3828TUO032A-199.5.311:34PM˘ ` i
Edition 1
This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein, these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or programs(s) at any time.
It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country.
Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer.
No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation.
References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any of IBM’s intellectual property rights or other legally protectable rights may be used instead of the IBM product, program, or service. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by IBM, are the user’s responsibility.
IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents
Trademarks
The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States or other countries:
ENERGY STAR is a U.S. registered mark.
© Copyright International Business Machines Corporation 1999 All rights reserved.
i
3828TUO032A-199.5.311:34PM˘ ` ii
Packing List
The product package should include the following items:
1.Monitor
2.Owner’s Manual
3.Power Cord
4.Swivel Base
5.Diskette
ii
3828TUO032A-199.5.311:34PM˘ ` iii
Table of Contents
Precautions
Workplace preparation |
.............................................................................A1 |
Working Practices .................................................................................... |
A2 |
Tilt/Swivel Base
Installation |
................................................................................................A4 |
Installation
Connections |
.............................................................................................A5 |
Location and Function of Controls
Front View................................................................................................ |
A6 |
Rear View ................................................................................................ |
A6 |
Image Control Panel ................................................................................ |
A7 |
Power Management System, MPR II and DDC |
|
Power Management System.................................................................... |
A9 |
Low Radiation Compliance (MPR II)........................................................ |
A9 |
DDC (Display Data Channel) ................................................................... |
A9 |
General Operation.................................................................................. |
A10 |
Video Memory Modes |
|
Factory Preset Timing Signal Chart ....................................................... |
A11 |
Troubleshooting ..................................................................................... |
A12 |
Further help ............................................................................................. |
A13 |
Service ...................................................................................................... |
A14 |
Specifications.......................................................................................... |
A15 |
Compliances............................................................................................ |
A17 |
Warranty.................................................................................... |
See back of manual |
iii
3828TUO032A-199.5.311:34PM˘ ` A1
Precautions
Danger
To avoid shock hazard:
•Do not remove the covers.
•Do not operate this product unless the stand is attached.
•Do not connect or disconnect this product during an electrical storm.
•The power cord plug must be connected to a properly wired and grounded power outlet.
•Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.
•To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.
Handling:
• Your color monitor is heavy, so handle it with care.
Workplace preparation
Positioning the Monitor
Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 2 inches (50mm) ventilation space around the monitor.
Height
The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation.
Orientation
Choose a position that gives the least reflection from lights and windows, usually at a right angle to any windows. The monitor should be positioned directly in front of you so that you do not have to twist your body. Tilt the monitor to a comfortable viewing angle.
A1
3828TUO032A-199.5.311:34PM˘ ` A2
Precautions
Working Practices
Rest
Take regular breaks. Vary your posture, and stand up and stretch occasionally as prolonged use of computer workstations can be tiring.
Back
You should sit back in the chair and use the back rest.
Hands
Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad.
Eyesight
Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.
A2
3828TUO032A-199.5.311:34PM˘ ` A3
Precautions
Power Source:
1.Make sure the power cord is the correct type that required in your area.
2.This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. )
3.Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet. The power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your monitor.
Power cord:
For safe operation, use the power cord supplied with the unit.
Notes
•Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
A3
3828TUO032A-199.5.311:34PM˘ ` A4
Tilt/Swivel Base
Turn Off the equipment and all attached options.
Carefully set the monitor face-down with the underside facing you.
Installation
1.Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor.
2.Insert the hooks into slots.
3.Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
A4
3828TUO032A-199.5.311:34PM˘ ` A5
Installation
The supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display.
Connections
To connect your monitor after the video adapter is properly installed:
1.Turn OFF the power to your computer and all its attached options.
2.Position the monitor and the computer so that you can easily get to the back panel of each.
3.Connect the signal cable with D-sub connector to the graphics board on your PC as described in your PC Owner's Manual.
4.Tighten the screws on the video cable connectors to keep them from coming loose and to prevent radio and TV interference.
5.Connect the power cord to the AC receptacle on the back of the monitor. Plug the other end of the power cord into a properly grounded electrical outlet.
6.The socket-outlet should be installed near the equipment and should be easily accessible.
A5
Loading...