K 3.96 M
English
Please keep the original box, packaging and receipt. Before operating this unit, please read this manual thoroughly and retain it for future reference.
5.962-142.0 11/06EN
HIGH PRESSURE WASHER OPERATOR MANUAL
|
MODEL OVERVIEW |
|
3 |
|
IMPORTANT SAFETY IN- |
4-5 |
|
|
STRUCTIONS |
|
|
|
ASSEMBLY INSTRUCTIONS |
6 |
|
|
OPERATING INSTRUCTIONS |
7 |
|
|
USING THE ACCESSORIES |
8 |
|
|
WORKING WITH DETERGENTS |
9 |
|
|
TAKING A BREAK |
|
10 |
|
SHUTTING DOWN & CLEAN-UP |
10 |
|
|
WINTERIZING AND LONG- |
11 |
|
|
TERM STORAGE |
|
|
|
CARE AND MAINTENANCE IN- |
11 |
|
|
STRUCTIONS |
|
|
|
CLEANING TIPS |
|
12-13 |
|
OPTIONAL CLEANING ACCES- |
14-15 |
|
|
SORIES |
|
|
|
TROUBLESHOOTING |
|
16-17 |
|
|
|
|
|
Specifications |
|
|
|
|
|
|
|
Max. Pressure |
1750 PSI |
|
|
Water volume |
1.5 GPM |
|
|
Amp draw |
13 AMPS |
|
|
Voltage |
120 V |
|
|
Part No. |
1.636-104.0 |
|
|
Serial no. |
|
|
Kärcher Customer Service CDN
Call: 1-800-537-4129 for help or visit our website: www.karcher-canada.com
Safety Alert Symbols
DANGER
indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.”
WARNING
indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.”
CAUTION
indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage incidents.”
Owner/User Responsibility
The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning information should be emphasized and understood.
If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/owner, making sure that the operator comprehends its contents.
Owner and/or user must study and maintain for future reference the manufacturers’ instructions.
2 English
MODEL OVERVIEW
1Water inlet with garden hose connector
2Power cord
3ON/OFF switch
4Transport handle, retractable
5Transport handle lock
6Accessory storage
7Detergent tank
8Cap with detergent suction tube
9High pressure hose
10Trigger gun with safety lock
11Vario Power Spray wand
12 Dirtblaster® (Rotating spray wand)
13 HP hose clip
14 Bearing wheel
15 Carrying handle
CAUTION
This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
For household use only!
English 3
IMPORTANT SAFETY INSTRUCTIONS
WARNING! |
The Trigger Gun Safety Lock PRE- |
|
When using this product basic |
VENTS the trigger from accidentally |
|
precautions should always be |
being engaged. This safety feature |
|
followed, including the following: |
DOES NOT lock trigger in the ON |
|
Read all the instructions before us- |
position. |
|
ing the product. |
WARNING |
|
To reduce the risk of injury, close su- |
Do not spray electrical apparatus and |
|
pervision is neccessary when a |
wiring. |
|
product is used near children. |
Do not use with flammable liquids and |
|
Know how to stop the product and |
toxic chemicals. |
|
bleed pressures quickly. Be thor- |
Injection hazard: equipment can cause |
|
oughly familiar with the controls. |
serious injury if the spray penetrates the |
|
Stay alert — watch what you are do- |
skin. do not point the gun at anyone or |
|
ing. |
any part of the body. In case of penetra- |
|
Do not operate the product when fa- |
tion seek medical aid immediately. |
|
tigued or under the influence of alco- |
This system is capable of producing |
|
hol or drugs. |
1750 PSI to avoid rupture and injury, do |
|
Keep operating area clear of all per- |
not operate this pump with components |
|
sons. |
rated less than 1750 PSI working pres- |
|
Do not overreach or stand on unsta- |
sure (including but not limited to spray |
|
ble support. Keep good footing and |
guns, hose and hose connections). |
|
balance at all times. |
Before servicing, cleaning or removing |
|
Follow the maintenance instructions |
any parts, shut off power and relieve |
|
specified in the manual. |
pressure. |
|
Risk of Injection or Injury to persons |
GROUNDING INSTRUCTIONS |
|
- Do not direct discharge stream at |
This product must be grounded. If it |
|
persons. |
||
should malfunction or breakdown, |
||
High pressure jets can be dangerous |
||
grounding provides a path of least resis- |
||
if subject to misuse. The jet must not |
||
tance for electric current to reduce the |
||
be directed at persons, animals, |
||
risk of electric shock. This product is |
||
electrical devices, or the machine it- |
||
equipped with a cord having an equip- |
||
self. |
||
ment-grounding conductor and a |
||
Wear safety goggles. |
||
grounding plug. The plug must be |
||
Do not use acids and solvents in this |
||
plugged into an appropriate outlet that is |
||
product. These products can cause |
properly installed and grounded in ac- |
|
physical injuries to the operator and |
cordance with all local codes and ordi- |
|
irreversible damage to the machine. |
nances. |
|
To reduce the risk of electrocution, |
DANGER |
|
keep all connections dry and off the |
Improper connection of the equipment- |
|
ground. |
||
grounding conductor can result in a risk |
||
Do not touch plug with wet hands. |
||
of electrocution. Check with a qualified |
||
|
4 English
electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this product.
Extension Cords
Use only 3-wire extention cords that have 3-prong grounding-type plugs and 3-pole cord connectors that accept the plug from the product.
Up to 25 ft = 12/3 AWG; 25 to 50 ft = 10/3 AWG.
Use only extension cords that are intended for outdoor use. These extension cords are identified by the marking “Acceptable for use with outdoor appliances; store indoors while not in use.”
Use only extension cords having an electrical rating not less than the rating of the product.
Do not use damaged extension cords.
Examine extension cord before using and replace if damaged.
Do not abuse extension cord and do not yank on any cord to disconnect.
Keep cord away from heat and sharp edges.
Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord.
If you are using an extension cord, it should always be completely unwound from the cable drum.
WARNING
To reduce the risc of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
WATER SUPPLY (Cold Water
Only)
CAUTION
Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.
Water hose must be at least 1/2 inch or 5/8 inch in diameter.
Flow rate of water supply must not fall below 2 GPM (gallons per minute).
Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
The water supply temperature must not exceed 104°F/40°C.
Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
Always prevent debris from being drawn into the unit by using a clean water source.
SAVE THESE
INSTRUCTIONS !
English 5
ASSEMBLY INSTRUCTIONS
Required tools
Screwdriver, small size (not supplied)
for connecting high pressure hose and trigger gun.
Step 1
ÎInsert the bearing wheels into the axle box and lock them.
Step 2
ÎAttach the high pressure hose to the trigger gun. Pull out the locking slide from the right side of the trigger gun handle (A), and insert the small end of the high pressure hose into place
(B). Push the locking slide back into the trigger gun to lock the hose in position (C).
6 English
OPERATING INSTRUCTIONS
ÎSTEP 1:
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
ÎSTEP 2:
Connect garden hose to unit’s water inlet.
ÎSTEP 3:
Connect garden hose to the cold water source and turn water on completely. Plug the power cord into the power outlet.
ÎSTEP 4:
Unlock the trigger gun safety lock. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
Î STEP 5: |
Turn on the high pressure washer
(I).
The motor starts only if the trigger of the gun is pulled and shuts off when the trigger is released.
English 7
USING THE ACCESSORIES
WARNING
To avoid serious injury never point spray nozzle at yourself, other persons or animals.
Vario Power Spray Wand
The Vario Power Spray Wand allows you to adjust the cleaning pressure. To clean at maximum pressure, the wand must be positioned to the high pressure setting (Max).
For lower pressure turn the wand collar in the minus (Min) direction. To apply detergent, the wand must be positioned to the lower pressure setting (Mix).
Dirtblaster®
This nozzle features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This nozzle combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide angle nozzle.
Not recommended for soft materials, siding, painted surfaces, decks or autos.
Always test an inconspicuous area before cleaning with the Dirtblaster
8 English
WORKING WITH DETERGENTS
Detergents can only be applied at low pressure setting (Mix).
ÎSTEP 1:
Install the Vario Power Spray Wand. Set the spray wand to the low pressure setting (Mix).
Î STEP 2: |
Fill the Detergent Tank with the selected Ready To Use detergent.
ÎSTEP 3:
Turn on the pressure washer (I). Pull trigger to operate unit: Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
ÎSTEP 4:
Cleaning up: Always draw fresh water through the detergent tank or siphon tube when done to flush any remaining detergents from the injection system.
For best results see Cleaning Tips for specific information on how to clean different surfaces.
Always Use Kärcher Detergent for Best Results
Kärcher biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. For Kärcher Detergents, check your retailer or visit our website: www.karcher-usa.com/home
The following Kärcher detergents are available:
Pressure wash
Deck + Fence wash
Degreaser
Vehicle wash
CAUTION
Never use:
–Bleach, Chlorine products and other corrosive chemicals
–Liquids containing solvents (i.e., paint thinners, gasoline, oils)
–Tri-sodium phosphate products
–Ammonia products
–Acid-based products
These chemicals will harm the unit and will damage the surface being cleaned.
Use of these items will void the warranty.
English 9
TAKING A BREAK ..five minutes or more
ÎSTEP 1:
Release trigger and engage gun safety lock.
ÎSTEP 2:
Turn pressure washer to OFF (O) position.
B
A
SHUTTING DOWN & CLEAN-UP
ÎSTEP 1:
Turn the switch to OFF (0) position and unplug cord from outlet.
ÎSTEP 4:
Disconnect the garden hose from the water inlet on the unit.
Î STEP 2: |
Î STEP 5: |
|
Release trigger and engage gun |
||
Turn off the water source. |
||
safety lock. |
||
Î STEP 3: |
||
|
||
Press trigger to release water pres- |
|
|
sure. |
|
|
2 3 |
B |
|
|
||
|
A |
10 English
WINTERIZING AND LONG-TERM STORAGE
Î1: Disconnect all water connections.
Î2: Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.
Î3: Do not allow high pressure hose to become kinked.
Î4: Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnace or other sources
of heat as it may dry out the pump seals.
CAUTION
Failure to follow the above directions will result in damage to the pump assembly and accessories and will void the warranty.
Kärcher also recommends the regular practice of using a pump protector like “Kärcher Pump Guard” to prevent cold weather damage during storage in the winter months.
CARE AND MAINTENANCE INSTRUCTIONS
Cleaning the water inlet filter
ÎSTEP 1:
Pull out washer from the water inlet.
ÎSTEP 2:
Pull out water inlet filter with flatnose pliers.
Î STEP 3: |
Rinse out water inlet filter in warm water.
ÎSTEP 4:
Reinsert water inlet filter and washer into the water inlet.
Cleaning the detergent inlet filter
Pull it out and rinse out in warm water.
Maintenance
The unit is maintenance-free.
English 11