QUICK REFERENCE GUIDE
LED LCD TV
Please read this manual carefully before operating your set and retain it for future reference.
22LT560C 32LT560E 26LT560C 37LT560E 32LT560C 42LT560E 37LT560C 47LT560E 42LT560C
P/NO : MFL67415402 (1204-REV03) |
www.lgsolutions.com |
ENGLISH
2 LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
IMPORTANT SAFETY INSTRUCTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
yyDo not use this apparatus near water.
yyClean only with a dry cloth.
yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).
ENGLISH
ENGLISH
4 IMPORTANT SAFETY INSTRUCTIONS
yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
yyOnly use attachments/accessories specified by the manufacturer.
yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
yyUnplug this apparatus during lightning storms or when unused for long periods of time.
yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.
yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
yyCAUTION concerning the Power Cord (Can differ by country):
It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and
if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT SAFETY INSTRUCTIONS 5 |
|||||||||||||
yyWarning - To reduce the risk of fire or |
yyANTENNAS Outdoor antenna grounding |
|
||||||||||||||||||||||||
electrical shock, do not expose this product |
(Can differ by country): |
|
|
|||||||||||||||||||||||
to rain, moisture or other liquids. Do not |
If an outdoor antenna is installed, follow |
|||||||||||||||||||||||||
touch the TV with wet hands. Do not install |
the precautions below. An outdoor antenna |
|||||||||||||||||||||||||
this product near flammable objects such |
system should not be located in the vicinity |
|||||||||||||||||||||||||
as gasoline or candles, or expose the TV to |
of overhead power lines or other electric light |
|||||||||||||||||||||||||
direct air conditioning. |
or power circuits, or where it can come in |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
contact with such power lines or circuits as |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
death or serious injury can occur. Be sure the |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
antenna system is grounded so as to provide |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
some protection against voltage surges |
||||||||||||||||
yyDo not expose to dripping or splashing and |
and built-up static charges. Section 810 of |
|||||||||||||||||||||||||
do not place objects filled with liquids, such |
the National Electrical Code (NEC) in the |
|||||||||||||||||||||||||
as vases, cups, etc. on or over the apparatus |
U.S.A. provides information with respect to |
|||||||||||||||||||||||||
(e.g. on shelves above the unit). |
proper grounding of the mast and supporting |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
structure, grounding of the lead-in wire to |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
an antenna discharge unit, size of grounding |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
conductors, location of antenna discharge |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
unit, connection to grounding electrodes and |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
yyGrounding |
requirements for the grounding electrode. |
|||||||||||||||||||||||||
(Except for devices which are not grounded.) |
Antenna grounding according to the National |
|||||||||||||||||||||||||
Ensure that you connect the earth ground |
Electrical Code, ANSI/NFPA 70 |
|
|
|||||||||||||||||||||||
wire to prevent possible electric shock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
(i.e. a TV with a three-prong grounded AC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Antenna Lead in Wire |
|||||||||||
plug must be connected to a three-prong |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
grounded AC outlet). If grounding methods |
Ground Clamp |
|
|
Antenna Discharge Unit |
||||||||||||||||||||||
|
||||||||||||||||||||||||||
are not possible, have a qualified electrician |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
Electric Service |
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-20) |
|||||||||||||
install a separate circuit breaker. Do not try to |
Equipment |
|
|
|
|
|
|
|
|
|
Grounding Conductor |
|||||||||||||||
Ground Clamp |
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Section 810-21) |
|||||||||||||
ground the unit by connecting it to telephone |
|
|
|
|
|
Power Service Grounding |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
wires, lightening rods, or gas pipes. |
|
|
|
|
NEC: National Electrical Code |
Electrode System |
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(NEC Art 250, Part H) |
||||||||||||
|
|
|
|
|
|
|
|
|
Power Supply |
yyCleaning |
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
Short-circuit |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
Breaker |
|
When cleaning, unplug the power cord and |
|||||||||||||||||||
|
|
|
|
|||||||||||||||||||||||
yyDISCONNECTING DEVICE FROM THE MAIN |
||||||||||||||||||||||||||
wipe gently with a soft cloth to prevent |
||||||||||||||||||||||||||
POWER |
scratching. Do not spray water or other |
|||||||||||||||||||||||||
Mains plug is the disconnecting device. The |
liquids directly on the TV as electric shock |
|||||||||||||||||||||||||
plug must remain readily operable. |
may occur. Do not clean with chemicals |
|||||||||||||||||||||||||
yyAs long as this unit is connected to the AC |
such as alcohol, thinners or benzine. |
|||||||||||||||||||||||||
wall outlet, it is not disconnected from the |
yyMoving |
|
|
|||||||||||||||||||||||
AC power source even if the unit is turned |
Make sure the product is turned off, |
|||||||||||||||||||||||||
off. |
unplugged and all cables have been |
|||||||||||||||||||||||||
yyDo not attempt to modify this product in any |
removed. It may take 2 or more people to |
|||||||||||||||||||||||||
way without written authorization from LG |
carry larger TVs. Do not press or put stress |
|||||||||||||||||||||||||
Electronics. Unauthorized modification could |
on the front panel of the TV. |
|
|
|||||||||||||||||||||||
void the user’s authority to operate this |
yyVentilation |
|
|
|||||||||||||||||||||||
product. |
Install your TV where there is proper |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
ventilation. Do not install in a confined |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
space such as a bookcase. Do not cover the |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
product with cloth or other materials while |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
plugged. Do not install in excessively dusty |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
places. |
|
|
ENGLISH
ENGLISH
6 IMPORTANT SAFETY INSTRUCTIONS
yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.
yyDo not press strongly upon the panel with a hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.
yyKeep the product away from direct sunlight.
yyNever touch this apparatus or antenna during a thunder or lightning storm.
yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.
yyDot Defect
The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
yyTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.
yyIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
DISPOSAL (Hg lamp only used in LCD TVs)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
Preventing “Image burn” or “Burn-in” on your TV screen
yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.
For USA and Canada
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
|
|
|
|
TABLE OF CONTENTS 7 |
|
TABLE OF CONTENTS |
|
|
|
|
|
2 |
LICENSES |
18 |
REMOTE CONTROL |
||
|
|
|
|
|
|
2 |
OPEN SOURCE SOFTWARE NOTICE |
20 |
GENERAL TROUBLESHOOTING |
||
|
|
|
|
|
|
3 |
IMPORTANT SAFETY INSTRUCTIONS |
|
20 |
CAUTION for using ezsign 2.0 |
|
7 |
TABLE OF CONTENTS |
21 |
SPECIFICATIONS |
||
|
|
|
|
|
|
8 |
INSTALLATION PROCEDURE |
23 |
IR CODES |
||
|
|
|
|
|
|
8 |
ASSEMBLING AND PREPARING |
|
24 |
EXTERNAL CONTROL DEVICE SETUP |
|
8 |
Unpacking |
24 |
RS-232C Setup |
||
10 |
Optional Extras (For LT560E series) |
24 |
Type of connector; |
||
11 |
Parts and buttons |
|
|
D-Sub 9-Pin Male |
|
12 |
Setting up the TV |
25 |
RS-232C configurations |
||
12 |
- Attaching the stand |
26 |
Communication Parameters |
||
14 |
- Mounting on a table |
26 |
Command reference list |
||
15 - Mounting on a wall |
27 |
Transmission / Receiving protocol |
|||
|
|
|
|
||
17 |
- Tidying cables |
|
|
|
|
17 - External speaker out |
|
|
|
|
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
ENGLISH
ENGLISH
8 ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yyTo ensure safety and product life span, do not use any unapproved items.
yyAny damages or injuries sustained due to use of unapproved items are not covered by the warranty. yyIn the case of some models, the thin film on the screen is a part of TV and should not be removed.
NOTE
yyThe items supplied with your product will vary depending on the model.
yyProduct specifications and/or manual contents subject to change without prior notice due to upgrade of product functions.
ASSEMBLING AND PREPARING 9
For LT560C series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick Reference Guide |
|
Power Cord |
||
Remote control, |
|
|
||||||||||
Batteries (AAA) |
|
|
|
|
|
|
||||||
(See p.18) |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
(For 32/37/42LT560C) |
|
(For 22LT560C) |
|
(For 26LT560C) |
Stand body/Stand base |
|
Stand body/Stand base |
|
Stand body/Stand base |
(See p.12) |
|
(See p.13) |
|
(See p.13) |
|
|
|
|
|
(For 32/37/42LT560C) |
|
(For 22LT560C) |
|
(For 26LT560C) |
ENGLISH
Stand Screws |
|
Stand Screws |
|
Stand Screws |
8 EA, M4 x 14 |
|
4 EA, M4 x 12 |
|
8 EA, M4 x 12 |
(See p.12) |
|
2EA, M4 x 16 |
|
(See p.13) |
|
|
(See p.13) |
|
|
|
|
|
|
|
(For 32/37/42LT560C) |
|
|
|
(For 32/37/42LT560C) |
Desk-mount Screw |
|
Cable holder |
|
Power Cord holder |
1 EA, M4 x 20 |
|
(See p.17) |
|
(See p.17) |
(See p.14) |
|
|
|
|
|
|
|
|
|
(For 22/26LT560C) |
|
(For 32/37/42LT560C) |
|
|
AC/DC Adapter |
|
Protection cover |
|
|
|
10 ASSEMBLING AND PREPARING
For LT560E series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick Reference Guide |
|
EzSign 2.0 Editor CD |
|
Power Cord |
||
Remote control, |
|
|
|
|||||||||||
Batteries (AAA) |
|
|
|
|
|
|
|
|
||||||
(See p.18) |
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stand body/Stand base |
Stand Screws |
Desk-mount Screw |
Protection cover |
(See p.12) |
8 EA, M4 x 14 |
1 EA, M4 x 20 |
|
|
(See p.12) |
(See p.14) |
|
ENGLISH
Power Cord holder |
|
Cable holder |
(See p.17) |
|
(See p.17) |
|
|
|
Optional Extras (For LT560E series)
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items.
These devices only work with certain models.
AN-WF100
Wireless LAN for Broadband/
DLNA Adaptor
ASSEMBLING AND PREPARING 11
Parts and buttons
Remote control
Power indicator
Side Connection panel
USB |
IN |
input |
USB |
HDMI |
IN 3 |
|
|
input |
|
Screen |
Buttons |
|
|
|
(For 22/26LT560C) |
Buttons (For 32/37/42LT560C,
32/37/42/47LT560E)
Speakers
(For 22/26LT560C) DC IN
EXTERNAL
SPEAKER OUT
RGB IN (PC)
RS-232C IN
(CONTROL&SERVICE)
/ DVI IN
1 |
2 |
OAV IN |
|
|
|
|
VIDE |
|
|
|
|
L/MONO |
L |
|
|
|
- |
|
|
RJP |
|
-AUDIO |
R |
ANTENNA/ |
||
INTERFACE |
||||
CABLE IN |
||||
R |
|
|
|
|
AUDIO IN |
|
|
||
(RGB/DVI) |
|
|
Rear Connection panel
(For 32/37/42LT560C, 32/37/42/47LT560E)
ENGLISH
|
Button |
Description |
|
|
|
^ |
v |
Scrolls through the saved channels. |
+ |
- |
Adjusts the volume level. |
|
|
|
|
|
Turns the power on or off. |
|
|
|
CAUTION
yyDo not insert LAN cable in the RJP INTERFACE.