JVC AV-25VS21, AV-21WX11, AV-21YX11, AV-21VS21, AV-25VX71 User Manual

...
0 (0)

COLOUR TELEVISION

INSTRUCTIONS

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

Sseries:

AV-21VS21 AV-21WS21

AV-25VS21

AV-29VS21

AV-29WS21

Xseries:

AV-21VX71 AV-21WX11 AV-21YX11 AV-25VX71 AV-29VX71 AV-29WX11

Contents

 

Safety precautions

2

Preparation

2

1 Insert the batteries into the remote control

.. 2

2 Connecting the aerial and VCR ......................

3

3 Connecting other devices ...............................

4

4 Connect the power cord to the AC outlet ......

4

5 SETUP TOUR ...................................................

5

Basic operation

6

Remote control buttons and functions

7

MUTING button ..................................................

8

PICTURE BOOSTER button ................................

8

COLOUR SYSTEM button ..................................

8

SOUND SYSTEM button ....................................

8

CINEMA SURROUND button .............................

8

DISPLAY button ..................................................

9

ECO SENSOR button ..........................................

9

button ....................................................

9

OFF TIMER button ..............................................

9

PICTURE MODE button ....................................

10

CHANNEL SCAN button ..................................

10

FAVORITE CH button ........................................

10

RETURN + button .............................................

10

PIP buttons ........................................................

11

Viewing Teletext programmes

13

Using the TV’s menus

15

Basic operation .................................................

15

INPUT ................................................................

16

PICTURE TILT ....................................................

16

VNR ....................................................................

16

COMPRESS (16:9) .............................................

16

AUTO SHUTOFF ...............................................

17

CHILD LOCK ......................................................

17

BLUE BACK .......................................................

17

VIDEO-2 SET .....................................................

18

Picture Adjustments .........................................

18

Sound Adjustments .........................................

18

AI VOLUME .......................................................

19

AUTO CH PRESET ............................................

19

MANUAL CH PRESET ......................................

20

SKIP ...................................................................

21

LANGUAGE .......................................................

21

TEXT LANGUAGE ............................................

21

FAVORITE CH SETTING ....................................

22

VIDEO SETTING ................................................

22

AI ECO SENSOR ...............................................

23

AI ECO DISPLAY ...............................................

23

PIP ......................................................................

23

TV buttons and parts

24

Using the buttons on the TV

25

Troubleshooting

26

Specifications

27

GGT0012-001C-H

© 2003 VICTOR COMPANY OF JAPAN, LIMITED

0403-NIC-JMT

Safety precautions

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.

•Operate only from the power source specified on the TV. •Avoid damaging the power cord and main

plug. When you unplug the TV, pull it out by

 

 

 

 

 

 

 

 

 

 

 

the main plug. Do not pull on the power cord.

 

 

 

 

 

 

 

 

 

15 cm

•Never block or cover the cabinet opening for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ventilation. Never install the TV where good

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ventilation is unattainable. When installing

 

 

 

 

 

 

 

 

 

 

 

this TV, leave spaces for ventilation around the

 

 

10 cm

 

10 cm

 

15 cm

 

 

 

 

 

TV more than the minimum distances shown in the diagram.

•Do not allow objects or liquid into the cabinet openings.

•In the event of a fault, unplug the TV and bring to JVC service centre. Do not attempt to repair it by yourself or remove the rear cover.

•The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

•When you don’t use this TV for a long period of time, be sure to disconnect the power plug from the AC outlet.

•The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

WARNING

<AV-21WS21/AV-21WX11/AV-21YX11 only>

A removable plastic cover is fixed to the television’s front Audio/Video connector. To prevent this cover from being accidentally swallowed by babies or children, remove it from the television and store it in a safe place. If the cover is swallowed seek the advice of a doctor immediately.

Preparation

1 Insert the batteries into the remote control

Correctly insert two batteries, observing the , and . polarities and inserting the . end first.

CAUTION:

Follow the cautions printed on the batteries.

Notes:

Use AA/R6/UM-3 dry cell batteries.

If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use.

2

Preparation

2Connecting the aerial and VCR

Read the manuals provided with the devices. Depending on the device, the connection method may be different from the diagrams. Also the device settings may need to change depending on the connection method.

Turn off all the devices including the TV.

Connecting cables are not supplied.

When connecting monaural audio to the TV, use the L/MONO jack.

You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C signal). In that case, do not connect it to the TV with a video cable.

If you connect the VCR to the TV only with an aerial cable, you should preset the video channel from the VCR to the AV channel (channel number 0) on this TV. See “MANUAL CH PRESET” on page 20 and preset it manually.

Connecting the aerial

VIDEO-1

COMPONENT

 

(VIDEO-2)

OUTPUT

INPUT

INPUT

 

 

 

S

 

 

VHF/UHF outdoor aerial

OVER

V

Y/V

 

V

L/MONO CB

L/ MONO L

R

CR

R

R

Connecting the aerial and VCR

VHF/UHF outdoor aerial

 

 

 

VIDEO-1

COMPONENT

 

 

 

 

 

 

(VIDEO-2)

OUTPUT

 

 

 

 

INPUT

 

 

 

 

 

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

 

S

 

 

 

 

 

 

 

OVER

 

 

 

 

 

 

 

V

Y/V

 

V

 

 

3

 

L/MONO

CB

L/ MONO L

 

 

 

 

R

CR

R

R

2

 

 

 

 

 

 

 

To video

To audio

To RF

 

 

 

 

output

 

output

 

 

 

 

 

output

 

 

 

 

 

 

 

 

 

 

 

To S-video

 

 

 

 

 

 

 

output

VCR

To aerial input 1

 

 

 

 

 

 

 

 

 

3

Preparation

3 Connecting other devices

If you are not connecting any other devices, skip step 3 and perform step 4.

Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal.

(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it cannot output any signals when the TV is turned off.)

Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player, to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 18.)

The following illustrations are for the AV-21VX71. Your TV’s front and rear panels may not look exactly like the illustrations.

Front

Camcorder or TV game

Headphones

Rear

VIDEO-1

COMPONENT

 

 

(VIDEO-2)

OUTPUT

INPUT

 

 

INPUT

 

 

 

 

S

 

 

 

OVER

 

 

 

V

Y/V

 

V

L/ MONO

CB

L/ MONO L

VCR (for playing)

DVD player

(composite signals)

VCR (for recording)

R

CR

R

R

DVD player

(component video signals)

4 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.

4

(For AV-21WX11, AV-29WX11

Preparation

5 SETUP TOUR

When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.

In case of resetting that the reason for such as removal, you can set the AUTO CH PRESET function on the “MENU 3” menu. For details, see page 19.

1Press the Main power button on the TV.

The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.

SETUP TOUR

2Press the CHANNEL –/+ or the MENU / buttons to select the on-screen language.

POWER lamp

Main power button

 

SYSTEM

CINEMA

PIP

 

COLOUR SOUND SURROUND

DISPLAY

 

 

ECO

DISPLAY

SENSOR

button

 

 

 

 

 

MENU

MENU t

MENU /

 

buttons

 

 

buttons

Ι/ΙΙ

TV/TEXT

 

TV/VIDEO

 

 

 

1

2

3

 

OFF

 

 

 

TIMER

5

6

 

4

PICTURE

MODE

SETUP TOUR

LANGUAGE

ENGLISH

NEXT

 

OPERATE BY -+

EXIT BY

DISPLAY

3Press the CHANNEL –/+ or the MENU / buttons to select the

teletext language group. For details, see page 21.

and AV-21YX11 series will skip this step.)

SETUP TOUR

TEXT LANGUAGE

GROUP-1

NEXT

 

 

EXIT BY

OPERATE BY -+

DISPLAY

7 8 9

CHANNEL RETURN+ SCAN

0 -/--

CHANNEL VOLUME

CHANNEL –/+ buttons

To stop the AUTO PROGRAMMING

function, press the CHANNEL m or the MENU / buttons.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.

If a TV channel you want to view is not set to the channel, set it with the MANUAL CH PRESET function. For details, see page 20.

4The AUTO PROGRAMMING function will start and the indicator blinks.

SETUP TOUR

NOW PROGRAMMING

5Upon the completion of AUTO PROGRAMMING function, the message below is displayed.

SETUP TOUR

THANK YOU!

STOP BY -+

5

Basic operation

Your remote control may not look exactly like the illustration.

PICTURE

MUTING BASS BOOSTER POWER

SYSTEM

CINEMA

COLOUR SOUND SURROUND PIP

 

ECO

DISPLAY

SENSOR

 

MENU

Ι/ΙΙ

TV/TEXT

TV/VIDEO

1 2 3

OFF

TIMER

4 5 6

PICTURE

MODE

7 8 9

CHANNEL RETURN+ SCAN

0 -/--

CHANNEL VOLUME

FAVORITE CH

S UB ?

 

5

i

5

 

S

UB+ 5

 

5

C.SYSMODE

TV

Note: For the function buttons available for your TV set, please refer to which Remote Control you have (See page 7 for details).

1Press the POWER button to turn your TV on.

If your TV does not turn on, press the Main power button on the TV then press the POWER button again.

You can also turn on your TV by pressing any of the following buttons;

-the CHANNEL m button

-the Number buttons

-the TV/VIDEO button

2Select a channel.

■Press the CHANNEL m button.

Up/down selection cannot be selected for channels to which the SKIP has been set to “YES”. See page 21.

Press the Number buttons to enter the channel number.

If you want to enter a two-digit number, press the -/-- button to select the two digit mode “--”, then enter the channel number.

3Press the VOLUME M button to adjust the sound.

4To turn your TV off, press the POWER button.

We recommend that you press the Main power button on the TV to turn the main power off if you do not plan to use your TV for a long time or if you wish to save energy.

If the picture is not clear:

Press the COLOUR SYSTEM button to select another colour system, see page 8.

If the sound is not clear:

Press the SOUND SYSTEM button to select another sound system, see page 8.

Viewing Images from an External Device:

Press the TV/VIDEO button to select the VIDEO mode.

You can also use the INPUT function to select the VIDEO mode. For details, refer to page 16.

6

JVC AV-25VS21, AV-21WX11, AV-21YX11, AV-21VS21, AV-25VX71 User Manual

Remote control buttons and functions

Cross Reference table for TV set and Remote Control

TV set

REMOTE CONTROL

MUTING

PICTURE BOOSTER

COLOUR SYSTEM

SOUND SYSTEM

CINEMA SURROUND

DISPLAY

ECO SENSOR

Ι/ΙΙ

TV/VIDEO

OFF TIMER

PICTURE MODE

CHANNEL SCAN

FAVORITE CH

RETURN+

 

SUB +/–

 

 

SWAP

 

PIP

INPUT

 

C.SYS

 

 

 

 

FREEZE

 

POSITION

 

REVEAL ?

 

HOLD

5

 

 

5

TV/TEXT

INDEX

i

SIZE 55

 

 

 

 

SUBPAGE

 

STORE

 

 

MODE

 

 

CANCEL

AV-21VS21

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AV-21WS21

AV-21VX71

AV-21WX11

 

Refer to

 

AV-25VS21

AV-25VX71

AV-29WX11

AV-21YX11

page no.

 

AV-29VS21

AV-29VX71

 

 

 

 

 

AV-29WS21

 

 

 

 

 

 

RM-C1301

RM-C1302

RM-C1306

RM-C1310

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

 

 

8

 

 

8

 

 

8

 

 

9

 

 

9

 

 

 

 

 

 

 

 

9

 

 

6

 

 

9

 

 

 

 

 

 

 

 

10

 

 

 

 

10

 

 

 

 

 

 

 

 

10

 

 

 

 

 

 

 

 

10

 

 

11

 

 

 

 

 

11

 

 

11

 

 

12

 

 

 

 

 

12

 

 

 

 

 

12

 

 

 

 

 

14

 

 

 

 

 

 

14

 

 

 

 

 

 

14

 

 

 

 

 

 

14

 

 

 

 

 

 

14

 

 

 

 

 

 

14

 

 

 

 

 

 

13

 

 

 

 

 

 

14

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Remote control buttons and functions

MUTING button

You can turn the sound off instantly.

Press this button.

To turn the sound on, press this button again.

PICTURE BOOSTER button

<AV-21YX11 only>

When the picture is unclear because the reception level of the TV signal is low, activating the Picture Booster improves the picture clarity in some situations. Repeatedly press the PICTURE BOOSTER button to select the desired mode.

HIGH:

The Picture Booster is functioning at maximum.

LOW:

The Picture Booster is functioning at minimum.

OFF:

The Picture Booster is off.

If the picture becomes abnormal when you set the Picture Booster to HIGH, then set it to

LOW or OFF.

COLOUR SYSTEM button

If the picture is not clear or no colour appears, change the current colour system to another colour system.

Press this button to select the colour system.

AUTO PAL SECAM NTSC4.43 NTSC3.58

AUTO:

Automatic colour system selection.

For the colour systems in each country or region, see the table “Broadcasting systems” on page 27.

If the picture is not normal in the AUTO mode, change the AUTO mode to another colour system.

SOUND SYSTEM button

If the sound is not clear even when the picture appears normal, change the current sound system to another sound system.

Press this button to select the sound system.

B/G I D/K M

For the sound systems in each country or region, see the table “Broadcasting systems” on page 27.

You cannot select any sound system when in a VIDEO mode.

CINEMA SURROUND button

You can enjoy an enhanced sound for a wider audience by using CINEMA SURROUND function.

Press this button to select one of the CINEMA SURROUND mode.

HIGH/LOW:

When you listen to the stereo sound, please select HIGH mode or LOW mode. You can enjoy the sound for a wider audience similar to the experience at the theatre.

In case that you setting up the CINEMA SURROUND function to HIGH mode, there may be slight volume distortion. In case that occurs, please switch the HIGH mode to LOW mode, the effect of CINEMA SURROUND functions will be less noticeable, however, the volume distortion will be corrected.

MONO SURROUND:

Select the MONO SURROUND mode, when you listen to the mono sound. You can enjoy the sound for a wider audience similar to stereo sound.

OFF:

The CINEMA SURROUND function switches off.

8

Remote control buttons and functions

DISPLAY button

You can continuously display the current channel number or VIDEO mode on the screen.

Press this button.

To turn the display off, press this button again.

When selecting a VIDEO mode with no signal, indication of the VIDEO mode becomes fixed on the screen.

ECO SENSOR button

You can adjust this TV so that the screen automatically adjusts to the optimum contrast according to the brightness of your room. This function reduces eye strain and the power consumption of this TV.

Press this button to select the desired mode.

AI ECO SENSOR 1:

The AI ECO SENSOR function switches on.

Usually, it is recommended to watch the TV in this mode.

AI ECO SENSOR 2:

The AI ECO SENSOR function switches on.

If you feel the screen in the “AI ECO SENSOR 1” mode is too dark, select this mode.

AI ECO SENSOR OFF:

The AI ECO SENSOR function switches off.

You can display on the screen the effect of the AI ECO SENSOR function.

For details, see “AI ECO DISPLAY” on page 23.

button

<S series only>

You can select a sound setting for stereo broadcast programmes and bilingual programmes.

Press this button to select a sound setting.

: Stereo sound

: Bilingual I (sub I) sound

: Bilingual II (sub II) sound

: Monaural sound

MONO : Cancels the multi-sound function, and the sound becomes monaural.

If you have poor reception of a stereo

broadcast, you can change from stereo sound ( ) to monaural sound () so that you can hear the broadcast more clearly and easily.

If the multi-sound function cannot work normally due to poor signal quality, noise may be included in the sound, or the sound may change many times. If this happens, change the sound setting to MONO mode to cancel the multi-sound function.

OFF TIMER button

You can set the TV to automatically turn off after a set time.

Press this button to select the period of time.

You can set the period of time to a maximum of 120 minutes in 10 miniute increments.

1 minute before the OFF TIMER function turns off the TV, “GOOD NIGHT!” appears.

To display the remaining time, press this button once.

To cancel the OFF TIMER function, press this button to set the period of time to 0.

The OFF TIMER function will not turn off the TV’s main power.

9

Remote control buttons and functions

PICTURE MODE button

You can select one of three picture adjustment settings as you like.

Press this button to select a mode.

BRIGHT:

Heightens contrast and sharpness.

STANDARD:

Standardizes picture adjustments.

SOFT:

Softens contrast and sharpness.

Pressing this button returns all the picture settings in “MENU 4” to their default settings.

CHANNEL SCAN button

You can quickly view all TV channels programmes that you can view on your TV, and search for the programme you want to view.

1Press this button to start scanning TV channels.

The TV channel programmes are each displayed for several seconds.

The programmes of TV channels for which the SKIP function is set to “YES” are not displayed.

2When you find the programme you want to view, press this button again to stop scanning.

FAVORITE CH button

You can correlate 4 channels out of 99 channels (PR01-PR99) with FAVORITE CH buttons RED, GREEN, YELLOW and BLUE.

When not in TEXT mode, press one of the FAVORITE CH buttons for more than 3 seconds to correlate currently watching channel. After the channel and button are correlated, you can directly select favorite channel by the correlated button.

When MENU is displayed, FAVORITE CH cannot be correlated.

Correlation of FAVORITE CH button and the channel cannot be reset eventhough the main power is turned off.

RETURN + button

You can set a channel you frequently view to the Return Channel and you can view that channel at any time with one-touch.

To set the channel to the Return Channel:

1Select the channel you want to set to the Return Channel.

2Press this button and hold until the message “RETURN PLUS PROGRAMMED!” appears.

When you turn off the TV, the Return Channel setting is canceled.

To view the Return Channel:

Press this button.

You can view two channels (current channel and Return Channel) alternately by pressing this button.

To cancel the Return Channel setting:

Press this button and hold until the message “RETURN PLUS CANCELED!” appears.

If no channel is set to the Return Channel:

You can view the channel selected right before the current channel by pressing this button.

10

Remote control buttons and functions

PIP button

You can display sub-picture on top of main-picture.

Press this button to display subpicture.

When PIP button is pressed while sub-picture is displayed, sub-picture is closed.

When TV/TEXT button is pressed while sub-picture is displayed, sub-picture is closed and TEXT screen is displayed.

Only the sound for main-picture is audible using the headphone and the sound for subpicture is not audible.

When PIP button is pressed while the main-picture input soure is the same as the last sub-picture input source, the input source of sub-picture is automatically changed to the next input source.

When PIP button is pressed while BLUE BACK function is on and main-picture is not receiving TV signal, BLUE BACK function is disabled.

When PIP button is pressed while MENU is displayed, MENU is closed and main-picture together with sub-picture on top are displayed.

PIP button cannot operate in COMPRESS(16:9) mode.

SUB +/– button

When the input source of sub-picture is TV mode and sub-picture is displayed, you can change the channel of sub-picture by this button.

When the input source of sub-picture is TV mode, pressing of SUB +/– button to effect up/down of channel.

When the input source of sub-picture is other than TV mode, SUB +/– button is disabled.

SWAP ( ) button

You can swap the input source of main and sub-pictures by this button while sub-piture is displayed.

Press this button to swap the input source of main and sub-pictures so that the image of sub-picture is displayed on main-picture and vice-versa.

INPUT ( ) button

You can select the input source of sub-picture by this button.

Press this button repeatedly to select the desired input source.

Depending on the input source of main-picture, each press of INPUT button changes the input source of sub-picture as follows:

Main-picture: TV mode

VIDEO-1 VIDEO-2 VIDEO-3

Main-picture: VIDEO-1

TV mode VIDEO-2 VIDEO-3

Main-picture: VIDEO-2

TV mode VIDEO-1 VIDEO-3

Main-picture: VIDEO-3

TV mode VIDEO-1 VIDEO-2

When the input source of main-picture is set to VIDEO-2 with COMPONENT, PIP button is disabled and sub-picture cannot be displayed.

When the input source of main-picture is other than VIDEO-2 and VIDEO-2 is set to COMPONENT, the input source of sub-picture cannot select VIDEO-2.

If main picture and sub-picture are of different colour systems, there will be some difference in the size of the sub-picture and flicker may take place.

11

Remote control buttons and functions

C.SYS button

If the sub-picture is not clear or no colour appears, change the current colour system to another colour system.

• Press this button to select the colour system.

SUB AUTO SUB PAL SUB SECAM

SUB NTSC4.43 SUB NTSC3.58

About each selected mode, see “COLOUR SYSTEM button” on page 8.

When the input of sub-picture is changed to VIDEO mode, the colour system of sub-picture is automatically set to AUTO mode.

When the input of sub-picture is TV mode, the colour system of sub-picture depends on the colour system of each channel.

FREEZE ( ) button

You can stop the motion of picture (FREEZE status) using this button.

When FREEZE button is pressed while subpicture is displayed, the motion of sub-picture is stopped (FREEZE status).

When any available button is pressed during sub-picture is in FREEZE status, the motion of sub-picture returns to normal, otherwise, the sub-picture remains at FREEZE status.

When sub-picture is not displayed, FREEZE button is disabled.

POSITION ( ) button

You can move the position of sub-picture to either bottom left, top left, top right or bottom right by this button.

When PIP is pressed, sub-picture is displayed at the last displayed position. Each press of POSITION button changes the displayed position of sub-picture.

12

Viewing teletext programmes

TIMER

4

 

5

6

 

PICTURE

 

 

 

 

 

 

 

MODE

7

 

8

9

 

CHANNEL

 

 

RETURN+

 

 

 

SCAN

 

 

0

-/--

 

 

 

 

 

CHANNEL

 

VOLUME

 

 

FAVORITE CH

 

Coloured

 

 

 

 

 

SUB – ?

SUB +

5

i

5

buttons

5

5

SIZE

REVEAL

 

 

 

 

HOLD

 

 

MODE

 

INDEX

C.SYS

 

 

 

 

SUBPAGE

 

 

 

 

CANCEL

STORE

TV

Basic operation

1Select a TV channel with a teletext programme.

2Press the TV/TEXT button to change the TV mode to the teletext mode.

The mode cycles as follows:

TV mode TEXT mode (TEXT only) MIX mode (TV and TEXT)

3Select a teletext page by pressing the CHANNEL –/+ button, Number buttons or coloured buttons.

To return to the TV mode, press the TV/ VIDEO button or the TV/TEXT button.

If you have trouble receiving teletext broadcasts, consult your local dealer or the teletext station.

If characters on a teletext programme do not appear properly, change the TELETEXT LANGUAGE setting. For details, see “TEXT LANGUAGE” on page 21.

Using the List Mode

You can store the numbers of your favorite teletext pages in the List mode and call them up quickly using the coloured buttons.

To store the page numbers:

1Press the MODE button to engage the List mode.

The stored page numbers are displayed at the bottom of the screen.

2Press a coloured button to select a position. Then press the Number buttons to enter the page number.

3Press and hold down the STORE button.

The four page numbers blink white to indicate that they are stored in memory.

To call up a stored page:

1Press the MODE button to engage the List mode.

2Press a coloured button to which a page has been assigned.

To exit the List mode, press the MODE button again.

13

Viewing teletext programmes

REVEAL ( ? )

Some teletext pages include hidden text (such as answers to a quiz).

You can display the hidden text.

Each time you press the REVEAL button, text is hidden or revealed.

HOLD ( 55 )

You can hold a teletext page on the screen for as long as you want, even while several other teletext pages are being received.

Press the HOLD button.

To cancel the HOLD function, press the HOLD button again.

STORE ( )

Press this to store the number of your favorite teletext pages in the List mode and call them up quickly using the coloured buttons.

CANCEL ( )

You can watch a TV programme even when in the teletext mode.

1Press the Number button to enter a page number, or press a coloured button.

The TV starts searching for a teletext page.

2Press the CANCEL button.

The TV programme appears.

When the TV finds the teletext page, its page number appears in the upper left of the screen.

3Press the CANCEL button to view the teletext page.

Pressing the CANCEL button cannot change the teletext mode to the TV mode.

INDEX ( i )

You can return to the index page instantly.

Press the INDEX button.

In the List mode:

Returns to the page number displayed in the lower left area of the screen.

SUBPAGE ( )

Some teletext pages include sub-pages that are automatically displayed.

You can hold any sub-page, or view it at any time.

1Press the SUBPAGE button to operate the Sub-page function.

2Press the Number buttons to enter a sub-page number.

Example:

3rd sub-page press 0, 0, 0 and 3.

You can also select a sub-page by pressing the red or green button.

To cancel the Sub-page function, press the SUBPAGE button again.

SIZE ( 55 )

You can double the height of the teletext display.

Press the SIZE button.

The teletext display changes cyclically.

14

Using the TV’s menus

This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus.

 

SYSTEM

CINEMA

PIP

 

COLOUR SOUND SURROUND

DISPLAY

 

 

ECO

DISPLAY

SENSOR

button

 

 

 

 

 

MENU

MENU t

MENU /

 

buttons

 

 

buttons

Ι/ΙΙ

TV/TEXT

TV/VIDEO

1 2 3

OFF

TIMER

4 5 6

PICTURE

MODE

7 8 9

CHANNEL RETURN+ SCAN

0 -/--

CHANNEL VOLUME

CHANNEL –/+ buttons

4Press the CHANNEL –/+ or the MENU / buttons to change function settings.

 

 

Example:

 

 

Changes the AUTO

 

 

 

 

 

 

 

 

SHUTOFF setting.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MENU

2

 

 

 

 

MENU

 

2

 

 

 

 

 

AUTO SHUTOFF

 

OFF

 

 

 

 

AUTO SHUTOFF

 

ON

 

 

 

 

 

CHILD LOCK

 

OFF

 

 

 

CHILD LOCK

 

OFF

 

 

 

 

 

BLUE BACK

 

ON

 

 

BLUE BACK

 

ON

 

 

 

 

 

VIDEO-2 SET

COMPONENT

 

 

VIDEO-2 SET

COMPONENT

 

 

 

 

SELECT BY

EXIT BY

 

 

 

SELECT BY

EXIT BY

 

 

 

 

OPERATE BY -+

DISPLAY

 

 

 

OPERATE BY -+

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

With some functions, the operation method may differ.

Basic operation

1Press the MENU T buttons.

One of the 6 menus is displayed.

MENU number

 

 

 

 

 

 

 

 

 

 

 

 

 

The icon

 

 

on the

 

 

 

 

 

MENU

1

 

 

 

 

 

 

 

INPUT

 

 

TV

 

left indicates the

 

 

 

VNR

ON

 

 

 

COMPRESS(16:9)

ON

currently selected

 

 

 

 

 

 

PICTURE TILT

00

function.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT BY

EXIT BY

 

 

 

 

 

 

OPERATE BY -+

DISPLAY

 

 

 

 

 

 

 

 

 

 

 

 

 

2Repeatedly press the MENU T buttons to display a desired menu.

If you hold down the y button, the next menu is displayed.

If the selected function is on the first line, pressing the r button displays the preceding menu.

3Repeatedly press the MENU T buttons to select a desired function.

5Press the DISPLAY button to turn the display off.

•To operate a menu using the buttons on the front panel of the TV, refer to “Operating menus” on page 25.

15

Using the TV’s menus

INPUT

You can view images from VCRs or other devices connected to your TV.

1Press MENU T to display the

“MENU 1” menu, then select “INPUT”.

 

 

 

MENU

1

 

 

 

INPUT

TV

 

 

 

VNR

ON

 

 

 

COMPRESS(16:9)

ON

 

 

 

PICTURE TILT

00

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “VIDEO-1”, “VIDEO-2” or “VIDEO-3”.

TV mode changes to VIDEO mode.

PICTURE TILT

<AV-29VS21/AV-29WS21/AV-29VX71/ AV-29WX11 only>

There are cases where the Earth’s magnetic force may make the picture tilt. If this happens, you can correct the picture tilt.

1Press MENU T to display the

“MENU 1” menu, then select “PICTURE TILT”.

 

 

 

MENU

1

 

 

 

INPUT

TV

 

 

 

VNR

ON

 

 

 

COMPRESS(16:9)

ON

 

 

 

PICTURE TILT

00

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

 

2Continue pressing CHANNEL –/+ or MENU / until the picture becomes level.

VNR

You can reduce picture noise.

1Press MENU T to display the

“MENU 1” menu, then select “VNR”.

 

 

MENU

1

 

 

INPUT

TV

 

 

VNR

ON

 

 

COMPRESS(16:9)

ON

 

 

PICTURE TILT

00

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “ON”.

To cancel the VNR function, select “OFF”.

COMPRESS (16:9)

This function converts a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio).

Use for pictures with a 16:9 aspect ratio that have been squeezed into a normal picture (4:3 aspect ratio), to restore their original dimensions.

1Press MENU T to display the

“MENU 1” menu, then select “COMPRESS (16:9)”.

 

 

MENU

1

 

 

INPUT

TV

 

 

VNR

ON

 

 

COMPRESS(16:9)

ON

 

 

PICTURE TILT

00

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “ON”.

To cancel the COMPRESS (16:9) function, select “OFF”.

If COMPRESS (16:9) is changed to ON while sub-picture is displayed, the subpicture will automatically be deleted.

16

Using the TV’s menus

AUTO SHUTOFF

You can set your TV to turn off if no signals are received for about 15 minutes or longer after the end of a broadcast.

1Press MENU T to display the

“MENU 2” menu, then select “AUTO SHUTOFF”.

 

 

MENU

2

 

 

AUTO SHUTOFF

ON

 

 

CHILD LOCK

ON

 

 

BLUE BACK

ON

 

 

VIDEO-2 SET

COMPONENT

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “ON”.

To cancel the AUTO SHUTOFF function, select “OFF”.

The AUTO SHUTOFF function does not turn off the TV’s main power.

The AUTO SHUTOFF will not work for a VIDEO mode.

CHILD LOCK

You can disable the front control buttons of the TV.

When this function is set to “ON”, the TV can be operated using only the remote control.

Use this function to prevent children from operating the TV without parental consent.

1Press MENU T to display the

“MENU 2” menu, then select “CHILD LOCK”.

 

 

MENU

2

 

 

AUTO SHUTOFF

ON

 

 

CHILD LOCK

ON

 

 

BLUE BACK

ON

 

 

VIDEO-2 SET

COMPONENT

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “ON”.

To cancel the CHILD LOCK function, select “OFF”.

The CHILD LOCK function is canceled when you turn the power off.

BLUE BACK

If no signal is being received or the signal is very weak, a blue back screen automatically becomes the picture background.

If you wish to contunue viewing the poor picture, you must set the BLUE BACK function to “OFF

1Press MENU T to display the

“MENU 2” menu, then select “BLUE BACK”.

 

 

MENU

2

 

 

AUTO SHUTOFF

ON

 

 

CHILD LOCK

ON

 

 

BLUE BACK

ON

 

 

VIDEO-2 SET

COMPONENT

 

SELECT BY

EXIT BY

 

OPERATE BY -+

DISPLAY

 

 

 

 

2Press CHANNEL –/+ or MENU / to select “ON”.

To cancel the BLUE BACK function, select “OFF”.

17

Loading...
+ 39 hidden pages