JVC MX-J333VU User Manual

5 (1)

COMPACT COMPONENT SYSTEM

MX-J333V/MX-J383V

CA-MXJ333V

CA-MXJ383V

		CD3			CD3
	CD3	CD2		CD3	CD2
	CD2	CD1		CD2	CD1
	CD1			CD1
1 BIT	VOLUME		1 BIT	VOLUME
DUAL D/A CONVERTER	+		DUAL D/A CONVERTER	+
	+			+
NTSC / PAL COMPABILITY	–		NTSC / PAL COMPABILITY	–
TAPE		CD	TAPE		CD
AUX		FM/ AM	AUX		FM/ AM
A			A

B			B
+	PLAY	REC/PLAY	+	PLAY	REC/PLAY
–			–
	AUTO REVERSE	AUTO REVERSE		AUTO REVERSE	AUTO REVERSE

COMPACT

SUPER VIDEO

EJECT

	COMPACT
SP-MXJ333	SP-MXJ383

DIGITAL VIDEO

COMPACT

DIGITAL AUDIO

INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.

Model No.

Serial No.

GVT0017-001A

[ UB, U, US, UT ]

Warnings, Cautions and Others

Avisos, precauciones y otras notas

Advertências, precauções e outras notas

Caution –– switch!

Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The power can be remote controlled.

Precaución –– Interruptor!

Desconectar el cable de alimentación para desactivar la alimentación totalmente. Cualquier que sea la posición

de ajuste del interruptor			, la alimentación no es

cortada completamente. La alimentación puede ser controlada remotamente.

Precaução –– Interruptor !

Desconectar o cabo de alimentação para desligar a alimentação por completo. Qualquer que seja a posição de ajuste do interruptor , a alimentação não é completamente cortada. A alimentação pode ser controlada remotamente.

G-1

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

PRECAUCIÓN

Para reducir riesgos de choques eléctricos, incendio, etc.:

1.No extraiga los tornillos, los cubiertas ni la caja.

2.No exponga este aparato a la lluvia o a la humedad.

PRECAUÇÃO

Para reduzir riscos de choques elétricos, incêndio, etc.:

1.Não remova parafusos e tampas ou desmonte a caixa.

2.Não exponha este aparelho à chuva nem à umidade.

G-2

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1	Front:	No obstructions and open spacing.
2	Sides/ Top/ Back:	No obstructions should be placed in the areas shown by the dimensions below.
3	Bottom:	Place on the level surface. Maintain an adequate air path for ventilation by placing on a
		stand with a height of 10 cm or more.

Precaución: el aparato debe estar bien ventilado

Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el aparato del modo siguiente:

1	Parte delantera:	No ponga nada delante, deje el espacio libre.
2	Laterales/ parte superior/ parte trasera: No se debería colocar nada en las áreas y las distancias que se
		detallan a continuación.
3	Parte inferior:	Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire;
		para ello, coloque el aparato sobre una base a una altura mínima de 10 cm.

Precaução: Ventilação adequada

Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:

1	Parte frontal:	Sem obstruções e espaços abertos.
2	Partes laterais/Tampa/Posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões
		são indicadas abaixo.
3	Parte inferior:	Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a
		ventilação se este for instalado numa posição que tenha uma altura de 10 cm ou mais.

1 cm

15 cm

1 cm

15 cm

1 cm

15 cm

CA-D3S

-MXJ333V

-MXJ383V

10 cm

G-3

IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER / IMPOTANTE PARA PRODUTOS LASER //

REPRODUCTION OF LABELS / REPRODUCCIÓN DE ETIQUETAS / REPRODUÇÃO DE ETIQUETAS /

1	CLASSIFICATION LABEL, PLACED ON REAR	2	WARNING LABEL, PLACED INSIDE THE UNIT
	ENCLOSURE
1	ETIQUETA DE CLASIFICACIÓN, PEGADA EN LA PARTE	2	ETIQUETA DE ADVERTENCIA, PEGADA EN EL
	POSTERIOR DE LA CAJA		INTERIOR DE LA UNIDAD
1	ETIQUETA DE CLASSIFICAÇÃO LOCALIZADA NA	2	ETIQUETA DE ADVERTÊNCIA LOCALIZADA NA PARTE
	PARTE POSTERIOR DA CAIXA DO APARELHO.		INTERNA DA UNIDADE.

CLASS 1

LASER PRODUCT

DANGER: Invisible laser radiation when open and interlock failed or defeated.

AVOID DIRECT EXPOSURE TO BEAM. (e)

VARNING: Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad. Betrakta ej strålen. (s)

ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling (d)

VARO: Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle. Älä katso säteeseen. (f)

1.CLASS 1 LASER PRODUCT

2.DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

1.PRODUCTO LÁSER CLASE 1

2.PELIGRO: En el interior hay radiación láser invisible.

Evite el contacto directo con el haz.

3.PRECAUCIÓN : No abra la tapa superior. En el interior de la unidad no existen piezas reparables por el usuario; deje todo servicio técnico en manos de personal calificado.

1.PRODUTO LASER CLASSE 1

2.PERIGO: O laser emite uma rediação invisível que é perigosa, caso o aparelho esteja aberto e a trava inoperante ou danificada. Evite exposição direta ao feixe dos raios.

3.CUIDADO: Não abra a caixa do aparelho. Não existem peças reparáveis pelo usuário na parte interna da unidade. Solicite assistência técnica somente a pessoal técnico qualificado.

G-4

English

Introduction

We would like to thank you for purchasing one of our JVC products.

Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference.

About This Manual

This manual is organized as follows:

•The manual mainly explains operations using the buttons and controls on the unit. You can also use the buttons on the remote control if they have the same or similar names (or marks) as those on the unit.

If operation using the remote control is different from that using the unit, it is then explained.

•This manual explains by using number of location of buttons and controls.

Please refer to pages 26 to 28 "Location of the Buttons and Controls".

•Basic and common information that is the same for many functions is grouped in one place, and is not repeated in each procedure. For instance, we do not repeat the information about turning on/ off the unit, setting the volume, changing the sound effects, and others, which are explained in the section “Common Operations” on pages 7 to 8.

•The following marks are used in this manual:

Gives you warnings and cautions to prevent from a damage or risk of fire/electric shock.

Also gives you information which is not good for obtaining the best possible performance from the unit.

Gives you information and hints you had better know.

Precautions

Installation

•Install in a place which is level, dry and neither too hot nor too cold — between 5˚C (41˚F) and 35˚C (95˚F).

•Install the unit in a location with adequate ventilation to prevent internal heat built-up in the unit.

•Leave sufficient distance between the unit and the TV to avoid interference.

•Keep the speakers away from the TV to avoid interference with TV.

DO NOT install the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

Power sources

• When unplugging from the wall outlet, always pull the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

•After starting heating in the room

•In a damp room

•If the unit is brought directly from a cold to a warm place Should this occur, the unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, and then plug it in again.

Others

•Should any metallic object or liquid fall into the unit, unplug the unit and consult your dealer before operating any further.

•If you are not going to operate the unit for an extended period of time, unplug the AC power cord from the wall outlet.

DO NOT disassemble the unit since there are no user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and consult your dealer.

Which compact discs can be used?

Many types of compact discs are sold for a variety of uses. The player can play the following compact discs:

Super VCD (SVCD) discs

•Better video resolution using MPEG2 and VBR (Variable Bit Rate) technologies.

•Up to four languages can be included as subtitles or song lyrics.

•Up to four languages can be included as audio.

Video CD discs both with and without PBC function.

Audio CD discs

COMPACT

SUPER VIDEO

COMPACT

DIGITAL VIDEO

COMPACT

DIGITAL AUDIO

Discs you cannot play back

Any other discs than listed above (such as CD-ROM, DVD, CD-I or CD-G Discs) cannot be played. Playing back such discs may generate noise and damage your speaker.

Even though a logo listed above is printed on the disc, it may not be played if it is a non-standard disc.

EN1-5;MX-J333V/PM6	1			6/30/99, 2:22 PM

Table of Contents

Getting Started ...............................................	3
Unpacking ..................................................................	3
Putting the Batteries into the Remote Control ...........	3
Connecting Antennas .................................................	3
Connecting Speakers ..................................................	4
Connecting Auxiliary Equipment ...............................	5
Adjusting the Voltage Selector ...................................	6
To know the locations of Buttons and controls ..........	6

Playing Back Tapes ......................................	17
Playing Back a Tape .................................................	17
Locating the Beginning of a Song — Music Scan ...	17
Recording .....................................................	18
Recording Tapes on Deck B .....................................	18
Dubbing Tapes ..........................................................	19
CD Direct Recording ...............................................	19

Common Operations .....................................	7
Setting the Clock ........................................................	7
Setting the AM Tuner Interval Spacing ......................	7
Turning On the Power and Selecting the Sources ......	7
Adjusting the Volume .................................................	8
Reinforcing the Bass Sound .......................................	8
Selecting the Sound Modes ........................................	8
Playing Back Audio CDs ...............................	9
Placing CDs ................................................................	9
Playing Back the Entire Discs
— Continuous Play ................................................	9
Basic CD Operations ..................................................	9
Programming the Playing Order of the Tracks
— Program Play ...................................................	10
Playing at Random — Random Play .......................	11
Repeating Tracks or CDs — Repeat Play ................	11
Prohibiting Disc Ejection — Tray Lock ...................	11
Playing Back Video CDs/SVCDs ................	12
Selecting Video Out .................................................	12
Placing CDs ..............................................................	12
Playing a Video CD ..................................................	12
Playing Video CDs/SVCDs with PBC function
— Menu Play ........................................................	13
Basic Concept of the PBC function .........................	13
Playing Video CDs/SVCDs without the PBC function
— Continous Play ................................................	14
Resuming play ..........................................................	14
Special Plays for a Video CD ...................................	14
Playing a multiplex sound CD .................................	15
Using SUBTITLE ....................................................	15
Listening to FM and AM Broadcasts .........	16
Tuning in a Station ...................................................	16
Presetting Stations ....................................................	16
Tuning in a Preset Station ........................................	16

Using the Microphones ................................	20
Singing Along ...........................................................	20
Singing Along with Multiplex Karaoke
Discs (MPX) .........................................................	20
Recording Your Singing ...........................................	21
To apply an echo to your voice ................................	21
Adjust the Music Key Control (for CD play only) ..	21
Microphone mixing ..................................................	21
Using the Timers ..........................................	22
Using Daily Timer ....................................................	22
Using Recording Timer ............................................	23
Using Sleep Timer ....................................................	24
Timer Priority ...........................................................	24
Maintenance .................................................	25
Troubleshooting ...........................................	25
Location of the Buttons and Controls ........	26
Remote Control ........................................................	26
Remote Sensor .........................................................	26
Display Window .......................................................	27
Front Panel ...............................................................	27
Specifications ................................................	29

English

EN1-5;MX-J333V/PM6	2			6/30/99, 2:22 PM

English

Getting Started

Unpacking		Connecting Antennas

After unpacking, check to be sure that you have all the following items.

The number in the parentheses indicates the quantity of the pieces supplied.

•AM loop antenna (1)

•FM antenna (1)

•Remote control (1)

•Batteries (2)

•AC plug adaptor (except for Vietnam, Hong Kong and The People's Republic of China: 1)

•Video cord (1)

If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries — R6P(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment.

When the remote control can no longer operate the unit, replace both batteries at the same time.

2 R6P(SUM-3)/AA(15F)

• DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

FM antenna

ANTENNA

		FM antenna (supplied)
AM LOOP
AM EXT		Outdoor FM antenna
		(not supplied)
	FM
FM
(75	)
1	2	3
		10 mm
		(7/16 in. )

20 mm (13/16 in.)

Extend the FM antenna (supplied) horizontally.

If reception is poor

Connect the outdoor antenna.

Before attaching a 75-ohm coaxial cable (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM antenna.

How to strip the 75-ohm coaxial cable and connect it to the FM terminals

1.Strip off the outside covering of the 75-ohm coaxial cable to expose the braided metallic mesh about 20 mm (13/16 inches).

2.Pull the mesh back and twist it into a single connector as shown in the illustration above.

3.Strip the insulation about 10 mm (7/16 inches) back from the central wire.

4.Insert the twisted mesh and the central wire to the FM terminals, as shown in the illustration above.

Continued

EN1-5;MX-J333V/PM6	3			6/30/99, 2:22 PM


AM antenna	Connecting Speakers

You can connect a pair of front speakers.

To connect front speakers

2, 3

ANTENNA

AM LOOP	Vinyl-covered wire
AM LOOP	(not supplied)
AM EXT	(not supplied)	Red
AM EXT		Red
	Speaker cord		Speaker cord
FM	Speaker cord	SPEAKERS
FM		RIGHT	LEFT
FM
(75 )
		Black

AM loop antenna (supplied)

1Connect the AM loop antenna to the AM LOOP terminals as illustrated.

2 Turn the AM loop antenna until you have the best	Right	Left
2 Turn the AM loop antenna until you have the best	speaker	speaker
reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM

•Make sure the antenna conductors do not touch any other terminals and connecting cords.

•Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the terminal. Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–).

3Release the finger from the clamp.

IMPORTANT: Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

Continued

English

EN1-5;MX-J333V/PM6	4			6/30/99, 2:22 PM

English

Connecting Auxiliary Equipment

You can connect an audio equipment – used only as a playback device.

When you connect and use this equipment, refer also to its manual.

Be sure that the plugs of the audio cords are colour-coded:

White plugs and jacks are for left audio signals, and red ones for right audio signals.

• DO NOT connect any equipment while the power is on.

• DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

VCR or other equipment

You can connect the following equipment to this system.

•TV with a video input jack: used as a monitor of video CD playback.

•Audio/Video equipment.

To listen to this source, press AUX p, ~.

Auxiliary Equipment
TV
	STEREO RECEIVER
	MODEL NO. MX - J333V
	AC 110/127/220
VIDEO	/ 230 - 240V
VIDEO	50/60Hz 85W
OUT
To video input

AUX

RIGHT LEFT

To audio output

Audio/video equipment

Connect the audio output jacks on the other equipment and the AUX jacks on the rear, using an audio cord (not supplied).

When connecting Auxiliary Equipment

•Connect the VIDEO OUT jack at the back panel of the System to the video input jack on the TV via the supplied video cord.

•Connect the AUX jacks to the output of Audio/Video equipment.

•No audio signal is produced at the AUX IN jacks.

5	Continued

EN1-5;MX-J333V/PM6	5			6/30/99, 2:22 PM

Adjusting the Voltage Selector

Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.

VOLTAGE

SELECTOR

	VIDEO
	OUT
		STEREO RECEIVER
		MODEL NO. MX - J333V
ANTENNA		UNIT NO. MX-J333V
ANTENNA		AC 110/127/220
		/ 230 - 240V
		50/60Hz 85W
	AM LOOP
	AM EXT
	FM	220V	110V
	FM
	(75 )	230V
		-240V	127V
	AUX
RIGHT	LEFT
			SPEAKERS
		CAUTION:
		SPEAKER IMPEDANCE
		6 ~ 16

220V	110V	To a wall outlet

If the wall outlet does not match the AC plug, use the supplied

AC plug adaptor.

230V

-240V 127V

Voltage mark

Use a screwdriver to rotate the voltage selector so the voltage number and the voltage mark is pointing at is the same as the voltage where you are plugging in the unit.

• DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.

NOW, you can plug in the unit and other connected equipment FINALLY!

When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.

To stop the display demonstration, press any button on the unit or the remote control.

To start the display demonstration manually

Press and hold DEMO / for more than 2 seconds.

DEMO

To stop the demonstration, press any button.

To know the locations of Buttons and controls

Please refer to page 26, 27 and 28 for location of the buttons and controls on your unit. The buttons and controls mentioned in the steps in this manual have been inserted with numbers i.e 1, 2(for unit) or 1, 2 ( for remocon) for your easy reference.

English

EN6-16;MX-J333V/PM6	6			6/30/99, 2:26 PM

+ 24 hidden pages