JVC SP-WS1, SP-THS1F, SP-THS1S, XV-THS1 User Manual

DVD DIGITAL CINEMA SYSTEM

TH-S1

Consists of XV-THS1, SP-WS1, SP-THS1F, and

SP-THS1S

INSTRUCTIONS

GVT0141-008A [B]

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT.

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION— button! (XV-THS1)

Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off).

The button in any position does not disconnect the mains line.

•When the system is on standby, the STANDBY lamp lights red.

•When the system is turned on, the STANDBY lamp goes off. The power can be remote controlled.

CAUTION

•Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

•Do not place any naked flame sources, such as lighted candles, on the apparatus.

•When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

•Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

G-1

Caution: Proper Ventilation

To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are shown below:

Front view

Side view

Wall or	XV-THS1	8 cm
obstructions		3 cm
3 cm
		15 cm

	Wall or obstructions
Front	XV-THS1
	10 cm
No
obstructions

SAFETY INSTRUCTIONS

“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

Do read the operating instructions before you attempt to use the equipment.

Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

Do be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode.

Switch off using the switch on the equipment and make sure that your family know how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume as such use can permanently damage your hearing.

DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL

—NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock.;

—NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

E43486-340B

G-2

Table of contents

Introduction .....................................	2
Notes on handling .................................................................	2
Supplied accessories ............................................................	2
About discs .....................................	3
Playable disc types ...............................................................	3
Index of parts and controls ............	5
Connections ....................................	7
Connecting the FM and AM (MW) antennas .........................	7
Connecting the satellite (front, center, surround) speakers and
the subwoofer .........................................................................	8
Speaker layout ......................................................................	9
Connecting a TV ....................................................................	9
Connecting to an analog component ...................................	10
Connecting to a digital component .....................................	10
Connecting the power cord .................................................	10
Operating external components with
the remote control ........................	11
Operating the TV .................................................................	11
Operating the VCR ..............................................................	12
Basic operations ...........................	13
Turning the system on/off ...................................................	13
Selecting the source to play ................................................	14
Adjusting the volume [VOLUME] ........................................	14
Listening with headphones (not supplied) ..........................	14
Turning off the sound temporarily [MUTING] .....................	14
Adjusting the brightness of the indications [DIMMER] .......	14
Sleep Timer [SLEEP] ...........................................................	15
Adjusting the output level of the subwoofer and center/
surround speakers [S.WFR, CENTER, L-SURR.-R] .............	15
Adjusting the treble sound [TREBLE] ..................................	15
Changing the video signal ...................................................	15

Playback ........................................	16
Basic playback ....................................................................	16
One Touch Replay ...............................................................	18
Fast-forward/fast-reverse search ........................................	18
Skip to the beginning of a desired selection .......................	18
Locating a desired title/group using number buttons .........	19
Advanced operations ....................	20
Using the surround mode ...................................................	20
Using the on-screen bar .....................................................	21
Playing from a specified position on a disc .........................	23
Using the file control display ..............................................	24
Resume Playback ...............................................................	25
Selecting a view angle .........................................................	25
Selecting the subtitle ..........................................................	26
Selecting the audio .............................................................	26
Special picture playback .....................................................	27
Program Playback ...............................................................	28
Random Playback ...............................................................	28
Repeat Playback .................................................................	29
Tray lock .............................................................................	30
Sound and other settings ....................................................	30
Setting DVD preferences ..............	31
Using the setup menus .......................................................	31
Menu description ................................................................	31
Tuner operations ...........................	35
Manual tuning .....................................................................	35
Preset tuning ......................................................................	35
Selecting the FM reception mode ........................................	36
Using the RDS (Radio Data System) when receiving FM
stations ...............................................................................	36
References ....................................	39
Maintenance .......................................................................	39
Troubleshooting ..................................................................	39
Specifications .....................................................................	40

1

Introduction

Notes on handling

7 Important cautions

Installation of the system

•Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C.

•Leave sufficient distance between the system and the TV.

•Do not use the system in a place subject to vibration.

Power cord

•Do not handle the power cord with wet hands!

•A small amount of power is always consumed while the power cord is connected to the wall outlet.

•When unplugging the power cord from the wall outlet, always pull on the plug, not the power cord.

To prevent malfunctions of the system

•There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

•Do not insert any metallic object into the system.

•Do not use any non-standard shape disc (like a heart, flower or credit card, etc.) available on the market, because it may damage the system.

•Do not use a disc with tape, stickers, or paste on it, because it may damage the system.

Label sticker

Sticker

Paste

Note about copyright laws

Check the copyright laws in your country before recording from the discs. Recording of copyrighted material may infringe copyright laws.

Note about copyguard system

The discs are protected by copyguard system. When you connect the system to your VCR directly, the copyguard system activates and the picture may not be played back correctly.

7 Safety precautions

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near a heating device.

When you are away

When away on travel or for other reasons for an extended period of time, disconnect the power cord plug from the wall outlet.

Do not block the vents

Blocking the vents may damage the system.

Care of the cabinet

When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the wall outlet, then call the store where you made your purchase. Using the system in this condition may cause fire or electrical shock.

Supplied accessories

Check to be sure you have all of the supplied accessories.

The number in parentheses is the quantity of the pieces supplied. If anything is missing, contact your dealer immediately.

•Remote control (1)

•Batteries (2)

•FM antenna (1)

•AM loop antenna (1)

2

About discs

Playable disc types

This system has been designed to play back the following discs: DVD VIDEO, Video CD (VCD), Super Video CD (SVCD), Audio CD (CD), CD-R and CD-RW.

•This system accommodates the PAL system, and also can play discs recorded with NTSC system. Note that an NTSC video signal on a disc is converted to the PAL60 signal and output.

•This system can also play finalized DVD-R/-RWs recorded in DVD VIDEO format. However, some discs may not be played because of their disc characteristics or recording conditions.

Discs you can play:

DVD VIDEO			Audio CD

VCD	CD-R

SVCD	CD-RW

•The following discs cannot be played back:

DVD AUDIO, DVD-ROM, DVD-RAM, CD-ROM, CD-I (CD-I Ready), Photo CD, SACD, etc.

Playing back these discs will generate noise and damage the speakers.

•On some DVD VIDEOs, VCDs or SVCDs, their actual operation may be different from what is explained in this manual. This is due to the disc programming and disc structure, not a malfunction of this system.

DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.

Region code of DVD VIDEO

DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This system can play back DVD VIDEO discs whose Region Code numbers include the system’s Region Code, which is indicated on the rear panel.

Example of playable DVD:

If a DVD with an improper Region Code number is loaded, “REGION CODE ERROR!” appears on the TV screen and playback cannot start.

About files (tracks) and folders (groups) on the disc

This system can also play MP3 and JPEG files recorded on CD-Rs and CD-RWs.

Files are sometimes grouped into folders on CD-Rs or CD-RWs by genre, album, etc.

In this manual, “group” is also referred to as “folder”, and “track” as “file”.

•This system recognizes up to 150 files per group, and 99 groups per disc.

The total number of files this system can detect on a disc is up to 1000.

3

About discs

Notes on CD-R and CD-RW

•User-edited CD-Rs (Recordable) and CD-RWs (Rewritable) can be played back only if they are already “finalized”.

•When making your own disc, select ISO 9660 Level 1 or Level 2 for the disc format.

•This system supports “multi-session” discs (up to 20 sessions).

•This system cannot play “packet write” discs.

•Before playing CD-Rs or CD-RWs, read their instructions or cautions carefully.

•CD-RWs may require a longer readout time. This is caused by the fact that the reflectance of CD-RWs is lower than that of regular CDs.

•Some discs may not be played due to their disc characteristics, recording conditions, or damage or stain on them.

•This system can play CD-Rs or CD-RWs recorded in the audio CD format.

This system can also play CD-Rs or CD-RWs if MP3 or JPEG files are recorded on them.

Especially, the configuration and characteristics of an MP3/JPEG disc are determined by the writing (encoding) software and hardware used for recording. Therefore, due to the software and hardware used, the following symptoms may occur:

•Some tracks/files on an MP3/JPEG disc may be skipped or may not be played normally.

•Some files on a JPEG disc may be played distortedly.

Notes on MP3/JPEG discs

•MP3/JPEG discs (either CD-R or CD-RW) require a longer readout time. (It differs due to the complexity of the directory/file configuration.)

•The system can only recognize files with one of the following extensions, which can be in any combination of upper and lower case:

MP3: “.MP3”, “.mp3”

JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”

•If different kinds of the file are mixed on a disc, set the FILE TYPE setting in the PICTURE menu to the appropriate setting for the data to be read (“AUDIO” or “STILL PICTURE”). (See page 32.)

Notes on MP3 files

•Tag information (album name, artist name, and track name) can be shown on the TV. (See page 24.)

•The system can play back the MP3 files recorded at 32 kbps to 320 kbps as a bit rate, and at 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz as a sampling frequency.

•We recommend to record each piece of material (song) at a sample rate of 44.1 kHz and at a data transfer rate of 128 kbps.

Notes on JPEG files

•We recommend to record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a longer time to be displayed.)

•This system can only play baseline JPEG files.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

4

Index of parts and controls

The numbers in the figures indicate the pages where the details of the parts are described.

Front panel (center unit)

Display window
21	35	17	21

17			17		17			17			17			35			35			36		36, 38				29

Disc tray (inside): 16

16

13

13

16

16

16 18

18 14

14

14

Remote sensor: 6

Rear panel (center unit)

For future use

9

10						8																					10						10						7

5

Index of parts and controls

Remote control

Putting batteries in the remote control

	16	13
	11	11
		12
	14
		14
	26	17
	26	21
		14
	11	11 – 38
	11	16, 38
		18, 35
		18, 37
	23	16, 36
		23, 37
	16, 35
		15, 31
	12, 18	21, 36
	19
	25
	27	Number
		buttons: 18
	29	28
	29	28
	31	23
	30	15, 27
	14	15
	15
	15	15
	15
		NOTE

•To use the buttons under the cover, slide down the cover.

R6P (SUM-3)/AA (15F) type dry-cell batteries (supplied)

If the range or effectiveness of the remote control decreases, replace both batteries.

CAUTION

• Do not expose batteries to heat or flame.

Operating the system from the remote control

Aim the remote control directly to the front panel of the center unit.

• Do not hide the remote sensor.

6

Connections

Do not connect the power cord until all other connections have been made.

Connecting the FM and AM (MW) antennas

7 AM (MW) loop antenna

Setting up supplied AM (MW) loop antenna

If the antenna cord is covered with the insulation coat, twist and pull the insulation coat off and remove.

Connecting AM (MW) loop antenna

1

2

Antenna cord

3

If reception is poor

Center unit

AM (MW) loop antenna

Outdoor single vinyl-covered wire antenna (not supplied)

7 FM antenna

FM antenna (supplied)

Center unit

Extend the supplied FM antenna horizontally.

If reception is poor

Center unit

		Outdoor FM antenna
		(not supplied)
	Standard type (75 C	Outdoor FM antenna cord
	coaxial) connector
		(not supplied)

NOTE

•We recommend that you use coaxial cable for the FM antenna as it is well-shielded against interference.

•Turn the loop antenna until you have the best reception during AM (MW) broadcast program reception.

NOTE

•Make sure the antenna conductors do not touch any other terminals, connecting cords and power cords. This could cause poor reception.

7

Connections

Do not connect the power cord until all other connections have been made.

Connecting the satellite (front, center, surround) speakers and the subwoofer

Front speakers

Center speaker

Speaker cord

• Connect the black cords to the black (-) terminals.

• Connect the white cords to the red (+) terminals.

Before connecting the speaker cords;

Twist and pull the insulation coat off and remove.

Subwoofer

Surround speakers

CAUTION

•When you connect speakers other than the supplied ones, use speakers of the same speaker impedance (SPEAKER IMPEDANCE) indicated on the rear of the center unit.

•DO NOT connect more than one speaker to one speaker terminal.

•When installing the satellite speakers on the wall;

•Be sure to have them installed on the wall by a qualified personnel. DO NOT install the satellite speakers on the wall by yourself to avoid unexpected damage from their falling off the wall due to incorrect installation or weakness in wall structure.

•Care must be taken in selecting a location for speaker installation on a wall. Injury to personnel or damage to equipment may result if the speakers installed interfere with daily activities.

8

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

	Center speaker
Front left	Front right
speaker	speaker
	Subwoofer

Surround left	Surround right
speaker	speaker

NOTE

•Although the satellite speakers and the subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distance between the speakers and the TV.

•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

-When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main

power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•Place the satellite speakers on a flat and level surface.

•Be sure to place the subwoofer to the TV’s right. If you place the subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Connecting a TV

•Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (See page 32.)

Center unit

TV

To SCART connector*

SCART cable (not supplied)

*Some TV’s SCART connectors output audio signal. In such a case, you can enjoy the TV sound through this system.

NOTE

•No sound signal comes out from “AV” (SCART) connector.

•Select the appropriate video signal according to your TV. (See page 15.)

9

Connections

Do not connect the power cord until all other connections have been made.

Connecting to an analog component

You can enjoy the sound of an analog component.

Center unit

RCA pin plug cord (not supplied)

To audio output

VCR

TV

Cassette recorder

NOTE

•If you connect a sound-enhancing device such as a graphic equalizer between the source components and this system, the sound output through this system may be distorted.

•When playing a video component such as a VCR;

•To listen to the sound, select “AUX” as the source to play. (See page 14.)

•To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode on the TV.

Connecting to a digital component

You can enjoy the sound of a digital component.

Center unit

DBS* tuner

MD recorder

To digital optical Digital optical cord output

(not supplied)

* DBS = Direct Broadcasting Satellite

NOTE

When playing a video component such as a DBS tuner;

•To listen to the sound, select “AUX DIGITAL” as the source to play. (See page 14.)

•To see the picture, connect the video output jack of the component to the video input jack of the TV directly, and select the correct input mode on the TV.

Connecting the power cord

Make sure that all other connections have been completed.

Center unit

Power cord

Plug into AC outlets.

CAUTION

•Disconnect the power cord before cleaning or moving the system.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp and pull the plug so as not to damage the cord.

NOTE

•Preset settings, such as preset stations and surround mode adjustment, may be erased in a few days in the following cases;

•If you unplug the power cord of the center unit.

•If a power failure occurs.

10

Operating external components with the remote control

The buttons described below are used on pages 11 and 12.

Remote control mode selector

(play button)

Number buttons

NOTE

•Manufacturers’ codes are subject to change without notice.

•Set the codes again after replacing the batteries of the remote control.

Operating the TV

7 To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector to TV.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 0, then 7.

For a Toshiba TV:

Press 2, then 9.

	Manufac-	Code	Manufactur-	Code
	turer		er
	JVC	01	Nordmende	13, 14, 18, 26 – 28
	Akai	02, 05	Okano	09
	Blaupunkt	03	Orion	15
	Daewoo	10, 31, 32	Panasonic	16, 17
	Fenner	04, 31, 32	Philips	10
	Fisher	05	Saba	13, 14, 18, 26 – 28
	Grundig	06	Samsung	10, 19, 32
	Hitachi	07, 08	Sanyo	05
	Inno-Hit	09	Schneider	02, 05
	Irradio	02, 05	Sharp	20
	Magnavox	10	Sony	21	– 25
	Mitsubishi	11, 33	Telefunken	13, 14, 18, 26 – 28
	Miver	03	Thomson	13, 14, 18,
				26	– 28, 30
	Nokia	12, 34	Toshiba	29

5 Release TV.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

7 Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available: TV:Turns TV on and off.

TV VOL +/–:Adjusts the volume.

TV/VIDEO:Selects the input mode (either TV or VIDEO). CHANNEL +/–:Changes the channels.

1-10, 0, +10 (100+):Selects the channel.

TV RETURN:Alternates between the previously selected channel and the current channel.

11