Land Pride AT2672, AT2684, AT2584, AT3590, AT2660 User Manual

Name: Land Pride AT2672
Brand: Land Pride
SKU: 790557
Rating: 4 (1 reviews)

4 (1)

Table of Contents Part Number Index

Air Tunnel Grooming Mower

AT2560, AT2572, (AT2584 See AT2684), AT2660,

AT2672, AT2684 & AT3590

310-002P

14326	Parts Manual
14326
	Read the Operator's manual entirely. When
	you see this symbol, the subsequent
	instructions and warnings are serious - follow
	without exception. Your life and the lives of
	others depend on it!
	© Copyright 2008 Printed 07/23/08

Cover photo may show optional equipment not supplied with standard unit.

Table of Contents Part Number Index

Table of Contents

Section 1: Introduction.................................................	6
Using This Manual...............................................................	6
Manual Replacement Information.......................................	6
Manual Revisions................................................................	6
Touch-up Paint....................................................................	6
Hardware Legend................................................................	7
Replacement Hardware......................................................	7
Serial Numbers...................................................................	7
Part Number Service Coding..............................................	7
AT25 SERIES
Section 2: Decks............................................................	8
Deck (S/N 59101-)..............................................................	8
Deck (S/N 59102+)............................................................	10
Deck (S/N 59102+)............................................................	12
Front Roller........................................................................	14
Gauge Wheel....................................................................	16
Gauge Wheel Tire (814-071C)..........................................	18
Guards..............................................................................	20
Hitch..................................................................................	22
Section 3: Drive...........................................................	24
Belt Drive (S/N 212180-)...................................................	24
Belt Drive (S/N 212181+)..................................................	28
Left and Right Spindle Hub Assembly (S/N 212180-).......	32
Spindle Hub Assembly (S/N 212180-)..............................	34
Section 3: Gauge Wheel..............................................	36
Gauge Wheel (814-271C).................................................	36
Gauge Wheels..................................................................	38
Section 4: Drive...........................................................	40
Belt Drive...........................................................................	40
Belt Take-Up......................................................................	44
Section 4: Gearboxes..................................................	46
Gearbox (826-081C) (826-011C) Comer..........................	46
Gearbox (826-081C) IEG..................................................	48
Gearbox (826-203C) OMNI...............................................	50
Gearbox (826-293C) OMNI...............................................	52
Gearbox (826-325C) Comer.............................................	54
Section 5: Drivelines...................................................	56
Driveline (826-012C) Eurocardan (S/N 199605-)..............	56
Driveline (826-012C) Eurocardan (S/N 199606+).............	58
Driveline (826-012C) Walterscheid....................................	60
Driveline (826-064C) Eurocardan.....................................	62
Driveline Heavy Duty (826-064C) Walterscheid................	64
Section 5: Gearboxes..................................................	66
Gearbox (826-296C) OMNI...............................................	66
Gearbox (826-311C) AT2684) OMNI.................................	68
Gearbox (826-326C) Comer AT2660, AT2672 & AT2684...	70
Section 6: Drivelines...................................................	72
Driveline (826-297C) Eurocardan.....................................	72

Section 6: Labels.........................................................	74
Label Placement...............................................................	74
Section 7: Labels.........................................................	76
Label Placement AT26......................................................	76
Section 7: Options.......................................................	78
Front Anti-Scalping Roller.................................................	78
AT26 SERIES
Section 2: Decks..........................................................	80
Front Roller........................................................................	80
Guards..............................................................................	82
Hitch..................................................................................	84
Section 3: Gauge Wheel..............................................	86
Gauge Wheel (814-071C).................................................	86
Gauge Wheel (814-144C) & (814-191C)...........................	88
Gauge Wheel (814-271C).................................................	90
Gauge Wheel Tire (814-188C)..........................................	92
Gauge Wheels..................................................................	94
Section 4: Drive...........................................................	96
Belt Drive...........................................................................	96
Belt Take-Up....................................................................	100
Section 5: Gearboxes................................................	102
Gearbox (826-296C) OMNI.............................................	102
Gearbox (826-311C) AT2684) OMNI...............................	104
Gearbox (826-326C) Comer AT2660, AT2672 & AT2684.106
Section 6: Drivelines.................................................	108
Driveline (826-064C) Eurocardan...................................	108
Driveline (826-297C) EC (S/N 246675 to 426011)..........	110
Driveline (826-297C) EC (S/N 426012+).........................	112
Section 7: Labels.......................................................	114
Label Placement AT26....................................................	114
AT35 SERIES
Section 2: Decks........................................................	116
Deck................................................................................	116
Gauge Wheel..................................................................	118
Gauge Wheel Tire (814-114C), (814-070C),(814-193C) &
(814-272C)................................................................	120
Section 3: Drive.........................................................	122
Belt Drive (S/N 209357-).................................................	122
Belt Drive (S/N 209358+)................................................	126
Center Blade Hub (S/N 212180-)....................................	130
Right Hand and Left Hand Blade Hub (S/N 212180-).....	132
Section 4: Gearboxes................................................	134
Gearbox (826-055C) Comer...........................................	134
Gearbox (826-206C) OMNI.............................................	136
Gearbox (826-296C) OMNI.............................................	138
Gearbox (826-326C) Comer...........................................	140

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only.

Land Pride is registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Table of Contents Part Number Index

Table of Contents (continued)

Section 5: Drivelines.............................................	142
Driveline (826-057C) Walterscheid (Option)...............	142
Driveline (826-080C) Walterscheid (S/N 209357- & S/N
236470+)..............................................................	144
Driveline (826-195C) EC New Shields (S/N 209358 to
236469)................................................................	146
Driveline (826-195C) EC Old Shields (S/N 209358 to
236469)................................................................	148
Driveline Slip Clutch (317189) Walterscheid..............	150
Section 6: Labels...................................................	152
Label Placement........................................................	152
Section 7: Options................................................	154
Front Anti-Scalping Roller..........................................	154
Part Number Index................................................	156

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Table of Contents Part Number Index

Alphabetized Table of Contents

AT25 SERIES
B
Belt Drive...........................................................................	40
Belt Drive (S/N 212180-)...................................................	24
Belt Drive (S/N 212181+)..................................................	28
Belt Take-Up......................................................................	44
D
Deck (S/N 59101-)..............................................................	8
Deck (S/N 59102+)............................................................	10
Deck (S/N 59102+)............................................................	12
Driveline (826-012C) Eurocardan (S/N 199605-)..............	56
Driveline (826-012C) Eurocardan (S/N 199606+).............	58
Driveline (826-012C) Walterscheid....................................	60
Driveline (826-064C) Eurocardan.....................................	62
Driveline (826-297C) Eurocardan.....................................	72
Driveline Heavy Duty (826-064C) Walterscheid................	64
F
Front Anti-Scalping Roller.................................................	78
Front Roller........................................................................	14
G
Gauge Wheel....................................................................	16
Gauge Wheel (814-271C).................................................	36
Gauge Wheel Tire (814-071C)..........................................	18
Gauge Wheels..................................................................	38
Gearbox (826-081C) (826-011C) Comer..........................	46
Gearbox (826-081C) IEG..................................................	48
Gearbox (826-203C) OMNI...............................................	50
Gearbox (826-293C) OMNI...............................................	52
Gearbox (826-296C) OMNI...............................................	66
Gearbox (826-311C) AT2684) OMNI.................................	68
Gearbox (826-325C) Comer.............................................	54
Gearbox (826-326C) Comer AT2660, AT2672 & AT2684...	70
Guards..............................................................................	20
H
Hitch..................................................................................	22
L
Label Placement...............................................................	74
Label Placement AT26......................................................	76
Left and Right Spindle Hub Assembly (S/N 212180-).......	32
S
Spindle Hub Assembly (S/N 212180-)..............................	34
AT26 SERIES
B
Belt Drive...........................................................................	96
Belt Take-Up....................................................................	100

Driveline (826-064C) Eurocardan...................................	108
Driveline (826-297C) EC (S/N 246675 to 426011)..........	110
Driveline (826-297C) EC (S/N 426012+).........................	112

Front Roller........................................................................

Gauge Wheel (814-071C).................................................	86
Gauge Wheel (814-144C) & (814-191C)...........................	88
Gauge Wheel (814-271C).................................................	90
Gauge Wheel Tire (814-188C)..........................................	92
Gauge Wheels..................................................................	94
Gearbox (826-296C) OMNI.............................................	102
Gearbox (826-311C) AT2684) OMNI...............................	104
Gearbox (826-326C) Comer AT2660, AT2672 & AT2684.106
Guards..............................................................................	82

Hitch..................................................................................

Label Placement AT26....................................................	114
AT35 SERIES
B
Belt Drive (S/N 209357-).................................................	122
Belt Drive (S/N 209358+)................................................	126
C
Center Blade Hub (S/N 212180-)....................................	130
D
Deck................................................................................	116
Driveline (826-057C) Walterscheid (Option)....................	142
Driveline (826-080C) Walterscheid (S/N 209357- & S/N
236470+)..................................................................	144
Driveline (826-195C) EC New Shields (S/N 209358 to
236469).....................................................................	146
Driveline (826-195C) EC Old Shields (S/N 209358 to
236469).....................................................................	148
Driveline Slip Clutch (317189) Walterscheid...................	150
F
Front Anti-Scalping Roller...............................................	154
G
Gauge Wheel..................................................................	118
Gauge Wheel Tire (814-114C), (814-070C),(814-193C) &
(814-272C)................................................................	120
Gearbox (826-055C) Comer...........................................	134
Gearbox (826-206C) OMNI.............................................	136
Gearbox (826-296C) OMNI.............................................	138
Gearbox (826-326C) Comer...........................................	140

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Table of Contents Part Number Index

Alphabetized Table of Contents (continued)

Label Placement........................................................

152

Right Hand and Left Hand Blade Hub (S/N 212180-).132

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Table of Contents Part Number Index

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Land Pride AT2672, AT2684, AT2584, AT3590, AT2660 User Manual

Table of Contents Part Number Index

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Deck (S/N 59101-)

Section 2: Decks

Applies to AT2560, AT2572

10827

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Deck (S/N 59101-)

Land Pride

AT25 SERIES

Applies to AT2560, AT2572

Ref. Part No.

Part Description

Comments

Revision

dwg10827 Drawing Image Number

1.310-067H 60 WT MOWER FRAME

1.310-028H 72 WT MOWER FRAME

2.310-019H LOWER HITCH WELDMENT

2. 310-212H

LOWER HITCH WELDMENT 16 1/8

Optional

3.310-020S LOWER HITCH PIN

4.805-141C PIN CLEVIS 5/8 X 2 1/2 PLT

5.805-140C PIN CLEVIS 3/4 X 2 1/2 PLT

6.805-143C PIN HAIR COTTER .120 PLT

7.805-015C PIN LYNCH 5/16 X 1 3/4

8. 310-068D

UPPER HITCH

9.310-067D UPPER HITCH BRACE

10.310-015D PIVOTING HITCH - UPPER

11.310-012D SPACER - TOP HITCH

12.802-242C HHCS 5/8-18X5 1/2 GR5

13.804-022C WASHER LOCK SPRING 5/8 PLT

14.803-022C NUT HEX 5/8-18 PLT

15.802-246C HHCS 5/8-18X1 3/4 GR5

16.	310-105D	RH BELT GUARD
17.	310-106D	LH BELT GUARD

18.310-070H CENTER COVER 60 WT

18.310-042H 72 WT CENTER BELT COVER

19.816-072C BELT GUARD PIN CAP

20.804-007C WASHER FLAT 1/4 SAE PLT

21.	802-241C	WING 1/4-20X3/4
22.	800-013C	1/4-20 X 1 U TYPE FASTENER	Rev. 2
22.	800-006C	RPBY 800-013C	Rev 1; Use up stock

23.802-004C HHCS 1/4-20X3/4 GR5

24.803-007C NUT LOCK 1/4-20 PLT

25.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

26.310-185D DISCHARGE CHUTE 60

26.310-123D 72 WT DISCHARGE CHUTE

27. 801-041C SCREW THUMB 1/4-20 X 1/2 LG

28.802-224C HHCS 1/4-20X1 1/4 GR5

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Deck (S/N 59102+)

Section 2: Decks

Applies to AT2560

14161

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Land Pride

AT25 SERIES

Deck (S/N 59102+)

Applies to AT2560

Ref. Part No.

Part Description

Comments

Revision

dwg14161 Drawing Image Number

1.310-067H 60 WT MOWER FRAME

2.310-019H LOWER HITCH WELDMENT

2. 310-212H

LOWER HITCH WELDMENT 16 1/8

Optional

3.310-020S LOWER HITCH PIN

4.805-140C PIN CLEVIS 3/4 X 2 1/2 PLT

5.805-143C PIN HAIR COTTER .120 PLT

6.805-015C PIN LYNCH 5/16 X 1 3/4

7. 310-068D

UPPER HITCH

8.310-067D UPPER HITCH BRACE

9.310-015D PIVOTING HITCH - UPPER

10.310-012D SPACER - TOP HITCH

11.802-242C HHCS 5/8-18X5 1/2 GR5

12.804-022C WASHER LOCK SPRING 5/8 PLT

13.803-022C NUT HEX 5/8-18 PLT

14.802-246C HHCS 5/8-18X1 3/4 GR5

15.	310-437D	AT2560 RH BELT COVER	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
15.	310-315D	AT2560 & 72 RH BELT GUARD	(S/N 239291-)	Rev. 1
16.	310-438D	AT2560 LH BELT COVER	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
16.	310-316D	AT2560 & 72 LH BELT GUARD	(S/N 239291-)	Rev. 1
17.	310-241H	AT2560 CENTER BELT COVER WLDMT	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
17.	310-142H	AT2560 & 72 CENTER BELT GUARD	(S/N 239291-)	Rev. 1
18.	817-192C	KNOB 3 PRONG 1/4-20 X 1/2 LG	(S/N 143133+)	Rev. 2 not compat. w/Rev. 1
18.	800-114C	WING HEAD SCREW W/WEAR WASHER	(S/N 59102<->143132)	Rev. 1
19.	800-163C	CLIP U-TYPE NUT 1/4-20 SLF-RET	(S/N 143133+)	Rev. 2 not compat. w/Rev. 1
19.	800-115C	CLIP, U-TYPE NUT	(S/N 59102<->143132)	Rev. 1

20.804-007C WASHER FLAT 1/4 SAE PLT

21.802-004C HHCS 1/4-20X3/4 GR5

22.803-007C NUT LOCK 1/4-20 PLT

23.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

24.310-185D DISCHARGE CHUTE

25.	801-041C	SCREW THUMB 1/4-20 X 1/2 LG
26.	800-116C	NYLON PUSH-ON RETAINER	(S/N 59102<->143132)
27.	816-298C	RUBBER PLUG 1 3/8 W/CROSS SLIT	(S/N 239292+)
28.	800-320C	DRIVELINE HOOK HANGER W/HRDWR	(S/N 317416+)

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Deck (S/N 59102+)

Section 2: Decks

Applies to AT2572

14162

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Land Pride

AT25 SERIES

Deck (S/N 59102+)

Applies to AT2572

Ref. Part No.

Part Description

Comments

Revision

dwg14162 Drawing Image Number

1.310-028H 72 WT MOWER FRAME

2.310-019H LOWER HITCH WELDMENT

2. 310-212H

LOWER HITCH WELDMENT 16 1/8

Optional

3.310-020S LOWER HITCH PIN

4.805-140C PIN CLEVIS 3/4 X 2 1/2 PLT

5.805-143C PIN HAIR COTTER .120 PLT

6.805-015C PIN LYNCH 5/16 X 1 3/4

7. 310-068D

UPPER HITCH

8.310-067D UPPER HITCH BRACE

9.310-015D PIVOTING HITCH - UPPER

10.310-012D SPACER - TOP HITCH

11.802-242C HHCS 5/8-18X5 1/2 GR5

12.804-022C WASHER LOCK SPRING 5/8 PLT

13.803-022C NUT HEX 5/8-18 PLT

14.802-246C HHCS 5/8-18X1 3/4 GR5

15.	310-442D	AT2572 RH BELT COVER	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
15.	310-315D	AT2560 & 72 RH BELT GUARD	(S/N 239291-)	Rev. 1
16.	310-443D	AT2572 LH BELT COVER	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
16.	310-316D	AT2560 & 72 LH BELT GUARD	(S/N 239291-)	Rev. 1
17.	310-243H	AT2572 CENTER BELT COVER WLDMT	(S/N 239292+)	Rev. 2 not compat. w/Rev. 1
17.	310-142H	AT2560 & 72 CENTER BELT GUARD	(S/N 239291-)	Rev. 1
18.	817-192C	KNOB 3 PRONG 1/4-20 X 1/2 LG	(S/N 143133+)	Rev. 2 not compat. w/Rev. 1
18.	800-114C	WING HEAD SCREW W/WEAR WASHER	(S/N 59102<->143132)	Rev. 1
19.	800-163C	CLIP U-TYPE NUT 1/4-20 SLF-RET	(S/N 143133+)	Rev. 2 not compat. w/Rev. 1
19.	800-115C	CLIP, U-TYPE NUT	(S/N 59102<->143132)	Rev. 1

20.804-007C WASHER FLAT 1/4 SAE PLT

21.802-004C HHCS 1/4-20X3/4 GR5

22.803-007C NUT LOCK 1/4-20 PLT

23.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

24.310-123D 72 WT DISCHARGE CHUTE

25.	801-041C	SCREW THUMB 1/4-20 X 1/2 LG
26.	310-332D	LH BELT GUARD BRACKET	(S/N 72226+)
27.	310-333D	RH BELT GUARD BRACKET	(S/N 72226+)
28.	802-078C	HHCS 1/4-20X5/8 GR5	(S/N 72226+)
29.	804-006C	WASHER LOCK SPRING 1/4 PLT	(S/N 72226+)
30.	800-116C	NYLON PUSH-ON RETAINER	(S/N 59102<->143132)
31.	816-298C	RUBBER PLUG 1 3/8 W/CROSS SLIT	(S/N 239292+)
32.	800-320C	DRIVELINE HOOK HANGER W/HRDWR	(S/N 317416+)

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Front Roller

Section 2: Decks

Applies to AT2584

18882

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Land Pride

AT25 SERIES

Front Roller

Applies to AT2584

Ref. Part No.

Part Description

Comments

Revision

dwg18882 Drawing Image Number

310-317S FRONT ROLLER AT2660-72-84

1.802-015C RHSNB 3/8-16X1 GR5

2.803-025C NUT HEX 3/4-10 PLT NYLOCK

3. 310-266H WLDMT. ROLLER SHAFT

4.310-551D FRONT ROLLER BRACKET LH.

5.817-049C 4 X 10 ROLLER WHEEL

6.310-550D FRONT ROLLER BRACKET RH.

7.804-025C WASHER FLAT 3/4 SAE PLT

8.805-016C PIN COTTER 3/16 X 1 1/4 PLT

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Gauge Wheel

Section 2: Decks

Applies to AT2560, AT2572

10606

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Gauge Wheel

Land Pride

AT25 SERIES

Applies to AT2560, AT2572

Ref. Part No.

Part Description

Comments

Revision

dwg10606 Drawing Image Number

1.310-014H GAUGE WHEEL ARM WELDMENT

2.817-048C SPINDLE BUSHING

3.800-001C GREASE ZERK STRAIGHT 1/4-28

4.310-064S GAUGE WHEEL ARM SUB

5.	805-126C	PIN LYNCH 1/4 X 1 3/4 PLT	(S/N 264391+)	Rev. 2
5.	805-065C	PIN WIRE RETAINING 1/4 X 1 3/4	(S/N 264390-)	Rev 1; Use up stock
6.	827-002C	SPACER 1"
7.	827-001C	SPACER 1/2"
8.	310-149H	GAUGE WHEEL YOKE(5 1/8 INSIDE)	(S/N 159155+) Measure	Rev. 2 not compat. w/Rev. 1
8.	310-003H	GAUGE WHEEL YOKE(4 1/4 INSIDE)	(S/N 159154-) Measure	Rev. 1
9.	803-018C	NUT HEX 1/2-20 PLT	S/N 511276-
10.	804-015C	WASHER LOCK SPRING 1/2 PLT	S/N 511276-

11.310-024D GAUGE WHEEL SPACER - SHORT

11.	310-329D	GAUGE WHEEL SPACER(SOLID TIRE)
12.	310-328D	SPACER TUBE GA. WHL. 5 1/8 LG	(S/N 159155+)	Rev. 2 not compat. w/Rev. 1
12.	310-025D	SPACER TUBE - GW TIRE	(S/N 159154-)	Rev. 1
13.	802-350C	HHCS 1/2-20X6 1/2 GR5	(S/N 159155+)	Rev. 2 not compat. w/Rev. 1
13.	802-243C	HHCS 1/2-20X5 1/2 GR5	(S/N 159154-)	Rev. 1
14.	814-071C	TIRE 10 X 4 TUBELESS AIR		Rev. 2
14.	310-104V	RPBY 814-071C		Rev 1; Use up stock
15.	814-188C	TIRE 10X3.25 SOLID STRT RIB CR	(S/N 260900+)	Rev. 3
15.	814-146C	RPBY 814-188C	(S/N 260899-)	Rev 2; Use up stock
15.	814-057C	SOLID TIRE WHEEL 10 1/4X3 1/4		Rev 1; Use up stock
16.	890-189C	BUSHING 3/4 I.D. 1 3/8 X 1 LG	Dimensional check before ordering
16.	87010	HS BUSH 3/4"IDX1 1/8"ODX 5/8LG	Dimensional check before ordering
16.	87040	HS BRG 3/4ID X 1.407OD X 5/8LG	Fits 814-146C item #15 only
17.	800-100C	ZERK STAKED
18.	310-017S	GAUGE WHEEL & YOKE SUB	Solid tire
18.	310-105S	4X10 AIR TIRE & YOKE ASSY	Air Tire
19.	802-099C	HHCS 1/2-13X3 1/4 GR5	AT2560 & AT2572 (S/N 254752+)	Rev. 2 not compat. w/Rev. 1
19.	802-245C	HHCS 3/8-24X3 GR 5	AT2560 & AT2572 (S/N 254751-)	Rev. 1
20.	804-174C	WASHER 1 1/2 OD X 17/32 ID PLT	AT2560 & AT2572 (S/N 254752+)	Rev. 3 not compat. w/Rev. 2
20.	804-080C	WASHER 1 1/2 OD X 13/32 ID PLT	AT2560 & AT2572 (S/N 254751-)	Rev. 2
20.	310-310D	RPBY 804-080C		Rev 1; Use up stock
21.	804-015C	WASHER LOCK SPRING 1/2 PLT	AT2560 & AT2572 (S/N 254752+)	Rev. 2 not compat. w/Rev. 1
21.	804-013C	WASHER LOCK SPRING 3/8 PLT	AT2560 & AT2572 (S/N 254751-)	Rev. 1
22.	803-020C	NUT HEX 1/2-13 PLT	AT2560 & AT2572 (S/N 254752+)	Rev. 2 not compat. w/Rev. 1
22.	803-146C	NUT HEX 3/8-24 PLT	AT2560 & AT2572 (S/N 254751-)	Rev. 1
23.	87410	HS CGD RLR BRG.75IDX1.37X1.5LG
24.	802-308C	NUT HEX FLG/LK 1/2-20 PLT.GR.G	S/N 511277+

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride Table of Contents Part Number Index

AT25 SERIES

Gauge Wheel Tire (814-071C)

Section 2: Decks

Applies to AT2560, AT2572

13629

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Gauge Wheel Tire (814-071C)

Land Pride

AT25 SERIES

Applies to AT2560, AT2572
Ref. Part No.		Part Description	Comments	Revision
	dwg13629	Drawing Image Number
1.	814-071C	TIRE 10 X 4 TUBELESS AIR
2.	53-182	TILDEN BRG 3/4IDX1 3/8ODX3 1/4
3.	53-164	TILDEN RTNR 3/4IDX1 3/8ODX1/4L
4.	53-189	TILDEN BRG 3/4ID1.34ODX15/16L

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Guards

Section 2: Decks

Applies to AT2584

18883

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Land Pride

AT25 SERIES

Guards

Applies to AT2584
Ref. Part No.	Part Description	Comments	Revision
dwg18883	Drawing Image Number
1. 817-358C	KNOB 3/8-16 MALE THD 2 3/8OD

2.816-298C RUBBER PLUG 1 3/8 W/CROSS SLIT

3.	817-428C	PLASTIC BELT GUARD RH. AT2660
3.	817-436C	PLASTIC BELT GUARD RH. AT2672
3.	817-408C	PLASTIC BELT GUARD RH. AT2584
4.	817-429C	PLASTIC BELT GUARD LH. AT2660
4.	817-437C	PLASTIC BELT GUARD LH. AT2672
4.	817-409C	PLASTIC BELT GUARD LH. AT2584
5.	817-427C	RUBBER DISCHARGE DEFLECTOR	AT2660 & AT2672
5.	817-412C	RUBBER DISCHARGE DEFLECTOR	AT2684 (Shown)

6.802-149C RHSNB 3/8-16X3/4 GR5

7.	310-578D	TOP PLATE HINGE SUPPORT	AT2660 & AT2672
7.	310-563D	TOP PLATE HINGE SUPPORT	AT2684 (Shown)
8.	310-579D	HINGE SUPPORT	AT2660 & AT2672
8.	310-562D	HINGE SUPPORT	AT2684 (Shown)

9.803-263C NUT HEX FLANGE LOCK 5/8-11

10.	803-198C	NUT HEX WHIZ 3/8-16 PLT
11.	802-692C	RHSNB 5/8-11X7 1/2 PLT	AT2660 & AT2672
11.	802-688C	RHSNB 5/8-11X10 GR5 PLT	AT2684 (Shown)
12.	807-189C	SPRING TORSION

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride	Table of Contents Part Number Index
AT25 SERIES
Hitch

Section 2: Decks

Applies to AT2584

18881

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 2: Decks

Table of Contents Part Number Index

Land Pride

AT25 SERIES

Hitch

Applies to AT2584

Ref. Part No.

Part Description

Comments

Revision

dwg18881 Drawing Image Number

1.802-307C HHCS 5/8-18X5 GR5

2. 310-474D

A-FRAME

3.310-015D PIVOTING HITCH - UPPER

4.	310-583D	REAR BRACE	AT2660
4.	310-597D	REAR BRACE	AT2672
4.	310-475D	REAR BRACE	AT2584 (Shown)

5.803-263C NUT HEX FLANGE LOCK 5/8-11

6.804-022C WASHER LOCK SPRING 5/8 PLT

7.803-022C NUT HEX 5/8-18 PLT

8.310-012D SPACER - TOP HITCH

9.805-143C PIN HAIR COTTER .120 PLT

10.805-142C PIN CLEVIS 3/4 X 3 1/2 PLT

11.802-657C HFS 5/8-11 X 1 3/4 GR5/8

12.	310-321H	WLDMT. AT2660
12.	310-329H	WLDMT. AT2672
12.	310-290H	WLDMT. AT2584	(Shown)

13.805-140C PIN CLEVIS 3/4 X 2 1/2 PLT

14.310-020S LOWER HITCH PIN

15.310-019H LOWER HITCH WELDMENT

15. 310-212H

LOWER HITCH WELDMENT 16 1/8

Optional

16.805-015C PIN LYNCH 5/16 X 1 3/4

17.	800-320C	DRIVELINE HOOK HANGER W/HRDWR	(S/N 317416+)
18.	802-005C	HHCS 1/4-20X1 GR5	(S/N ______+)
19.	816-504C	MANUAL STORAGE CONTAINER	(S/N ______+)
20.	804-007C	WASHER FLAT 1/4 SAE PLT	(S/N ______+)
21.	803-255C	NUT HEX NYLOCK 1/4-20	(S/N ______+)

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride Table of Contents Part Number Index

AT25 SERIES

Belt Drive (S/N 212180-)

Section 3: Drive

Applies to AT2560, AT2572

11754

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 3: Drive

Table of Contents Part Number Index

Belt Drive (S/N 212180-)

Land Pride

AT25 SERIES

Applies to AT2560, AT2572

Ref. Part No.

Part Description

Comments

Revision

dwg11754 Drawing Image Number

1.802-237C HHCS 5/8-18X4 GR5

2.	808-074C	V-IDLER PULLEY 5 O.D.	(S/N 72225AT2572)
2.	808-128C	B-GROOVE IDLER PULLEY 6.25 OD	(S/N 72226+ AT2572)
3.	310-051D	IDLER SPACER
4.	808-073C	FLAT IDLE PULLEY 6 1/4 O.D.	(S/N 72225AT2572)
4.	808-129C	FLAT IDLER PULLEY 6 3/4 O.D.	(S/N 72226+ AT2572)
5.	310-132S	CW SPDLE HUB ASSY 5"PULL 3"TB	(S/N 72225AT2572)	Rev. 2 not compat. w/Rev. 1
5.	310-161S	CW SPDLE HUB ASSY 6"PULL 3"TB	(S/N 72226+ AT2572)	Rev. 1
5.	310-137S	CW SPDLE HUB ASSY 5"PULL 4.5TB	AT2560" mower

6.802-229C HHCS 7/16-20X1 1/2 GR8

7.	310-138S	CW SPDLE HUB ASSY 5PULL 7.4BTB	AT2560 & AT2572 (S/N 72225- )	Rev. 2 not compat. w/Rev. 1
7.	310-162S	CW SPDLE HUB ASSY 6PULL 7.4BTB	(S/N 72226+ AT2572)	Rev. 1
8.	816-063C	V-BELT B144 146.9 E.L. KEVLAR	AT2560" Mower
8.	816-064C	V-BELT B158 160.9 E.L. KEVLAR	(S/N 72225AT2572)
8.	816-141C	V-BELT B173 175.9 E.L. KEVLAR	(S/N 72226+ AT2572)
9.	890-171C	MWR BLD 1/4 X 20 29/32SD HL CW	Standard High Lift Blades 3 per 60"
			mower
9.	890-375C	MWR BLD 1/4 X 20 29/32SD ML CW	Optional Medium Lift Blades 3 per
			60" mower
9.	890-204C	MWR BLD 5/16X20 29/32SD LL CW	Optional Low Lift Blades 3 per 60"
			mower
9.	890-702C	MWR BLD MULCH 1/4X20.91SD CW	Optional Mulch Blades 3 per 60"
			Mower
9.	890-172C	MWR BLD 1/4 X 25SD HL CW	Standard High Lift Blades 3 per 72"
			mower
9.	890-318C	MWR BLD 1/4 X 25SD ML CW	Optional Medium Lift Blades 3 per
			72" mower
9.	890-200C	MWR BLD 5/16 X 25SD LL CW	Optional Low Lift Blades 3 per 72"
			mower
9.	890-698C	MWR BLD MULCH 1/4X25SD CW	Optional Mulch Blades 3 per 72"
			Mower

10.804-022C WASHER LOCK SPRING 5/8 PLT

11.803-022C NUT HEX 5/8-18 PLT

12.	803-014C	NUT HEX 3/8-16 PLT	(S/N 174815+)	Rev. 2 not compat. w/Rev. 1
12.	803-006C	NUT HEX 1/4-20 PLT	(S/N 174814-)	Rev. 1
13.	802-567C	SP EYE 3/8-16X4	(S/N 174815+)	Rev. 2 not compat. w/Rev. 1
13.	802-233C	SP EYE 1/4-20X2 3/4	(S/N 174814-)	Rev. 1

14.807-068C SPRING EXT BELT HANDLE

15.310-088H TAKE-UP HANDLE-NEW SPRING

16.817-028C DOUBLE DISK ARM PIVOT BUSHINGS

17.803-119C NUT LOCK 5/8-18 NYLOK COLLAR P

18.805-017C PIN COTTER 3/16 X 1 3/4 PLT

19. 8.2.2.01144

NUT M 24 X 2

20.8.3.2.00409 FLAT WASHER 24 X 44 X 4

21.	808-077C	B-GROOVE PULLEY 10 O.D.	AT2560" mower
21.	808-126C	B-GROOVE DRIVE PULLEY 11 O.D.	(S/N 72226+ AT2572)	Rev. 2 not compat. w/Rev. 1
21.	808-076C	B-GROOVE PULLEY 9 O.D.	(S/N 72225AT2572)	Rev. 1
22.	310-041D	GEAR BOX SPACER	(S/N 204084-)

23.310-331D KEY 1/4" X 11/16" LONG

24.817-050C GEARBOX SHAFT PROTECTOR

25.	826-203C	REP BY 826-325C	(S/N 204085+)	Rev. 3 not compat. w/Rev. 2
25.	826-081C	RPBY 826-203C	(S/N 204084-)	Rev. 2
25.	826-011C	RPBY 826-081C		Rev 1; Use up stock
26.	802-246C	HHCS 5/8-18X1 3/4 GR5	Used with 826-081C
26.	802-207C	HHCS 5/8-18X1 1/2 GR5	Used with 826-011C

27.802-239C HHCS 5/8-18X2 1/2 GR5

28.803-115C NUT HEX 7/16-20 PLT

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride

AT25 SERIES

Table of Contents Part Number Index

Section 3: Drive

Belt Drive (S/N 212180-) (continued)

Applies to AT2560, AT2572

Ref. Part No.

Part Description

Comments

Revision

29.804-014C WASHER LOCK 7/16 PLT

30.826-012C PTO SHAFT 35HP X 34 W/EXT CONE

30.	826-064C	PTO CAT. 3 X 34
31.	802-384C	HFS 1/2-20X1 1/4 GR5	Replaces 802-326C & 804-015C.	Rev. 2
31.	802-326C	HHCS 1/2-20X1 1/4 GR5	Replaced by 802-384C.	Rev 1; Use up stock
31.	804-015C	WASHER LOCK SPRING 1/2 PLT	Replaced by 802-384C.	Rev 1; Use up stock
32.	804-110C	WASHER BLADE 2ODX.56THKX.51ID		Rev. 2
32.	310-043D	RPBY 804-110C		Rev 1; Use up stock

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 3: Drive

Table of Contents Part Number Index

Belt Drive (S/N 212180-) (continued)

Land Pride

AT25 SERIES

Applies to AT2560, AT2572

This Page Intentionally Left Blank

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride Table of Contents Part Number Index

AT25 SERIES

Belt Drive (S/N 212181+)

Section 3: Drive

Applies to AT2560, AT2572

16499

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

Section 3: Drive

Table of Contents Part Number Index

Belt Drive (S/N 212181+)

Land Pride

AT25 SERIES

Applies to AT2560, AT2572

Ref. Part No.

Part Description

Comments

Revision

dwg16499 Drawing Image Number

1.802-237C HHCS 5/8-18X4 GR5

2.	808-074C	V-IDLER PULLEY 5 O.D.	(S/N 72225AT2572)
2.	808-128C	B-GROOVE IDLER PULLEY 6.25 OD	(S/N 72226+ AT2572)
3.	310-051D	IDLER SPACER
4.	808-073C	FLAT IDLE PULLEY 6 1/4 O.D.	(S/N 72225AT2572)
4.	808-129C	FLAT IDLER PULLEY 6 3/4" O.D.	(S/N 72226+ AT2572)
5.	315-375S	CW SPINDLE HUB ASSEMBLY 5"	(S/N 239291-) AT2560
5.	315-378S	CW SPINDLE HUB ASSEMBLY 6"	(S/N 239291-) AT2572

6.802-229C HHCS 7/16-20X1 1/2 GR8

7.	816-063C	V-BELT B144 146.9 E.L. KEVLAR	AT2560
7.	816-141C	V-BELT B173 175.9 E.L. KEVLAR	AT2572
8.	890-171C	MWR BLD 1/4 X 20 29/32SD HL CW	Standard High Lift Blades 3 per 60"
			mower
8.	890-375C	MWR BLD 1/4 X 20 29/32SD ML CW	Optional Medium Lift Blades 3 per
			60" mower
8.	890-204C	MWR BLD 5/16X20 29/32SD LL CW	Optional Low Lift Blades 3 per 60"
			mower
8.	890-702C	MWR BLD MULCH 1/4X20.91SD CW	Optional Mulch Blades 3 per 60"
			Mower
8.	890-172C	MWR BLD 1/4 X 25SD HL CW	Standard High Lift Blades 3 per 72"
			mower
8.	890-318C	MWR BLD 1/4 X 25SD ML CW	Optional Medium Lift Blades 3 per
			72" mower
8.	890-200C	MWR BLD 5/16 X 25SD LL CW	Optional Low Lift Blades 3 per 72"
			mower
8.	890-698C	MWR BLD MULCH 1/4X25SD CW	Optional Mulch Blades 3 per 72"
			Mower

9.804-022C WASHER LOCK SPRING 5/8 PLT

10.803-022C NUT HEX 5/8-18 PLT

11.803-014C NUT HEX 3/8-16 PLT

12. 802-567C

SP EYE 3/8-16X4

13.807-068C SPRING EXT BELT HANDLE

14.310-088H TAKE-UP HANDLE-NEW SPRING

15.817-028C DOUBLE DISK ARM PIVOT BUSHINGS

16.803-119C NUT LOCK 5/8-18 NYLOK COLLAR P

17.805-017C PIN COTTER 3/16 X 1 3/4 PLT

18. 8.2.2.01144

NUT M 24 X 2

19.8.3.2.00409 FLAT WASHER 24 X 44 X 4

20.	808-334C	B-GROOVE PULLEY 10" CAST-IRON	(S/N 359859+) AT25 60" mowers	Rev. 2
20.	808-077C	B-GROOVE PULLEY 10 O.D.	(S/N 359858-)	Rev. 1
20.	808-076C	B-GROOVE PULLEY 9 O.D.	(S/N 359858-)	Rev. 1
20.	808-335C	B-GROOVE PULLEY 11" CAST-IRON	(S/N NR +) AT2572 mowers	Rev. 2 not compat. w/Rev. 1
20.	808-126C	B-GROOVE DRIVE PULLEY 11 O.D.	(S/N NR -)	Rev. 1

21.310-041D GEAR BOX SPACER

22.310-331D KEY 1/4" X 11/16" LONG

23.	817-050C	GEARBOX SHAFT PROTECTOR	(S/N 220346-)
24.	826-325C	GBOX MOWER 50 HP 1:2.5 CW	(S/N 335075+)	Rev. 2 not compat. w/Rev. 1
24.	826-203C	RPBY 826-325C	(S/N 335074-)	Rev. 1

25.802-207C HHCS 5/8-18X1 1/2 GR5

26.802-239C HHCS 5/8-18X2 1/2 GR5

27.803-115C NUT HEX 7/16-20 PLT

28.804-014C WASHER LOCK 7/16 PLT

29.826-012C PTO SHAFT 35HP X 34 W/EXT CONE

29.	826-064C	PTO CAT. 3 X 34
30.	802-695C	HFS 1/2-20X2	GR8	(S/N 329661+)	Rev. 2 not compat. w/Rev. 1
30.	802-384C	HFS 1/2-20X1	1/4 GR5	(S/N 329660-)	Rev. 1

31.804-110C WASHER BLADE 2ODX.56THKX.51ID

07/23/08

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

Land Pride

AT25 SERIES

Table of Contents Part Number Index

Section 3: Drive

Belt Drive (S/N 212181+) (continued)

Applies to AT2560, AT2572
Ref. Part No.		Part Description	Comments	Revision
32.	990-109R	TUBE NYLON 1/4OD X 062WL	(S/N 239291-)
33.	800-193C	GREASE ZERK 1/8NPT 45-DEG	(S/N 239291-)
34.	800-157C	FTG TUBE,CONNECTOR 1/8 MNPT	(S/N 239291-)

35.803-114C NUT LOCK 3/4-16 NYLOC COLLAR

36. 172-242D

1/4 SQ. KEY X 7/8 LG

37.804-093C WASHER FLAT 3/4 HARD ASTMF436

38.	808-075C	B-GROOVE PULLEY 5 O.D.	AT2560,
38.	808-127C	B-GROOVE DRIVE PULLEY 6 O.D.	AT2572

39.822-161C BEARING 6206 W/ METAL SHIELD

40.	310-224D	BLADE HUB - MACH	(S/N 329661+)
41.	310-361D	REP BY 310-348S	(S/N 239292 <-> 329660)
42.	822-006C	BEARING 206
43.	310-300D	BLADE HUB - 7/8
44.	310-248S	CW TG SPINDLE HUB ASSY 5" PULL	(S/N 239292+)
44.	310-249S	CW TG SPINDLE HUB ASSY 6" PULL	(S/N 239292+) AT2572
45.	800-001C	GREASE ZERK STRAIGHT 1/4-28	(S/N 239292+)
46.	310-457D	BLADE HUB MACHINED TOP GREASE	(S/N 239292+)
47.	310-630D	BLADE SPINDLE SHAFT CW TG	(S/N 329661+)	Rev. 2 not compat. w/Rev. 1
47.	310-454D	RPBY 310-349S	(S/N 239292 <-> 329660)	Rev. 1

AT2560, AT2572, (AT2584 See AT2684), AT2660, AT2672, AT2684 & AT3590 Air Tunnel Grooming Mower 310-002P

07/23/08

+ 130 hidden pages