Kenmore 11634613305, 11634613304, 11634613301, 11634613300, 11634612305 Owner’s Manual

...

0 (0)

Owner'sManual

ManualDelPropietario

VacuumCleaner

Aspiradora

Model, Modelo

CAUTION:

Read and follow all

safety and operating

instructions before first

use of this product.

116.30612

116.31412

116.31512 116,31612

116.31612A

116.31613 116,32612 116,32613

116.33612

116.33613

116.34612

116.34613

CUIDADO:

Lea y sigue todaslas instrucciones de operacion

y seguridad antes del uso de

este producto.

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.sears.com

Printed in Mexico

Part No. C_1ZBEP90UO(3-8191538 Impreso en Mexico

Before UsingYour New Vacuum ........ 2 KenmoreVacuum Cleaner Warranty .... 2

ImportantSafety Instructions ........... 3

Parts and Features ................... 4

Assembly Instructions ............... 5-6

Operating Instructions................. 6

Pile HeightSelection and Setting ........ 7

Carpet/Bare FloorSelector ............ 7

Releasing the Handle ................. 8

ON/OFF Switch ..................... 8

Attachments ..................... 8-10

AttachmentUse Chart ............... 10

VacuumingTips .................... 11

PerformanceFeatures ............. 11-12

Please read this guide. It will help you assemble and operate your new Kenmore vacuum in the safest and most effective way.

For more information about vacuum cleaner care and operation, call your nearest Sears store. You will need the complete model and serial numbers when requesting information. Your vacu-

um's model and serial numbers are located on the Model and Serial Number Plate.

Vacuum Cleaner Care ............... 13

vacuum Storage ................... 13

Cleaning Exteriorand Attachments ..... 13

Dust Bag Changing ................. 14

FilterChanging .................... 15 Belt Changing and AgitatorCleaning .. 16-18

Clog Removal ..................... 19

LightBulb Changing ................. 20

AgitatorServicing ................... 21

AgitatorAssembly .................. 21

Troubleshooting ..................... 22

RequestingAssistance

Or Service ................... BackPage

Use the space below to record the model number and serial number of your new Kenmore

vacuum. \.

Model No.

Serial No.

Date of Purchase

Keep this book and your sales check (receipt) in a safe place for future reference.

LIMITED ONE YEAR WARRANTY ON KENMORE VACUUM CLEANER

This warranty is for one year from the date of purchase, and includes only private household vacuum cleaner use. During the warranty year, when this vacuum cleaner is operated and

maintained according to the owner's manual instructions, Sears will repair any defects in material or workmanship free of charge.

This warranty excludes vacuum bags, belts, light bulbs, and filters, which are expendable parts and become worn during normal use.

Forwarranty service, return this vacuum cleaner tothe nearest Sears Service Center inthe UnitedStates.

This warranty applies only while this product is in use in the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Seam, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179

Your safety Is importantto us.To reducethe riskoffire, electricalshock, Injury to

personsor damage when usingyourvacuum cleaner, follow basicsafety precautions

including the following:

Read this manual before assembling or

using your vacuum cleaner. Use your cleaner only as described in

this manual. Use only with Sears recom-

mended attachments.

To reduce the risk of electrical shock -

Do not use outdoors or on wet surfaces. Disconnect electrical supply before any

servicing or cleaning. Failure to do so could result in electrical shock or per- sonal injury.

Always turn cleaner off before unplug- ging.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug.

If cleaner is not working as it should,

has been dropped, damaged, left out- doors, or dropped into water, return it to

a Sears Service Center. Do not pull or carry by cord, use cord as

a handle, close door on cord, or pull cord around sharp edges or corners. Do net run cleaner over cord. Keep cord

away from heated surfaces. Do not leave cleaner when plugged in.

Unplug from outlet when not in use and before servicing.

Do not allow to be used as a toy. Close attention is necessary when used by or

near children. Do not handle plug or cleaner with wet

hands. Do not put any objects into openings.

Do not use with any opening blocked; keep free of dust, lint, hair and anything

that may reduce air flow. Keep hair, loose clothing, fingers, and

all parts of body away from openings and moving parts.

Do not use cleaner without dust bag and/or filters in place.

Always change the dust bag after vacu- uming carpet cleaners or freshener, powders and fine dust. These products clog the bag, reduce airflow and can cause the bag to burst. Faiture to

change bag could cause permanent damage to the cleaner.

Do not use the cleaner to pick up sharp hard objects, small toys, pins, paper

clips, etc. They may damage the clean- er or dust bag.

DO not pick up anything that is burning or smoking, such as cigarettes, match-

es, or hot ashes. DO not use cleaner to pick up flammable

or combustible liquids (gasoline, clean- ing fluids, perfumes, etc.), or use in areas where they may be present. The

fumes from these substances can cre-

ate a fire hazard or explosion. Use extra care when cleaning on stairs.

Do not put on chairs, tables, etc. Keep

on floor. You are responsible for making sure

that your vacuum cleaner is not used by anyone unable to operate it properly.

SAVE THESE INSTRUCTIONS

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your

cleaner is intended only for household use. Read this Owner's Manual carefully for important use and safety information. This guide contains safety statements under warning and caution symbols. Please pay special attention to these boxes and follow

any instructions given. WARNING statements alert you to such dangers as fire, elec- trical shock, burns and personal injury. CAUTION statements alert you to such dan-

gers as personal injury and/or property damage.

It is important to know your vacuum cleaner's parts and features to assure its proper and safe use. Review these before using your cleaner.

Item Part No. Part No.

In U.S. In Canada

Dust Bag 20-50690 20-50690C Headlight Bulb 20-5240 20-40600 Belt 20-5275 20-40096 Exhaust Filter 20-86889 20-86889C

Motor Safety Filter 20-86884 20-86884C

Bag Cover

Exhaust Filter Cover

Release

Quick Release

Exhaust Filter

Power

Height

Lever Lower Cord Hooks

Carry Han

Crevice Tool

Telescoping

Swivel Hose

Headlight

Switch

Performance Indicator (Some Models)

Floor Selector

Nozzle

Cover

Latch

Base

(Underneath) Spare Belt (Underneath Nozzle Cover, Behind Height Adjust Assembly)

Dusting

Combination Brush

Handle Release

Pedal

Model/Serial Numbers

Stretch Hose

Motor Protector

Agitator (Underneath)

EXTENSION HOSE KITS

SOME MODELS

Extension Hose

[lUIUUIHIIlllIIII

_-t--- Adaptor

_FI SOME MODELS"

oor Brush Wand

! WARNING

ElectricalShock Hazard Do not plug intothe electricalsupply

untilthe assembly iscomplete. Failure

to do so could resultin electrical shock or injury.

Before assembling vacuum, check the PACKING LIST on the cover of the separate

Repair Parts List. Use this list to verify that you have received all the components of your new Kenmore vacuum.

Remove the tape located below the dust

cover/filter cover on the motor case.

Tape

Position the handle as shown in the illustra- tion below.

Slide the handle into the opening at the top of the vacuum.

Handle

Screw

Hole

Attach stretch hose

end to noz- zle as

shown.

HANDLE ASSEMBLY

Screw

Remove the screw located just below the

top edge of the back of the vacuum.

Insert the screw so it passes through the handle into the vacuum.

Begin to tighten the screw with your fingers. It may be necessary to adjust the handle

slightly.

Using a screw-

driver,

tighten

the

screw.

Do not overtighten. Overtightening could stdp the screw

holes. Do not operate the cleaner without

the screw in place.

Lock the cord into place by

forcing it into the

locking notch on

the body of the

quick release upper cord hook

as shown. This helps keep the

power cord out

from under the

vacuum cleaner agitator.

Wrap the power cord around the upper and lower cord hooks and lock the power cord plug onto the power cord.

Quick Releas Upper Cord

Hook

Power

Cord

CORD ASSEMBLY

Make sure the quick release upper cord hook is in the upright position. Remove the wire tie from the power cord.

HOW TO START

Quick Release

er Cord

2. Release the power cord plug from the power cord and pull the cord off the quick

release upper cord hook. Check to be sure the power cord is still locked into the

lock in the quick release upper cord hook.

3. Check to see if the cleaner has bag installed. See DUST BAG CHANGING.

NOTE: To reduce the risk of electric

shock, this vacuum cleaner has a polar-

ized plug, one blade is wider than the

other.

1. Turn the

quick release

upper cord hook to

either side and down to

release the power cord.

Power Cord

Cord

This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified technician to install

the proper outlet. Do not change the plug in any way.

4. Plug the polarized power cord into a 120 Volt outlet located near the floor.

• WARNING

Personal Injury and Product Damage Hazard

• DO NOT plug in if switch is in the ON position. Personal injury or damage could

result.

• DO NOT use outlets above counters. Damage to items in surrounding area

could occur.

To select a pile height setting:

Turn off cleaner. Select a pile height set- ting by tilting the cleaner back until front wheels are lifted slightly off the floor as

illustrated. Slide the adjustment lever to the correct

setting.

SUGGESTED PILE HEIGHT SE'I-FINGS

You may need to raise the height to make some jobs easier, such as scatter rugs

and longer pile carpets. Suggested set- tings are:

HIGH: shag carpet, long pile, plush, scat-

ter rugs.

MED: medium to long pile. LOW: short to medium pile. EX LOW: very low pile.

SOME MODELS

Bare floor setting: Slide the carpet/bare floor selector all the way back and down

toward the bottom of the nozzle until it locks into place.

In this position the brush assembly does not revolve. This setting should be used for cleaning hardwood and tile floors and

when any attachments (tools) are used. Carpet setting: Slide the selector all the

way forward and up to the carpet position.

In this position the brush assembly will

turn. When carpets are being cleaned the

selector should be in this position.

Attention: Refer to your carpet manufac- turers cleaning recommendations. Some

more delicate carpets may require that

they be vacuumed with the agitator turned off, to prevent carpet damage.

WARNING

Personal Injury Hazard DO NOT place hands or feet

underneath the unit when chang- ing from the bare floor to the car-

pet pile height setting. The agitator begins to revolve rapidly when the

vacuum is tumed on and Is In the

carpet setting.

CAUTION

Do not allow vacuum cleaner to remain in one spot for any length of

time when the agitator is turning.

Damage to carpet may occur.

NOTE: For longer belt life, turn vacuum

off before moving selector, otherwise make sure the selector is pushed fully and

quickly as possible to the desired position. Failure to do so can cause the belt to rub

on the selector shaft and may result in the belt becoming hot and creating a burning

rubber smell.

Carpet/Bare Floor Selector

To Carpet

Position

To Bare Floor

Position

Release the handle by pressing down on the handle release pedal with your foot and pulling back and down on the handle

with your hand.

HANDLE MOUNTED

SOME MODELS

To start the vacuum cleaner, slide the

On/Off switch from the OFF position to the ON position. To stop the vacuum

cleaner, slide the On/Off switch to the

OFF position.

iL,

Crevice Tool

Telescoping Wanq

Dusting

Combination

- Stretch

Hose

Collar

Identify each of the attachments shown above.

TO USE ATTACHMENTS

Place the carpet/bare floor selector in the bare floor setting by rotating the selector back and down to the bare floor setting.

See CARPET/BARE FLOOR SELECTOR section.

When returning the bare floor selector to the carpet setting, use caution as the selector can move quickly to that setting

due to tension created by the belt.

Remove the lower end of the stretch hose

from the cleaner by grasping the hose collar, twisting and pulling straight out.

The attachments can now be added to the hose.

NOTE: The motor protector may open when using attachments or when cleaning

new carpet, due to reduced airflow by the attachments themselves or by new carpet

fuzz filling the bag quickly. See the TROUBLESHOOTING section.

WARNING

Electrical Shock And Personal Injury Hazard

Disconnect electrical supplybefore

servicing or cleaning the unit.Failure to do so could resultin eloctrical

shock or personal injuryfrom cleaner suddenly starting.

The attached hose swivels to

make cleaning easier in every

direction. Remove the hose from the

hose clip by pulling straight

out.

TELESCOPING WAND WITH

SUCTION CONTROL SLIDE

SOME MODELS

Crevice Remove the

Toot telescoping

wand from

,Telescoping its storage

Wand position.

To achieve maximum reach with the attachments, add the

crevice tool to the end of the wand by Suction

inserting and Control twisting slightly.

Wand

Crevice

Tool

When using the dusting brush

or the combina- tion brush, they

may be attached direct-

ly to the wand or placed on

the end of the crevice tool.

Slide--_

Remove the crevice tool from its storage

position in the wand. Turn the locking ring to the UNLOCK position.

Extend the wand to its full length. Turn the locking ring to the LOCK position. Attach the extension wand onto the open end of the

hose.

Suction

Wand _ _. Control Slide

Upper

Wand

Align the tabs on the extension wand with the "J" slots in the hose. Push the wand into

the hose and twist to the right to lock.

TO OPERATE SUCTION

CONTROL SLIDE

Telescoping Wand

When using attachments Suction

for cleaning Control draperies, small rugs

with low pile and other

delicate items, twist the suction control slide to the open position.

This lever is located on the telescoping wand, close to the hose.

This will reduce suction for ease of cleaning.

NOTE: Return suction control slide to the closed position for normal cleaning.

Slide

CAUTION

Whenusingattachments,becarefulnot_o overextendbhes_ch hosewhenreaching.

T_ng toreach_ thehosestretch capabililycouldcauselhe clearerto _p ova-.

Makesurethe ca,'l:mM:m_floorselectorisin

the barefloorposition.Damagetolhefloor surfacemayoccurif thecaipet_ is

used.

TO STORE A'I-I'ACHMENTS

Remove dusting brush or combination brush. Snap into appropriate storage location.

Remove crevice tool from the wand by twist- ing. Lay aside.

Remove the extension wand from the hose,

Twist the wand to the left and pull from the

hose end.

EXTENSION HOSE

SOME MODELS

Some models include an extra hose which connects to the stretch hose on the vacuum

for a longer cleaning reach.

Unit Hose _ Extension Hose

ower

Wand

Unlock

Locking

Ring

Upper

Wand

Unlock the wand by turning the wand lock- ing ring to the UNLOCK position.

Slide the lower wand into the upper wand. Turn the wand locking ring to the LOCK

position.

Place the crevice tool down into the com- pressed wand. Snap into the appropriate

storage location. Reinsert the hose fully into the opening on

the lower body from _hich it was removed. Press firmly to assure connection

Insert the two tabs on the end of the extension hose into the two "J" shaped slots

on the unit hose and twist to connect. All attachments and the telescoping wand

can be attached to the open end of the hose.

FLOOR BRUSH AND WAND

SOME MODELS

Some models have an extra brush and wand for cleaning bare floors. Twist one end of the

adaptor into the floor brush and the other end into the straight wand. Connect the

straight wand to the telescopic wand and then to the vacuum hose or extension hose.

Floor Brush -_'-_L_

wandJ

DO NOT pull the vacuum cleaner around the room by the hose. Property

damage could result.

A'I-FACHMENT

DUSTING BRUSH <_ CREVICE TOOL

COMBINATION BRUSH

Handi-Mate_ Jr.

"Always clean attachments before using on fabrics.

Furniture*

X X

Between

Cushions*

When usingthe regular hose or with the extension hose attached,the cleaner shouldbe on a solid surface

on the same level or below the levelof the user'sfeet. DO NOT usathe hoses

when the cleaner is above the level of the user'sfeet.

CLEANING AREA

Drapes*

X X

Stairs

Walls

Carpet edges.

Guide either side or the front of the noz-

zle along a baseboard. The full length

brushes help remove dirt at carpet edges.

Stairs.

Put handle in full upright position. Place

the carpet/bare floor selector in the bare

floor position. Use the crevice tool or fab-

ric brush. Set the On/Off switch to ON.

WARNING

Personal Injury Hazard Use care if vacuum cleaner is placed

on stairs. If it falls, personal injury or

property damage could result.

For best cleaning results, keep the

airflow passage clear.

Occasionally, check each of the

areas indicated for clogs.

Unplug the cleaner from the outlet

before checking.

MOTOR PROTECTION

SYSTEM

This vacuum has a motor protector by-

pass valve which automatically opens to

provide cooling air to the motor when a clog prevents the normal flow of air to the

motor. If the by-pass valve opens to

prevent motor overheating and possible damage to the vacuum, you will notice a

change of sound as air rushes

through the valve opening.

NOTE: Do not block motor protector

To correct problem: See the

TROUBLE-

SHOOTING

chart.

NOTE: The motor protector may open

when using attachments or when cleaning

new carpet, due to reduced airflow by the attachments themselves or by new carpet fuzz filling the bag quickly. See the

TROUBLESHOOTING section.

Motor Protector

PERFORMANCE INDICATOR

SOME MODELS

When the unit is running with normal air flow, the light on the performance indicator

is off. The light comes on whenever the airflow becomes blocked. If that occurs, check the disposable dust bag, motor

safety filter and other possible clog locations shown in CLOG REMOVAL.

To correct

problem: See the

TROUBLE-

SHOOTING

chart.

NOTE: The light may

also come on" when using

attachments, due to reduced airflow

through the

attachment.

DIRT SENSOR

SOME MODELS

The electronic dirt sensor is a feature which will detect particles as they pass

through the vacuum cleaner. The dirt sensor indicator is located on the

front of the switch cover. The red light indicates dirt is being picked

up by the cleaner.

OPERATION

As you vacuum, the red indicator light will come on and stay on as long as the sensor detects a high concentration of

particles passing through the cleaner. No light indicates that most of the

cleaning is complete.

Switch

I Cover

ElectricalShock And Personal Injury

Hazard Disconnect electricalsupply before

servicing or cleaning the unit. Failure

to do so could resultin electrical

shock or personal injuryfrom cleaner suddenly starting.

TO CLEAN DIRT SENSOR OPTICS

The dirt sensor optics consist of two optic cells located inside the bag holder.

Occasionally, it may become necessary to

clean the two optic cells to assure

maximum performance. It is recommended the optic cells be cleaned:

•When the red light stays on continuously.

•When dirt or dust adheres to the optic cells.

•Whenever the dust bag is changed.

To clean the sensor, wipe the optic cells with a soft, dry cloth. Never use cleaners or liquids as they can help speed the

recoating of the optic cells and make it

necessary to clean them much sooner than normal. The dirt sensor area can be

reached by removing the dust cover and the dust bag.

Optical Cell,. Holder

Always follow all safety precautions when cleaning and servicing the vacuum

cleaner.

Gather the cord and wrap it loosely around the upper and lower cord hooks.

! WARNING

Electdcal Shock And Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure

to do so could resultin aiectdcai shock or personal injuryfrom clean-

er suddenly starting.

! WARNING

Store the cleaner in a dry, indoor

area, on the floor

with the handle

locked in the upright

position.

Unplug cord from wall outlet. DO NOT drip water on cleaner.

Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid deter- gent and water, then wrung dry. Wipe dry after

cleaning. To reduce static electricity and dust build-up,

wipe outer surface of cleaner and attachments. Wash attachments in warm soapy water, rinse

and air dry. Do not ctean in _.

Electrical Shock And Personal Injury Hazard

Wrapping the cord too tightly puts stress on the cord and can cause

cord damage. A damaged cord is an electrical shock hazard and

could cause personal injuryor damage.

Do not use attachments if they are wet. Attachments used in dirty areas, such as under a rafdgerator, should

not be used on other surfaces until

they are washed. They could leave

marks.

TO REMOVE DUST BAG

! WARNING

Always unplug power cord from elec- trical outlet before performing any

service on vacuum.

Pull out on the bag cover

release located near the top of

the bag cover.

Bag Cover _J

TO REPLACE DUST BAG

Unfold the

new dust bag. Dust Fold the safety

seal tab on the _[_._ .=F--_...._ safety new dust bag '/'__.t Tab

away from the

fits on the bag

opening that _-'_/

holder.

NOTE: See PARTS AND FEATURES for Bag number.

Bag

Insert the dust bag onto the bag holder

completely by holding the bag collar.

Bag

Grasp the dust bag collar and pull gen- \.

tly, carefully remov-

ing the dust bag.

Throw away the

used dust bag.

Do not reuse.

• BagHelder Check the bag

- Meter

Safety TROUBLE-

Filter SHOOTING.

Pull the bag cover forward

and lift up.

Remove and

lay aside.

/Dust

Bag

holder and the motor safety ill-

ter• If either is blocked, check

Tuck the bag

behind each of the four bag

retention corner flaps shown here.

Be sure the bot-

tom and sides of

the dust bag are

completely within bag cavity prior to

replacing the bag

COVer.

Close the bag cover.

Place the dust bag cellar into position.

Bag

Retention

Corner Flaps

Position the bag cover so its

positioning tabs

fit into the body

positioning tab

slots.

! CAUTION

NEVER REUSE A DUST BAG. Very fine materials, such as carpet fresh-

ener, face powder, fine dust, plaster, soot, etc. can clog the bag and

cause it to burst before it is full. Change bag more often when vacu-

uming these materials.

You will hear a

distinct snap

when cover _s

securely closed.

Check to see that the dust bag is fully enclosed in the bag cover.

+ 30 hidden pages