IMPRESSA S9/S7 avantgarde
Instructions for use
Art. Nr. 65855
1/06
Legend:
DISPLAY: serves as information.
|
DISPLAY: please follow the instructions shown. |
= Note |
= Important |
= Tip |
JURA Elektroapparate AG, CH-4626 Niederbuchsiten,
Internet http://www.jura.com
|
Fig. 1 |
|
|
Fig. 2 |
|
|
Fig. 3 |
|
|
Fig. 4 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 5 |
|
Fig. 6 |
|
Fig. 7 |
|
Fig. 8 |
2
1
3
|
Fig. 9 |
|
|
Fig. 10 |
|
|
Fig. 11 |
|
|
Fig. 12 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 13 |
|
|
Fig. 14 |
||
|
|
|
|
|
|
|
16 |
17 |
18 |
|
15 |
|
|
|
14 |
|
|
|
|
|
|
19 |
13 |
|
|
20 |
12 |
|
|
21 |
11 |
|
|
|
10 |
|
|
22 |
9 |
|
|
|
8 |
|
|
23 |
7 |
|
|
|
6 |
|
|
24 |
5 |
|
|
25 |
4 |
|
|
|
|
|
|
26 |
3 |
|
|
|
|
|
|
27 |
|
|
2 |
1 |
Description of the machine
1.Drip tray
2.Drip grate
3.Programming door
4.Rotary Switch
5.Selection key for pre-ground coffee
6.Coffee à la Carte key
7.1 Coffee key
8.2 Coffees key
9.1 Espresso key
10.2 Espressos key
11.ON / OFF key
12.Rinse key
13.Display dialog system
14.Water tank with handle
15.Aroma preservation cover
16.Bean tank cover
17.Lid for pre-ground coffee filler funnel
18.Height-adjustable coffee spout
19.Cup tray
20.Constant Steam key
21.Steam Portion key
22.Hot Water switch
23.Pivoting steam spout
24.2-stage frothing jet
25.Height-adjustable hot water spout
26.Coffee grounds bin
27.Power switch
Contents |
|
|
|
13.1 |
Programming the filter ............................... |
page 14 |
|
|
||
1. |
Safety information .............................................. |
page |
6 |
|
13.2 |
Programming your machine to the correct |
|
|
|
|
|
1.1 |
Warnings ................................................ |
page |
6 |
|
|
water hardness (only with FILTER NO) ........... |
page 14 |
|
|
|
1.2 |
Precautions |
page |
6 |
|
13.3 |
Maintenance |
page 14 |
|
|
|
|
|
|
|||||||
2. |
Before you start using the IMPRESSA S9/S7 |
|
|
|
13.4 |
Programming the amount of powder for coffee |
|
|
E |
|
|
........................................................avantgarde |
page |
6 |
|
|
............................................and espressso |
page 14 |
|
||
|
2.1 |
Checking the mains voltage .......................... |
page |
6 |
|
13.5 |
Setting the amount of water for coffee, |
|
|
|
|
2.2 |
Checking electrical fuse............................... |
page |
6 |
|
|
espresso and coffee à la carte........................ |
page 15 |
|
|
|
|
|
|
|
||||||
|
2.3 |
Filling the water tank ................................. |
page |
7 |
|
13.6 |
Programming the temperature for coffee, |
|
|
|
|
2.4 |
Filling the bean tank................................... |
page |
7 |
|
|
espresso and coffee à la carte........................ |
page 16 |
|
|
|
|
|
|
|
||||||
|
2.5 |
Adjusting the grinding gear .......................... |
page |
7 |
|
13.7 |
Programming the water portion..................... |
page 16 |
|
|
|
2.6 |
Power switch ............................................ |
page |
7 |
|
13.8 |
Programming the steam portion .................... |
page 16 |
|
|
3. |
First use ........................................................... |
page |
7 |
|
13.9 |
Economy mode.......................................... |
page 17 |
|
|
|
|
3.1 |
Cup illumination........................................ |
page |
8 |
|
13.10 |
Setting the time ........................................ |
page 18 |
|
|
4. |
Adjusting your machine to the water hardness............. |
page |
8 |
|
13.11 |
Programming the automatic switch-on time ...... |
page 18 |
|
|
|
5. |
Using a CLARIS plus filter cartridge........................ |
page |
9 |
|
13.12 |
Programming the automatic switch-off time ..... |
page 19 |
|
|
|
|
5.1 |
Installing the filter..................................... |
page |
9 |
|
13.13 |
Programming the language .......................... |
page 19 |
|
|
|
5.2 |
Changing the filter ..................................... |
page |
9 |
|
13.14 |
Programming the display ............................. |
page 20 |
|
|
6. |
Rinsing the machine............................................. |
page 10 |
|
13.15 |
Information.............................................. |
page 20 |
|
|
||
7. |
Making coffee (1 espresso, 2 espressos, 1 coffee, |
|
|
|
13.16 |
Resetting products to factory settings.............. |
page 21 |
|
|
|
|
2 coffees) .......................................................... |
page 10 |
14. |
Maintenance ...................................................... |
page 21 |
|
|
|||
|
7.1. |
Making coffee with pre-ground coffee powder.... |
page 10 |
|
14.1 |
Filling the water tank ................................. |
page 21 |
|
|
|
8. |
Making coffee à la carte ....................................... |
page 11 |
|
14.2 |
Emptying the coffee grounds......................... |
page 21 |
|
|
||
9. |
Making hot water................................................ |
page 11 |
|
14.3 |
Emptying the drip tray ................................ |
page 22 |
|
|
||
10. |
Drawing off steam ............................................... |
page 12 |
|
14.4 |
Drip tray missing ....................................... |
page 22 |
|
|
||
11. |
Frothing milk ..................................................... |
page 12 |
|
14.5 |
Filling the bean tank................................... |
page 22 |
|
|
||
|
11.1 |
Frothing one portion of milk (with the |
|
|
|
14.6 |
Removing stones from the grinding gear .......... |
page 22 |
|
|
|
|
2-stage frothing jet) ................................... |
page 12 |
|
14.7 |
Changing the filter ..................................... |
page 22 |
|
|
|
|
11.2 |
Frothing milk (with the 2-stage frothing |
|
|
|
14.8 |
Prompt to run cleaning cycle ........................ |
page 22 |
|
|
|
|
jet) ........................................................ |
page 12 |
|
14.9 |
Prompt to run decalcifying cycle .................... |
page 23 |
|
|
|
|
11.3 |
Attaching the Professional-Cappuccino Frother |
|
|
|
14.10 |
Emptying the system .................................. |
page 23 |
|
|
|
|
to the IMPRESSA ..................................... |
page 13 |
|
14.11 |
General cleaning instructions ........................ |
page 23 |
|
|
|
|
11.4 |
Making cappuccino and hot milk with the |
|
|
15. |
Cleaning ........................................................... |
page 23 |
|
|
|
|
|
Professional-Cappuccino Frother ................... |
page 13 |
16. |
Decalcifying....................................................... |
page 24 |
|
|
||
|
11.5 |
Cleaning the Professional-Cappuccino Frother |
|
|
17. |
Disposal............................................................ |
page 26 |
|
|
|
|
|
and jet .................................................... |
page 13 |
18. |
Tips for perfect coffee........................................... |
page 26 |
|
|
||
12. |
Switching the IMPRESSA S9/S7 avantgarde off......... |
page 13 |
19. |
Problems .......................................................... |
page 27 |
|
|
|||
13. |
Programming..................................................... |
page 14 |
20. |
Legal information ............................................... |
page 28 |
|
|
|||
|
|
|
|
|
21. |
Technical data.................................................... |
page 28 |
|
|
|
5
Before you begin
Congratulations on having bought this IMPRESSA S9/S7 avantgarde!
In order to ensure perfect operation of your IMPRESSA, carefully read this operating manual and keep it for future reference.
Should you need more information or meet with particular problems not specified in these operating instructions in sufficient detail, please contact JURA Elektroapparate AG directly or your local authorized dealer.
You will also find useful tips on operation and maintenance of the machine on our website at www.jura.com.
Don’t forget to check out the knowledge builder – our animated operating instructions. LEO, our assistant, will take you through all the functions.
1. Safety information
1.1 Warnings
Children are not aware of the dangers involved in using electric appliances. Therefore, never leave the machine unattended with unsupervised children around.
The coffee machine must only be used by persons who know how to operate it.
Never use a defective machine or a machine with a defective mains cable.
Never repair or open the coffee machine yourself. Repairs may only be carried out by authorized service shops using original spare parts and accessories.
Never immerse the IMPRESSA in water.
1.2.Precautions
Never expose the coffee machine to weather (rain, snow, frost), never touch the machine when your hands are wet.
Place the IMPRESSA on a firm, level base that is resistant to any water that may leak. Never stand on hot or warm surfaces (oven hobs). Keep out of the reach of children.
If you intend not to use the machine for a longer time (holidays, etc.), always turn off the power switch.
Always turn off the power switch before cleaning the machine.
When disconnecting the mains cable, never pull on the mains cable or the machine itself.
The IMPRESSA is connected to the mains supply via a mains cable. Make sure nobody can trip over the mains cable. Keep out of reach of children and pets.
Never put the coffee machine or parts of it into a dishwasher.
Make sure to install the machine at a place with sufficient air circulation to prevent it from overheating.
2.Before you start using
the IMPRESSA S9/S7 avantgarde
2.1 Checking the mains voltage
The coffee machine is preset to the correct mains voltage. Check if your local mains supply voltage complies with the information given on the type plate on the underside of the coffee machine.
2.2 Checking electrical fuse
The machine is designed for an electric current of 10 amperes. Check if the electrical fuse has sufficient capacity.
6
2.3 Filling the water tank
Only use fresh, cold water. Never fill the water tank with milk, mineral water or other liquids.
Take out the water tank and thoroughly rinse it out with cold tap water (Fig. 1).
Then fill it with water and place it back into the coffee machine. Make sure the tank is installed correctly and that it engages properly.
2.4 Filling the bean tank
To ensure your IMPRESSA will have a long service life and to avoid repairs, please note that the grinding gear is not suitable for coffee beans that have been treated with additives (e.g. sugar) during or after roasting. Coffee blends of this type may damage the machine’s grinding gear. Repair costs resulting from such use are not subject to the terms of guarantee.
Open the cover of the bean tank (Fig. 2) and remove the aroma preservation cover (15).
Remove any dirt or foreign matter from the bean tank.
Fill the bean tank with coffee beans (Fig. 2), replace the aroma preservation cover (15) and close the lid.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We recommend that you use:
a finer setting for a lighter roast a coarser setting for a darker roast
The grinding degree may only be adjusted while the grinding gear is running.
Open the lid of the bean tank (16).
To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to the required position.
The smaller the dots, the finer the grind The larger the dots, the coarser the grind
2.6 Power switch |
E |
Actuate the power switch (27) on your IMPRESSA before using the machine for the first time.
We recommend that you switch off your IMPRESSA with the power switch (27) if you intend not to use the machine for longer periods of time (e.g.during holidays)
3. First use
Press the power switch (27) on the back (bottom left) of the machine (Fig. 3).
The ON / OFF key 
(11) lights up to indicate that the machine has been switched on with the power switch.
Switch the machine on using the ON / OFF key 
(11). The light of the ON / OFF key goes off.
Open the programming door (3).
SPRACHE DEUTSCH
Turn the Rotary Switch (4) until the required language is displayed.
Example:
LANGUAGE ENGLISH
Confirm your selection by pressing the Rotary Switch (4).
FILL SYSTEM / PRESS STEAM
7
Place a receptacle under the 2-stage frothing jet (24) and press one of the Steam keys 
.
The system now fills up automatically. A little water will leak from the frothing jet.
SYSTEM FILLING
HEATING UP
PRESS RINSE
Place a cup under the height-adjustable coffee spout (18).
Press Rinse 
.
MACHINE RINSING
Now the water lines are flushed with fresh water. A little water will leak from the coffee spout (18).
SELECT PRODUCT
You can now make a product of your choice by pressing the corresponding key.
If FILL BEANS appears on the display, press one of the coffee product keys again. The grinder is not yet completely filled with coffee beans.
For a perfect frothing result, adjust the height-adjustable coffee spout (18) to the size of your cup (Fig. 4).
3.1 Cup illumination
The cup illumination puts your coffee in a good light, making it a treat for the eyes as well.
When you switch on the IMPRESSA or press any key, the cup illumination is activated for 1 minute.
4. Adjusting your machine to the water hardness
The IMPRESSA heats up water. As a result, calcification occurs during normal use. This is indicated automatically. The IMPRESSA must therefore be adjusted to the hardness of the water used. Use the supplied test sticks to determine the water hardness or contact your local waterworks.
1° German hardness is equivalent to 1.79° French hardness.
The water hardness programming step is no longer displayed if the filter is activated.
The IMPRESSA is preset to 16°dH. This setting can be changed. To do so, proceed as follows:
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
FILTER NO
Turn the Rotary Switch (4) until the following message is displayed:
HARDNESS 16°dH
Now press the Rotary Switch (4) to start programming.
16°dH
Now turn the Rotary Switch (4) until the required water hardness is set.
20°dH (example)
Confirm the selected setting by pressing the Rotary Switch (4).
HARDNESS 20°dH (example)
8
Now turn the Rotary Switch (4) until the following message is displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming mode.
SELECT PRODUCT
5. Using a CLARIS plus filter cartridge
When using the CLARIS plus filter cartridge correctly, decalcifying your IMPRESSA will no longer be necessary. For more information on the CLARIS plus filter cartridge refer to the brochure “CLARIS plus. Hard on limescale. Gentle on your coffee machine.”
5.1 Installing the filter
Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.
FILTER NO
Now press the Rotary Switch (4) to start programming.
Turn the Rotary Switch (4) until the following message is displayed:
FILTER YES
Confirm your setting by pressing the Rotary Switch (4).
INSERT
FILTER / PRESS STEAM
Take out the water tank (14). Empty out any remaining water. Fold up the cartridge holder (Fig. 1). Attach the extension piece (contained in the Welcome Pack) to the top of the CLARIS plus filter cartridge. Now insert the filter cartridge in the water tank, applying gentle pressure (Fig. 1)
Close the cartridge holder until it engages audibly.
Fill the water tank (14) with cold, fresh tap water and place it back into the machine.
Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys 
to start the filter rinsing process.
|
|
FILTER RINSING |
E |
Filter rinsing stops automatically. |
|||
|
|
SELECT PRODUCT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The water might be slightly discoloured (no hazard to health).
5.2 Changing the filter
After 50 litres of water the filter cartridge will need to be replaced. The display will prompt you to change the filter. Please monitor the period of use of the CLARIS plus filter cartridge (max. 2 months) using the scale on the cartridge holder by the water tank.
SELECT PRODUCT / CHANGE FILTER
The Rinse key 
lights up. Press Rinse 
.
INSERT FILTER / PRESS STEAM
Remove the water tank (14) from the IMPRESSA. Empty out any remaining water. Fold up the cartridge holder (Fig. 1). Attach the extension piece to the top of the CLARIS plus filter cartridge. Now insert the filter cartridge in the water tank, applying gentle pressure (Fig. 1)
Close the cartridge holder until it engages audibly.
Fill the water tank (14) with cold, fresh tap water and place it back into the machine.
9
Loading...