

Image shown may differ from your TV.

SPEAKER

Remote Control Sensor,

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates blue when the TV is switched on.

 

PREPARATION

CH

CHANNEL (D,E)

Buttons

 

VOL

VOLUME (+, -)

Buttons

 

ENTER

ENTER Button

 

MENU

MENU Button

INPUT

INPUT Button

 

POWER Button

9

LG 42LH260H, SAC34026004, 32LH240H, 37LH250H, 37LH265H User Manual

PREPARATION

BACK PANEL INFORMATION

 

Image shown may differ from your TV.

 

 

 

IN

15

 

USB

PREPARATION

 

AUDIO R

ANTENNA IN

M.P.I.

L/MONO

 

 

14

VIDEO

13

 

 

 

AV IN 2

32/37/42LH250H, 32/37/42LH255H, 37/42LH260H, 37LH265H

 

2

7

10

GAME

 

 

 

 

 

CONTROL

AV IN 1

 

4

 

1

VIDEO

AUDIO

 

 

 

 

 

RESET

UPDATE

 

 

 

 

 

 

L(MONO)

R

RGB IN (PC)

RJP

 

 

 

 

2

8

 

 

 

 

AUDIO IN

 

 

L

R

 

 

 

 

 

VIDEO

 

AUDIO

1

 

COMPONENT IN

 

(RGB/DVI)

 

 

 

 

 

/DVI IN

TV - LINK

 

 

 

 

 

CFG

3

 

RS-232C IN

 

SPEAKER OUT

REMOTE

(SERVICE ONLY)

11

(8 )

CONTROL OUT

 

 

 

 

5

 

6

9

 

32LH240H

 

 

 

 

 

 

2

 

 

 

 

7

10

AV IN 1

 

 

4

 

 

 

 

 

 

 

 

VIDEO

AUDIO

 

 

 

 

 

 

 

 

 

RESET

UPDATE

 

L(MONO)

R

 

 

RGB IN (PC)

RJP

 

 

 

2

 

 

8

 

 

 

 

 

AUDIO IN

 

L

R

 

 

 

 

 

 

 

 

VIDEO

AUDIO

1

 

 

 

COMPONENT IN

 

 

/DVI IN

(RGB/DVI)

 

 

 

 

 

 

 

3

 

 

 

 

RS-232C IN

 

 

 

 

 

 

 

 

 

SPEAKER OUT

REMOTE

(SERVICE ONLY)

 

 

 

 

 

 

 

(8

)

CONTROL OUT

 

 

 

5

 

6

9

 

12

2

10

1GAME CONTROL

Control port

2AV (Audio/Video) IN

Analog composite connection. Supports standard definition video only (480i).

Used for PC/DTV audio input jack.

3COMPONENT IN

Analog Connection. Supports HD.

Uses a red, green, and blue cable for video & a red and white cable for audio.

4HDMI/DVI IN

Digital Connection. Supports HD video and Digital audio.

Accepts DVI video using an adapter or HDMI to DVI cable (not included)

5SPEAKER OUT 8Ω

Connect to external speaker input.

6REMOTE CONTROL OUT

IR output for controlling an auxiliary device.

7UPDATE

Enables/disables software downloads and debug mode.

RESET

Performs a hardware reset.

8 RGB IN (PC)

Analog PC Connection. Uses a D-sub 15 pin cable (VGA cable).

AUDIO IN (RGB/DVI)

1/8” headphone jack for analog PC audio input.

9RS-232C IN (SERVICE ONLY)

Used for software updates.

10RJP (REMOTE JACK PACK PORT)

Connect to remote jack pack control output port.

11TV - LINK CFG

Used for FTG Configuration

12USB IN

Used for viewing photos and listening to MP3s.

13ANTENNA IN

Connect over-the air signals to this jack.

14M.P. I.

Control port.

15Power Cord Socket

For operation with AC power.

Caution: Never attempt to operate the TV on DC power.

PREPARATION

11

PREPARATION

PREPARATION

STAND INSTRUCTION

Image shown may differ from your TV.

INSTALLATION

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2

3

Assemble the TV as shown.

x 4

Tighten the stand with the four screws (provided as parts of the TV).

 

or

x 2

Tighten the two of these four screws

x 2 and the two Torx plus star head

 

screws (provided as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).

! NOTE

G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten.

G When assembling the stand as in figure 2 above, you can hear some disturbing noise which is by the cable management disturbing the stand. Please ignore the noise and try again assembling the stand after setting the cable management in the right position.

12

DETACHMENT

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Loose the bolts from TV.

3Detach the stand from TV.

PROTECTION COVER

After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click.

PREPARATION

13

PREPARATION

PREPARATION

VESA WALL MOUNTING

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer.

If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

We recommend that you use an LG brand wall mount when mounting the TV to a wall.

LG recommends that wall mounting be performed by a qualified professional installer.

 

VESA (A * B)

Wall Mounting Bracket

Model

A

Standard Screw Quantity

 

B

(sold separately)

 

 

32LH240H,

200 * 100

M4

4

 

32LH250H,

 

 

 

 

 

32LH255H

 

 

RW230

AW-47LG30M

37LH250H,

 

 

 

 

37LH255H,

 

 

 

 

37LH260H,

 

 

 

 

37LH265H,

200 * 200

M6

4

 

42LH255H,

 

 

 

 

42LH260H,

 

 

AW-47LG30M

42LH265H

 

 

 

 

! NOTE

G Screw length needed depends on the wall mount used. For further information, refer to the instructions included with the mount.

G Standard dimensions for wall mount kits are shown in the table.

G When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

G Do not use screws longer then the standard dimension, as they may cause damage to the inside to the TV.

G For wall mounts that do not comply with the VESA

standard screw specifications, the length of the screws may differ depending on their specifications.

G Do not use screws that do not comply with the VESA standard screw specifications.

Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents.

G LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installation instructions.

CAUTION G Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock.

14

CABLE MANAGEMENT

Image shown may differ from your TV.

1 Connect the cables as necessary.

3 Put the cables inside the CABLE MANAGEMENT

To connect additional equipment, see the

CLIP and snap it closed.

EXTERNAL EQUIPMENT SETUP section.

 

Secure the power cable with the PROTECTIVE BRACKET/Screw or the Plug in type Holder. It will help prevent the power cable from being removed by accident.

PROTECTIVE BRACKET/Screw

 

(This feature is not available for

 

all models.)

Or

 

PLUG IN TYPE HOLDER

2Install the CABLE MANAGEMENT CLIP as shown.

If your TV has the CABLE HOLDER, install it as shown and bundle the cables.

CABLE MANAGEMENT CLIP

CABLE HOLDER

! NOTE

G Do not hold the CABLE MANAGEMENT CLIP when moving the TV.

-If the TV is dropped, you may be injured or the product may be broken.

G With some TVs, the PLUG IN TYPE HOLDER and the CABLE HOLDER are included. If these holders are inserted into the hole provided on back of the TV, they cannot be removed.

PREPARATION

15

PREPARATION

PREPARATION

DESKTOP PEDESTAL INSTALLATION

Image shown may differ from your TV.

For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.

4 inches

4 inches

4 inches

4 inches

CAUTION G Ensure adequate ventilation by following the clearance recommendations.

G Do not mount near or above any type of heat source.

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 90 degrees to suit your viewing position.

16

ATTACHING THE TV TO A DESK

Image shown may differ from your TV.

The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.

Stand

Desk

4-Screws

(not provided as parts of the product)

G Screw: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15mm, Screw: M5 x 25

1-Screw

(provided as parts of the product)

Stand

Desk

WARNING

G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

PREPARATION

17

PREPARATION

PREPARATION

SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND

You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount).

Image shown may differ from your TV.

We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.

Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product.

Caution: Please make sure that children don’t climb on or hang from the TV.

Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.

*If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product.

Ensure the eye-bolts or brackets are tightened securely.

Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

G Use a platform or cabinet strong enough and large enough to support the size and weight of the TV.

G To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.

18

To prevent damage do not connect to the power outlet until all connections are made between the devices.

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box

Connection.

For optimum picture quality, adjust the direction if needed.

Wall

Multi-family Dwellings/Apartments

 

(Connect to wall antenna socket)

 

Antenna

 

ANTENNA IN

Socket

 

 

Outdoor

RF Coaxial Wire (75 ohm)

Antenna

 

 

(VHF, UHF)

Single-family Dwellings /Houses

Copper Wire

 

(Connect to wall jack for outdoor antenna)

 

 

 

 

Be careful not to bend the copper wire

 

 

when connecting the antenna.

2. Cable

ANTENNA IN

Cable TV

Wall Jack

RF Coaxial Wire (75 ohm)

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

If the antenna is not installed properly, contact your dealer for assistance.

PREPARATION

19

EXTERNAL EQUIPMENT SETUP

PREPARATION

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air or Digital Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect

Y PB PR L R

1Connect the video outputs (Y, PB, PR) of the digital settop box to the COMPONENT IN VIDEO jacks on

the TV. Match the jack colors (Y = green, PB = blue, and PR = red).

2

Connect the audio output of the digital set-top box to

1

2

 

 

 

the COMPONENT IN AUDIO jacks on the TV.

GAME

 

 

 

 

 

 

CONTROL

1

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

 

 

2. How to use

 

 

 

 

 

Turn on the digital set-top box.

 

 

2

 

 

(Refer to the owner’s manual for the digital set-top box.)

VIDEO

AUDIO

1

 

 

 

 

 

L

R

 

 

 

 

COMPONENT IN

 

 

 

Select Component input source using the INPUT button

 

 

 

 

/DVI IN

on the remote control.

 

 

 

 

 

 

 

 

 

SPEAKER OUT REMO

 

 

 

 

(8

)

CONTRO

Supported Resolutions

 

 

Y, CB/PB, CR/PR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Resolution

Horizontal

Vertical

Signal

Component

HDMI

 

 

Frequency(KHz) Frequency(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

480i

Yes

No

720x480i

 

15.73

59.94

 

 

 

 

 

480p

Yes

Yes

 

15.73

60.00

 

 

720p

Yes

Yes

720x480p

 

31.47

59.94

 

 

 

 

 

31.50

60.00

1080i

Yes

Yes

 

 

 

 

 

 

1080p

Yes

Yes

1280x720p

 

44.96

59.94

 

 

 

 

 

 

45.00

60.00

 

 

 

 

 

 

 

 

 

 

1920x1080i

 

33.72

59.94

 

 

 

 

 

33.75

60.00

 

 

 

 

 

 

 

 

 

 

 

 

67.432

59.94

 

 

 

 

 

 

67.50

60.00

 

 

 

 

1920x1080p

 

27.00

24.00

 

 

 

 

 

 

26.97

23.976

 

 

 

 

 

 

33.75

30.00

 

 

 

 

 

 

33.71

29.97

 

 

 

 

 

 

 

 

20

HDMI Connection

1. How to connect

Connect the digital set-top box to HDMI /DVI IN 1

1or HDMI 2 jack on the TV.

2No separate audio connection is necessary. HDMI supports both audio and video.

 

AV IN 1

 

 

RESET

UPDATE

 

 

 

 

 

VIDEO

AUDIO

 

RGB IN (PC)

 

 

L(MONO)

R

 

AUDIO IN

 

 

 

 

 

 

 

 

 

2

 

 

EO

L

R

 

(RGB/DVI)

 

AUDIO

1

 

 

MPONENT IN

 

 

 

 

 

 

 

/DVI IN

RS-232C IN

 

 

 

 

 

(SERVICE ONLY)

 

 

 

 

SPEAKER

OUT

 

 

 

 

(8

 

2.How to use

Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

Select HDMI1 or HDMI2 input source with using the INPUT button on the remote control.

1

HDMI OUTPUT

HDMI-DTV

Resolution

Horizontal

Vertical

 

Frequency(KHz) Frequency(Hz)

 

 

 

 

 

 

 

 

31.47

59.94

 

720x480p

 

31.47

60.00

 

 

 

1280x720p

44.96

59.94

 

45.00

60.00

 

 

 

1920x1080i

33.72

59.94

 

33.75

60.00

 

 

 

 

67.432

59.939

 

 

67.50

60.00

 

1920x1080p

27.00

24.00

 

 

26.97

23.976

 

 

33.75

30.00

 

 

33.71

29.97

 

 

 

 

 

SETUP EQUIPMENT EXTERNAL

21

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

DVI to HDMI Connection

1. How to connect

 

 

GAME

 

 

 

Connect the DVI output of the digital set-top box to

ONTROL

AV IN 1

 

1

 

RGB IN (PC)

the HDMI/DVI IN 1 jack on the TV.

VIDEO

AUDIO

 

 

 

 

 

 

 

 

L(MONO) R

AUDIO IN

 

 

 

 

 

 

 

 

2

2Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.

2.How to use

Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

Select the HDMI1 input source on the TV using the INPUT button on the remote control.

L

R

(RGB/DVI)

VIDEO AUDIO 1

COMPONENT IN

IN

 

RS

IN

SPEAKER

OUT

 

(8 )

 

1 2

 

 

 

 

 

DVI OUTPUT

L

R

AUDIO

! NOTE

G A DVI to HDMI cable or adapter is required for this connection. DVI doesn't support audio, so a separate audio connection is necessary.

22

DVD SETUP

Component Connection

1. How to connect

1

Connect the video outputs (Y, PB, PR) of the DVD to the

 

COMPONENT IN VIDEO jacks on the TV.

 

Y PB PR L R

 

Match the jack colors (Y = green, PB = blue, and PR = red).

2Connect the audio outputs of the DVD to the

COMPONENT IN AUDIO jacks on the TV.

 

 

1

2

 

 

 

 

 

 

GAME

 

 

 

 

 

 

 

CONTROL

 

 

 

 

R

 

 

 

1

 

 

 

2. How to use

 

 

 

 

 

 

AUDIO

 

 

 

 

 

 

 

 

 

 

 

Turn on the DVD player, insert a DVD.

 

 

 

2

 

 

Select the Component input source on the TV using the

VIDEO

L

R

 

 

(

 

INPUT button on the remote control.

AUDIO

 

1

 

 

 

COMPONENT IN

 

 

 

 

Refer to the DVD player's manual for operating instructions.

 

 

 

 

 

/DVI IN

 

 

 

 

 

 

 

 

 

 

 

SPEAKER OUT REMOTE

 

 

 

 

 

(8

)

CONTROL O

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Y

PB

PR

 

 

 

 

 

 

 

 

 

Y

PB

PR

Video output ports

Y

B-Y

R-Y

on DVD player

Y

Cb

Cr

 

Y

Pb

Pr

 

 

 

 

SETUP EQUIPMENT EXTERNAL

23

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

Composite (RCA) Connection

 

 

 

 

 

1. How to connect

GAME

 

 

 

 

CONTROL

AV IN 1

 

 

R

 

 

 

 

 

 

 

VIDEO

AUDIO

 

 

 

1

Connect the AUDIO/VIDEO jacks between TV and

 

 

 

 

 

DVD. Match the jack colors (Video = yellow, Audio Left

 

L(MONO)

 

 

 

 

 

 

2

 

 

 

= white, and Audio Right = red).

 

 

 

 

 

 

 

 

 

(

 

 

VIDEO

 

1

 

 

 

 

 

 

 

 

COMPONENT

 

 

 

 

 

 

 

 

 

/DVI IN

2. How to use

 

 

SPEAKER OUT REMOTE

 

 

 

 

Turn on the DVD player, insert a DVD.

 

1

(8

)

CONTROL OU

 

 

 

 

 

 

 

 

 

Select the or AV1 input source on the TV using the INPUT button on the remote control.

If connected to AV IN 2, select AV2 input source on the TV.

Refer to the DVD player's manual for operating instructions.

VIDEO L R AUDIO

HDMI Connection

1. How to connect

1Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI 2 jack on the TV.

2No separate audio connection is necessary. HDMI supports both audio and video.

2.How to use

Select the HDMI1 or HDMI2 input source on the TV using the INPUT button on the remote control.

Refer to the DVD player's manual for operating instructions.

 

AV IN 1

 

RESET

UPDAT

VIDEO

AUDIO

RGB IN (PC)

 

 

 

 

L(MONO)

R

AUDIO IN

 

 

 

 

 

 

2

 

 

L

R

(RGB/DVI)

EO

AUDIO

1

 

OMPONENT IN

 

 

 

 

 

 

IN

RS-232C IN

 

 

 

 

(SERVICE ONLY)

SPEAKER

(8 OUT

1

HDMI OUTPUT

24

VCR SETUP

Antenna Connection

1.How to connect

1 Connect the RF antenna out socket of the VCR to the ANTENNA IN socket on the TV.

2Connect the antenna cable to the RF antenna in socket of the VCR.

2.How to use

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

ANTENNA IN

1

S-VIDEO

VIDEO

L

R

ANT OUT

OUTPUT

 

 

ANT IN

SWITCH

 

 

 

 

Wall Jack

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna

Composite (RCA) Connection

 

 

 

1. How to connect

 

GAME

 

 

CONTROL

AV IN

 

 

 

 

1

Connect the AUDIO/VIDEO jacks

between TV and

VIDEO

AUDIO

 

 

 

VCR. Match the jack colors (Video = yellow, Audio Left

 

L(MONO)

 

= white, and Audio Right = red)

 

 

2

 

 

 

 

 

 

 

VIDEO

1

2. How to use

 

COMPONENT

 

 

/DVI IN

Insert a video tape into the VCR and press PLAY on the

 

1

 

 

VCR. (Refer to the VCR owner’s manual.)

 

 

 

Select the AV1 input source on the TV using the INPUT button on the remote control.

If connected to AV IN 2, select AV2 input source on the TV.

ANT IN S-VIDEO VIDEO

L

R

AUDIO

! NOTE

 

 

 

 

SWITCH

 

ANT OUT OUTPUT

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) jack of the TV.

SETUP EQUIPMENT EXTERNAL

25

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

1. How to connect

Connect the AUDIO/VIDEO jacks

 

1

between TV and external equipment.

 

 

 

 

 

 

Match the jack colors.

EXTERNAL

 

 

(Video = yellow, Audio Left = white, and

 

 

Audio Right = red)

 

 

 

 

 

 

 

EQUIPMENT

2. How to use

input source on the TV.

 

Select the AV2 input source on the TV using the

 

INPUT button on the remote control.

SETUP

If connected to AV IN 1 input, select the AV1

Operate the corresponding external equipment.

 

Camcorder

Video Game Set

VIDEO L R

INUSB 1

AUDIO R

L/MONO

VIDEO

AV IN 2

26

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

 

 

 

 

O

 

 

RESET

UPDATE

 

VGA (D-Sub 15 pin) Connection

 

 

 

RGB IN (PC)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. How to connect

 

 

R

 

 

 

 

 

 

 

 

2

 

AUDIO IN

 

 

 

 

 

 

 

 

 

 

 

Connect the PC audio output to

the

AUDIO

R

(8

)

CONTROL OUT

 

EXTERNAL

 

IN

 

1

 

 

 

O

1

 

(RGB/DVI)

 

 

Connect the VGA output of the PC to the RGB

IN

 

 

/DVI IN

 

 

 

(P C) jack on the TV.

 

 

 

 

 

RS-232C IN

 

 

 

 

 

 

 

 

SERVICE ONLY)

 

2

 

 

 

 

SPEAKER OUT

REMOTE

 

 

 

 

 

 

 

 

 

 

EQUIPMENT

Turn on the PC and the TV.

 

 

 

 

 

 

 

 

(RGB/DVI) jack on the TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

1

 

 

 

 

 

 

 

 

 

 

2. How to use

 

 

 

 

 

 

 

SETUP

Select the RGB-PC input source on the TV using the

 

 

 

 

 

 

 

 

 

 

 

INPUT button on the remote control.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

RGB OUTPUT

 

DVI to HDMI Connection

1. How to connect

1

Connect the DVI output of the PC to the HDMI/DVI IN

1 jack on the TV.

 

 

AV IN 1

 

RESET

UPDATE

VIDEO

AUDIO

RGB IN (PC)

 

 

 

 

 

 

L(MONO)

R

AUDIO IN

 

 

 

 

 

 

 

 

2

 

 

L

R

(RGB/DVI)

 

VIDEO

AUDIO

 

1

 

 

 

COMPONENT IN

 

 

 

2

Connect the PC audio output to the AUDIO

IN

 

IN

RS-232C IN

(RGB/DVI) jack on the TV.

 

 

 

(SERVICE ONLY)

 

 

 

 

 

 

 

SPEAKER

)

REMOTE

 

 

 

(8

CONTROL OUT

 

 

 

 

1

2

2. How to use

 

 

 

 

Turn on the PC and the TV.

 

 

 

 

Select the HDMI1 input source on the TV using the

 

 

 

 

INPUT button on the remote control.

 

 

 

 

 

 

DVI OUTPUT

AUDIO

27

EXTERNAL EQUIPMENT SETUP

Supported Display Specifications

(RGB-PC, HDMI-PC)

For 32LH240H, 32/37/42LH250H, 32/37/42LH255H

EXTERNAL

 

 

 

 

640x350

31.469

70.08

 

 

 

Resolution

Horizontal

Vertical

 

 

 

Frequency(KHz)

Frequency(Hz)

 

 

 

 

 

 

 

EQUIPMENT

RGB-PC

 

 

 

720x400

31.469

70.08

 

 

 

 

 

 

RGB-PC

 

 

 

 

 

 

 

 

640x480

31.469

59.94

 

 

 

RGB-PC

 

 

 

 

 

 

 

 

800x600

37.879

60.31

 

SETUP

1024x768

48.363

60.00

 

1280x768

47.776

59.87

 

 

 

 

 

 

1360x768

47.720

59.799

 

 

 

1366x768

47.13

59.65

 

 

 

 

 

 

 

For 37/42LH260H, 37LH265H

Resolution

Horizontal

Vertical

Frequency(KHz)

Frequency(Hz)

640x480

31.469

59.9

RGB-PC

 

 

 

35.156

56.25

800x600

37.879

60.31

 

1024x768

48.363

60.00

1024x768

56.476

70.06

RGB-PC

 

 

1280x768

47.776

59.870

1360x768

47.712

60.015

1280x1024

63.981

60.020

 

1600x1200

75.00

60.00

1920x1080

66.587

59.934

 

RGB-PC

! NOTES

GTo get the best picture quality, adjust the PC graphics card to 1920x1080(For 37/42LH260H, 37LH265H), 1360x768(The others).

GDepending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.

GIn PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear.

When you use too long RGB-PC cable, there might be a noise on the screen.

GAvoid keeping a fixed image on the screen for a long period of time. The fixed image could become permanently imprinted on the screen.

GThe synchronization input form for Horizontal and Vertical frequencies is separate.

GDepending on the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

28

Loading...
+ 126 hidden pages