DUAL DIN SIZED CD RECEIVER
DPX701U
DPX501U
INSTRUCTION MANUAL
© B64-3402-00/01 (EW, E2W)
Contents
Safety precautions |
4 |
Notes |
5 |
About CDs |
7 |
About AAC, MP3 and WMA |
8 |
About USB device |
10 |
General features |
11 |
Power
Selecting the Source
Volume
Attenuator
System Q
Audio Control
Adjusting the detail of Audio Control
Audio Setup
Speaker Setting
Subwoofer Output
TEL Mute
Switching Display
Display Type Selection
Graphic part Display Switching
Wallpaper selecting
Text Selection for Display
Text Display Switching
Font Color Select
Tuner features |
22 |
Tuning |
|
Direct Access Tuning |
|
Station Preset Memory |
|
Auto Memory Entry |
|
Preset Tuning |
|
RDS features |
24 |
Traffic Information |
|
Radio Text Scroll |
|
PTY (Program Type)
Program Type preset
Changing Language for PTY Function
CD/USB device/Audio file/External |
|
disc control features |
27 |
Playing CD & Audio file
Playing USB device
Playing External Disc
Fast Forwarding and Reversing
Track/File Search
Disc Search/Folder Search
Direct Track/File Search
Direct Disc Search
Track/File/Disc/Folder Repeat
Scan Play
Random Play
Magazine Random Play
All Random Play
Select mode
File Select mode
Folder Select 1 mode
Folder Select 2 mode
Switching the Play mode
Letter Seek
Text/Title Scroll
2 | English
Menu system |
34 |
|
Basic Operations of remote control 46 |
|
Menu System |
|
|
Accessories/ Installation Procedure 48 |
|
Security Code |
|
|
||
|
|
|
|
|
Touch Sensor Tone |
|
|
Connecting Wires to Terminals |
49 |
Manual Clock Adjustment |
|
|
||
|
|
|
|
|
Date Adjustment |
|
|
Installing the Escutcheon |
51 |
Date Mode |
|
|
||
|
|
|
|
|
Synchronize Clock |
|
|
Installation |
52 |
Indirect Lighting |
|
|
||
|
|
|
|
|
Display Illumination Control |
|
|
Removing the Unit |
53 |
Dimmer |
|
|
||
|
|
|
|
|
Switching preout |
|
|
Troubleshooting Guide |
54 |
Built-in Amp Setting |
|
|
||
|
|
|
|
|
Dual Zone System Setting |
|
|
Specifications |
58 |
B.M.S. (Bass Management System) |
|
|
||
|
|
|
|
|
B.M.S. Frequency Offset |
|
|
|
|
AMP Control |
|
|
|
|
News Bulletin with Timeout Setting |
|
|
|
|
Local Seek |
|
|
|
|
Tuning Mode |
|
|
|
|
AF (Alternative Frequency) |
|
|
|
|
Restricting RDS Region (Region Restrict |
|
|
|
|
Function) |
|
|
|
|
Auto TP Seek |
|
|
|
|
Monaural Reception |
|
|
|
|
External Display Control |
|
|
|
|
Disc Naming (DNPS) |
|
|
|
|
Auxiliary Input Display Setting |
|
|
|
|
Selecting Russian Characters |
|
|
|
|
Text Scroll |
|
|
|
|
Built-in Auxiliary input Setting |
|
|
|
|
Power OFF Timer |
|
|
|
|
CD Read Setting |
|
|
|
|
Voice Index |
|
|
|
|
ACDrive firmware version display |
|
|
|
|
Unique ID display |
|
|
|
|
Audio Preset Memory |
|
|
|
|
Audio Preset Recall |
|
|
|
|
Demonstration mode Setting |
|
|
|
|
The "AAC" logo is trademark of Dolby
Laboratories.
English | 3
Safety precautions
2WARNING
To prevent injury or fire, take the following precautions:
•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
•Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
•Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals.
2CAUTION
To prevent damage to the machine, take the following precautions:
•Make sure to ground the unit to a negative 12V DC power supply.
•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
•When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.
•Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.
Do Not Load 3-in. CDs in the CD slot
If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.
About CD players/disc changers connected to this unit
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players.
Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. Connecting unsupported disc changers/CD players to this unit may result in damage.
Set the "O-N" Switch to the "N" position for the applicable Kenwood disc changers/ CD players. The functions you can use and the information that can be displayed may differ depending on the models being connected.
•You can damage both your unit and the CD changer if you connect them incorrectly.
Lens Fogging
When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
4 | English
Notes
•No USB device comes with this unit. You need to purchase a commercially available USB device. For the types of available USB devices, refer to <About USB device> (page 10).
•If you experience problems during installation, consult your Kenwood dealer.
•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.
•Characters that conform to ISO 8859-1 can be displayed. (DPX701U only)
•Characters that conform to ISO 8859-5 or ISO 8859-1 can be displayed. Refer to <Selecting Russian Characters> (page 41). (Russian sales area of DPX701U)
•The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; ^ - { } | ~ . (DPX501U only)
•The RDS feature won’t work where the service is not supported by any broadcasting station.
•There are places in this manual where lit indicators are described; however, the only time an indicator will light is in the following settings. When Indicator is selected as mentioned in <Text Display Switching> (page 18). (DPX701U only)
•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.
How to reset your unit
•If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
•Remove the USB device before pressing the Reset button. Pressing the Reset button with the USB device installed can damage the data contained in the USB device. For how to remove the USB device, refer to <Playing USB device> (page 28).
•Press the Reset button if the disc auto changer fails to operate correctly. Normal operation should be restored.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase characters.
Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode Setting> (page 44).
About DAB Tuner control
Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the control method of DAB Tuner function.
However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction.
<Auto Ensemble Memory Entry>
1.Select the preset band for Auto Ensemble Memory Entry.
2.Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry.
After storing in the memory finishes, the number of the pre-set buttons and the ensemble label are displayed.
<Searching by programme type and language> and <Languages to be displayed> in <Programme Type (PTY) Function>
At the operation to press [DISP] button, use [TI] button instead.
English | 5
Notes
About "Media Manager" of PC application attached to DPX701U/DPX501U
•"Media Manager" is recorded in the CD-ROM attached to this unit.
•Refer to the attached installation manual for the installation method of "Media Manager".
•Refer to the user’s manual in the installation CD-ROM and Help of "Media Manager" for the operation method of "Media Manager".
•The unit can play CD/ USB device (hereafter called "ACDrive media") created by "Media Manager".
•Refer to the following site for updated information of "Media Manager". http://www.kenwood.mediamanager.jp
•Contact Kenwood for the function and operation of the "Media Manager".
•"Media Manager" is a product of PhatNoise.
The marking of products using lasers (Except for some areas)
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. This means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.
This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment
should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
6 | English
About CDs
Handling CDs
• Do not touch the recording surface of the CD.
•CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc.
•Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
When using a new CD
If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen, etc.
Burrs
Burrs
CD accessories
Do not use disc type accessories.
CD cleaning
Clean from the center of the disc and move outward.
Removing CDs
When removing CDs from this unit, pull them out horizontally.
CDs that cannot be used
•CDs that are not round cannot be used.
•CDs with coloring on the recording surface or CDs that are dirty cannot be used.
•This unit can only play the CDs with
English | 7
About AAC, MP3 and WMA
The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following limitation. The Audio file, which is not conforming to the specification, may not play normally, or the file and folder names may not display correctly.
Playable Audio file
•AAC, MP3, WMA
•Attach the correct extension for the Audio file (AAC: ".M4A", MP3: ".MP3", WMA: ".WMA").
•Do not attach the extensions to files other than the Audio file. If the extension is attached, the file, which is not the Audio file, will play and outputs a loud noise, causing damage to the speaker.
•The files with copy protection cannot be played.
•Audio files cannot be played depending on the encoding software setting, USB device type, and/or recording conditions.
•The unit may not be compatible with upgrade of compression format standard and additional specifications.
•For details on the formats used for USB devices and restrictions, refer to http://www.kenwood. mediamanager.jp/.
Playable AAC file
•".m4a" file encoded by AAC-LC format.
Refer to http://www.kenwood.mediamanager.jp for the details.
Playable MP3 file
•MPEG 1/2 Audio Layer 3 file
•Transfer bit rate: 8-320 kbps
•Sampling frequency: 16, 22.05, 24, 32, 44.1, 48 kHz
Playable WMA file
•The file in accordance with Windows Media Audio (Except for the file for Windows Media Player 9 or after which applies the new functions)
•Transfer bit rate: 48-192 kbps
•Sampling frequency: 32, 44.1, 48 kHz
Playable Storage media
•CD-ROM, CD-R, CD-RW
•USB device
•CD-RW discs which are quick formatted by the writing software cannot be used.
•When recording to the maximum CD-R/RW media capacity at once, the writing software is set to "Disc at once".
•For details on the available USB devices, refer to <About USB device> (page 10).
Playable CD-R/RW format
•ISO 9660 Level 1/2
•Joliet
•Romeo
•Long file name.
Playable file format of USB device
•For the formats supported by USB devices, refer to http://www.kenwood.mediamanager.jp/.
The maximum number of characters for display (CD-R/RW)
File/Folder name: 128 characters
MP3 ID3 Tag/ WMA Contents property: 30 characters
AAC song information: 60 characters
•File/Folder name is the number of the characters including the extensions.
•This unit can display the following versions of MP3 ID3 tag: version 1.0/ 1.1/ 2.2/ 2.3
•AAC ID3 Tag cannot be displayed.
Limitation of structure for the file and the folder (CD-R/RW)
•Maximum number of directory levels: 8
•Maximum number of folders: 100
•Maximum number of files per folder: 4096
About partition of the USB device
•While using the USB device, virtual folders are created to control the partition in the USB device. These folders appear in the first level (root) directory as "#:". "#" is an alphabet to identify each partition.
•Even when the USB device does not have partition, "A:" folder is created, and audio files are controlled inside this folder.
8 | English
Playing order of the Audio file
•The Audio file plays in the order which is written by CD writing software. You may be able to set the playing order by writing the play sequence numbers such as "01" to "99" at the beginning of the file name.
•Audio files are played in the order the files are written. You can specify the order of playback by numbering files in a folder and writing them by folder. (USB device)
Example
CD (1) ^: Follder ¡! ¡: Audiofilefile
2
3 ¡"
¡#
4 ¡$
5 ¡%
¡P
•Playing order
Playing order after ¡! play.
¡", ¡#, ¡$, ¡%...
•File search
Forward file search during ¡" play.
Push the Control knob towards [¢] ¡#
•Folder search
Forward folder search during ¡" play.
Push the Control knob towards [FM] 4, 5...
•File select
When the selection is set to file ¡%.
Push the Control knob towards [¢]
¡%...P, %...
•Folder select 1
When the selection is set to directory 4, and you want to skip to the folder 2 at the same level.
Push the Control knob towards [4] 2
When the selection is set to directory 3, moves the level up by folder select.
Push the Control knob towards [AM] 2
•Folder select 2
When the selection is set to directory 1, and you want to skip to the folder 4.
Push the Control knob towards [¢] 3, 4...
English | 9
About USB device
Notes on Use of the USB Device
This unit can play audio files stored in the flash memory and digital audio player that have a USB port (these devices are referred to as USB devices in this document).
The following restrictions are placed on the types and usage of available USB devices:
Available USB Devices
•USB devices belonging to the USB mass storage class.
•USB devices whose maximum current consumption is 500 mA or less.
For the supported formats and USB device types, refer to http://www.kenwood.mediamanager.jp/.
•USB Mass Storage Class:
USB devices that the PC can recognize as an external storage without using any special driver or application software.
•Contact the sales agent as to whether your USB device conforms to the USB mass storage class specs.
•Using an unsupported USB device can result in abnormal playback or display of the audio file.
Even if you use the USB device conforming to the above specs, audio files cannot be played normally depending on the type or condition of the USB device.
About the Connection of the USB Device
•Do not directly connect the USB device to the USB connector on the panel. Connect it using a cable
•When connecting the USB drive, usage of the supplied USB cable is recommended.
Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.
•You cannot connect a USB device via a USB hub.
•Install the USB device in the place where it will not prevent you from driving your vehicle properly.
•Do not leave the USB device in the vehicle for a long time. It can deform or damage due to direct sunlight, high temperature, etc.
•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.
We shall have no compensation for any damage arising out of erasure of the stored data.
•Leave the cap on when not using an USB device.
About USB Device Operation
•USB device operation is the same as audio file operation unless otherwise some notice is indicated.
•USB source is recognized as CD source on the connected unit.
10 | English
General features
Power
Turning ON the Power
Press the [SRC] button.
•When the power is ON, the <Security Code> (page
35)is displayed as "CODE ON" or "CODE OFF".
Turning OFF the Power
Press the [SRC] button for at least 1 second.
Selecting the Source
Press the [SRC] button.
Source required |
Display |
Tuner |
"TUNER" |
USB device |
"USB" |
CD |
"Compact Disc"/ "CD" |
External disc (Optional accessory) |
"CD Changer"/ |
|
"CD CH" |
Auxiliary input |
"AUX" |
Auxiliary input (Optional accessory) |
"AUX EXT" |
Standby (Illumination only mode) |
"STANDBY" |
•This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle's battery.
The time until full power OFF can be set in <Power OFF Timer> (page 42).
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
English | 11
General features
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator turns ON and OFF.
When the Attenuator is ON, "ATT" is displayed.
System Q
Selecting the best sound setting preset for different types of music.
1Select the source to set
Press the [SRC] button.
2Select the Sound type
Press the [Q] button.
When you press the button once, the current sound setting is displayed.
Each time you press the button, the sound setting alternates.
Sound setting |
Display |
User memory |
"USER" |
Rock |
"ROCK" |
Pops |
"POPS" |
Easy |
"EASY" |
Top 40 |
"TOP 40" |
Jazz |
"JAZZ" |
Natural |
"NATURAL" |
•User memory: The values set on the <Audio Control> (page 12).
•Change each setting value with the <Speaker Setting> (page 14).
First, select the speaker type with the Speaker setting.
Audio Control
1Select the source to adjust
Press the [SRC] button.
2Enter Audio Control mode
Press the [VOL] knob.
3Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item |
Display |
Range |
Rear Volume *1 |
"Rear Volume"/ |
0 — 35 |
|
"R-VOL" |
|
Subwoofer level*2,3,4 |
"Sub-W Level"/ |
–15 — +15 |
|
"SW L" |
|
Bass level*5 |
"Bass Level"/ |
–8 — +8 |
|
"BAS L" |
|
Middle level*5 |
"Middle Level"/ |
–8 — +8 |
|
"MID L" |
|
Treble level*5 |
"Treble Level"/ |
–8 — +8 |
|
"TRE L" |
|
|
|
|
Balance |
"Balance"/ "BAL" Left 15 — Right 15 |
|
Fader*4 |
"Fader"/ "FAD" |
Rear 15 — Front 15 |
Exit Audio Control mode (Volume control mode)
•*1 You can control this item when "2 ZONE"/ "2ZON" of <Audio Setup> (page 14) is set to "ON".
•*2 You can control this item when <Switching preout> (page 37) is set to "SWPRE SW". (DPX501U only)
•*3 You can control this item when <Subwoofer Output> (page 15) is set to "SW ON".
•*4 You can control this item when "2 ZONE"/ "2ZON" of <Audio Setup> (page 14) is set to "OFF".
•*5 You can adjust these items in detail. Refer to <Adjusting the detail of Audio Control>(Page13).
•*5 Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included)
5Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [ATT] button.
12 | English
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the Bass level, Middle level, and Treble level in detail.
1Select the Basic Audio item
Select the desired item to be set in detail from followings;
•Bass level
•Middle level
•Treble level
For how to select Basic Audio items, see <Audio Control> (page 12).
2Enter Detail adjustment mode of Audio Control
Press the [VOL] knob for at least 1 second.
3Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item |
Display |
Range |
Bass Center Frequency |
"Bass FRQ"/ |
40/50/60/70/80/100/ |
|
"BAS F" |
120/150 Hz |
Bass Q Factor |
"Bass QFactor"/1.00/1.25/1.50/2.00 |
|
|
"BAS Q" |
|
Bass Extend |
"Bass EXT"/ |
OFF/ON |
|
"B EX" |
|
Middle level |
|
|
Adjustment Item |
Display |
Range |
Middle Center Frequency |
"Middle FRQ"/ 0.5/1.0/1.5/2.0 kHz |
|
|
"MID F" |
|
Middle Q Factor |
"Middle |
1.00/2.00 |
|
QFactor"/ |
|
|
"MID Q" |
|
Treble level |
|
|
Adjustment Item |
Display |
Range |
Treble Center Frequency |
"Treble FRQ"/ |
10.0/12.5/15.0/17.5 kHz |
|
"TRE" |
|
5Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
•When you set the Bass Extend to ON, low frequency response is extended by 20%.
•You can exit the Audio Control mode at anytime by pressing any button except for [VOL] and [ATT] buttons.
English | 13
General features
Audio Setup
Setting the Sound system, such as Cross over Network.
1Select the source to adjust
Press the [SRC] button.
2Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3Select the Audio Setup item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.
4Setup the Audio item
Turn the [VOL] knob.
Adjustment Item |
Display |
Range |
Front High Pass Filter*2 |
"HPF-F Fc"/ |
Through/40/60/80/100/120/ |
|
"HPF" |
150/180/220 Hz |
Rear High Pass Filter*2 |
"HPF-R Fc"/ |
Through/40/60/80/100/120/ |
|
"HPR" |
150/180/220 Hz |
Low Pass Filter*1,2 |
"LPF-SW"/ |
50/60/80/100/120/ |
|
"LPF" |
Through Hz |
Subwoofer Phase*1,2,3 |
"SW Phase"/ |
Reverse (180°)/ Normal (0°) |
|
"PHAS" |
|
Volume offset |
"Vol-Offset"/ |
–8 — ±0 |
|
"V-OFF" |
|
Loudness |
"LOUD" |
OFF/ON |
Dual Zone System |
"2 ZONE"/ |
OFF/ON |
|
"2ZON" |
|
• Volume offset: Sets each source’s volume as a difference from the basic volume.
• Loudness: Compensates for low and high tones during low volume.
•*1 You can control this item when <Switching preout> (page 37) is set to "SWPRE SW". (DPX501U only)
•*1 You can control this item when <Subwoofer Output> (page 15) is set to "SW ON".
•*2 You can control this item when "2 ZONE"/ "2ZON" of <Audio Setup> (page 14) is set to "OFF".
•*3 You can control this item when Low Pass Filter is not set to Through.
•Dual Zone System
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
-Set up the channel of sub source by <Dual Zone System Setting> (page 37).
-Select Main source by [SRC] button.
-Adjust the volume of Front channel by [VOL] knob.
-Adjust the volume of Rear channel by <Audio Control> (page 12).
-The Audio Control has no effect on sub source.
•You can use the Dual Zone System with the internal auxiliary input.
5Exit Audio Setup mode
Press the [VOL] knob for at least 1 second.
Speaker Setting
Fine-tuning so that the System Q value is optimal when setting the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL"/ "SP" is displayed.
3Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates between the settings shown in the table below.
Speaker type |
Display |
|
OFF |
|
"OFF"/ "SP OFF" |
For 5 |
& 4 in. speaker |
"5/4 inch"/ "SP 5/4" |
For 6 |
& 6x9 in. speaker |
"6x9/6 inch"/ "SP 6*9/6" |
For the OEM speaker |
"O.E.M."/ "SP OEM" |
4Exit Speaker Setting mode
Press the [VOL] knob.
14 | English
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward [AM] for at least 2 seconds.
Each time you push the knob, Subwoofer output switches ON and OFF.
When it is ON, "SW ON" is displayed.
•You can control this function when <Switching preout> (page 37) is set to "SWPRE SW". (DPX501U only)
•You can control this function when "2 ZONE" of <Audio Setup> (page 14) is set to "OFF".
TEL Mute
The audio system automatically mutes when a call comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system comes back ON.
•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 49).
English | 15
General features
Function of the DPX501U
Switching Display
Changing the information displayed.
Press the [DISP] button.
Each time the button is pressed, the display switches as shown below.
In Tuner source
|
Information |
Display |
|
Program Service name or Frequency |
"FREQ/PS" |
|
(FM) |
|
|
Radio text, Program Service name or |
"R-TEXT" |
|
Frequency (FM) |
|
|
Frequency (MW, LW) |
"FREQ" |
|
Clock |
"CLOCK" |
In CD & External disc source |
||
|
|
|
|
Information |
Display |
|
Disc title |
"D-TITLE"* |
|
Track title |
"T-TITLE"* |
|
Track number & Play time |
"P-TIME" |
|
Clock |
"CLOCK" |
In Audio file source |
|
|
|
|
|
|
Information |
Display |
|
Song title & Artist name |
"TITLE"* |
|
Album name & Artist name |
"ALBUM"* |
|
Folder name |
"FOLDER " |
|
File name |
"FILE " |
|
Track number & Play time |
"P-TIME" |
|
Clock |
"CLOCK" |
In Standby/ Auxiliary input source
Information |
Display |
Source name |
"SRC NAME" |
Clock |
"CLOCK" |
•* If the contents of the information cannot be displayed, Play time or Frequency is displayed.
•Track number at Audio file displays the last 3 digits when it exceeds 1000 songs.
•When you select the clock display, the display setting of each source will be changed to the clock display.
16 | English
Function of the DPX701U
Display Type Selection
Changing the display mode.
Press the [DISP] button.
Each time you press the button, the display mode alternates between the display modes shown in the table below.
Display Mode |
Display |
|
|
|
|
||
Display Type A |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Display Type B |
1 |
|
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
Display Type C |
|
|
|
|
|
|
|
|
|
3 |
|
|
4 |
|
|
|
|
|
|
|
|
||
|
|
3 |
|
|
5 |
|
|
|
|
|
|
|
|
||
|
|
3 |
|
|
6 |
|
|
Display Type D |
|
|
|
|
4 |
|
7 |
|
|
|
|
|
||
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
6 |
|
|
|
|
|
|
|
|
1 Graphic display part |
|
|
|
|
2Text display part |
|
|
|
|
3Text icon display part |
|
|
|
|
4 Upper text display part |
|
|
|
|
5 Middle text display part |
|
|
|
|
6 Lower text display part |
|
|
|
|
7 Source icon display part |
|
|
|
•The indicator is displayed when the display type is set to Display Type C or Display Type D.
•To change the information by the Display Type, refer to the page on the following table for the methods to alternate by the Display Type.
Display Type |
A |
B |
C |
D |
Graphic 1 |
17 |
17 |
— |
— |
Text 2 |
— |
18 |
— |
— |
Upper 4 |
— |
— |
19 |
19 |
Middle 5 |
— |
— |
20 |
20 |
Lower 6 |
— |
— |
20 |
20 |
Switching between graphic display part and text display part when in Display Type B mode.
Press the [DISP] button.
Function of the DPX701U Display Type A/ Display Type B
Graphic part Display Switching
Changing the graphic Display.
1Select the display Type
Press the [DISP] button.
Select the Display Type A/ Display Type B.
2Enter graphic display select mode
Press the [DISP] button for at least 1 second. Display Type A : Press the [DISP] button for at least 1 second.
Display Type B : After pressing the [DISP] button for more than 1 second to text selection mode. Press the [DISP] button again.
3Select the graphic part display
Push the Control knob towards [4] or [¢].
Each time you push the knob, the graphic display alternates between the displays shown in the table below.
Graphic display
Movie 1 Movie 2 Wallpaper
4Exit graphic display select mode
Press the [DISP] button.
•The setting of this function is available while Display Type A/ Display Type B is selected for the Display mode.
Function of the DPX701U
Display Type A/ Display Type B
Wallpaper selecting
Selecting a wallpaper to display when Display Type is set to Display Type A/ Display Type B.
1Select the wallpaper display
Refer to <Graphic part Display Switching> (page 17).
2Select the wallpaper
Display the wallpapers one after another
Press the Control knob.
Each time you press the button, the Wallpaper scan is turned ON and OFF.
When scan is ON, "SCAN" is displayed.
When scan is ON, each wallpaper is displayed every several seconds.
Select wallpaper manually
1Turn the wallpaper scan OFF.
Press the Control knob.
Each time you press the button, the Wallpaper scan is turned ON and OFF.
2Select the wallpaper.
Push the Control knob towards [FM] or [AM].
Each time you push the knob, the Wallpaper changes.
3Exit Display Control mode
Press the [DISP] button.
English | 17
General features
Function of the DPX701U
Display Type B
Text Selection for Display
Selecting the text display.
1Select the display Type
Press the [DISP] button.
Select the Display Type B.
2Enter text select mode
Press the [DISP] button for at least 1 second.
3Select the text
Push the Control knob towards [4] or [¢].
In Tuner source
|
Information |
Display |
|
Program Service name (FM) |
"Frequency/PS"* |
|
Radio text or Program Service name (FM) "Radio Text"* |
|
|
Frequency (MW, LW) |
"Frequency" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In CD & External disc source |
||
|
|
|
|
Information |
Display |
|
Disc title |
"Disc Title"* |
|
Track title |
"Track Title"* |
|
Track number & Play time |
"P-Time" |
|
Disc name |
"DNPS" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In Audio file source |
|
|
|
|
|
|
Information |
Display |
|
Song title & Artist name |
"Title/Artist"* |
|
Album name & Artist name |
"Album/Artist"* |
|
Folder name |
"Folder Name" |
|
File name |
"File Name" |
|
Play time & File number |
"P-Time" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In Standby/ Auxiliary input source |
||
|
|
|
|
Information |
Display |
|
Source name |
"Source Name" |
|
Clock |
"Clock" |
|
Date |
"Date" |
4Exit text select mode
Press the [DISP] button for at least 1 second.
•* If the contents of the information cannot be displayed, Play time or Frequency is displayed.
•When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed.
•Track number at Audio file displays the last 3 digits when the track number exceeds 1000 songs.
Function of the DPX701U
Display Type C/ Display Type D
Text Display Switching
Changing the text display.
1Select the display Type
Press the [DISP] button.
Select the Display Type C/Display Type D.
2Enter text select mode
Press the [DISP] button for at least 1 second.
3Select the text display part
Push the Control knob towards [FM] or [AM].
The cursor ( ) moves to the selected text display part.
Select the text
Push the Control knob towards [4] or [¢].
Refer to the table described later for setting items.
4Exit text select mode
Press the [DISP] button.
•Same information cannot be displayed in Upper text display part, Middle text display part and Lower text display part. However, the blank display is able to have multiple selections.
•Track number at Audio file displays the last 3 digits when the track number exceeds 1000 songs.
•When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed.
18 | English
The text display in the Upper text display part
In Tuner source
|
Information |
Display |
|
Program Service name (FM) |
"Frequency/PS"* |
|
Radio text or Program Service name (FM) |
"Radio Text"* |
|
Frequency (MW, LW) |
"Frequency" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In CD & External disc source |
|
|
|
|
|
|
Information |
Display |
|
Disc title |
"Disc Title"* |
|
Track title |
"Track Title"* |
|
Track number & Play time |
"P-Time" |
|
Disc name |
"DNPS" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In Audio file source |
|
|
|
|
|
|
Information |
Display |
|
Song title & Artist name |
"Title/Artist"* |
|
Album name & Artist name |
"Album/Artist"* |
|
Folder name |
"Folder Name" |
|
File name |
"File Name" |
|
Play time & File number |
"P-Time" |
|
Clock |
"Clock" |
|
Date |
"Date" |
In Standby/ Auxiliary input source |
||
|
|
|
|
Information |
Display |
|
Source name |
"Source Name" |
|
Clock |
"Clock" |
|
Date |
"Date" |
•* If the contents of the information cannot be displayed, Play time or Frequency is displayed.
English | 19