JVC MX-GB5, MX-GB5E, MX-GB6E User Manual [fr]

0 (0)
JVC MX-GB5, MX-GB5E, MX-GB6E User Manual

COMPACT COMPONENT SYSTEM

SYSTEME DE COMPOSANTS COMPACT

MX-GB6—Consists of CA-MXGB6 and SP-MXGB6

—Composé du CA-MXGB6 et SP-MXGB6

MX-GB5—Consists of CA-MXGB5 and SP-MXGB5

—Composé du CA-MXGB5 et SP-MXGB5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP-MXGB6

CA-MXGB6

 

 

 

 

 

 

 

 

 

 

SP-MXGB6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP-MXGB5

CA-MXGB5

SP-MXGB5

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

For Customer Use:

Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference.

Model No.

Serial No.

LVT1188-002B [C]

Warnings, Cautions and Others

Mises en garde, précautions et indications diverses

 

 

CAUTION

 

 

 

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

 

DO NOT REMOVE COVER (OR BACK)

 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

ATTENTION

Afin d’éviter tout risque d’électrocution, d’incendie, etc.:

1.Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.

2.Ne pas exposer l’appareil à la pluie ni à l’humidité.

Caution –– STANDBY/ON switch!

Disconnect the mains plug to shut the power off completely. The STANDBY/ON switch in any position does not disconnect the mains line. The power can be remote controlled.

Attention –– Commutateur STANDBY/ON!

Déconnecter la fiche de secteur pour couper complètement le courant. Le commutateur STANDBY/ON ne coupe jamais complètement la ligne de secteur, quelle que soit sa position. Le courant peut être télécommandé.

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

IMPORTANT POUR PRODUITS LASER

1.PRODUIT LASER CLASSE 1

2.ATTENTION: N’ouvrez pas le couvercle supérieur. Il n’y a aucune pièce réparable par l’utilisateur à l’intérieur de l’appareil; confiez toute réparation à un personnel qualifié.

3.ATTENTION: Risque de radiations laser visible et invisible quand l’appareil est ouvert et que le système de verrouillage ne fonctionne pas ou a été mis hors service.

Évitez toute exposition directe au rayon.

4.REPRODUCTION DE L’ÉTIQUETTE: ÉTIQUETTE DE PRÉCAUTION PLACÉE À L’INTERIEUR DE

L’APPAREIL.

G-1

For Canada/pour le Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS

LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQUAU FOND.

For Canada/pour le Canada

THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B

LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING

EQUIPMENT STANDARD ENTITLED “DIGITAL APPARATUS,”

ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS. CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE

BRUITS RADIOELECTRIQUES APPLICABLES AUX APPAREILS

NUMIRIQUES DE CLASSE B PRESCRITES DANS LA NORME SUR LE MATERIEL BROUILLEUR: “APPAREILS NUMERIQUES”,

NMB-003 EDICTEE PAR LE MINISTRE DES

COMMUNICATIONS.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1 Front:

No obstructions and open spacing. 2 Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

3 Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Attention: Aération correcte

Pour prévenir tout risque de décharge électrique ou d’incendie et

éviter toute détérioration, installez l’appareil de la manière suivante: 1 Avant:

Bien dégagé de tout objet. 2 Côtés/dessus/dessous:

Assurez-vous que rien ne bloque les espaces indiqués sur le schéma ci-dessous.

3 Dessous:

Posez l’appareil sur une surface plane et horizontale.Veillez à ce que sa ventilation correcte puisse se faire en le plaçant sur un support d’au moins dix centimètres de hauteur.

Front view

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Side view

 

 

 

Face

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Côté

 

 

 

 

 

 

 

 

 

 

 

 

15 cm

 

 

 

 

 

 

 

 

 

 

15 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(5 15/16 in.)

 

 

 

 

 

 

Cooling fan*

 

(5 15/16 in.)

 

 

 

1 cm

 

 

 

1 cm

 

 

 

 

 

 

 

 

 

15 cm

 

 

 

 

 

 

15 cm

Ventilateur de refroidissement*

 

(7/16

in.)

 

 

(7/16 in.)

 

 

 

 

 

 

 

 

 

 

(5 15/16 in.)

 

 

 

 

(5 15/16 in.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

15 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SP-MXGB6

 

 

 

 

CA-MXGB6

 

SP-MXGB6

 

 

 

 

CA-MXGB6

 

 

 

 

 

 

 

 

 

 

(5 15/16 in.)

 

 

 

 

 

 

 

 

 

 

 

SP-MXGB5

 

 

 

CA-MXGB5

 

SP-MXGB5

 

 

 

 

 

 

 

CA-MXGB5

 

 

 

 

 

 

 

 

10 cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(3 15/16 in.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*About the cooling fan

A cooling fan is mounted on the rear panel of the unit to prevent abnormal temperature inside the unit, thus assuring normal operation of the unit. The cooling fan automatically starts rotating to intake external cool air when the volume is increased up to more than a certain level.

*À propos du ventilateur de refroidissement

Un ventilateur de refroidissement se trouve sur le panneau arrière de l’appareil afin d’éviter la création d’une température anormale à l’intérieur de l’appareil et permettre ainsi un fonctionnement normal de l’appareil. Le ventilateur de refroidissement commence à tourner et à aspirer de l’air frais automatiquement quand le volume est augmenté au-dessus d’un certain niveau.

G-2

English

Introduction

We would like to thank you for purchasing one of our JVC products. Before operating this unit, read this manual carefully and thoroughly to obtain the best possible performance from your unit, and retain this manual for future reference.

About This Manual

This manual is organized as follows:

The manual mainly explains operations using the buttons and controls on the unit. You can also use the buttons on the remote control if they have the same or similar names (or marks) as those on the unit.

If operation using the remote control is different from that using the unit, it is then explained.

Basic and common information that is the same for many functions is grouped in one place, and is not repeated in each procedure. For instance, we do not repeat the information about turning on/off the unit, setting the volume, changing the sound effects, and others, which are explained in the section “Common Operations” on pages 9 to 11.

The following marks are used in this manual:

Gives you warnings and cautions to prevent damage or risk of fire/electric shock.

Also gives you information which is not good for obtaining the best possible performance from the unit.

Gives you information and hints you had better know.

Precautions

Installation

Do not grasp the control knobs when moving or carrying the unit.

Install in a place which is level, dry and neither too hot nor too cold—between 5˚C and 35˚C.

Install the unit in a location with adequate ventilation to prevent internal heat built-up in the unit.

Leave sufficient distance between the unit and the TV.

Keep the speakers away from the TV to avoid interference with TV.

DO NOT install the unit in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

Power sources

When unplugging from the wall outlet, always pull the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

After starting heating in the room

In a damp room

If the unit is brought directly from a cold to a warm place Should this occur, the unit may malfunction. In this case, leave the unit turned on for a few hours until the moisture evaporates, unplug the AC power cord, and then plug it in again.

Others

Should any metallic object or liquid fall into the unit, unplug the unit and consult your dealer before operating any further.

If you are not going to operate the unit for an extended period of time, unplug the AC power cord from the wall outlet.

DO NOT disassemble the unit since there are no user serviceable parts inside.

If anything goes wrong, unplug the AC power cord and consult your dealer.

1

Contents

English

Location of the Buttons and Controls .......................

3

Front Panel .................................................................

3

Remote Control ..........................................................

5

Getting Started ............................................................

6

Unpacking ..................................................................

6

Putting the Batteries into the Remote Control ...........

6

Connecting Antennas .................................................

6

Connecting Speakers ..................................................

7

Connecting Other Equipment .....................................

8

Canceling the Display Demonstration .......................

8

Common Operations ..................................................

9

Turning On or Off the Power .......................................

9

Setting the Clock ........................................................

9

Selecting the Sources...................................................

9

Adjusting the Volume ...............................................

10

Reinforcing the Bass Sound .....................................

10

Enjoying the Powerful Sound—RHYTHM AX .......

10

Selecting the Sound Modes ......................................

11

Turning On or Off the Key-touch Tone ....................

11

Listening to the Radio ..............................................

12

Tuning in to a Station—Auto Search .......................

12

Presetting Stations ....................................................

12

Tuning in to a Preset Station ....................................

12

Playing Back CDs .....................................................

13

Loading CDs ............................................................

13

Playing Back CDs—All Disc and One Disc ............

13

Basic CD Operations ................................................

15

Changing the MP3 Playback Mode..........................

17

Turning On or Off the Resume Play for MP3 Disc ..

17

Programming the Playing Order of the Tracks

 

—Program Play ..................................................

18

Playing at Random—Random Play .........................

19

Repeating Tracks or CDs—Repeat Play ..................

19

Prohibiting Disc Ejection—Carrousel Lock ............

19

Playing Back Tapes ...................................................

20

Playing Back a Tape .................................................

20

Recording ..................................................................

21

Recording a Tape on Deck B ....................................

21

Dubbing Tapes ..........................................................

22

CD Synchronized Recording .....................................

22

Using the Timers .......................................................

23

Using Daily Timer ....................................................

23

Using Recording Timer ............................................

24

Using Sleep Timer ....................................................

25

Timer Priority ...........................................................

25

Maintenance ..............................................................

26

Troubleshooting ........................................................

27

Specifications .............................................................

28

2

English

Location of the Buttons and Controls

Become familiar with the buttons and controls on your unit.

Front Panel

1

 

2

y

3

u

4

 

5

 

6

i

7

o

8

 

9

;

p

a

q

 

w

s

e

d

r

 

t

f

3

 

Continued

Display Window

1

2

3

4

5 6

7

 

GROUP

TRACK

 

MP3

 

 

 

 

0

8

 

 

-

9

 

 

 

REPEAT ALL 1 DISC

=

WOOFER

SOUND

MODE

MONO ST

 

 

 

~

!

English

See pages in the parentheses for details.

Front Panel

1 STANDBY/ON button (9, 24, 25)

2 Standby lamp (9)

3 Carrousel

4 Display window

5 Remote sensor (5)

6REC START/STOP button (21) CD REC START button (22) DUBBING button (22)

7REC lamp (21, 22) SOUND MODE lamp (11) RHYTHM AX lamp (10)

8REPEAT button (13, 15, 19)

PROGRAM (MP3 Resume on/off) button (17, 18) RANDOM button (19)

9SOUND MODE control (11) RHYTHM AX control (10)

pAUX button (9) FM/AM button (9, 12)

CD 6(play/pause) button (9, 13 – 15, 18) TAPE A 3(play) button (9, 20, 22)

TAPE B 3(play) button (9, 20, 22)

Pressing one of these buttons also turns on the unit.

qCLOCK/TIMER button (9, 23 – 25) SET/DISPLAY button (9, 12, 18, 23 – 25) CANCEL/DEMO button (8, 9, 18, 24, 25)

w PHONES jack (10)

eTUNING +/– buttons (12)

¡/ 1(fast forward/fast rewind) buttons (15, 20) r 7(stop) button (13 – 15, 18 – 22)

BEEP button (11)

t Deck A cassette holder (20, 22)

Pressing the 0(open/close) portion opens the holder. y CD 0(Carrousel open/close) button (13 – 15, 17 – 19)

Pressing this button also turns on the unit.

u DISC CHANGE button (13, 15)

iDisc number buttons (CD1, CD2, and CD3) (14, 15, 18, 19, 22)

Pressing one of these buttons also turns on the unit.

o CD READY lamps (CD1, CD2, and CD3) (14) ; SUBWOOFER LEVEL +/– control (10)

a VOLUME control (10) s AUX jack (8)

dPRESET +/– buttons (12)

¢/ 4(forward search/reverse search) buttons (9, 15 – 19, 23 – 25)

fDeck B cassette holder (20 – 22, 24)

Pressing the 0(open/close) portion opens the holder.

Display Window

1Timer indicators

• DAILY (daily timer), SLEEP (sleep timer), REC

(recording timer), and

(timer) indicators

2 GROUP indicator

3 TRACK indicator

4Main display

Shows the source name, frequency, etc. 5 MP3 indicator

6 Tape operation indicators

A/B (operating deck), REC (recording), and 23(tape running) indicators

7 PRGM (program) indicator

8 SOUND MODE indicator

9 WOOFER indicator

0 CD track number indicators - RANDOM indicator

=REPEAT mode indicators

REPEAT, 1, 1 DISC, ALL DISC indicators ~ Tuner operation indicators

MONO and ST (stereo) indicators

!Volume level, Subwoofer level and Sound Mode pattern indicators

4

English

Remote Control

1

w

2

 

3

 

 

e

4

r

5

t

6

y

7

u

i

8

o

9

;

p

a

q

 

When using the remote control, point it at the remote sensor on the front panel.

Remote Control

1 BEEP ON/OFF button (11)

2 SLEEP button (25)

3 Number buttons (12, 16)

4TAPE A 3(play) button (9, 20)

Pressing this button also turns on the unit.

5 VOLUME + button (10)

6FM/AM button (9, 12)

Pressing this button also turns on the unit.

7AUX button (9)

Pressing this button also turns on the unit.

8 SOUND MODE button (11)

94/1(reverse search/fast rewind) button (12, 15 – 17, 19, 20)

p FADE MUTING button (10)

q 7(stop) button (13 – 15, 18 – 22) w STANDBY/ON button (9)

eFM MODE button (12) MP3 button (17)

rTAPE B 3(play) button (9, 20)

Pressing this button also turns on the unit.

t RHYTHM AX button (10)

yCD 6(play/pause) button (9, 13 – 15, 18)

Pressing this button also turns on the unit.

u VOLUME – button (10) i DISC SKIP button (13, 15)

o SUBWOOFER LEVEL + button (10)

;¢/¡(forward search/fast forward) button (12, 15 – 17, 19, 20)

a SUBWOOFER LEVEL – button (10)

5

Getting Started

Unpacking

After unpacking, check to be sure that you have all the following items.

The number in the parentheses indicates the quantity of the pieces supplied.

AM loop antenna (1)

FM antenna (1)

Remote control (1)

Batteries (2)

If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2

R6P(SUM-3)/AA(15F)

3

• DO NOT use an old battery together with a new one.

• DO NOT use different types of batteries together.

DO NOT expose batteries to heat or flame.

DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.

Continued

Connecting Antennas

FM antenna

FM antenna (supplied)

ANTENNA

AM

 

FM

[75

]

 

 

 

1Attach the FM antenna to the FM [75 ] coaxial terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

Outdoor FM antenna (not supplied)

ANTENNA

AM

 

FM

[75

]

 

 

 

A 75 Ω antenna with coaxial type connector should be used.

English

6

English

AM antenna

1

2, 3

 

wire

 

4

 

AM loop antenna

 

(supplied)

1Press and hold the clamp of the AM terminal on the rear of the unit.

2Insert the end of the AM loop antenna cord into the terminal.

If the AM loop antenna wire is covered

with vinyl, remove the vinyl by twisting it as shown in the diagram.

3Release the finger from the clamp.

4Turn the AM loop antenna until you have the best reception.

To connect an outdoor AM antenna

When reception is poor, connect a single vinyl-covered wire to the AM terminal and extend it horizontally. (The AM loop antenna must remain connected.)

For better reception of both FM and AM

Make sure the antenna conductors do not touch any other terminals and connecting cords.

Keep the antennas away from metallic parts of the unit, connecting cords, and the AC power cord.

Connecting Speakers

For MX-GB6:

DO NOT carry the speaker by holding the tube duct (on the top of the speaker).

1

 

2, 3

 

Speaker cord

Black

 

Speaker

(blue/black)

 

 

 

cord

MAIN SPEAKER

SUB WOOFER

(red/black)

[4-8

]

[6 -16

]

 

L

 

 

L

 

R

 

 

R

 

Blue

Black

Red

 

 

 

Speaker cord

 

Speaker cord

(blue/black)

 

 

(red/black)

From right

From right

 

main

 

subwoofer’s

 

speaker’s

terminals

 

terminals

 

 

 

From left

 

 

 

From left

main

 

 

 

subwoofer’s

speaker’s

 

 

 

terminals

terminals

 

 

 

 

1Press and hold the clamp of the speaker terminal on the rear of the unit.

2Insert the end of the speaker cord into the

terminal.

Match the colors (polarity): Blue (+) to blue (+) and black

(–) to black (–); red (+) to red (+) and black (–) to black

(–).

• If the wire is covered with vinyl, remove the vinyl by twisting it as shown in the

diagram.

3 Release the finger from the clamp.

IMPORTANT:

Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.

DO NOT connect more than one speaker to one speaker terminal.

7

Connecting Other Equipment

You can connect audio equipment—used only as a playback device.

• DO NOT connect any equipment while the power is on.

DO NOT plug in any equipment until all connections are complete.

To connect audio equipment

Stereo mini plug cord (not supplied)

Audio equipment

To audio output

English

NOW you are ready to plug in the unit and other connected equipment.

Canceling the Display Demonstration

When connecting the AC power cord into a wall outlet, the unit automatically starts the display demonstration.

On the unit ONLY:

To cancel the display demonstration, press CANCEL/DEMO while the display demonstration is shown on the display.

When you press other buttons

The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it.

To start the display demonstration manually

Press and hold CANCEL/DEMO again for more than 2 seconds.

For playing the other equipment through this unit, connect between the audio output jack on the other equipment and AUX jack on the front of the unit by using a stereo mini plug cord (not supplied).

If the audio output on the other equipment is not

stereo mini plug type

Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output.

8

English

Common Operations

Turning On or Off the Power

To turn on the unit, press STANDBY/ON so that the standby lamp goes off.

To turn off the unit (on standby), press STANDBY/ON again so that the standby lamp lights up.

A little power is always consumed even while the unit is on standby.

To switch off the power supply completely, unplug the AC power cord from the AC outlet.

When you unplug the AC power cord or if a power

failure occurs

The clock is reset to “– – : – –” soon, while the tuner preset stations (see page 12) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.

On the unit ONLY:

1 Press CLOCK/TIMER.

The hour digits start flashing on the display.

2 Press ¢or 4to adjust the hour, then press SET/ DISPLAY.

The minute digits start flashing on the display.

If you want to correct the hour after pressing SET/ DISPLAY, press CANCEL/DEMO. The hour digits start flashing again.

3 Press ¢or 4to adjust the minute, then press SET/DISPLAY.

To check the clock time

Press and hold SET/DISPLAY for more than 2 seconds while playing any source.

To return to the source indication, press SET/DISPLAY.

While the time indication appears on the display

If you press a button or turn a control, the time indication returns to the source indication.

To adjust the clock again

If you have adjusted the clock before, you need to press CLOCK/TIMER repeatedly until “CLOCK” is selected.

Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME REC

(Daily Timer)

Canceled CLOCK ON TIME

(Recording Timer)

If there is a power failure

The clock loses the setting and is reset to “– – : – –.” You need to set the clock again.

Selecting the Sources

To listen to the radio, press FM/AM. (See page 12.) To play back CDs, press CD 6. (See pages 13 – 19.)

To play back tapes, press TAPE A 3or TAPE B 3. (See page 20.)

To select the external equipment as the source, press AUX.

When you press the play button for a particular source (AUX, FM/AM, CD 6, TAPE A 3, and TAPE B 3), the unit turns on (and the unit starts playing the source if it is ready— COMPU PLAY CONTROL).

9

Continued

Adjusting the Volume

Reinforcing the Bass Sound

 

 

 

You can adjust the volume level only while the unit is turned on.

This function only affects the playback sound, not your recording.

Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it.

The volume level can be adjusted in 32 steps (VOL MIN, VOL 1 — VOL 30, and VOL MAX).

When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on headphones.

Always set the volume to the minimum before starting any source. If the volume is set to extremely high level, a sudden blast of sound can damage your hearing, speakers and/or headphones.

If you have turned off (on standby) the unit with the volume level set at more than level “15,” the volume level will be automatically set at level “15” next time you turn on the unit.

To turn down the volume level temporarily

Press FADE MUTING on the remote control. The volume level gradually decreases to “VOL MIN.”

To restore the sound, press the button again.

This function only affects the playback sound, not your recording.

Press down the SUBWOOFER LEVEL +/– control to increase the subwoofer sound or up the control to decrease it.

The subwoofer level can be adjusted in 3 steps (LEVEL 1 — LEVEL 3).

If you press down the control to increase the

level beyond LEVEL 3, “MAX LEVEL” appears on the display.

WOOFER indicator also shows the current subwoofer level.

WOOFER

When using the remote control, press SUBWOOFER LEVEL + to increase the subwoofer sound or press SUBWOOFER LEVEL – to decrease it.

Enjoying the Powerful Sound—RHYTHM AX

Using RHYTHM AX, harder-hitting beats intensify your listening experience even at low sound levels.

RHYTHM AX also works even when the song has no “beat,” such as classical music, so that you can listen to the rich sound even at low sound levels.

This function only affects the playback sound, not your recording.

Press down the RHYTHM AX control.

“RHYTHM AX” (twice), then “ON” appears on the display.

Each time you press down the control, RHYTHM AX turns on and off alternately.

The RHYTHM AX lamp also lights up.

WOOFER

English

When using the remote control, press RHYTHM AX.

Each time you press the button, RHYTHM AX turns on and off alternately.

10

English

Selecting the Sound Modes

This function only affects the playback sound, not your recording.

You can select one of the 6 preset sound modes (3 surround modes and 3 SEA—Sound Effect Amplifier—modes).

To select the sound modes, press up the SOUND MODE control repeatedly until the sound mode you want appears on the display.

• The SOUND MODE lamp also lights up.

WOOFER

SOUND

 

MODE

SOUND MODE indicator also lights up on the display

First time you press up the control, the current sound mode appears on the display.

Each time you press up the control while a sound mode appears on the display, the sound modes change as follows:

D.CLUB HALL STADIUM ROCK

(Dance CLUB)

OFF CLASSIC POP

(Canceled)

Surround modes*:

D.CLUB : Increases resonance and bass.

HALL : Adds depth and brilliance to the sound. STADIUM: Adds clarity and spreads the sound, like in an

outdoor stadium.

SEA (Sound Effect Amplifier) modes:

ROCK : Boosts low and high frequency. Good for acoustic music.

POP : Good for vocal music. CLASSIC : Good for classical music.

OFF : Cancels the sound mode.

*Surround elements are added to the SEA elements to create being-there feeling in your room.

When one of these modes is selected, the SOUND MODE

indicator lights up as SOUND .

MODE

While one of the SEA modes (SEA elements without surround elements) is selected, the SOUND MODE indicator lights up

as SOUNDMODE .

When using the remote control, press SOUND MODE to select the sound mode.

First time you press the button, the current sound mode appears on the display.

Each time you press the button while a sound mode appears on the display, the sound modes change as follows:

D.CLUB HALL STADIUM ROCK

(Dance CLUB)

OFF

 

CLASSIC

 

POP

(Canceled)

 

 

 

 

 

 

Turning On or Off the Key-touch Tone

If you do not want the key-touch tone to beep each time you press a button or turn a control, you can deactivate it.

You can turn on or off the key-touch tone as follows:

When the unit is off:

You can turn on or off the key-touch tone by operating the unit.

When the unit is on:

You can turn on or off the key-touch tone by operating the unit or the remote control.

On the unit:

Press and hold BEEP for more than 2 seconds.

Each time you press and hold the button, the key-touch tone turns on and off alternately.

On the remote control:

Press BEEP ON/OFF when the unit is on.

Each time you press the button, the key-touch tone turns on and off alternately.

11

Listening to the Radio

Tuning in to a Station—Auto Search

1 Press FM/AM.

The unit automatically turns on and tunes in to the previously tuned station (either FM or AM).

Each time you press the button, the band alternates between FM and AM.

2 Start searching for stations. On the unit:

Press and hold TUNING + or TUNING – for more than 1 second.

On the remote control:

Press and hold ¢/¡or 4/1for more than 1 second.

The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in to.

If a program is broadcast in stereo, the ST (stereo) indicator lights up.

To stop during searching, press TUNING + or TUNING – (or ¢/¡or 4/1on the remote control).

When you press TUNING + or TUNING –

(or ¢/¡or 4/1on the remote control) briefly

and repeatedly

The frequency changes step by step.

To change the FM reception mode

When an FM stereo broadcast is hard to receive or noisy, press FM MODE on the remote control so that “MONO” appears and the MONO indicator also lights up on the display. Reception improves.

To restore the stereo effect, press FM MODE again so that

“STEREO” appears on the display.

In this stereo mode, you can hear stereo sounds when a program is broadcast in stereo.

Presetting Stations

You can preset 30 FM and 15 AM stations.

In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.

On the unit ONLY:

1 Tune in to the station you want to preset (in this example, of FM 87.50).

• See “Tuning in to a Station—Auto Search.”

2 Press SET/DISPLAY.

3 Press PRESET + or PRESET – to select a preset number.

4 Press SET/DISPLAY again.

The tuned station in step 1 is stored in the preset number selected in step 3.

Storing a new station on a used number erases the previously stored one.

When you unplug the AC power cord or if a power

failure occurs

The preset stations will be erased in a few days. If this happens, preset the stations again.

Tuning in to a Preset Station

1 Press FM/AM.

The unit automatically turns on and tunes in to the previously tuned station (either FM or AM).

Each time you press the button, the band alternates between FM and AM.

2 Select a preset number. On the unit:

Press PRESET + or PRESET –.

On the remote control:

Press the number buttons.

Ex.: For preset number 5, press 5. For preset number 15, press +10 then 5.

For preset number 20, press +10, then 10.

For preset number 25, press +10, +10, then 5. For preset number 30, press +10, +10, then 10.

12

English

English

Playing Back CDs

This unit has been designed to playback the following CDs:

Audio CD

CD-R (CD-Recordable)

CD-RW (CD-ReWritable)

MP3 disc (MP3 files recorded on a CD-R or CD-RW)*

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already “finalized.”

Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

In general, you will have the best performance by keeping your CDs and the mechanism clean.

-Store CDs in their cases, and keep them in cabinets or on shelves.

-Keep the unit’s carrousel closed when not in use.

Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs.

*For MP3 discs

This unit manages files and folders on MP3 discs as “tracks” and “albums.”

Playback order of the MP3 files (tracks) recorded on a disc are determined by the writing (or encoding) application; therefore, playback order may be different from the one you have intended while recording the files and the folders.

This unit shows the file (track) names and the ID3v1/1.1 tags (only “Title” and “Artist”) on the display after the file starts play; however, there is a limitation on available characters and some file names and ID3v1/1.1 tags are not shown correctly.

More about MP3 discs

MP3 discs (either CD-R or CD-RW) require a longer readout time. (It varies due to the complexity of the recording configuration.)

When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as the disc format.

This unit does not support multisession recording.

This unit can play MP3 files only with the following file extensions— “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”

Non-MP3 files are ignored. If non-MP3 files are recorded together with MP3 files, this unit will take a longer time to scan the disc. It may also cause the unit to malfunction.

Some MP3 discs may not be played back because of their disc characteristics or recording conditions.

Loading CDs

1 Press CD 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front recesses of the disc tray, with its label side up.

CORRECT

INCORRECT

When using a CD single (8 cm), place it on the inner recess of the disc tray.

3 If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control.

The disc tray rotates by 120˚.

4 Press CD 0again.

The carrousel closes.

Playing Back CDs—All Disc and One Disc

You can play all loaded CDs continuously—All Disc play, or one selected disc—One Disc play.

All Disc play

On the unit ONLY:

1 Load CDs.

If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press REPEAT repeatedly so that the ALL DISC indicator lights up on the display.

For Audio CD:

Total playing time

 

TRACK

 

WOOFER

 

ALL DISC

 

 

Total Track number

ALL DISC indicator

For MP3 disc:

 

MP3 indicator

GROUP

 

MP3

WOOFER

 

ALL DISC

 

 

GROUP indicator appears when the MP3 playback mode is the ALBUM mode. See also page 17.

13

Each time you press the button, the indication on the display changes as follows:

 

 

ALL DISC

 

1 DISC

 

REPEAT 1*

 

 

 

 

 

 

(initial setting)

 

 

 

 

 

 

 

REPEAT ALL DISC

 

REPEAT 1 DISC

 

 

* See page 19.

3 Press one of the disc number buttons (CD1, CD2 or CD3) for the disc you want to start to play from.

CD play starts from the first track of the selected disc.

Pressing CD 6instead of the disc number buttons starts playing back if a CD is on the tray.

For Audio CD:

Track number of the currently playing disc flashes (Track numbers exceeding 16 are not displayed.)

TRACK

WOOFER

 

ALL DISC

 

 

 

 

 

Current track number Elapsed playing time

For MP3 disc:

When the MP3 playback mode is the ALBUM mode

(See also page 17.)

Current album number

GROUP

MP3

WOOFER

ALL DISC

 

Current track title scrolls.

GROUP

MP3

Continued

When the MP3 playback mode is the TRACK mode

(See also page 17.)

Current track title scrolls.

 

MP3

WOOFER

ALL DISC

 

When the track includes the ID3v1/1.1 tags, “Title” and “Artist” will scroll after the track title.

<TITLE>” appears before the content of “Title” scrolls and “<ARTIST>” appears before the content of “Artist” scrolls.

Current track number** Elapsed playing time

 

MP3

WOOFER

ALL DISC

 

**In the TRACK mode, the unit manage only files (tracks) on the MP3 disc. Folders (albums) are not recognized.

To stop during play, press 7.

For MP3 disc, this unit can store the number of the track that you have stopped playback. By pressing CD 6, you can start playback again from the beginning of the same track—Resume play (see also page 17).

To remove the disc, press CD 0.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

When CD1 is pressed : CD1 ]CD2 ]CD3 (then stops)

When CD2 is pressed : CD2 ]CD3 ]CD1 (then stops)

When CD3 is pressed : CD3 ]CD1 ]CD2 (then stops)

* When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

WOOFER

ALL DISC

 

When the track includes the ID3v1/1.1 tags, “Title” and “Artist” will scroll after the track title.

<TITLE>” appears before the content of “Title” scrolls and “<ARTIST>” appears before the content of “Artist” scrolls.

Current track number

Elapsed playing time

of the current album

GROUP

MP3

About the CD READY lamps (CD1, CD2, and CD3)

Each lamp corresponds to the disc tray of the same number.

The CD READY lamp flashes while the corresponding CD is being played.

The CD READY lamp goes off when the unit has detected that there is no CD on the corresponding disc tray.

WOOFER

ALL DISC

 

English

14

English

One Disc play

When 2 or 3 CDs are loaded on the disc trays, you can select one particular disc to be played back.

On the unit ONLY:

1 Load CDs.

If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press REPEAT repeatedly so that the 1 DISC indicator lights up on the display.

1 DISC indicator

TRACK

WOOFER

1 DISC

 

Each time you press the button, the indication on the display changes as follows:

ALL DISC

 

1 DISC

 

REPEAT 1*

 

 

(initial setting)

REPEAT ALL DISC* REPEAT 1 DISC*

* See page 19.

3 Press one of the disc number buttons (CD1, CD2 or CD3) you want to listen.

Playback stops when all tracks of the selected disc are played once and resumes to All Disc play.

To stop during play, press 7.

For MP3 disc, this unit can store the number of the track that you have stopped playback. By pressing CD 6, you can start playback again from the beginning of the same track—Resume play (see also page 17).

To remove the disc, press CD 0.

To exit from One Disc play, press REPEAT repeatedly so that ALL DISC indicator lights up on the display.

The following operations will also cancel the One

Disc play and restore All Disc play when—

Stopping playback,

Turning off the power,

Ejecting the carrousel, or

Changing the source to play.

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

Press DISC CHANGE to change the CD and the carrousel comes out.

If you change CDs during play, the current play will not stop until all CDs you have changed are played.

To close the carrousel, press DISC CHANGE or CD 0.

To skip to the another CD in the carrousel

Press DISC SKIP on the remote control.

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on the display.

To resume play, press CD 6again.

To locate a particular point in a track

During play, press and hold ¡or

1.

• ¡: Fast forwards the disc.

• 1: Fast reverses the disc.

When using the remote control, press and hold ¢/¡or 4/1.

To go to another track

For Audio CD:

Press ¢or 4before or during playback.

¢: Skips to the beginning of the next or succeeding tracks.

4: Goes back to the beginning of the current or previous tracks.

When using the remote control, press ¢/¡or 4/1.

If you press ¢or 4(or ¢/¡or 4/1on the

remote control) to select a track while playback is

stopped

The selected track starts playback.

15

Loading...
+ 42 hidden pages