K8000G Manual 11/30/01 5:06 PM Page 1
Model K 8000 G Part No. 1.187-106.0
High Pressure Washer Operator Manual
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . .3 Operating Instructions . . . . . . . . . . . . . . . . . . . . . . .4-5 Using the Accessories . . . . . . . . . . . . . . . . . . . . . . . .5 Working with Detergents . . . . . . . . . . . . . . . . . . . . . . .6 Shut Down and Clean-Up . . . . . . . . . . . . . . . . . . . . . .7 Taking a Break . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Winterizing and Long-Term Storage . . . . . . . . . . . . . .7 Cleaning Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9 Optional Cleaning Accessories . . . . . . . . . . . . . . . . . .9 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Specifications
Operating pressure |
3000 PSI |
|
Water volume |
2.5 |
GPM |
Engine |
7.8 |
HP Briggs & Stratton Vanguard |
K8000G Manual 11/30/01 5:06 PM Page 2
MODEL K 8000 G OVERVIEW
|
10 |
|
13 |
|
9 |
|
14 |
|
8 |
15 |
6 |
|
|
|
5 |
16
17
1
18
3
1 |
2 |
Never point nozzle at people or animals.
Never drink alcohol or use drugs while operating this equipment.
Never spray electrical connections, electrical outlets or fixtures.
Never |
add fuel with the engine running or operate where |
has been spilled. |
|
touch hot surfaces or allow accessories to contact |
surfaces. |
Never |
||
|
operate in an enclosed space, exhaust fumes are dangerous. |
|
Never |
||
|
operate near utilities with open flames. |
|
Never |
|
|
|
operate without the water turned on and never use |
water. |
Never |
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
When using this product basic precautions should always be followed:
•Read all the instructions before using the product.
•FIRE HAZARD! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead move the machine to a different location and avoid creating sparks.
•Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.
•High pressure jets can be dangerous if subject to misuse. The jet must not
be directed at persons, animals, electrical devices, or the machine itself.
•Wear safety goggles.
•Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
•The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children.
•Do not allow the high pressure hose to come into contact with the muffler guard.
•Do not leave the machine running unattended.
•Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.
•Stay alert — watch what you are doing.
•Do not operate the product when fatigued or under the influence of alcohol or drugs.
•Do not stand on unstable surfaces. Stand with both feet balanced at all times.
•The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.
Water Supply
(Cold Water Only)
•Water hose must be at least 3/4 inch in diameter.
•Flow rate of water supply must not fall below 2.5 GPM (gallons per minute).
•Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
•The water supply temperature must not exceed 104°F/40°C.
•Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
•Always prevent debris from being drawn into the unit by using a clean water source.
We strongly recommend that this high |
|
|
pressure washer not be left running for |
|
|
periods of 5 minutes or longer without |
|
|
the trigger gun being engaged. |
|
|
This Kärcher high pressure washer is |
|
|
2 |
||
equipped with thermal protection to |
||
|
||
extend the life of your pressure washer. |
|
|
The thermal protector will automatically |
|
|
activate at a predetermined high temper- |
|
|
ature ejecting hot water before resetting. |
|
|
This ensures that the pump does not |
|
|
become damaged. |
|
Caution
•Follow the maintenance instructions specified in the manual.
•This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
K8000G Manual 11/30/01 5:06 PM Page 4
ASSEMBLY INSTRUCTIONS
Step 1 Attach the handle to the frame of |
Step 2 Attach high pressure hose to |
the pressure washer. Align holes, insert bolt, |
trigger gun. |
and tighten with knob. |
|
3
4 Attach the spray wand to the
Step 5 Check oil level. Oil level should be |
Step 6 Fill gas tank with unleaded |
to the oil filler neck. Be sure the machine is |
gasoline. Do not use leaded gasoline. |
level when checking the oil level. (Refer to the |
|
engine’s operating manual for seasonal grades.) |
Important! Do not run the engine |
|
|
|
with a high or low oil level as this can |
cause engine damage. If you have further questions regarding the engine, please refer to the engine’s operating manual included with the unit.
OPERATING INSTRUCTIONS
garden hose to unit’s
4
Step 3 Connect garden |
Step 4 Trigger the gun |
Step 5 |
hose to the cold water |
to eliminate trapped air, |
Turn the engine on (I). |
source and turn water on |
wait for a steady flow of |
|
completely. |
water to emerge from the |
|
|
spray nozzle. |
|
to the fast position. Move position (only if the engine is
choke to “RUN”.