JVC TK-C9201EG, TK-C9301EG, TK-C9300U, TK-C9300E, TK-C9200U User Manual

...
0 (0)
JVC TK-C9201EG, TK-C9301EG, TK-C9300U, TK-C9300E, TK-C9200U User Manual

COLOR VIDEO CAMERA

TK-C9200U

INSTRUCTIONS

TK-C9200E

 

TK-C9201EG

 

TK-C9300U

 

TK-C9300E

 

TK-C9301EG

 

FOR CUSTOMER USE:

Enter below the Serial No. which is located on the body. Retain this information for future reference.

Model No. TK-C9200U,TK-C9200E,TK-C9201EG

TK-C9300U,TK-C9300E,TK-C9301EG

Serial No.

.

LST0984-001A

Introduction

 

Contents

 

Introduction

 

Contents .............................................................................................................

2

Features .............................................................................................................

3

Operating Precautions .......................................................................................

4

Connection/Installation

 

Mounting the Lens .............................................................................................

6

Connection .........................................................................................................

7

Mounting the Camera ........................................................................................

9

Setting/Adjustment

 

Switch Settings ................................................................................................

11

Adjusting the Back Focus ................................................................................

12

Fine-tuning the Focus ......................................................................................

13

Adjusting the Auto White Balance ....................................................................

14

Others

 

Specifications ...................................................................................................

15

2

Introduction

Thank you for purchasing this product.

Before use, please read this "INSTRUCTIONS" and the information materials included to ensure proper use of this product.

The instructions in this manual are for TK-C9200U/TK-C9200E/TK-C9201EG/TK- C9300U/TK-C9300E/TK-C9301EG.

Features

vWide dynamic range (WIDE-D) function (TK-C9300U/TK-C9300E/TK-C9301EG only)

vDAY/NIGHT surveillance with auto IR cut filter on/off (Color/B&W shooting) (TK-C9300U/TK-C9300E/TK-C9301EG)

Easy DAY/NIGHT function (TK-C9200U/TK-C9200E/TK-C9201EG)

v3D noise reduction (3DNR)

v4 areas privacy mask

vBuilt-in display mode (CRT or LCD selectable)

How to read this manual

Conventions and symbols

Note : Indicates operating precautions.

Memo : Indicates reference data regarding limitations on functions, usage and the like.

A : Indicates a reference page or item. Contents of this manual

vJVC holds the copyright to this manual. Any part or all of this manual may not be reproduced without prior consent from the company.

vProduct names of other companies described in this manual are trademarks

or registered trademarks of the respective companies. Symbols such as , ,

E T

and are omitted in this manual.

R

vDesign, specifications and other contents described in this manual are subject to change for improvements without prior notice.

3

Introduction

Operating Precautions

m Storage and Location of Use

vDo not install the camera in the following places.

-In a place exposed to rain or moisture.

-In a place with vapor or oil, for example in a kitchen.

-When the ambient temperature rises above or falls below the acceptable range (from -10 f to 50 f)

-In a place at which corrosive gases are emitted.

-Near a source of radiation, X-rays, strong radio waves or magnetism.

-In a place subject to vibration.

-In a place with excessive dirt.

vUsing this unit in the vicinity of the transmitting antenna of a radio or TV, devices that emit strong electromagnetic waves such as a transformer or motor, or wireless devices such as a transistor or mobile phone may give rise to noises in the image and changes in its color.

vThis camera has been designed for indoor use. When using it outdoors, it is necessary to use an outdoor camera housing (optional).

m Maintenance

v Wipe the camera with a dry, soft cloth to remove any dirt.

Do not use benzene or thinner to wipe the camera. Doing so may melt the surface or cause it to fog. For tough stains, wipe with a neutral detergent diluted with water, followed by wiping with a dry cloth.

m Energy Conservation

v When the camera is not in use for a long time, turn off the power for safety and energy conservation reasons.

m Copyright Protection

vWith the exception of the user being the copyright holder or when permission such as for duplication has been granted by the copyright holder, permission is required in principle for the duplication, modification, or transmission of copyrighted material.

vUnauthorized duplication, modification, or transmission of copyrighted material may constitute a copyright infringement, and the user may be liable to compensate for any damages. When using copyrighted material, be sure to check the license agreement of the copyrighted material thoroughly.

vWhen rights or rights holders are involved with regard to the targeted duplicating subject, permission may be required for shooting or using (processing) it. Be sure to check the licensing conditions thoroughly.

m Disclaimer

vMotion detection is not a feature to prevent theft or fire. We do not accept liability for any damages that may occur.

4

Introduction

vWe will not be responsible for any inconveniences or disturbances caused in the event of privacy invasion as a result of camera footages of this product.

m Others

vWhen using this camera with [AGC] set to "MID" or "HIGH", the sensitivity increases automatically for dark images and the screen may appear grainy, but this is not a malfunction.

vWhen the DAY/NIGHT switch is set to "AUTO", the image turns black-and-white in a dark location. As the sensitivity level is increased in this case, the screen may appear grainy and more white spots may appear. When switching between modes, the brighter area on the screen is emphasized and visibility may be reduced. However, this is not a malfunction.

vBefore mounting the camera to the mounting location, attach the lens to be used on the camera and check the back focus.

vWhen shooting an extremely bright object (e.g. lamp), the image on the screen may have white vertical tailings (smear) or expansion (blooming) may appear around it. This is a characteristic of the CCD and not a malfunction.

vWhen the white balance of this camera is set to "ATW-N" or "ATW-W" and depending on the conditions of the object, the color tone may differ slightly from the actual color due to the principle of the automatic tracking white balance circuit. This is not a malfunction.

vWhen this camera is used under high temperatures, vertical stripes may appear on the screen. This is a characteristic of the CCD and not a malfunction.

vWhen this camera is moved from a cold to warm place, condensation may occur and the camera may not work. In this case, leave the camera under room temperature for about one hour before turning on the power.

vWhen the power supply voltage is momentarily disrupted or drops due to lightning, turning on the air-conditioner or the like, image distortion or noise may occur.

vWhen the power supply voltage of the camera drops, the input protection circuit inside the camera operates, and the camera may be turned off. Make use of a

voltage rating within 10 % for the camera’s power supply voltage.

5

vThe 3D noise reduction function of this camera may result in afterimage of a moving subject. Afterimage is more likely to occur when using the camera with [DNR LEVEL] set to "HIGH". This is not a malfunction.

5

Loading...
+ 11 hidden pages